溴化钠水溶液体系中煤的电化学脱硫

煤炭脱硫技术包括:物理洗选、化学脱硫、生物脱硫、超声波脱硫和微波脱硫等[1～3]。物理洗选法脱硫最经济,但只能脱无机硫。生物、化学法脱硫不仅能脱无机硫,也能脱有机硫,但生产成本昂贵,距工业应用尚有一定距离。20世纪80年代出现的电化学脱硫技术是一种既能克服物理、化学等法的缺点,又能达到较好脱硫效果的洁净、温和的脱硫方法[4,5]。本文对电化学氧化脱硫进行了研究,探讨了电化学氧化法脱除煤中硫的适宜体系和条件。1　实验部分1 1　原料和试剂　实验采用山西平朔煤(Pingsucoal)为原料,煤样粒径小于0 125mm。对煤样进行硫分析,其…     

Fe~(3+)辅助煤浆氧化制氢研究

利用Fe~(3+)/Fe~(2+)电对的相互转化原理,在水热反应釜中用Fe~(3+)氧化煤浆得到Fe~(2+),将Fe~(2+)在电解槽中电解氧化,在阴极产生氢气,从而通过两步反应形成一个新的煤浆电氧化制氢工艺。进行了九次水热-电解循环实验,在恒电压(1V)条件下,测试了电解反应的电流密度和累积电量的数据,并对循环实验前期、中期、后期的三个阶段煤样品进行了扫描电镜(SEM)、比表面积(BET)、热重(TG)、红外光谱(FT-IR)等表征分析。研究表明,相对于通常煤浆电氧化制氢工艺,这种"两步法"煤浆制氢新工艺具有更高的反应速率,初始电流密度约为60 m A/cm2,而传统的"一步法"煤浆制氢工艺初始电流密度均不超过10 m A/cm~2。表征分析结果很好地反映了煤颗粒在这种制氢工艺过程中的形态、结构、成分的变化,从而解释了在新的煤浆氧化制氢工艺中的Fe~(3+)/Fe~(2+)转化的反应机理。     

电化学合成氨研究进展

氨是化学工业中最高产量的化学品之一,在全球经济中占重要地位.传统的合成氨工艺是Haber-Bosch法,该方法具有工作压力高、能耗高、转化率低以及CO_2排放量大等缺点.氮气电化学还原合成氨可以在常压条件下进行,并可由可再生电力提供动力,被认为是最有希望的Haber-Bosch工艺替代方法之一.本文概述了高温(t500℃)、中温(100℃t500℃)和低温(t100℃)下电化学合成氨的研究工作进展,并对电化学合成氨的发展趋势进行了预测.     

烯烃的选择性电化学氧化:研究进展与前景（英文）

烯烃类化合物,如乙烯和丙烯,是工业生产的关键原料,它们可以通过选择性氧化转化为环氧乙烷(EO)和环氧丙烷(PO)等高附加值的化学品.目前,烯烃类化合物转化主要通过热化学途径实现,通常需要高温高压条件,并可能导致过度氧化生成CO₂,因而选择性较低,且对经济和环境效益不友好.与此相对,电催化反应以电能作为驱动力,通过优化催化剂、电解液和反应电位等,有望在相对温和的条件下提高反应的选择性和能量效率,为高选择性烯烃氧化提供一种潜在策略.然而,当前烯烃的电化学选择性氧化的电流密度较低,整体生产成本相对较高,因此,有必要进一步研发高效且稳定的电化学选择性氧化烯烃的体系.本文综述了近期关于烯烃选择性电化学氧化的研究进展,研究主要集中在两个方面:一是烯烃在电极和电解液界面上直接进行电化学氧化的方法;二是通过电化学反应原位生成氧化剂(如Cl₂和H₂O₂)后,再对烯烃进行氧化的间接方法.对于烯烃的直接电化学氧化,反应的选择性可以通过调控几何效应和电子效应来优化.具体来说,通过引入如氯离子这样的物种,减少催化剂表面的可用...     

煤基前沥青烯的FeS+S催化加氢动力学研究

为了优化煤直接液化工艺条件和提高油收率,本研究利用30 mL高压管式反应釜研究了煤直接液化重质产物前沥青烯加氢液化行为,考察了FeS+S催化剂下反应温度(380、400、420和440℃)、液化时间(0、5、10、20、30和60 min)、5.0 MPa氢初压和四氢萘溶剂条件下前沥青烯液化转化行为,同时考察了前沥青烯...     

基于聚丙烯酰胺凝胶软印章的电化学纳米加工(英文)

电化学刻蚀使用腐蚀性小的电解质溶液,且溶液可使用周期长,是一种环境友好的加工工艺.本文采用聚丙烯酰胺水凝胶(PAG)作为软印章,辅以优化工艺,将电化学湿印章技术(E-WETS)的加工精度从几十微米提高到了200纳米.将新配制的聚丙烯酰胺水凝胶浇注在具有纳米结构的软模板表面,固化后脱模并保存于0.2mol·L-1KCl溶液中,在合适电位和压力下,对硅片表面金膜进行电化学湿法刻蚀,分别研究了聚丙烯酰胺水凝胶的聚合条件、电化学加工电位以及水凝胶表面压力对加工结果的影响.实验表明,在最优条件下可加工出直径为200纳米的特征点阵结构,且该方法具有较好的可靠性和稳定性。     

温度与碱浓度对FeO2-4/FeO-2体系电化学行为的影响

研究了影响Fe(OH)3进行酸式电离反应的因素,在多种浓度和温度条件下的NaOH浓溶液中采用SnO2-Sb2O3/Ti电极,研究FeO24-/FeO-2体系的电化学氧化还原反应参数及其变化趋势,结果证实该体系发生电化学氧化还原反应的最佳碱溶液浓度范围为12～14 mol/L,最佳温度范围为295～315 K.阐明了在实验条件下FeO24-/FeO-2氧化还原体系中存在由FeO:-/FeO-2构成的氧化还原电对,而FeO24-不直接与FeO-2构成氧化还原电对;并给出了FeO24-/FeO-2氧化还原体系的Latimer图.     

超高相对分子质量聚丙烯腈基多孔中空氧化纤维的制备工艺研究

以超高相对分子质量聚丙烯腈基多孔中空纤维为原丝制备了多孔中空氧化纤维 ,研究了其制备工艺 .详细考察了氧化工艺条件 (温度、时间 )对多孔中空氧化纤维环化程度的影响 ,发现环化程度随氧化温度升高和氧化时间延长而提高 ;与以普通分子质量聚丙烯腈基实心纤维为原丝相比 ,氧化温度应较低 (<2 4 0℃ )、氧化时间应较短 (<2h) .     

芳腈化合物的成对电化学合成

采用循环伏安法(CV)和恒电流电解法(CCE)研究了对甲氧基苯甲醇(p-MeOC_6H_4CH_2OH)电化学氧化氰化合成相应芳腈化合物.考察了水的体积分数、硫酸浓度、电解温度、电极材料、电流密度和溶剂等因素对该电化学氧化氰化行为的影响.结果显示,以四丁基高氯酸铵(Bu_4NClO_4)为电解质,羟胺(HAM)为氮源,在含0.15mol·L~(-1)H_2SO_4及30%水的DMSO体系中,电流密度为10 mA/cm~2条件下恒温60℃电解8 h,对甲氧基苯腈(p-MeOBN)的收率为90%.通过对反应底物普适性研究,发现含不同对位和邻位取代基的芳香伯醇均可通过电氧化氰化反应有效转化为相应的腈(61%～92%),并提出了该电氧化氰化反应的可能机理.本工作提出了一种在一室型无隔膜电解槽中,以原位生成醛的方式,无需加入额外的催化剂,通过阴阳两极协同反应的成对电化学合成腈类化合物的方法.     

新型光固化环氧丙烯酸酯乳液的制备及其防腐性能研究

将环氧树脂和非离子型表面活性剂在一定温度下与丙烯酸反应合成出改性环氧丙烯酸酯树脂,再利用相反转乳化法制备得到光固化水性环氧乳液。对该反应的原料种类、反应条件、以及乳化工艺进行了优化研究,并对不同条件下得到的乳液进行了综合性能评价。着重考察了环氧树脂的种类以及光引发剂的种类对乳液粒径、清漆膜电化学防腐性能和耐盐雾性能的影响。结果表明:选取环氧树脂E20,光引发剂IRGACURE651,酯化反应温度为105℃,反应时间3h,乳化温度为25℃~30℃,搅拌速度为800r/min时,制得的乳液稳定性和漆膜性能(包括漆膜的力学性能、电化学防腐性能和耐盐雾性能)最佳。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.