Liquid oxygen compatibility and thermal stability of bisphenol A and bisphenol F epoxy resins modified by DOPO

Bisphenol A and bisphenol F epoxy resins (BA and BF) were chemically modified by 9,10‐Dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide to improve their liquid oxygen compatibility. The structures of the modified epoxy resins were confirmed by Fourier transform infrared spectroscopy. Significant enhancement of liquid oxygen compatibility for the modified resins was detected according to the liquid oxygen mechanical impact test. Thermogravimetric analysis showed that during the degradation in oxygen atmosphere, the modified resins exhibited much lower weight loss rate and possessed much higher char residues than the control ones. Based on limited oxygen index test, better flame retardancy was also observed for the modified resins. In addition, the modified BA system was more excellent than the modified BF system in liquid oxygen compatibility, thermal stability, and flame retardancy. X‐ray photoelectron spectroscopy analysis showed that after the liquid oxygen impact, the modified resins was still in oxidation stage and the control ones already begun to decompose and char. It could be attributed to formation of the phosphoric oxyacid on the surface of the modified resins, which prevented decomposition and inhibited the reaction between the specimen and liquid oxygen. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of a novel phosphorus‐containing curing agent and its effects on the flame retardancy,thermal degradation and moisture resistance of epoxy resins

A novel phosphorus‐containing compound diphenyl‐(1, 2‐dicarboxylethyl)‐phosphine oxide defined as DPDCEPO was synthesized and used as a flame retardant curing agent for epoxy resins (EP). The chemical structure of the prepared DPDCEPO was well characterized by Fourier transform infrared spectroscopy, and ¹H, ¹³C and ³¹P nuclear magnetic resonance. The DPDCEPO was mixed with curing agent of phthalic anhydride (PA) with various weight ratios into epoxy resins to prepare flame retardant EP thermosets. The flame retardant properties, combustion behavior and thermal analysis of the EP thermosets were respectively investigated by limiting oxygen index (LOI), vertical burning tests (UL‐94), cone calorimeter measurement, dynamic mechanical thermal analysis and thermogravimetric analysis (TGA) tests. The surface morphologies and chemical compositions of the char residues for EP thermosets were respectively investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy (XPS). The water resistant properties of the cured EP were evaluated by putting the samples into distilled water at 70°C for 168 hr. The results revealed that the EP/20 wt% DPDCEPO/80 wt% PA thermosets successfully passed UL‐94 V‐0 flammability rating and the LOI value was as high as 33.2%. The cone test results revealed that the incorporation of DPDCEPO effectively reduced the combustion parameters of the epoxy resin thermosets, such as heat release rate and total heat release. The dynamic mechanical thermal analysis test demonstrated that the glass transition temperature (Tg) decreased with the increase of DPDCEPO content. The TGA results indicated that the incorporation of DPDCEPO promoted the decomposition of epoxy resin matrix ahead of time and led to a higher char yield and thermal stability at high temperatures. The surface morphological structures and analysis of the XPS of the char residues of EP thermosets revealed that the introduction of DPDCEPO benefited the formation of a sufficient, compact and homogeneous char layer with rich flame retardant elements on the epoxy resin material surface during combustion. The mechanical properties and water resistance of the cured epoxy resins were also measured. After water resistance tests, the EP/20 wt% DPDCEPO/80 wt% PA thermosets retained excellent flame retardancy, and the moisture adsorption of the EP thermosets decreased with the increase of DPDCEPO content in EP thermosets because of the existence of the P–C bonds and the rigid aromatic hydrophobic structure in DPDCEPO. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly efficient multielement flame retardant for multifunctional epoxy resin with satisfactory thermal,flame‐retardant,and mechanical properties

Multifunctional epoxy resins with excellent, thermal, flame‐retardant, and mechanical properties are extremely important for various applications. To solve this challenging problem, a novel highly efficient multielement flame retardant (PMSBA) is synthesized and the flame‐retardant and mechanical properties of modified epoxy resins are greatly enhanced without significantly altering their and thermal properties by applying the as‐synthesized PMSBA. The limiting oxygen index value reaches up to 29.6% and could pass the V‐0 rating in the UL‐94 test with even low P content (0.13%). Furthermore, cone calorimetry results demonstrate that 30.3% reduction in the peak heat release rate for the sample with 10.0 wt% PMSBA is achieved. X‐ray photoelectron spectroscopy and scanning electron microscopy indicate that Si‐C, Si‐N, and phosphoric acid derivative can be transformed into a multihole and intumescent char layer as an effective barrier, preserving the epoxy resin structure from fire. More importantly, mechanical properties such as impact strength, tensile strength, and flexural strength are also increased by 63.86%, 33.54%, and 15.65%, respectively, which show the incorporation of PMSBA do not deteriorate the mechanical properties of modified epoxy resins. All the results show that PMSBA is a promising strategy for epoxy resin with satisfactory, thermal, flame‐retardant, and mechanical properties.     

含磷有机硅杂化环氧树脂固化体系性能研究

通过磷酸与γ-环氧丙氧基三甲氧基硅烷反应得到含磷有机硅氧烷,并加入到环氧树脂/4,4'-二氨基二苯基甲烷体系中混合,通过溶胶-凝胶的方法制备了含磷有机硅杂化环氧树脂固化物.对固化体系进行了玻璃化转变温度、热失重、阻燃、拉伸强度、冲击强度测试分析.结果表明,该固化体系的阻燃性得到提高,极限氧指数在25.8～29.3,玻璃化转变温度得到提高,在161～179℃;虽然初始分解温度比纯环氧树脂固化物低,但800℃残炭率可以达到26.5%,提高了36%;拉伸强度得到提高,在71～94 MPa,冲击强度可以达到14.36 kJ/m2,提高了14%.该固化体系具有较好的阻燃性能和热性能,同时具有较好的力学性能.     

Vanillin‐derived phosphorus‐containing compounds and ammonium polyphosphate as green fire‐resistant systems for epoxy resins with balanced properties

Flame retardants from vanillin when utilized together with ammonium polyphosphate (APP) yield excellent synergistic flame retardancy toward epoxy resins. Bisphenol A epoxy resins have been widely used due to their excellent mechanical properties, chemical resistance, electrical properties, adhesion, etc., while they are flammable. Environment‐friendly and bio‐based flame retardants have captured increasing attention due to their ecological necessity. In this paper, 3 bio‐based flame retardants were synthesized from abundant and more importantly renewable vanillin, and their chemical structures were determined by ¹H NMR and ¹³C NMR. They were used together with APP (an environment‐friendly commercial flame retardant) to improve the fire resistance of bisphenol A epoxy resin. With the addition APP content of 15 phr, the modified bisphenol A epoxy resin could reach UL‐94V0 rating during vertical burning test and limit oxygen index values of above 35%, but reducing APP content to 10 phr, the flame retardancy became very poor. With the total addition content of 10 phr, the epoxy resins modified by 7 to 9 phr APP and 1 to 3 phr bio‐based flame retardants with epoxy groups or more benzene rings showed excellent flame retardancy with UL‐94V0 rating and limit oxygen index values of around 29%. The T_gs of the epoxy resins could be remained or even increased after introducing bio‐based flame retardants, as the control; those of APP alone‐modified epoxy resins compromised a lot. The green synergistic flame‐retardant systems have a great potential to be used in high‐performance materials.     

Curing of liquid epoxy resin in plasma discharge

Epoxy resins in the solid state, liquid state and during polymerisation were treated by microwave oxygen plasma and analysed by FTIR spectra. Curing, etching and oxidation kinetics of epoxy resin were observed. In the liquid resin and polymerising mixture the effect of structure modification was observed more intensively than in the case of solid sample due to a mixing process. A modification of bulk layers of liquid epoxy resin was observed under plasma action. The polymerisation reaction of epoxy resin with amine hardening agent can be released in plasma discharge at low pressure.     

Thermal and flame retardant properties of epoxy resin cured by a novel phosphorus-containing 4,4′-bisphenol novolac curing agent

A novel flame retardant curing agent for epoxy resin (EP), i.e., a DOPO (9,10-dihydro-9-oxa-10-phosphaphenan-threne-10-oxide)-containing 4,4'-bisphenol novolac (BIP-DOPO) was synthesized and characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR spectroscopy, and gel permeation chromatography. The epoxy resin cured by BIP-DOPO itself or its mixture with a commonly used bisphenol A-formaldehyde novolac resin (NPEH720) was prepared. The flame retardancy of the cured EP thermosets were studied by limiting oxygen index (LOI), UL 94 and cone calorimeter test (CCT), and the thermal properties by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results show that the cured epoxy resin EPNP/BI/3/1, which contains 2.2% phosphorus, possesses a value of 26.2% and achieves the UL 94 V-0 rating. The data from cone calorimeter test demonstrated that the peak release rate, average heat release rate, total heat release decline sharply for the flame retarded epoxy resins, compared with those of pure ones. DSC results show that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA indicates that the incorporation of BIP-DOPO promotes the decomposition of epoxy resin matrix ahead of time and leads to higher char yield. The surface morphological structures of the char residues reveal that the introduction of BIP-DOPO benefits to the formation of a continuous and solid char layer on the epoxy resin material surface during combustion.     

Flammability and thermal degradation of epoxy acrylate modified with phosphorus‐containing compounds

A series of UV‐curable flame retardant resins was obtained using epoxy acrylate (EA) modified with 1‐oxo‐4‐hydroxymethyl‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane (PEPA). The flammability was characterized by limiting the oxygen index (LOI), UL 94 and cone calorimeter, and the thermal degradation of the flame retardant resins was studied using thermogravimetric analysis (TGA) and real time Fourier transform infrared (RTFTIR). The results indicated that the flame retardant efficiency increases and the heat release rate (HRR) decreases greatly with the content of PEPA. The TG data showed that the modified epoxy acrylates (MEAs) have lower initial decomposition temperatures and higher char residues than pure EA. The RTFTIR study indicates that the MEAs have lower thermal oxidative stability than the pure EA. Copyright © 2009 John Wiley & Sons, Ltd.     

Imidazole‐type thermal latent curing agents with high miscibility for one‐component epoxy thermosetting resins

Epoxy resins are important thermosetting resins widely employed in industrial fields. Although the epoxy–imidazole curing system has attracted attention because of its reactivity, solidification of a liquid epoxy resin containing imidazoles proceeds gradually even at room temperature. This makes it difficult to use them for one‐component epoxy resin materials. Though powder‐type latent curing agents have been used for one‐component epoxy resin materials, they are difficult to apply for fabrication of fine industrial products due to their poor miscibility. To overcome this situation and to improve the shelf life of epoxy–imidazole compositions, we have developed a liquid‐type thermal latent curing agent 1 , generating an imidazole with a thermal trigger via a retro‐Michael addition reaction. The latent curing agent 1 has superior miscibility toward epoxy resins; in addition, it was confirmed that the epoxy resin composition has both high reactivity at 150 °C, and long‐term storage stability at room temperature. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2680–2688     

Colour development and luminescence phenomena in epoxy glasses

The process of colour development in aromatic-amine cured epoxy resin glasses following exposure to oxygen has been studied using electron spin resonance (ESR) and thermoluminescence (TL). Even short duration exposure to oxygen was found to produce species in glassy epoxy resins which gave rise to TL when heated from room temperature to a temperature just below the cure temperature. In some epoxy samples, oxygen exposure over longer periods was found to produce sample colouration. UV-visible spectrophotometry revealed chromophores which were believed to arise from the diaminodiphenylmethane structural unit found in epoxy systems containing the resin, N,N,N′,N′-tetraglycidyl-4,4′-diaminodiphenylmethane (TGDDM) or the curing agent, 4,4′-diaminodiphenylmethane (DDM). The chromophore produced in TGDDM-based resins appeared to be simlar to the "Wurster's salt'-type structure produced by photo-ionization of these systems. A distinctive ESR spectrum was also noted for samples exposed to oxygen. These results are indicative of both peroxide group formation on the methylene groups as well as the formation of amine centred radical cations, and are consistent with the oxidative sensitivity of these epoxy resins. The TL is believed to result from the thermally induced recombination of the 'Wurster's salt'-like cations with peroxy anions leading to the production of an electronically excited diaminobenzophenone structure © 1998 John Wiley & Sons, Ltd.     

Synthesis and properties of a phosphorus-containing flame retardant epoxy resin based on bis-phenoxy (3-hydroxy) phenyl phosphine oxide

A reactive phosphorus-containing compound, bis-phenoxy (3-hydroxy) phenyl phosphine oxide (BPHPPO) was first successfully synthesized to produce the phosphorus-containing flame retardant epoxy resin (BPHPPO-EP). The chemical structures were characterized from FTIR, MS, NMR spectra and elemental analyses. Thermal degradation behaviors and flame retardant properties of the cured epoxy resins were investigated from the thermogravimetric analysis (TGA) and the limiting oxygen index (LOI) test using 4,4′-diaminodiphenylsulfone (DDS) as curing agent. The high char yields and the high limiting oxygen index values were found to certify the great flame retardancy of this phosphorus-containing epoxy resin.     

Flame retardant epoxy resins based on diglycidyloxymethylphenylsilane

Silicon‐containing epoxy resins were prepared from diglycidyloxymethylphenyl silane (DGMPS) and diglycidylether of bisphenol A (DGEBA) by crosslinking with 4,4′‐diaminodiphenylmethane (DDM). Several DGMPS/DGEBA molar ratios were used to obtain materials with different silicon contents. Their thermal, dynamomechanical, and flame‐retardant properties were evaluated and related to the silicon content. The weight loss rate of the silicon‐containing resins is lower than that of the silicon free resin. Char yields under nitrogen and air atmospheres increase with the silicon content. The LOI (limited oxygen index) values increased from 24 for a standard commercial resin to 36 for silicon‐containing resins, demonstrating improved flame retardancy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5580–5587, 2006     

Synthesis of novel boron‐containing epoxy–novolac resins and properties of cured products

Epoxy–novolac resins were synthesized by modifying a commercial novolac resin with epichlorohydrin. These epoxy–novolac resins were characterized and further modified with different contents of bis(benzo‐1,3,2‐dioxa‐borolanyl)oxide or bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxa‐borolanyl)oxide. The boron‐containing epoxy–novolac resins were autocatalytically crosslinked or crosslinked with BF₃MEA and their thermal stability and flame retardancy were determined by thermogravimetric analysis and limiting oxygen index (LOI) values. These LOI values for the bis(benzo‐1,3,2‐dioxa‐borolanyl)oxide derivatives were higher than the boron‐free novolac resins, which shows the benefit of the presence of boron. To test the role of boron in the enhancement of flammability, scanning electronic microscopy and energy‐dispersive X‐ray spectroscopy images were made. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6332–6344, 2006     

Metal compound-enhanced flame retardancy of intumescent epoxy resins containing ammonium polyphosphate

A series of intumescent flame-retardant epoxy resins (IFR-EPs) were prepared only by adding a 5 wt% total loading of ammonium polyphosphate (APP) and metal compounds. All the samples could achieve V-0 rating and did not generate dripping during UL-94 testing. The limiting oxygen index (LOI) values of the samples with 4.83 wt% APP and 0.17 wt% CoSA increase from 27.1 to 29.4, compared with epoxy resin containing 5 wt% APP. The samples also showed excellent water resistance of flame retardancy in 30 °C and 70 °C water for 168 h. The LOI results show that the composition of metal compounds (metal ions and ligands/anions) and the mass ratios of APP to metal compounds affect the flame retardancy of the samples. TG results indicate that the catalytic effect of CoSA on the decomposition of both APP and the epoxy resins containing APP is better than that of CuSAO. The fire behavior of epoxy resin and epoxy resins containing APP with/without CoSA were investigated by cone calorimeter. Cone calorimeter parameters of the samples such as HRR, THR, TSP and COP indicate that the addition of APP and CoSA improves the fire safety of epoxy resin significantly, and CoSA shows an obvious catalytic effect.     

Novel toughened cyanate ester resin with good dielectric properties and thermal stability by copolymerizing with hyperbranched polysiloxane and epoxy resin

A novel toughened cyanate ester (CE) resin with good dielectric properties and thermal stability was developed by copolymerizing 2,2′‐bis(4‐cyanatophenyl)iso‐propylidene (BCE) with a combined modifier (HBPSiEP) made up of hyperbranched polysiloxane (HBPSi) and epoxy (EP) resin. HBPSi was synthesized through the hydrolysis of 3‐(trimethoxysilyl)propyl methacrylate. The effect of differing stoichiometries of HBPSiEP on the curing characteristics and performance of BCE resin is discussed. Results show that the incorporation of HBPSiEP can not only effectively promote the curing reaction of BCE, but can also significantly improve the toughness of the cured BCE resin. In addition, the toughening effect of HBPSiEP is greater than single EP resin. For example, the impact strength of modified BCE resin with 30 wt% of HBPSiEP is 23.3 KJ/m², which is more than 2.5 times of that of pure BCE resin, while the maximum impact strength of EP/BCE resin is about 2 times of pure BCE resin. It is worthy to note that HBPSiEP/BCE resins also exhibit improved thermal stability, dielectric properties, and flame retardancy, suggesting that the novel toughened CE resins have great potentiality to be used as a matrix for advanced functional composites or electronic packing resins. Copyright © 2009 John Wiley & Sons, Ltd.     

Epoxy resins from novel monomers with a bis‐(9,10‐dihydro‐9‐oxa‐10‐oxide‐10‐phosphaphenanthrene‐10‐yl‐) substituent

A new diepoxide and a new diamine, both bearing bis‐(9,10‐dihydro‐9‐oxa‐10‐oxide‐10‐phosphaphenanthrene‐10‐yl‐)‐substituted methylene linkages, were prepared through the reaction of 9,10‐dihydro‐oxa‐10‐phosphaphenanthrene‐10‐oxide with benzophenone derivatives via a simple addition reaction followed by a dehydration reaction. These two compounds were used as monomers for preparing cured epoxy resins with high phosphorus contents. The resultant epoxy resins showed high glass‐transition temperatures (between 131 and 196 °C). All of the cured epoxy resins exhibited high thermal stability, with 5% weight loss temperatures over 316 °C, and excellent flame retardancy, with limited oxygen index values of 37–50. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 359–368, 2002     

含硅磷杂化物环氧树脂固化物性能研究

首先用γ-环氧丙氧基三甲氧基硅烷(KH-560)和亚磷酸二乙酯(DEP)反应的中间产物进行水解缩合反应,合成了一种含磷低聚硅氧烷杂化物.并用FTIR,NMR,GPC对其结构及分子量进行了表征.然后将含磷低聚硅氧烷引入到双酚A环氧树脂(E-54)制备硅磷杂化物环氧树脂的固化物.对这种含硅磷杂化物环氧树脂固化物的性能研究发现其极限氧指数为23～29,DSC分析结果玻璃化转变温度(Tg)可以达到204℃,失重5%的温度(Td)5%比纯E-54提高近20℃.该固化物具有阻燃性能,同时具有较好的热性能。     

Flame‐retardant epoxy resins: An approach from organic–inorganic hybrid nanocomposites

Phosphorus‐containing epoxy‐based epoxy–silica hybrid materials with a nanostructure were obtained from bis(3‐glycidyloxy)phenylphosphine oxide, diaminodiphenylmethane, and tetraethoxysilane in the presence of the catalyst p‐toluenesulfonic acid via an in situ sol–gel process. The silica formed on a nanometer scale in the epoxy resin was characterized with Fourier transform infrared, NMR, and scanning electron microscopy. The glass‐transition temperatures of the hybrid epoxy resins increased with the silica content. The nanometer‐scale silica showed an enhancement effect of improving the flame‐retardant properties of the epoxy resins. The phosphorus–silica synergistic effect on the limited oxygen index (LOI) enhancement was also observed with a high LOI value of 44.5. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 986–996, 2001     

Miscibility and intermolecular specific interactions in thermosetting blends of bisphenol S epoxy resin with poly(ethylene oxide)

Thermosetting blends composed of phloroglucinol‐cured bisphenol S epoxy resin and poly(ethylene oxide) (PEO) were prepared via the in situ curing reaction of epoxy in the presence of PEO, which started from initially homogeneous mixtures of diglycidyl ether of bisphenol S, phloroglucinol, and PEO. The miscibility of the blends after and before the curing reaction was established on the basis of thermal analysis (differential scanning calorimetry). Single and composition‐dependent glass‐transition temperatures (T_g's) were observed for all the blend compositions after and before curing. The experimental T_g's could be explained well by the Gordon–Taylor equation. Fourier transform infrared spectroscopy indicated that there were competitive hydrogen‐bonding interactions in the binary thermosetting blends upon the addition of PEO to the system, which was involved with the intramolecular and intermolecular hydrogen‐bonding interactions, that is, OH···O?S, OH···OH, and OH, versus ether oxygen atoms of PEO between crosslinked epoxy and PEO. On the basis of infrared spectroscopy results, it was judged that from weak to strong the strength of the hydrogen‐bonding interactions was in the following order: OH···O?S, OH···OH, and OH versus ether oxygen atoms of PEO. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 359–367, 2005     

Enhanced thermal properties and flame retardancy from a thermosetting blend of a phosphorus‐containing bismaleimide and epoxy resins

Epoxy resins modified by an organosoluble phosphorus‐containing bismaleimide (3,3′‐bis(maleimidophenyl) ­phenylphosphine oxide; BMPPPO) were prepared by simultaneously curing epoxy/diaminodiphenylmethane (DDM), and BMPPPO. The resulted epoxy resins were found to exhibit glass transition temperatures as high as 212 °C, thermal stability at temperatures over 350 °C, and excellent flame retardancy with Limited oxygen index (LOI) values around 40. Incorporation of BMPPPO into epoxy resins via the thermosetting blend was demonstrated to be an effective way to enhance the thermal properties and flame retardancy simultaneously. Copyright © 2003 John Wiley & Sons, Ltd.