Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Water‐soluble hyperbranched polyelectrolytes with high fluorescence quantum yield: Facile synthesis and selective chemosensor for Hg2+ and Cu2+ ions

New water‐soluble hyperbranched polyfluorenes bearing carboxylate side chains have been synthesized by the simple “A2 + B2 + C3” protocol based on Suzuki coupling polymerization. The linear polyfluorene analogue LPFA was also synthesized for comparative investigation. The optical properties of the neutral precursory polymers in CHCl₃ and final carboxylic‐anionic conjugated polyelectrolytes in buffer solution were investigated. The obtained hyperbranched polyelectrolyte HPFA2 with lower content of branch unit (2%) showed excellent solubility and high fluorescence quantum yield (?_F = 89%) in aqueous solution. Fluorescence quenching of HPFA2 by different metal ions was also investigated, the polyelectrolyte showed high selectivity for Hg²⁺ and Cu²⁺ ions relative to other various metal ions in buffer solution. The Stern‐Volmer constant K_sv was determined to be 0.80 × 10⁶ M^?1 for Hg²⁺ and 3.11 × 10⁶ M^?1 for Cu²⁺, respectively, indicating the potential application of HPFA2 as a highly selective and sensitive chemosensor for Hg²⁺ and Cu²⁺ ions in aqueous solution. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3431–3439, 2010     

Synthesis of poly(p‐phenylene vinylene)‐ and poly(phenylene ethynylene)‐based polymers containing p‐terphenyl in the main chain with alkoxyphenyl side groups

Starting from the pyrylium salt and following a facile synthetic route, we synthesized and polymerized 4,4″‐diiodo‐2′,6′‐di[4‐(2′‐ethylhexyl)oxy]phenyl‐p‐terphenyl with p‐divinylbenzene or p‐diethynylbenzene. The resulting polymers had moderate molecular weights, were amorphous, and dissolved in tetrahydrofuran and chloroform, with glass‐transition temperatures of 120–131 °C. The polymers behaved as violet‐blue‐emitting materials with photoluminescence maxima around 420 and 450 nm in solution and in thin films, respectively. They possessed well‐defined chromophores resulting from steric interactions in the polymer chain. The photoluminescence quantum yields were up to 0.29. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2591–2600, 2002     

Water‐soluble poly(ethylene oxide)‐block‐poly(p‐phenylene vinylene) copolymer: Synthesis and characterization

Water‐soluble and photoluminescent block copolymers [poly(ethylene oxide)‐block‐poly(p‐phenylene vinylene) (PEO‐b‐PPV)] were synthesized, in two steps, by the addition of α‐halo‐α′‐alkylsulfinyl‐p‐xylene from activated poly(ethylene oxide) (PEO) chains in tetrahydrofuran at 25 °C. This copolymerization, which was derived from the Vanderzande poly(p‐phenylene vinylene) (PPV) synthesis, led to partly converted PEO‐b‐PPV block copolymers mixed with unreacted PEO chains. The yield, length, and composition of these added sequences depended on the experimental conditions, namely, the order of reagent addition, the nature of the monomers, and the addition of an extra base. The addition of lithium tert‐butoxide increased the length of the PPV precursor sequence and reduced spontaneous conversion. The conversion into PPV could be achieved in a second step by a thermal treatment. A spectral analysis of the reactive medium and the composition of the resulting polymers revealed new evidence for an anionic mechanism of the copolymerization process under our experimental conditions. Moreover, the photoluminescence yields were strongly dependant on the conjugation length and on the solvent, with a maximum (70%) in tetrahydrofuran and a minimum (<1%) in water. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4337–4350, 2005     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

Water‐soluble meta‐poly(phenylene ethynylene) oligomers with stable helical secondary structure

Two novel water‐soluble meta‐poly(phenylene ethynylene) (mPPE) copolymers were synthesized and characterized, each contained ester and amine functional groups attached to exohelix positions on the phenylene rings and one contained methoxy endohelix functional groups. Secondary structure formation was investigated for these materials in aqueous solutions using ultraviolet and fluorescence spectroscopy. Additionally, the folding behaviors are reported for the mPPEs and their protected amine precursors in other protic and aprotic solvents. Results indicate that both mPPEs are able to form stable helical structures in water, while only the nonmethoxylated polymer exhibited a helical structure in acetonitrile and several alcohols. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly‐p‐phenylenevinylene‐g‐poly(2‐(methacryloyloxy)Ethyl)trimethylammonium chloride (PPV‐g‐PMETAC): A fluorescent,water‐soluble,selective anion sensor

The photophysical and ion‐sensing properties of densely grafted conjugated polymer poly‐p‐phenylenevinylene‐g‐poly(2‐(methacryloyloxy)ethyl)trimethylammonium chloride (PPV‐g‐PMETAC) are presented herein. The grafted polymer exhibits excellent iodide‐sensing which is easily observed using fluorescence spectroscopy. The iodide detection limit for PPV‐g‐PMETAC was found to be 10 nM and was independent of temperature and pH <12. The change in fluorescence of PPV‐g‐PMETAC, upon exposure to iodide, was attributed to polymer aggregation due to changes in the morphology of the grafted PMETAC side chains, which was observed using atomic force microscopic and dynamic light scattering studies. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1997–2003     

Para‐linked and meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s: Conformational changes and their effects on iron–sulfur protein detection

Four para‐linked or meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s (PAEs) were synthesized to investigate the solvent‐induced π‐stacked self‐assembly. These PAE backbones are composed of fluorenylene and phenylene units, which are alternatively linked by ethynylene bonds. UV–vis absorption and photoluminescence spectra were used to study their conformational changes as solvent was gradually changed from MeOH to H₂O. In pure water, with gradually increased meta‐phenylene content (0, 50, and 100%), they underwent a gradual transition process of conformation from disordered aggregate structure to helix structure, which was not compactly folded. Moreover, the polymer with an ammonium‐functionalized side chain on the meta‐phenylene unit appeared to adopt a more incompact or extended helix conformation than the corresponding one without this side chain. Furthermore, the conformational changes of these cationic PAEs in H₂O were used to study their effects on biological detection. Rubredoxin (Rd), a type of anionic iron–sulfur‐based electron transfer protein, was chosen to act as biological analyte in the fluorescence quenching experiments of these polymers. Preliminary results suggest that they all exhibit amplified fluorescence quenching, and that the polymer with more features of helix conformation tends to be quenched by Rd more efficiently. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5424–5437, 2006     

Molecularly templated reaction for forming poly(dimethyl siloxane)–graphene oxide composite elastomers

This study explores the molecularly templated reaction of pyrene‐terminated telechelic poly(dimethyl siloxane) (PDMS) with graphene oxide (GO) to produce composite elastomers. These materials undergo chemical crosslinking between secondary amides near PDMS chain ends and epoxies on the surface of GO as confirmed by infrared spectroscopy, rheology, gel content, and mechanical property measurements. The incorporation of pyrene end groups introduces π–π interactions with GO surfaces that enhance the reaction efficacy of the nearby secondary amide groups. As a comparison, methoxy‐terminated telechelic PDMS containing the same secondary amides near the chain ends did not exhibit appreciable crosslinking with GO. Depending on the concentration of the amide groups, the pyrene‐terminated PDMS/GO elastomer can be highly crosslinked (e.g., up to 96 wt % gel) but highly extensible (e.g., extensional strains of more than 200%). This general strategy could be implemented using other amide containing polymers to produce a wide range of high‐performance thermosets and elastomers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1406–1413     

Synthesis and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine) onto graphene oxide

The polyzwitterionic brushes comprised of poly(2‐methacryloyloxyethyl phosphorylcholine) (pMPC) segments, which are used for surface modification of polymers and biocompatible coatings, were investigated. In this work, reverse surface‐initiated atom transfer radical polymerization (RATRP) of zwitterionic 2‐methacryloyloxyethyl phosphorylcholine (MPC) is employed to tailor the functionality of graphene oxide (GeneO) in a well‐controlled manner and produce a series of well‐defined hemocompatible hybrids (termed as GeneO‐g‐pMPC). The complexes were characterized by FT‐IR, XRD, and Raman. Results show that MPC has been coordinated on the graphene oxide sheet. Thermal stability of the nanocomposites in comparison with the neat copolymer is revealed by thermogravimetric analysis and differential thermal analysis. Scanning electron microscopy and transmission electron microscope images of the nanoconposite displays pMPC chains were capable of existing on GeneO sheet by RATRP. The biocompatibility properties were measured by plasma recalcification profile tests, hemolysis test, and MTT assays, respectively. The results confirm that the pMPC grafting can substantially enhance the hemocompatibility of the GeneO particles, and the GeneO‐g‐pMPC hybrids can be used as biomaterials without causing any hemolysis. With the versatility of RATRP and the excellent hemocompatibility of zwitterionic polymer chains, the GeneO‐g‐pMPC nanoparticles with desirable blood properties can be readily tailored to cater to various biomedical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel isoindigo‐based conjugated polyelectrolytes: Synthesis and fluorescence quenching behavior with water‐soluble poly(p‐phenylenevinylene)s

Two novel ID‐based water‐soluble conjugated polymers (+)‐PIDPV and (?)‐PIDPV were synthesized by Heck coupling reaction. These two polyelectrolytes are both consisted of isoindigo units and phenylenevinylene units. In the UV–vis absorption spectra, both (+)‐PIDPV and (?)‐PIDPV exhibit broad absorption bands that almost cover the whole visible region. Photophysical investigations reveal that the fluorescence of water‐soluble PPV can be efficiently quenched by oppositely charged PIDPV at a very low concentration. Cationic PPV shows an efficient quenching effect with Κ_SV = 1.01 × 10⁶ M^?1 in the presence of (?)‐PIDPV while the anionic PPV gives a lager quenching constant with Κ_SV = 1.71 × 10⁶ M^?1 in the presence of (+)‐PIDPV. Furthermore, the blend films of water‐soluble PPVs and oppositely charged PIDPV also exhibit excellent quenching effect. These properties suggest that (+)‐PIDPV and (?)‐PIDPV are promising materials in the application of ionic photoactive layer in the organic solar cells. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2223–2237     

Molecular weight analysis of water‐soluble poly(phenylene ethynylene)s using MALDI‐TOF MS

Molecular weights of seven poly(phenylene ethynylene)‐based water‐soluble conjugated polyelectrolytes (CPEs) obtained through Sonogashira coupling are determined by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). A standard sample preparation protocol is developed to characterize the seven CPEs using 2,5‐dihydroxybenzoic acid as the matrix (M) and AgTFA as the cationization reagent (CR). High‐quality MALDI mass spectra are obtained at volume mixing ratios (CPE/M/CR) of 5/5/1 for anionic polymers (P1–P4) and 5/50/1 for cationic polymers (P5–P7). Molecular weight, molecular weight distribution, and end‐group information are analyzed. The effects of molecular weight of CPEs on optical and quenching properties are also studied. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2537–2543     

Novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer: Design,synthesis, and properties

A novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer ( CALIX‐PPE ) has been successfully synthesized by cross‐coupling polymerization of bis‐calix[4]arene 1 with 1,4‐diethynylbenzene. The polycondensation was carried out in toluene/NEt₃ at 35 °C for 24 h, using PdCl₂(PPh₃)₂/CuI as the catalytic system, furnishing CALIX‐PPE in excellent isolated yields (higher than 95%, several runs). The yellow polymer is freely soluble in several nonprotic organic solvents. The GPC trace of the isolated polymer showed a monomodal distribution and a number‐average molecular weight of 23,300 g mol^?1 (M_w/M_n = 2.05). No evidence was found in the structural analysis (FTIR and ¹H/¹³C NMR) regarding the formation of alkyne homocoupled segments along the polymer chain. For comparative purposes, the synthesis of an analogous poly(p‐phenylene ethynylene) containing p‐t‐butyl‐phenoxymethyl side chains ( TBP‐PPE ) was also undertaken. A great similarity was found between the photophysical properties of CALIX‐PPE and TBP‐PPE in solution (UV–vis and laser induced luminescence), clearly demonstrating their unique dependence on the structure and conformation of the conjugated PPE backbone. The fluorescence spectra of polymers are of nearly identical shape, displaying their maximum emission around 420 nm. The calculated solution photoluminescence quantum yields of CALIX‐PPE and TBP‐PPE are of similar magnitude (?_{F( CALIX‐PPE )} = 0.43; ?_{F( TBP‐PPE )} = 0.51). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6477–6488, 2008     

Electrospun poly(3‐hexylthiophene)/poly(ethylene oxide)/graphene oxide composite nanofibers: effects of graphene oxide reduction

In this article, we report on the production by electrospinning of P3HT/PEO, P3HT/PEO/GO, and P3HT/PEO/rGO nanofibers in which the filler is homogeneously dispersed and parallel oriented along the fibers axis. The effect of nanofillers' presence inside nanofibers and GO reduction was studied, in order to reveal the influence of the new hierarchical structure on the electrical conductivity and mechanical properties. An in‐depth characterization of the purity and regioregularity of the starting P3HT as well as the morphology and chemical structure of GO and rGO was carried out. The morphology of the electrospun nanofibers was examined by both scanning and transmission electron microscopy. The fibrous nanocomposites are also characterized by differential scanning calorimetry to investigate their chemical structure and polymer chains arrangements. Finally, the electrical conductivity of the electrospun fibers and the elastic modulus of the single fibers are evaluated using a four‐point probe method and atomic force microscopy nanoindentation, respectively. The electrospun materials crystallinity as well as the elastic modulus increase with the addition of the nanofillers while the electrical conductivity is positively influenced by the GO reduction. Copyright © 2016 John Wiley & Sons, Ltd.     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

Water‐soluble anionic conjugated polymers for metal ion sensing: Effect of interchain aggregation

Three sulfonato‐containing fluorene‐based anionic water‐soluble conjugated polymers, which are specially designed to link fluorene with alternating moieties such as bipyridine ( P1 ), pyridine ( P2 ), and benzene ( P3 ) have been synthesized via the Pd‐catalyzed Sonogashira‐coupling reaction, respectively. These polymers had good solubility in water and showed different responses for transition metal ions with different valence in aqueous environments: the fluorescence of bipyridine‐containing P1 can be completely quenched by addition of all transition metal ions selected and showed a good selectivity for Ni²⁺; the pyridine‐containing P2 had a little response for monovalent and divalent metal ions while showed good quenching with the addition of trivalent metal ions (with a special selectivity for Fe³⁺); P3 had responses only for the trivalent metal ions within the ionic concentration we studied. After investigation of the UV‐vis absorption spectra, PL emission spectra, DLS, and fluorescence lifetime of P1 – P3 in aqueous solution when adding transition metal ions, we found that the different spectrum responses of these polymers are attributed to the different coordination ability of the units linked with fluorene in the main chain. The energy or electron‐transfer reactions were the main reason for fluorescence quenching of P1 and P2 . On the other hand, interchain aggregation caused by trivalent metal ions lead to fluorescence quenching for P3 and also caused partly fluorescence quenching of P1 and P2 . These results revealed the origin of ionochromic effects of these polymers and suggested the potential application for these polymers as novel chemosensors with higher sensing sensitivity in aqueous environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5057–5067, 2009     

Carboxylic‐functionalized water soluble π‐conjugated polymer: Highly selective and efficient chemosensor for mercury(II) ions

Here, we report a new carboxylic‐functionalized water soluble π‐conjugated polymer for selective detection of highly toxic Hg²⁺ in neutral pH condition. carboxylic‐functionalized thiophene containing oligophenylenevinylene was synthesized and polymerized under oxidative route to obtain water soluble polymer. Free carboxylic groups present in the π‐conjugated materials provide opportunity to use pH as external stimuli for studying secondary interaction such as hydrogen bonding and aromatic π‐stacking of the chromophores. The pH changes strongly influence on the molecular interactions in the monomer, whereas the long chain polymer was less disturbed. The polymer showed high selectivity for detecting Hg²⁺ ions compared with any other transition metal ions in water. The detection efficiency of the polymer was found almost 40 times higher than that of its monomeric unit. Stern‐Volmer constant for the Hg²⁺ ion sensing was determined through concentration dependent studies as 6.4 × 10⁵ M^?1. The carboxylic‐functionalized polymer showed reversibility in the metal‐ion detecting capabilities which was further investigated by NaCl complexation with Hg²⁺ complex. Both funneling of excitation energy to the Hg²⁺ center and also excitation energy migration through chain π‐conjugated backbone were correlated to the superior sensing characteristics of the polymer compared to its monomeric counterpart. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5144–5157, 2009     

Meta‐linked and para‐linked water‐soluble poly(arylene ethynylene)s with amino acid side chains: Effects of different linkage on Hg2+ ion sensing properties in aqueous media

Water‐soluble, meta‐ and para‐linked poly(arylene ethynylene)s containing L ‐aspartic acid‐functionalized fluorene units (P1 and P2) and their model compounds (M1 and M2) have been synthesized, and their photophysical properties and fluorescent sensing properties were investigated in aqueous solution. P1 and M1 with the meta‐linkage show blue‐shifted absorption and emission spectra, and decreased photoluminescence quantum yields compared with those of P2 and M2 with para‐linkage. Their absorption and fluorescence spectra are pH dependent perhaps due to the aggregation of the polymer chains at low pH values. In buffer solutions, both polymers and their model compounds exhibit the excellent selectivity and sensitivity to Hg²⁺ over other common metal ions. Furthermore, the quenching constant and detection limit of P1 are determined to be 1.04 × 10⁷ M^?1 and 10 nM, and show the higher sensitivity compared to P2. Further comparison of their model compounds reveal that the sensitivity and quenching efficiency of M1 is also higher than that of M2, indicating that the meta‐linkage pattern plays a key role in improving their Hg²⁺ ion sensing properties. In addition, both meta‐ and para‐linked polymers exhibit the higher quenching efficiency than their model compounds due to the amplified fluorescence response of conjugated polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, and structure–property investigation of conformationally rigid regioisomers of poly(p‐phenylene ethynylene)s

A series of rigid poly(p‐phenylene ethynylene)s ( PPE1 – PPE4 ) with biphenyl‐ ( M1–M3 ) and phenyl‐ ( M4 ) side groups is prepared from appropriately functionalized monomers. Herein, the solution and solid state absorption studies show the polymers have adopted twisted and rigid conformations, as supported by deep HOMO energy levels (?5.76 to ?5.81 eV). The absorption maxima of PPE1–PPE3 are shifted to shorter wavelength (λ_max = 375–381 nm) as compared to linear poly(p‐phenylene ethynylene)s (446 nm), implying a nonplanar conformation. The self‐assembly of polymers into fibers is examined using scanning electron microscopy. The fibers are not observed in PPE4 with short phenyl side group, suggesting the important role of the interplay between rigidity, position, and size of the side chains toward the formation of fibers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3652–3662     

A water‐soluble,AIE‐active polyelectrolyte for conventional and fluorescence lifetime imaging of mouse neuroblastoma neuro‐2A cells

A new conjugated polyelectrolyte containing tetraphenylethene units in the backbone is synthesized and characterized. This polyelectrolyte is water‐soluble and exhibits aggregation‐induced emission (AIE) behavior. It is biocompatible and can be directly used in conventional and fluorescence lifetime imaging of mouse neuroblastoma neuro‐2A cells, providing useful information of cellular morphology and intracellular aggregation or motion. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 672–680