Ultraviolet grafting of methacrylic acid and acrylic acid on high‐density polyethylene in different solvents and the wettability of grafted high‐density polyethylene. I. Grafting

Methacrylic acid (MAA) and acrylic acid (AA) were grafted onto high‐density polyethylene (PE) with UV initiation and a range of solvents. With acetone as the solvent, MAA was more easily grafted onto PE when the photoinitiator benzophenone was precoated on PE than when it was dissolved in the monomer solution. The grafting was faster in aliphatic solvents than in polar solvents or a UV‐adsorbing aromatic solvent (toluene). Acetone itself could initiate the photografting of both MAA and AA onto PE when it was mixed with water. The extent of grafting of MAA onto PE showed a maximum when there was about 40% acetone in the mixture. For AA, when the acetone/water concentration was 10%, the extent of grafting increased rapidly with the irradiation time. At higher acetone concentrations, the extent of grafting was low. Atomic force microscopy images showed that the surface topography of PE grafted with MAA in acetone/water was quite different from that obtained when the grafting was performed in other organic solvents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 253–262, 2004     

Modification of isotactic polypropylene film by radiation-induced graft copolymerization

In the present communication we report on the radiation induced grafting of methyl methacrylate (MMA) onto irradiated isotactic polypropylene film (IPP) by Peroxidation method to prepared grafted membrane (IPP-g-MMA). The radioactive isotope ⁶⁰Co was used as the source of gamma radiation. A plausible mechanism of grafting has been proposed. Optimum conditions pertaining to maximum percentage of grafting were evaluated as a function of different reaction parameters such as radiation dose, inhibitor concentration, monomer concentration, reaction time and reaction temperature respectively. Maximum percentage of grafting (85%) was obtained at [radiation dose] = 25 kGy, [inhibitor concentration] = 0.04 wt%, [MMA] = 6 wt%, [Reaction Temperature] = 60 °C in a [Reaction time] of 120 min. The evidence of grafted membrane was characterized by Fourier transform infrared spectroscopy, Atomic force microscopy method, Scanning electron microscopy which indicates that MMA has been grafted onto IPP. Hydrolysis of the grafted membranes in 1 N NaOH transformed ester groups of the grafted membranes to carboxylic acid and hydroxyl groups to form hydrolyzed grafted membranes. Hydrolyzed grafted membranes were investigated for their swelling behavior. Swelling properties of the hydrolyzed grafted membranes were performed in different solvents such as water, N,N-dimethylformamide (DMF) and dimethylsulfoxide (DMSO). Maximum percentage swelling value of IPP-g-MMA was observed in pure DMSO, followed by DMF and water.     

Radiation-induced grafting of acrylamide onto guar gum in aqueous medium: Synthesis and characterization of grafted polymer guar-g-acrylamide

Mutual radiation grafting technique has been applied to carry out grafting of acrylamide (AAm) onto guar gum (GG) using high-energy Co⁶⁰ γ radiation to enhance its flocculating properties for industrial effluents. The grafted product was characterized using analytical probes like elemental analysis, thermal analysis, Fourier transformed infrared (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM). The grafting extent was observed to decrease with the dose rate and increase with the concentration of AAm. Thermo gravimetric analysis (TGA) of grafted and ungrafted samples indicated better stability of grafted product. γ and microwave radiation effect on grafted and virgin GG has also been reported.     

Graft copolymers obtained by radiation grafting of methacrylic acid onto polypropylene films

Direct radiation grafting of methacrylic acid (MAA) onto polypropylene films (PP) was studied. The effect of different solvents such as benzene, distilled water, dimethyl formamide, isopropanol, isopropanol/water-mixture, on the swelling and the grafting process of MAA onto (PP) films was investigated. It was found that the grafting process was enhanced under vacuum irradiation in benzene as a diluent for MAA as compared with other solvents examined. The dependence of the grafting rate on such monomer concentrations was found to be 1.2 order. The relationship between the grafting rate and film thickness gave a negative first order dependence. This grafting system proceeded by a diffusion controlled process. Some selected properties of the grafted films such as mechanical and electrical properties, swelling behaviour, and gel determination, were also investigated.     

Tailored rheology of a metallocene polyolefin through silane grafting and subsequent silane crosslinking

Polymer modification through silane grafting and its subsequent crosslinking allows the rheological properties of a polymer to be tuned from those of a viscous melt to those of a crosslinked elastic network. In this study, a metallocene polyolefin resin is grafted with vinyl trimethoxy silane (VTMS) using dicumyl peroxide (DCP) as the initiator and is subsequently crosslinked in an oxidative environment. Dynamic rheological experiments are conducted to elucidate the effects of DCP and VTMS concentrations on the grafting and ensuing crosslinking processes. We find that the addition of VTMS alone to the polymer produces no grafting. In contrast, the presence of DCP by itself leads to direct crosslinking between polymer chains as suggested by an increase in elastic modulus and complex viscosity. Samples containing both DCP and VTMS undergo silane grafting, with the extent of grafting increasing with increasing DCP concentration. This conclusion is borne out by both rheological and Fourier transform infrared measurements. The grafted samples undergo silane crosslinking only in an oxidative environment and at temperatures equal to or greater than 190 °C. During crosslinking, the samples undergo a transition from a viscous melt with frequency‐dependent moduli to a gel exhibiting frequency‐independent moduli with the elastic modulus exceeding the viscous modulus. However, the kinetics of crosslinking and the extent of the modulus increase are a function of the DCP concentration, with both exhibiting a maximum at a specific DCP and VTMS combination. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2468–2479, 2000     

Stimuli-responsive membranes through peroxidation radiation-induced grafting of 2-hydroxyethyl methacrylate (2-HEMA) onto isotactic polypropylene film (IPP)

Stimuli-responsive membranes were prepared by peroxidation radiation-induced grafting of 2-hydroxyethyl methacrylate (2-HEMA) onto IPP. The radioactive isotope ⁶⁰Co was used as the source of gamma radiation. A plausible mechanism of grafting has been proposed. Using this method, the degree of grafting and morphology could be controlled through the variation of reaction parameters such as total dose, inhibitor concentration, monomer concentration, reaction time, reaction temperature and solvents. Maximum percentage of grafting (210?%) was obtained at total radiation dose of 20?kGy. The graft copolymerization reaction was carried out for 3?h with 20?v/v% of the monomer (2-HEMA) in methanol at 85?°C using 0.06?wt% of FeCl₃ as inhibitor. The chemical structures of grafted membranes were characterized by Fourier transform infrared spectroscopy (FTIR) which indicates that HEMA has been grafted onto IPP. The atomic force microscopy (AFM), scanning electron microscopy (SEM) techniques were used to assess the morphological characterization of the membranes, revealing the roughness of the surface. These membranes were investigated for their swelling behavior. pH-sensitivity and the dyeability of the grafted and ungrafted membranes have also been studied.     

Effect of surface‐grafted ionic groups on the performance of cellulose‐fiber‐reinforced thermoplastic composites

The influence of the surface chemistry of the cellulose fiber and polymer matrix on the mechanical and thermal dynamic mechanical properties of cellulose‐fiber‐reinforced polymer composites was investigated. The cellulose fiber was treated either with a coupling agent or with a coupling‐agent treatment followed by the introduction of quaternary ammonium groups onto the fiber surface, whereas the polymer matrix, with opposite polar groups such as polystyrene incorporated with sulfonated polystyrene and poly(ethylene‐co‐methacrylic acid), was compounded with the fiber. The grafting of the fiber surface was investigated with Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. Experimental results showed that an obvious improvement in the mechanical strength could be achieved for composites with an ionic interface between the fiber and the polymer matrix because of the adhesion enhancement of the fiber and the matrix. The improved adhesion could be ascribed to the grafted ionic groups at the cellulose‐fiber surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2022–2032, 2003     

Grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticle and carbon black surfaces

The surface grafting of hyperbranched cyclotriphosphazene polymer onto silica nanoparticles and carbon black was investigated. The grafting of hyperbranched cyclotriphosphazene polymer onto these surfaces was achieved by the repeated reactions of hexachlorocyclotriphosphazene with hexamethylenediamine from surface amino groups and sodium carboxylate groups, respectively. The percentage of grafting onto silica and carbon black surfaces exceeded 760 and 390%, respectively. However, it proved difficult to achieve the theoretical growth of cyclotriphosphazene polymer from these surfaces because of steric hindrance. The introduction of sulfonic acid groups was successfully achieved by the reaction of terminal chlorophosphazene groups of the hyperbranched polymer‐grafted silica and carbon black with sulfanilic acid. The content of sulfonic acid groups introduced onto silica and carbon black surfaces was 4.98 mmol/g and 5.70 mmol/g, respectively. The sulfonated cyclotriphosphazene polymer‐grafted carbon black was extremely hydrophilic, yielding stable colloidal dispersions in polar solvents. The sulfonated cyclotriphosphazene polymer‐grafted silica and carbon black showed ionic conductivity, with the conductance increasing exponentially with increasing relative humidity and temperature. This study may offer important leads in the application of silica nanoparticles and carbon black in polymeric membranes for fuel cells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4218–4226, 2008     

聚烯烃的化学接枝改性

综述了化学接枝改性聚烯烃的三种方法,即溶液法,熔融法及固定相法,并讨论了接枝单体的选择,接枝机理和接枝物的性能表征。     

Synthesis of a new polymer surface bearing grafted azo polymer chains

Azobenzene, a photosensitive chromophore that undergoes photoinduced and thermal cis–trans isomerization, can be applied in a nonlinear optical field. {4′‐[(Hydroxy)ethyl]amino}‐4‐nitroazobenzene (disperse red 1) corresponds to one of these azo compounds, which can be grafted to a polymer chain as a part of the main chain, as a dangling group, or onto the polymer surface. In the last case, disperse red 1 is transformed into an acrylic monomer and then grafted onto a polypropylene surface modified with a cold carbon dioxide‐plasma treatment. A method is proposed for quantifying the radicals formed during the plasma treatment and, consequently, for optimizing the grafting reaction. The best conditions (the nature of the solvent, temperature, monomer concentration, and duration) are given. Both IR and Raman spectroscopies were used as efficient techniques for grafting characterization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3052–3061, 2001     

Synthesis of quaternary ammonium ion‐grafted polyolefins via activation of inert C?H bonds and nitroxide mediated radical polymerization

A TEMPO‐functionalized isotactic poly(1‐butene) macroinitiator was synthesized via rhodium‐catalyzed activation of the alkane C? H bonds in polyolefin side chain using a boron reagent and subsequent transformations of the boronate ester group in the polymer. These functionalization processes did not induce cross‐linking or degradation of the polymer chains. Nitroxide mediated radical polymerization of dipropyl(4‐vinylphenyl)amine with the macroinitiator produced high‐molecular weight amine‐grafted copolymers of the polyolefin. Adjusting the ratio of polar monomer concentration to macroinitiator concentration controlled the concentrations of amine blocks in the graft copolymers up to 10 mol %. Quaternization of the amine‐grafted copolymers with methyl triflate generated ammonium ion blocks along the side chain of the graft copolymers. A systematic decrease of contact angle in a series of ammonium ion‐grafted copolymers was observed through water contact angle measurements, suggesting that the graft polymerization and the quaternization led to increased hydrophilicity in the polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4519–4531, 2009     

Study on chemical, UV and gamma radiation-induced grafting of 2-hydroxyethyl methacrylate onto chitosan

In the present study, 2-hydroxyethyl methacrylate has been grafted onto chitosan by using either chemical initiation, or photo-induction or gamma radiation-induced polymerisation, all under heterogeneous conditions. The evidence of grafting was provided by Fourier transform infrared spectroscopy and thermal analysis.

The results concerning the effect of initiator concentration, initial monomer concentration and dose rate influencing on the yield of grafting reactions are presented. These suggest that gamma irradiation is the method that leads to higher yields of grafting.     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Grafting polyelectrolytes onto polyacrylamide for flocculation 1. Polymer synthesis and characterization

Low-molecular-weight high-charge-density cationic diallyldimethylammonium chloride homopolymer (polyDADMAC) was grafted onto high-molecular-weight nonionic polyacrylamide (PAM) via a free radical mechanism using a gamma radiation technique. The graft copolymer systems were characterized in terms of viscosity, composition, gel content, degree of grafting and grafting efficiency. Degree of grafting was a strong function of radiation dose, dose rate and polyelectrolyte concentration. Gels were formed at high radiation doses and high PAM levels. Crosslinking between the electrolyte polymers was limited due to electrostatic repulsion. Gelation was mainly caused by coupling of PAM chains. High grafting efficiency was achieved: the lower the poly(DADMAC) concentration, the higher the grafting efficiency observed. The grafting mechanism and the effect of ion interactions on copolymer structural properties are also elucidated and discussed. Received: 6 April 1998 Accepted in revised form: 28 August 1998     

Preparation of rechargeable biocidal polypropylene by reactive extrusion with diallylamino triazine

Biocidal polypropylene (PP) was prepared by using a reactive extrusion process, in which PP was grafted with an N-halamine precursor, 2, 4-diamino-6-diallylamino-1, 3, 5-triazine (NDAM). After chlorination the grated PP was converted to biocidal halamine structures. Effects of monomer and initiator concentration on grafting yield, thermal properties, and biocidal efficacy were studied. The Fourier transformed spectroscopy (FTIR) results and nitrogen analysis confirmed the graft polymerization on PP backbone during the reactive extrusion. The results also indicated that at low monomer concentration, increase in initiator concentration led to increase in PP chain scission and decrease in mixing torque, or polymer chain length. As the monomer concentration increases, grafted monomer content in the products showed a steady increase, indicating more grafting copolymerization in the system. The halogenated products exhibited potent antimicrobial properties against Escherichia coli, and the antimicrobial properties were durable and regenerable.     

γ-Ray-induced grafting of DMAEMA and AAc onto PP by two step method

Binary graft copolymerization of thermosensitive 2-(dimethylamino) ethyl methacrylate (DMAEMA) and pH sensitive acrylic acid (AAc) monomers onto polypropylene (PP) films was carried out by a two step method using a ⁶⁰Co gamma radiation source. The PP film was initially modified by grafting of DMAEMA through a direct method. The DMAEMA-g-PP film obtained was then subjected to radiation grafting of AAc by the pre-irradiation method to give (DMAEMA-g-PP)-g-AAc. The optimal conditions, such as reaction time, reaction temperature, monomer concentration, and dose were studied. The grafted samples were verified by the FTIR-ATR spectroscopy and swelling; thermal properties were analyzed by DSC and TGA.     

Grafting of functional nitroxyl free radicals to polyolefins as a tool to postreactor modification of polyethylene‐based materials with control of macromolecular architecture

Nitroxyl radicals were used as functionalizing agents during the free radical postreactor modification process of polyolefins carried out in the melt. The 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (HO‐TEMPO) and the 4‐benzoyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (BzO‐TEMPO) free radicals were successfully grafted onto a polyethylene‐based material (ethylene‐co‐1‐octene copolymer) by coupling reaction with polymer macroradicals; these last were formed by H‐abstraction through peroxide addition. The macromolecular structure of the functionalized polyolefins was assessed by ¹H‐NMR, FTIR spectroscopy, and SEC measurements which were used to evidence the grafting site, to evaluate the grafting level and to highlight the occurrence of chain extension through crosslinking side reactions. Indeed the use of proper model compounds allowed the preparation of accurate FTIR calibration curves for the quantitative determination of the functionalization degree. Besides the high temperature SEC analysis highlighted that this fast and simple coupling reaction between macroradicals and nitroxyl free radicals grants the grafting of functionalities onto the polyolefin backbone by contemporarily preventing the side reactions liable of the structure and MW modification of the pristine polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Immobilization of bacteria in microgel grafted onto macroporous polyethylene

The development of “Green Chemistry” requires new materials to replace the conventional organic chemistry by biological catalysts, to produce fine chemicals in an environmentally friendly manner. Microbial whole cells can be directly used as biocatalysts, providing a simple and cheap methodology since enzyme isolation and purification are avoided.High-density polyethylene (HDPE) is a very stable polymer though it can be activated by gamma radiation to induce grafting. Glycidyl methacrylate was grafted onto macroporous HDPE and PP in the range of 1–6%, proportional to the initial monomer concentration. Grafted polymers were further chemically modified with ethylenediamine to generate a cationic hydrogel of micron-size thickness onto the internal polymer surfaces. Modified polymers were able to immobilize Gram-positive and Gram-negative bacteria that can catalyze a chemical reaction as efficient as free cells do.     

Synthesis and Characterization of Chitosan‐graft‐Poly(3‐(trimethoxysilyl)propyl methacrylate) Initiated by Ceric (IV) Ion

The grafting of 3‐(trimethoxysilyl)propyl methacrylate (TMSPM) onto chitosan by ceric ion initiation was studied under homogeneous conditions in 2% acetic acid solution. The grafted polymer was characterized by FT‐IR, ¹H‐NMR, TGA and XRD and swelling studies. TGA results showed that the incorporation of TMSPM to the chitosan chains decreased the thermal stability of the grafted chitosan. Due to the grafting of TMSPM, the crystallinity of chitosan derivatives was found to be destroyed. The solubility of the grafted chitosan in water was improved. The effects of reaction conditions such as initiator concentration, monomer concentration, reaction temperature and reaction time were studied by determining the grafting parameters such as grafting and grafting efficiency. Under optimum conditions, the grafting parameters were achieved as 1440 and 97%, respectively.     

Preparation of micro- and nanopatterns of polymer chains grafted onto flexible polymer substrates

In this work a simple novel method for preparing micro- and nanoscale patterns of polymer chains grafted onto flexible polymer substrates is described. A combination of the two techniques of radiation grafting and "grafting-from" has been made. This combination makes it possible to prepare grafted structures having micro- or nanoscale lateral dimensions that are determined by the electron beam or X-ray irradiation patterns used. The height of the grafted features can be controlled by the irradiation dose or such grafting reaction conditions as time, temperature, or monomer concentration. Our first results for nanopatterned samples demonstrate resolution comparable to those of other polymer-based lithography processes.