The addition of functionalized graphene oxide to polyetherimide to improve its thermal conductivity and mechanical properties

The thermal and electrical conductivity and mechanical properties of polyetherimide (PEI) containing either alkyl‐aminated (enGO) or phenyl‐aminated graphene (pnGO) oxides were studied. A solution casting method was used to prepare functionalized graphene oxide/PEI composites with different filler contents. The introduction of functionalized graphene oxide to the PEI matrix improved the thermal conductivity, electrical conductivity, and mechanical properties. The thermal conductivities of the enGO 3 wt%/PEI and pnGO 3 wt%/PEI composites were 0.324 W/mK and 0.329 W/mK, respectively, due to the high thermal conductivity of the graphene‐based materials and the strong interface adhesion due to the filler surface treatment between the fillers and the matrix. The electrical conductivities of the functionalized graphene oxide/PEI composites were larger than that of PEI, but the electrical conductivity values were generally low, which is consistent with the magnitude of the insulator. The strong interfacial adhesion between the fillers and the matrix led to improved mechanical properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Improvement of thermoplastic polyurethane's flame retardancy and thermal conductivity by leaf‐shaped cobalt‐zeolitic imidazolate framework–modified graphene and intumescent flame retardant

In this work, a new type of leaf‐shaped cobalt‐zeolitic imidazolate framework–modified graphene (Co‐ZIF‐L@RGO) hybrid was successfully prepared and blended with an intumescent flame retardant (IFR). It was added into thermoplastic polyurethane (TPU) to study the effect of its combination with IFR on the thermal conductivity and flame retardant performance of TPU. The morphology and structure of the Co‐ZIF‐L@RGO hybrid were characterized by scanning electron microscope (SEM), Fourier transform infrared and X‐ray diffraction (XRD). The results showed that Co‐ZIF‐L were uniformly loaded on the surface of graphene. Furthermore, compared with pure TPU, the limiting oxygen index values of the composite material with 3 wt% Co‐ZIF‐L and 27 wt% IFR increased to 32.6%. Their UL‐94 rating reached V‐0 rating. Their peak heat release rate, total heat release, peak smoke production rate and total smoke production were also greatly reduced by 84.4%, 70.1%, 60.3% and 62.5%, respectively. The thermogravimetric‐infrared test results showed that the amount of toxic gas emissions was effectively suppressed. The residual carbon was analyzed by SEM, laser Raman spectroscopy and XRD, and flame retardant mechanism was further investigated. Besides, the addition of this hybrid improved the thermal conductivity of TPU.     

Effects of the hydroxyl value of polyol in rigid polyurethane foams

Rigid polyurethane foams (RPUFs) have been fabricated from crude MDI (CMDI) and polypropylene glycols (PPGs) of various hydroxyl values (OHVs) of 300–600 with an environmentally friendly blowing agent (HFC 365mfc). The closed cell content, compression strength, and dimensional stability of the foam increased with increase in the OHV due to the increased crosslink density, which was evidenced from the increased glass transition temperature (T_g). The cream time, gel time, tack‐free time, and density of the foam showed a minimum at 500OHV. The decrease and increase around the minimum were, respectively, interpreted in terms of increased mixture mobility and extensive allophanate crosslinks, which retard gelling as well as foaming reactions. The thermal conductivity also showed a small minimum at 500OHV. Copyright © 2008 John Wiley & Sons, Ltd.     

Polyurethane‐nanocomposite materials via in situ polymerization into organoclay interlayers

New nanocomposite materials based on polyurethane intercalated into organoclay layers have been synthesized via in situ polymerization. The syntheses of polyurethane–organoclay hybrid films were carried out by swelling the organoclay [12‐aminododecanoic acid montmorillonite] into different kinds of diols followed by addition of diisocyanate then casting in a film. The homogeneous dispersion of MMT in the polymer matrix is evidenced by scanning electron microscope and x‐ray diffraction, which showed the disappearance of the peak characteristic to d₀₀₁ spacing. It was found that the presence of organoclay has improved the thermal, solvent resistance and mechanical properties. Also, the tensile strength is increased with increasing the organoclay contents to 20% by the ratio 182% related to the PU with 0% organoclay. On the contrary, the elongation has decreased with increasing the organoclay contents. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of graphene doping of holographic polymer‐dispersed liquid crystals

Doping a polymer matrix with a minute amount of graphene (0.05–0.25%) had significant effects on the grating formation kinetics and electro‐optical performance of a holographic polymer‐dispersed liquid crystal. Low graphene contents (≤0.1%) reduced the viscosity and induced rapid diffusion, curing, grating formation, and high diffraction efficiency with a diffraction overshoot of 0.05%. Conversely, high graphene contents increased the compound viscosity, and the entire process proceeded slowly. Graphene increased the polymer conductivity and local electric field, reduced the operating voltage from 65 to 25–50 V, and increased the contrast ratio from 7 to 8–23 with a concomitant decrease in rise time. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Structures and physical properties of rigid polyurethane foams with water as the sole blowing agent

Polyurethane rigid foams have been used for many applications such as pipelines insulation materials, automotive parts, solar water heater and construction materials[1,2], due to their desirable physical properties. Traditional rigid foam is made by the reaction of a polyol and 4,4′-diphenylmethane diisocyanate (MDI) with chlorofluorocarbons (CFCs), in particular tri- chlorofluoromethane (CFC-11) and/or HCFC-141b as blowing agents. However, the CFCs blowing agents contain halogens, whic…     

In‐Situ “molecular welding” preparation of graphene/polyimide hybrid film with superior thermal conductivity and flexibility

With the rapid development of electronic industry, thermal management has become a critical issue that severely restricts the application of portable devices. In this work, we fabricate a flexible and free‐standing graphitized‐graphene/polyimide (I‐g‐GO/PI) film via an in‐situ “molecular welding” strategy. With the help of in‐situ polymerization, PI can be well‐dispersed with GO and serves as a solder to enlarge the grain size of GO, resulting in an enhanced thermal conductivity of the film. The 7 wt % addition of PI into GO (I‐g‐GO/PI‐7%) leads to an in‐plane thermal conductivity as high as 1269.700 ± 1.498 W/m/K, which is 81.8% higher than that of the pristine graphene and also superior to that fabricated via solution blending method by 58.3%. Simultaneously, the hybrid film exhibits an excellent flexibility and survives from a 2000 cycles bending test. The large‐area hybrid film prepared by such an in‐situ “molecular welding” method provides a promising way to fabricate graphene‐based film for highly efficient thermal management. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1215–1223     

石墨烯修饰的复合热界面材料的热性能研究

采用还原氧化石墨烯(RGO)和三维网状石墨烯(3DGN)修饰环氧树脂,制备高性能的复合热界面材料(TIM)。其中,3DGN为声子提供了快速输运网络,而RGO则显著增强石墨烯导热填料与环氧树脂基材界面处声子的传输能力。RGO表面官能团的类型对样品的热性能有显著影响,羧基是促进界面区域声子传输的最佳选择。优化RGO(20 wt%)和3DGN(10 wt%)的质量分数后,样品的导热系数达到6.5Wm-1K-1,是本征环氧树脂的32倍。此外,复合TIM的拉伸极限也达到280%。     

氮掺杂石墨烯负载的硫化镉空心球纳米复合材料的光催化性能

通过无模板法一步合成了一种新型N掺杂石墨烯负载的CdS空心球复合材料. 采用X射线衍射、透射电镜、红外光谱、紫外-可见光谱、N₂吸附-脱附、荧光光谱和X射线光电子能谱等技术对该材料进行了表征, 并在可见光照射下测试了其在降解亚甲基蓝和水杨酸中的光催化性能. 结果表明, 相对于氧化石墨烯负载硫化镉空心球和单独的硫化镉空心球, 氮掺杂石墨烯负载的硫化镉空心球具有更高的光催化活性和稳定性. 这是由于氮掺杂的石墨烯能充当优异的电子受体和传输体, 从而抑制了载流子的复合. 另外发现, 羟基自由基是可见光下降解亚甲基蓝的主要活性物种.     

Preparation and properties of poly(dimethysilyleneethynylenephenylene‐ethynylene)/graphene Composites

Polymer composites with carbon‐based nano‐fillers have generated significant interest in industry and science because of their multifunctional and valuable properties. An APA‐functionalized GO nanofiller (GO–APA) was prepared through the reaction between graphene oxide (GO) and 3‐aminophenyl acetylene (APA) in dimethylformide (DMF) with ammonia hydroxide. Furthermore the PDSEPE/GO–APA composites were made from Poly(dimethysilyleneethynylenephenylene ethynylene) (PDSEPE) and GO–APA. FT‐IR, XRD, XPS, SEM, DSC and TGA techniques were used to characterize the chemical compositions and physical and chemical properties of GO–APA and PDSEPE/GO–APA composites. As a result, the prepared PDSEPE/GO–APA composites show high thermal stabilities, excellent electrical conductivity and good flexural strength. When the weight percentage of GO–APA reaches 0.5%, the PDSEPE/GO–APA composite electrical conductivity increases by 6 orders of magnitude and the flexural strength improves by nearly 33% compared with that of cured PDSEPE resin. Copyright © 2015 John Wiley & Sons, Ltd.     

Thermal conductivity of open‐cell polyolefin foams

The thermal conductivity and the cellular structure of novel open‐cell polyolefin foams produced by compression molding and based on blends of an ethylene‐vinyl acetate copolymer (EVA) and a low‐density polyethylene (LDPE) have been studied in the temperature range between 24 and 50 °C. The experimental results have shown that the cellular structure of the analyzed materials has interconnected cells because of the presence of large and small holes in the cell walls, this structure being clearly different to the typical structure of open‐cell polyurethane foams. It has been found that at low temperatures the materials have a slightly higher thermal conductivity than closed‐cell polyolefin foams of similar densities. The different mechanisms of heat flow, conduction, convection, and radiation have been analyzed by using experimental measurements and a theoretical model. It has been proved that, in spite of having an open‐cell structure, the convention mechanism is negligible, being the radiation mechanism the one which made different the conductivity of materials with varying cellular structures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 212–221, 2008     

Evaluation of the catocene/graphene oxide nanocomposite catalytic activity on ammonium perchlorate thermal decomposition

A novel nanocomposite catalyst for thermal degradation of the ammonium perchlorate (AP) has been synthesized, and its effect on the thermal behavior of AP has been investigated. Preparation of the catalyst was carried out via functionalization of the graphene oxide with phenyl isocyanate and its noncovalent bonding to catocene. The catalytic activity of the catalyst was studied by thermal gravimetric analysis/differential scanning calorimetry at various heating rates. In addition, the effect of the catalyst on the AP thermal decomposition has been investigated by Kissinger and Friedman methods as two model-free methods for calculation of the activation energy parameter. According to the Kissinger method calculations, the E_a of AP decomposition reduced about 151 kJ⋅mol⁻¹ lower than the reported value for pure AP in the presence of the catalyst. Calculation of the E_a value for various reaction conversion rates by the Friedman method also confirmed the Kissinger method results.     

Synthesis and thermal properties of antimony doped tin oxide/waterborne polyurethane nanocomposite films as heat insulating materials

The waterborne polyurethane (WPU) was synthesized from the polycondensation between isophorone diisocyanate (IPDI) and polyoxypropylene glycol (N‐210) and then dispersed into water. Subsequently, the WPU emulsion was modified with antimony doped tin oxide (ATO) nanoparticle by ultrasonic dispersion. The ATO/WPU emulsion was cast onto Teflon molds. After being dried, ATO/WPU films were prepared. TEM indicated that the ATO nanoparticles were homogeneously dispersed in the polymer matrix at the nanometer scale. DSC showed that the ATO/WPU nanocomposites displayed increased glass transition temperatures compared to the control WPU. The mechanical properties of the films were characterized by dynamic‐mechanical analysis (DMA). The higher glass transition temperature and storage modulus indicates the superior mechanical properties of WPU modified by ATO nanoparticles over the conventional unmodified WPU. The thermal behaviors of the films were evaluated by thermogravimetric analysis (TGA). It could be found that the incorporation of ATO into WPU can improve the thermal stability dramatically. The results from UV–visible–near infrared spectra indicated that the ATO/WPU films could decrease the infrared transmission effectively. The heat‐insulation measurements showed that glass coated with ATO/WPU films possessed better heat‐insulating effect than empty glass. Copyright © 2010 John Wiley & Sons, Ltd.     

Sound absorption behavior of flexible polyurethane foams including high molecular‐weight copolymer polyol

Noise pollution is an important issue for automotive industries. In this article, the high molecular‐weight copolymer polyol is blended in the polyol mixtures for fabricating flexible polyurethane foams to improve sound absorption efficiency. Changes of cavity size and material density of the foams are negligible by inclusion of copolymer polyol in the polyol mixture, but the closed pore ratio and specific airflow resistance increase for the copolymer polyol content higher than 20 wt% because of changes of phase separation behavior from drainage flow rate reduction that occurs with increased viscosity. Sound absorption efficiency increases with increasing copolymer polyol content up to 20 wt%, but it decreases beyond this point. The sound absorption property mainly results from the closed pore ratio, not from the cavity size. The compression strength increases with increasing copolymer polyol contents by increased amount of hard segments. Therefore, an optimum amount of high molecular‐weight polyol is recommended for enhanced sound absorption property.     

Physical properties of silicone foams filled with carbon nanotubes and functionalized graphene sheets

Free-rising silicone foams were made with loading fractions of up to 0.25 wt.-% functionalized graphene sheets (FGS) and up to 1.0 wt.-% carbon nanotubes (CNTs) using hydrogen as blowing agent. Scanning electron microscopy of the samples revealed an open cellular structure and a homogeneous dispersion of both types of nanofillers. The incorporation of nanofiller affected the foaming process and thus the final foam density and cellular structure. Transmission electron microscopy revealed the formation of a CNT network throughout the sample, while FGS presented an exfoliated and intercalated dispersion. The thermal stability of the samples was drastically affected by the presence of both nanofillers. Both nanofillers showed a positive effect on the compressive response of the foams. However, the nanocomposite foams were found to decrease the acoustic absorption with nanofiller content probably due to the variable foam structure and improved stiffness.     

Synthesis and electro‐optic properties of novel X‐type polyurethane containing nitrophenylazonitroresorcinoxy group with highly enhanced thermal stability of dipole alignment

Novel X‐type polyurethane 4 containing 4‐(4‐nitrophenylazo)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which are parts of the polymer main chains, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stabilities up to 270 °C from thermogravimetric analysis with glass transition temperature obtained from differential scanning calorimetry of about 134 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064 nm fundamental wavelength is 5.37 × 10^?9 esu. Polymer 4 exhibits a thermal stability up to T_g, and no significant SHG decay is observed below 135 °C, which is acceptable for NLO device applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 760–766     

LDPE/EVA/graphene nanocomposites with enhanced mechanical and gas permeability properties

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low‐density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1‐nm thickness and good transparency was synthesized using the well‐known Hummers's method. Fourier transform infrared and X‐ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are improved 65% and 92% by adding 7 wt% of GO and RGO, respectively. The tensile measurements showed that maximum tensile strength emerged in 3 wt% of loading for RGO and 5 wt% for GO. The measured oxygen and carbon dioxide permeability represented noticeably the attenuation of gas permeability in composite films compared with pristine LDPE/EVA blend. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of modified graphene and microwave irradiation on the mechanical and thermal properties of poly(styrene‐co‐methyl methacrylate)/graphene nanocomposites

The effect of modified graphene (MG) and microwave irradiation on the interaction between graphene (G) and poly(styrene‐co‐methyl meth acrylate) [P(S‐co‐MMA)] polymer matrix has been studied in this article. Modification of graphene was performed using nitric acid. P(S‐co‐MMA) polymer was blended via melt blending with pristine and MG. The resultant nanocomposites were irradiated under microwave at three different time intervals (5, 10, and 20 min). Compared to pristine graphene, MG showed improved interaction with P(S‐co‐MMA) polymer (P) after melt mixing and microwave irradiation. The mechanism of improved dispersion and interaction of modified graphene with P(S‐co‐MMA) polymer matrix during melt mixing and microwave irradiation is due to the presence of oxygen functionalities on the surface of MG as confirmed from Fourier transform infrared spectroscopy. The formation of defects on modified graphene and free radicals on P(S‐co‐MMA) polymer chains after irradiation as explained by Raman spectroscopy and X‐Ray diffraction studies. The nanocomposites with 0.1 wt% G and MG have shown a 26% and 38% increase in storage modulus. After irradiation (10 min), the storage modulus further improved to 11.9% and 27.6% of nanocomposites. The glass transition temperature of nanocomposites also improved considerably after melt mixing and microwave irradiation (but only for polymer MG nanocomposite). However, at higher irradiation time (20 min), degradation of polymer nanocomposites occurred. State of creation of crosslink network after 10 min of irradiation and degradation after 20 min of irradiation of nanocomposites was confirmed from SEM studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique

In this study a dehydration hydrothermal technique has been used to introduce a simple, environmentally friendly and facile method for manufacturing highly dispersed reduced graphene oxide for improving the thermo-physical and rheological properties of heat transfer liquids. The hydrothermal reduction of graphene oxide was verified by various characterizations methods such as UV–visible absorption spectroscopy, Zeta potential, Raman spectroscopy, X-ray photoemission spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy. A thorough investigation was conducted on the thermo-physical properties of reduced graphene oxide at concentrations of 0.02, 0.04, 0.06, and 0.08?wt% under different temperatures. Significant improvements in electrical and thermal conductivity were obtained by adding a small amount of hydrothermal-assisted reduced graphene oxide (h-rGO) in the suspension. The viscosity and density remained relatively unchanged with the increase of concentrations where the pH was maintained within the desirable value, despite the fact that no additive was used during the reduction process. It is noteworthy to highlight that the h-rGO aqueous suspensions have shown Newtonian behavior. Results indicated that the h-rGO could be employed as a promising additive for conventional heat transfer liquids for different thermal applications.     

CuO nanoparticles supported on three‐dimensional nitrogen‐doped graphene as a promising catalyst for thermal decomposition of ammonium perchlorate

In the present work, CuO nanoparticles grown on three‐dimensional nitrogen‐doped graphene‐based frameworks (CuO@3D‐(N)GFs) were synthesized using a two‐step method. After the synthesis of three‐dimensional nitrogen‐doped graphene, CuO nanoparticles were deposited on it, by adding cupric acetate followed by thermal treatment. Different analysis methods were used to characterize the products. The as‐prepared nanocomposite was used as a promising catalyst for thermal decomposition of ammonium perchlorate (AP) as one of the most common oxidizer in composite propellants. Differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA) techniques were used to investigate the thermal decomposition of ammonium perchlorate. According to the DSC/TGA, high temperature decomposition of AP decreased to 111 °C in the presence of 4% CuO@3D‐(N)GFs and the total heat release (ΔH) from decomposition of AP increased to 1893 J g^?1 which is much more than 590 J g^?1 for pure AP.