Determination of parathion in biological fluids by means of direct solid-phase microextraction

A new and simple procedure for the determination of parathion in human whole blood and urine using direct immersion (DI) solid-phase microextraction (SPME) and gas chromatography/mass spectrometry (GC/MS) is presented. This technique was developed using only 100 μL of sample, and ethion was used as internal standard (IS). A 65-μm Carbowax/divinylbenzene (CW/DVB) SPME fibre was selected for sampling, and the main parameters affecting the SPME process such as extraction temperature, adsorption and desorption time, salt addition, agitation and pH effect were optimized to enhance the sensitivity of the method. This optimization was also performed to allow the qualitative determination of parathion’s main metabolite, paraoxon, in blood. The limits of detection and quantitation for parathion were 3 and 10 ng/mL for urine and 25 and 50 ng/mL for blood, respectively. For paraoxon, the limit of detection was 50 ng/mL in blood. The method showed linearity between the LOQ and 50 μg/mL for both matrices, with correlation coefficients ranging from 0.9954 to 0.9999. Precision and accuracy were in conformity with the criteria normally accepted in bioanalytical method validation. The mean absolute recoveries were 35.1% for urine and 6.7% for blood. Other parameters such as dilution of sample and stability were also validated. Its simplicity and the fact that only 100 μL of sample is required to accomplish the analysis make this method useful in forensic toxicology laboratories to determine this compound in intoxications, and it can be considered an alternative to other methods normally used for the determination of this compound in biological media.     

Supercritical fluid extraction combined with solid phase extraction as sample preparation technique for the analysis of β-blockers in serum and urine

A method is developed for the determination of β-blockers in serum and urine at levels of 0.5 μg/mL. The technique uses a combination of solid phase extraction (SPE) with in situ derivatization and supercritical fluid extraction (SFE) with subsequent gas chromatography mass spectrometry. The optimization of the SFE step shows that a static extraction period can be eliminated. The method gives good linearity (r = 0.991–0.999) and repeatability in the concentration range of 0.5 to 5 μg/mL. Relative standard deviations for oxprenolol, propanolol and metoprolol were less than 5% in serum and 5–11% in urine. Received: 23 May 1997 / Revised: 28 July 1997 / Accepted: 5 August 1997     

Pipette tip solid-phase extraction and gas chromatography – mass spectrometry for the determination of methamphetamine and amphetamine in human whole blood

Methamphetamine and amphetamine were extracted from human whole blood samples using pipette tip solid-phase extraction (SPE) with MonoTip C₁₈ tips, on which C₁₈-bonded monolithic silica gel was fixed. Human whole blood (0.1 mL) containing methamphetamine and amphetamine, with N-methylbenzylamine as an internal standard, was mixed with 0.4 mL of distilled water and 50 μL of 5 M sodium hydroxide solution. After centrifugation, the supernatant was extracted to the C₁₈ phase of the tip (pipette tip volume, 200 μL) by 25 repeated aspirating/dispensing cycles using a manual micropipettor. Analytes retained in the C₁₈ phase were eluted with methanol by five repeated aspirating/dispensing cycles. After derivatization with trifluoroacetic anhydride, analytes were measured by gas chromatography – mass spectrometry with selected ion monitoring in the positive-ion electron impact mode. Recoveries of methamphetamine and amphetamine spiked into whole blood were more than 87.6 and 81.7%, respectively. Regression equations for methamphetamine and amphetamine showed excellent linearity in the range of 0.5–100 ng/0.1 mL. The limits of detection for methamphetamine and amphetamine were 0.15 and 0.11 ng/0.1 mL, respectively. Intra- and interday coefficients of variation for both stimulants were not greater than 9.6 and 13.8%, respectively. The determination of methamphetamine and amphetamine in autopsy whole blood samples is presented, and was shown to validate the present methodology.     

Determination of endosulfan and some pyrethroids in waters by micro liquid-liquid extraction and GC-MS

A simple, rapid and reproducible method for the determination of some pesticide residues in water was developed using micro liquid-liquid extraction and gas chromatography - mass spectrometry with selected ion monitoring (GC/MS-SIM). The chlorinated insecticides α- and β-endosulfan and endosulfan-sulfate as well as the synthetic pyrethroids bifenthrin, permethrin, cypermethrin, fenvalerate and deltamethrin can be separated from a 500 mL sample water extracted with 0.5 mL of n-hexane containing anthracene-d₁₀ as internal standard without clean-up in only 13 min. The recovery efficiencies of the tested compounds yielded more than 93.0% at a fortification level of 5 ng mL^–1 and their relative standard deviations were between 1.9 and 11.7%. Detection limit of each compound ranged between 3 and 35 pg mL^–1. The method was applied to ground, sea and tap waters from Almería (Spain). The solubilities in water at 20° C were determined. Received: 21 March 1997 / Revised: 28 July 1997 / Accepted: 18 August 1997     

Determination of the enantiomeric purity of amphetamine after derivatization with Sanger’s reagent (2,4-dinitrofluorobenzene [DNFB]) by simultaneous dual circular dichroism and ultraviolet spectroscopy

Determination of Se in biological materials was attempted by microwave-induced plasma mass spectrometry (MIP-MS). (1) Serum samples were available after 10 times dilution with 0.5% nitric acid solution containing 0.1% Triton X-100. When oxygen gas was inserted into the plasma gas (nitrogen) in order to improve the combustion, the sensitivity was reduced to 45%. The detection limit of this method was 0.5 ng/mL. (2) Standard reference materials on commercial base were used to evaluate the accuracy of the Se determination by MIP-MS after microwave digestion. In samples like bovine liver and human hair with Se concentrations of more than 0.7 μg/g, the standard curve method after internal standard (IS) correction was acceptable. This procedure was unsuitable for samples with low Se concentrations such as milk powder (certified value of Se 0.11 μg/g), or plant leaf samples. (3) Instead of IS correction, the peak height of the spectrum was used for calculations from the matrix matched calibration curve. The results of all materials were close to the certified values, even at 25 ng/g. The detection limit of the MIP-MS with microwave digestion and IS correction was 0.05 ng/mL in standard solutions. The detection limit of the peak height method was 0.1 ng/mL and was estimated to be < 20 ng/g in plant materials. Received: 25 September 1998 / Revised: 15 February 1999 / Accepted: 18 February 1999     

Quantification of the plant-derived hallucinogen Salvinorin A in conventional and non-conventional biological fluids by gas chromatography/mass spectrometry after Salvia divinorum smoking

A gas chromatography method with mass spectrometric detection is described for the determination of Salvinorin A, the main active ingredient of the hallucinogenic mint Salvia divinorum. The method was validated in plasma, urine, saliva and sweat using 17-alpha-methyltestosterone as internal standard. The analytes were extracted from biological matrices with chloroform/isopropanol (9:1, v/v). Chromatography was performed on a 5% phenyl methyl silicone capillary column and analytes were determined in the selected ion monitoring mode. The method was validated over the concentration range 0.015-5 microg/mL plasma, urine and saliva and 0.01-5 microg/patch in the case of sweat. Mean recoveries ranged between 77.1 and 92.7% for Salvinorin A in different biological matrices, with precision and accuracy always better than 15%. The method was applied to the analysis of urine, saliva and sweat from two consumers after smoking 75 mg plant leaves to verify the presence of the active ingredient of S. divinorum in human biological fluids as a biomarker of plant consumption. Salvinorin A was detected in urine (2.4 and 10.9 ng/mL) and saliva (11.1 and 25.0 ng/mL), but not in sweat patches from consumers.     

Determination of total dissolved phosphorus in water samples by axial inductively coupled plasma atomic emission spectrometry

A procedure was developed to determine total dissolved phosphorus in groundwater-like samples using axial ICP-AES. Severe and peculiar matrix effects (strongly positive at lower and leveling off at higher matrix concentrations) in the presence of Na and Ca were observed. To reduce these matrix effects, a double approach was utilized consisting of a so-called minimum matrix in combination with an internal standard (Ga in this case). The ‘minimum matrix’ (small amounts of K, Mg and Na) was only added to the standard solution(s) used for the calibration. The detection limit for the whole procedure was 12 μg/L using the P213 nm line. Residual matrix effects were less than 3% (P213 nm line). Received: 21 February 1997 / Revised: 5 June 1997 / Accepted: 6 June 1997     

Determination of total dissolved phosphorus in water samples by axial inductively coupled plasma atomic emission spectrometry

A procedure was developed to determine total dissolved phosphorus in groundwater-like samples using axial ICP-AES. Severe and peculiar matrix effects (strongly positive at lower and leveling off at higher matrix concentrations) in the presence of Na and Ca were observed. To reduce these matrix effects, a double approach was utilized consisting of a so-called minimum matrix in combination with an internal standard (Ga in this case). The ‘minimum matrix’ (small amounts of K, Mg and Na) was only added to the standard solution(s) used for the calibration. The detection limit for the whole procedure was 12 μg/L using the P213 nm line. Residual matrix effects were less than 3% (P213 nm line). Received: 21 February 1997 / Revised: 5 June 1997 / Accepted: 6 June 1997     

Determination of Trihalomethanes in Drinking Water by Dispersive Liquid–Liquid Microextraction then Gas Chromatography with Electron-Capture Detection

Dispersive liquid–liquid microextraction (DLLME) has been used for preconcentration of trihalomethanes (THMs) in drinking water. In DLLME an appropriate mixture of an extraction solvent (20.0 μL carbon disulfide) and a disperser solvent (0.50 mL acetone) was used to form a cloudy solution from a 5.00-mL aqueous sample containing the analytes. After phase separation by centrifugation the enriched analytes in the settled phase (6.5 ± 0.3 μL) were determined by gas chromatography with electron-capture detection (GC–ECD). Different experimental conditions, for example type and volume of extraction solvent, type and volume of disperser solvent, extraction time, and use of salt, were investigated. After optimization of the conditions the enrichment factor ranged from 116 to 355 and the limit of detection from 0.005 to 0.040 μg L⁻¹. The linear range was 0.01–50 μg L⁻¹ (more than three orders of magnitude). Relative standard deviations (RSDs) for 2.00 μg L⁻¹ THMs in water, with internal standard, were in the range 1.3–5.9% (n = 5); without internal standard they were in the range 3.7–8.6% (n = 5). The method was successfully used for extraction and determination of THMs in drinking water. The results showed that total concentrations of THMs in drinking water from two areas of Tehran, Iran, were approximately 10.9 and 14.1 μg L⁻¹. Relative recoveries from samples of drinking water spiked at levels of 2.00 and 5.00 μg L⁻¹ were 95.0–107.8 and 92.2–100.9%, respectively. Comparison of this method with other methods indicates DLLME is a very simple and rapid (less than 2 min) method which requires a small volume of sample (5 mL).     

Use of spermine and thiabendazole as analyte protectants to improve direct analysis of 16 carbamates by gas chromatography–mass spectrometry in green vegetable matrices

The carbamates are a well-known thermosensible pesticides class, which are highly prone to degradation via fragmentation and/or rearrangement mechanisms leading to a difficult direct gas chromatography (GC) analysis, i.e., without derivatization. In this paper, spermine and thiabendazole both at 1 mg/mL were highlighted as efficient analyte protectants to improve the direct and simultaneous analysis of 16 carbamates both in solvent and green vegetable matrices. These two molecules were compared in mixture or in combination with three well-known efficient analyte protectants 3-ethoxy-1,2-propanediol, d-sorbitol, and l-gulonic acid-γ-lactone. The potential benefits were investigated in GC hyphenated to mass spectrometry (GC–MS) with two injection modes: programmable temperature vaporizing injector in a solvent split mode (PTV-SSI) and on-column injection (OCI). It was shown that the combined effect of the five protective agents led to the best sensitivity improvement with limits of detection between 0.1–0.4 and 0.03–0.1 μg/kg and limits of quantification between 0.3–1.1 and 0.1–0.5 μg/kg for PTV-SSI and OCI mode, respectively. The correlation coefficients from the analyzed 1–500 μg/kg range were all >0.999 both in the solvent and matrices studied. The recoveries of carbamates from three spiked matrices over five replicates at 20 and 100 μg/kg were in the range 90–107% with relative standard deviation (RSD) equal to 2–7% for PTV-SSI and 92–107% with an RSD equal to 1–6% for OCI. The use of spermine and thiabendazole with other analyte protectants shows very efficient partial or total reduction of breakdown of the most sensitive carbamates such as the N-sulfenylated ones. An erratum to this article can be found at     

Rapid and simple chromatographic separation of V(V) and V(IV) using KH-phthalate and their determination by flame atomic absorption spectrometry

A method was developed for the chromatographic separation of V(V) and V(IV) based on the different sorption forces of these vanadium species in C18 columns in presence of KH-phthalate. The vanadium species were detected with a flame atomic absorption spectrometer with acetylene/N₂O flame. The detection limits (3σ) of V(V) and V(IV) were 0.18 μg/mL and 0.15 μg/mL, respectively. The relative standard deviations (N = 5) are 4.2% and 3.4% for 20–20 μg/mL V(V) and V(IV), respectively. The sampling frequency is 75/h. Because of the special interaction occurring between phthalate and V(IV) on the C18 column and the acetylene/N₂O flame atomic absorption detection, practically no interferences can be detected even in large inorganic matrix. Received: 20 February 1997 / Revised: 2 June 1997 / Accepted: 7 June 1997     

High-performance liquid chromatography–tandem mass spectrometry method for quantifying sulfonylurea herbicides in human urine: reconsidering the validation process

We have developed a method for measuring 17 sulfonylurea (SU) herbicides in human urine. Urine samples were extracted using solid phase extraction (SPE), preconcentrated, and analyzed by high-performance liquid chromatography–tandem mass spectrometry using turboionspray atmospheric pressure ionization. Carbon 13-labeled ethametsulfuron methyl was used as an internal standard. Chromatographic retention times were under 7 minutes. Total throughput was estimated as >100 samples per day. Because only one labeled internal standard was available for the analysis, we were forced to reconsider and restructure the validation process to include stringent stability tests and analyses of urine matrices of differing compositions. We describe our restructured validation process and the critical evaluation it provides for the method developed. The limits of detection (LOD) ranged from 0.05 μg/L to 0.10 μg/L with an average LOD of 0.06 μg/L. Average total relative standard deviations were 17%, 12% and 8% at 0.1 μg/L, 3.0 μg/L and 10 μg/L, respectively. Average extraction efficiencies of the SPE cartridges were 87% and 86% at 2.5 μg/L and 25 μg/L, respectively. Chemical degradation in acetonitrile and urine was monitored over 250 days. Estimated days for 10% and 50% degradation in urine and acetonitrile ranged from 0.7 days to >318 days. The influence of matrix effects on precision and accuracy was also explored. Electronic Supplementary Material Supplementary material is available for this article at For additional information, contact Anderson Olsson at     

Interlaboratory comparison study for the determination of the Fusarium mycotoxins deoxynivalenol in wheat and zearalenone in maize using different methods

Seventeen laboratories from six different countries, using their usual in-house methods, participated in an interlaboratory comparison test for the determination of the Fusarium mycotoxins deoxynivalenol (DON) in wheat and zearalenone (ZON) in maize. The toxins generally were extracted from maize and wheat employing mixtures of water, acidified water with an organic solvent or even pure water (for DON). While participants who used enzyme linked immuno sorbent assays (ELISA) for the determination of DON did not perform any clean-up, various techniques were applied for the purification of raw extracts (e.g. liquid/liquid extraction, solid phase extraction (SPE), immuno affinity chromatography (IAC)). For the final separation/quantification step either high performance liquid chromatography (HPLC) (mostly for ZON), gas chromatography (GC) (for DON) or ELISA were employed by participants. The aim of this study was to obtain information about the state of the art of mycotoxin analysis in cereals and to support a knowledge and experience exchange between the participating laboratories in the field of mycotoxin analysis. For each mycotoxin 5 different sample types were distributed, standard solutions (10.10 μg/ml ZON in methanol, 10.09 μg/ml DON in ethyl acetate), blank materials, spiked samples (75.1 μg/kg and 378.3 μg/kg ZON in maize, 126.2 μg/kg and 2519 μg/kg DON in wheat) and naturally contaminated maize and wheat. Coefficients of variation (CV) between laboratory mean results (outliers excluded) ranged from 6.2 to 27.7% for ZON and from 18.9 to 30.0% for DON. Except for the maize samples spiked at 75.1 μg/kg ZON the overall means (outliers rejected) statistically could not be distinguished from the respective target values. Average recoveries of the reported results ranged from 87.7 to 96.2% for ZON and from 94.2 to 108.5% for DON. Received: 2 December 1996 / Revised: 17 February 1997 / Accepted: 18 February 1997     

Determination of selected pesticides by GC with simultaneous detection by MS (NCI) and μ-ECD in fruit and vegetable matrices

A gas chromatography–mass spectrometry method in negative chemical ionization mode has been developed incorporating simultaneous detection using a micro-electron capture detector (μ-ECD) for the determination of pesticides in fruits and vegetables. This instrument configuration uses a three-way splitter device which divides the effluent from the analytical column between the two detectors with the split ratio 1:0.1 (MSD/μ-ECD) in each run. The μ-ECD was used for confirmation purposes. Validation of the method was performed on three matrices: tomato, apple, and orange. The ethyl acetate method was assayed; recovery studies were performed at 10 and 100 μg/kg. Recoveries between 70% and 120% were achieved and relative standard deviations lower than 20% (n = 5) were obtained for all pesticides and matrices studied. Limits of quantification lower than 10 μg/kg were obtained for 100% of pesticides in all of the matrices. Limits of quantification lower than 2.5 μg/kg were achieved for 77.8% of pesticides in the tomato and apple matrices, and for 72.2% of pesticides in the orange matrix. The method showed linear response in the concentration range tested (2.5–500 μg/kg) with correlation coefficients >0.99. Good repeatability and reproducibility results were obtained in all cases, with relative standard deviations lower than 16.7% and 20%, respectively. Finally, 20 incurred samples were analyzed using the proposed method. The simultaneous use of the two detectors was satisfactory for the analysis of these real samples. The total number of pesticides identified was 25. The number of samples which contained at least one pesticide was 15—this represented 75% of the total number of samples studied.     

Quantification of arecoline (areca nut alkaloid) in neonatal biological matrices by high-performance liquid chromatography/electrospray quadrupole mass spectrometry

A high-performance liquid chromatography (HPLC) method with mass spectrometric detection is described for determination of arecoline in newborn meconium, urine and cord serum, using pilocarpine as internal standard. The analytes were extracted from neonatal biological matrices with chloroform/isopropanol (95:5, v/v) at alkaline pH. Extracts were analyzed by HPLC coupled to an electrospray (ESI) interface and a quadrupole mass spectrometer. Chromatography was performed on a C(8) reversed-phase column using 10 mM ammonium acetate (pH 4.3)/acetonitrile (90:10, v/v) as mobile phase. The mass spectrometer was operated in selected ion monitoring mode. The method was validated over the concentration range 0.005-1.00 micro g/g meconium, 0.004-1.00 micro g/mL cord serum and 0.001-1.00 micro /mL urine. Mean recoveries ranged between 86.5 and 90.7% for arecoline in the different biological matrices, with precision always better than 10%. The quantification limits of arecoline were 0.005 micro g/g meconium, 0.004 micro g/mL cord serum, and 0.001 micro g/mL urine. The method was applied to the analysis of neonatal biological matrices to assess eventual fetal exposition to arecoline. Two newborns from Asian mothers who declared areca nut consumption presented arecoline in meconium with concentrations in the range 0.006-0.008 micro g/g; also the urine from one neonate tested positive for the drug.     

Flow injection spectrophotometric determination of ultra trace amounts of oxalic acid

A new simple, sensitive and rapid catalytic-spectrophotometric method for the determination of oxalic acid has been described based on its catalytic effect on the redox reaction between dichromate and Brilliant cresyl blue in acidic media by means of a flow injection analysis method. The color change of Brilliant cresyl blue due to its oxidation was monitored spectrophotometrically at 625 nm. The calibration graph was linear in the range of 0.020–4.70 μg/mL oxalic acid with a limit of detection 0.005 μg/mL of oxalic acid. The relative standard deviation for ten replicate measurements of 0.020 μg/mL and 0.900 μg/mL was 2.2% and 1.7%, respectively. No serious interference was identified. Oxalic acid was determined in wastewater and in spinach by the proposed method with satisfactory results. Received: 28 October 1999 / Revised: 13 January 2000 / /Accepted: 20 January 2000     

Sequential solid-phase extraction with cyanopropyl bonded-phase cartridges for trace enrichment of PCBs and chlorinated pesticides from water samples

Summary Gas chromatography of polychlorinated biphenyls and chlorinated pesticides in water samples has been performed after adsorption from a 50–250 mL sample on to a cartridge containing 100 mg cyanopropyl-bonded porous silica. The PCBs are desorbed with 500 μL ethyl acetate, which is concentrated and analysed by gas chromatography with electron-capture detection (GC-ECD). The average recovery of 1 ppb PCB congeners at from distilled water and from Marta river water is ≥95% (standard deviation ≤2.5). The average recovery of 20 ppb Aroclor 1260 from Marta river water was ≥91% (standard deviation ≤3.5). In the separation of the PCBs from the chlorinated pesticides only aldrin, heptachlor and 4,4′-DDD are adsorbed with the PCBs by the CN Sep-Pak cartridge. The method proposed is rapid, simple and reproducible.     

Determination of carbaryl in foods by solid-phase room-temperature phosphorimetry

A phosphorimetric solid phase assay is proposed for the determination of the pesticide carbaryl (CBL) at room temperature. CBL was spotted on filter paper together with Tl(I) as heavy metal, and dried for 3 min, after which the diffuse transmitted phosphorescence was measured using two quartz plates to avoid the quenching effect produced by atmospheric oxygen. The linear dynamic range was 0.5–4.0 μg/mL and the detection and quantification limits were 0.09 and 0.31 μg/mL, respectively. The precision of the method, expressed as relative standard deviation, was 2.3% for a sample containing 2.0 μg/mL of CBL. The method was applied to the determination of CBL residues in cereals, potatoes and waters, obtaining recoveries ranging between 92 and 105%. Received: 10 October 1997 / Revised: 2 February 1998 / Accepted: 7 February 1998     

Determination of gallic acid and salidroside in Rhodiola and its preparation by capillary electrophoresis

A new, simple, and rapid capillary electrophoresis (CE) method employing hexadimethrine bromide (HDB) as electroosmotic flow (EOF) modifier was developed for the identification and quantitative determination of two pharmaceutically active constituents—gallic acid (GA) and salidroside (S)—in extracts of Rhodiola root and its medicinal preparation. The optimum separation was achieved at pH 11.00 with the use of 10 mM borate buffer containing 0.001% (w/v) of HDB. The applied voltage was ∼15 kV and the capillary temperature was kept constant at 25°C. m-Phthalic acid was used as an internal standard for quantification. The calibration dependences exhibited good linearity for the ratios of the concentrations of standard samples and internal standard and the ratios of the peak area of samples and internal standard over the concentration range from 24 to 1200 μg/mL for GA and 2.4 to 72 μg/mL for S. The correlation coefficients were 0.9999 and 0.9997, and the detection limits of the CE method corresponding to a signal-to-noise ratio of three were 6 and 2 μg/mL for GA and S, respectively. The relative standard deviations of the relative migration time and the relative peak area of samples were 0.5 and 4.0% for GA and 1.9 and 5.3% for S. The effects of buffer pH and the concentration of HDB on the resolution were studied systematically. The contents of these two active compounds in Rhodiola root and its preparation were successfully determined over 6 min with satisfactory repeatability and recovery. The text was submitted by the authors in English.     

Determination of Abacavir in maternal plasma, amniotic fluid, fetal and placental tissues by a polarity switching liquid chromatography/tandem mass spectrometry method

A rapid and efficient high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) method for the determination of concentrations of the carbocyclic nucleoside antiviral Abacavir in maternal rat plasma, amniotic fluid, placental and fetal tissue samples has been developed and validated. All tissue samples were homogenized in water prior to analysis and all samples were prepared by acetonitrile precipitation followed by dilution with HPLC-grade water. Separation of the analyte and internal standard from the matrices was achieved on a C(8) analytical column (2.1 x 150 mm, 5 microm particle size). The mobile phase consisted of 10 mM ammonium acetate/acetonitrile using a gradient method at a flow rate of 0.25 mL/min for all matrices. The method yields retention times of approximately 3.4 and 5.1 min for the internal standard (Azidouridine) and Abacavir, respectively. For all matrices the limit of detection was approximately 1 ng/ml. Recoveries from the different matrices ranged from 53-87% for Abacavir and from 69-84% for Azidouridine. Within- and between-run precision (%RSD) and accuracy (%Error) were under 15% for all matrices.