On the dynamics of the TPPS4 aggregation in aqueous solutions: successive formation of H and J aggregates

The dynamics of aggregation of meso-tetrakis (p-sulfonatofenyl) porphyrin (TPPS4) in function of its concentration, pH and ionic strength was studied by optical absorption, fluorescence and resonance light scattering (RLS) techniques. In the region of pH, where TPPS4 exists in biprotonated form, the addition of NaCl induces the TPPS4 aggregation due to the formation of the "cloud" of counter ions around the TPPS4 molecule thus reducing electrostatic repulsion between the porphyrin molecules. The formation of this "cloud" shifts the pKa value to acid region (from 5.0 in the absence of salt to 4.5 at [NaCl] = 0.4 M), reduces the TPPS4 absorption in all spectral range and quantum yield and lifetime of fluorescence (from 0.27 to 0.17 and from 4.00+/-0.04 to 3.00+/-0.03 ns in the absence of salt and in the presence of NaCl, respectively). The aggregation process involves two successive stages: initially H aggregates are formed, which in time are transformed in J ones. The existence of these two stages was confirmed by the fluorescence and RLS data. The kinetics of the formation of J aggregates is characterized by the induction time t1 and the average growth time t2, which depend on both TPPS4 and salt concentrations. The induction period t1 appears as a result of initial formation of H aggregates and their successive transformation in J ones. At very high TPPS4 concentrations, the J aggregates are united in more complex structures such as hollow cylinders or helixes.     

Chiral conversion and memory of TPPS J-aggregates in complex micelles: PEG-b-PDMAEMA/TPPS

In the presence of tryptophan (Trp), complex micelles were prepared by 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (TPPS) and poly(ethylene glycol)-block-poly(2-(dimethylamino)ethyl methylacrylate) (PEG-b-PDMAEMA) in aqueous solutions at pH 1.8. Different mixing sequences led to different morphologies. Spheres and nanorods of small size were obtained in sequence I (P/Trp+TPPS) where TPPS was added into the mixed solution of PEG-b-PDMAEMA and Trp. More nanorods of larger length were achieved in sequence II (TPPS/Trp+P) where the copolymer was added as the last component. Two types of supramolecular chirality of TPPS aggregates caused by mixing sequences were investigated. In (P/Trp+TPPS), the circular dichroism (CD) signal of H-band was in line with the chirality of Trp while that of J-band exhibited an opposite signal (Chirality I). In (TPPS/Trp+P), chiral signals at both H- and J-bands followed that of Trp (Chirality II). The conversion between the two types of chirality can be accomplished by modulating the molar ratio of the repeating units on block PDMAEMA to TPPS, or a cycle of pH 1.8-5.5-1.8 processing on the micelle solution. In addition, the supramolecular chirality can be memorized via strong electrostatic interaction with achiral copolymer even after removal of the chiral template, but only Chirality II can be cyclically "switched-off-on".     

Influence of droplet characteristics on the formation of oil-in-water emulsions stabilized by surfactant-chitosan layers

The objective of this study was to establish the optimum conditions for preparing stable oil-in-water emulsions containing droplets surrounded by surfactant-chitosan layers. A primary emulsion containing small droplets (d32 approximately = 0.3 microm) was prepared by homogenizing 20 wt% corn oil with 80 wt% emulsifier solution (20 mM SDS, 100 mM acetate buffer, pH 3) using a high-pressure valve homogenizer. The primary emulsion was diluted with chitosan solutions to produce secondary emulsions with a range of oil and chitosan concentrations (0.5-10 wt% corn oil, 0-1 wt% chitosan, pH 3). The secondary emulsions were sonicated to help disrupt any droplet aggregates formed during the mixing process. The electrical charge, particle size, and amount of free chitosan in the emulsions were then measured. The droplet charge changed from negative to positive as the amount of chitosan in the emulsions was increased, reaching a relatively constant value (approximately +50 mV) above a critical chitosan concentration (C(Sat)), which indicated that saturation of the droplet surfaces with chitosan occurred. Extremely large droplet aggregates were formed at chitosan concentrations below C(Sat), but stable emulsions could be formed above C(Sat) provided the droplet concentration was not high enough for depletion flocculation to occur. Interestingly, we found that stable multilayer emulsions could also be formed by mixing chitosan with an emulsion stabilized by a nonionic surfactant (Tween 20) due to the fact the initial droplets had some negative charge. The information obtained from this study is useful for preparing emulsions stabilized by multilayer interfacial layers.     

Amphiphilic cyclodextrin carriers embedding porphyrins: charge and size modulation of colloidal stability in heterotopic aggregates

The interaction between the anionic 5,10,15,20-tetrakis(4-sulfonatophenyl)-21H,23H-porphyrin (TPPS) and cationic vesicles formed by heptakis(2-omega-amino-O-oligo(ethylene oxide)-6-hexylthio)-beta-cyclodextrin (SC6CDNH2) has been investigated in detail through a combination of elastic light scattering (ELS), quasi-elastic light scattering (QELS), zeta potential measurements, and time-resolved fluorescence anisotropy. ELS experiments provided the first structural characterization of these cationic vesicles both in the absence and in the presence of TPPS porphyrin, modeling the system as a spherical particle described by a single thin shell form factor. The structure of mixed hetero-aggregates is modulated by charge and size of the two components as function of different porphyrin/cyclodextrin (CD) molar ratios. At the limiting molar ratio studied, the absolute value of zeta potential (/zeta/ = 12.5 mV) seems to be a reference value for the formation of stable colloidal CD vesicular aggregates at thermodynamic equilibrium. New insights on the structure of these heterotopic colloids have been obtained by analysis of rotational correlation times at different molar ratios exploiting time-resolved fluorescence anisotropy experiments. At high porphyrin loads, the anisotropy decays behave as monoexponentials and the rotational correlation times (1-2 ns) together with the r(0) values close to zero suggest the presence of small amounts of TPPS embedded in a hydrophobic environment either in monomeric or in aggregated form. At the lower porphyrin/CD molar ratios, the anisotropy decays exhibit a double-exponential behavior showing a predominant component with a slow rotational correlation time (20-25 ns) and limiting anisotropy values of approximately 0.15. This component has been assigned to molecules that are more stabilized onto the CD vesicles, that is, porphyrins embedded into the oligo-ethylene "wall" of the CD vesicles. Scanning near-field optical microscopy of the samples evaporated on glass surfaces gave further insights on the morphology and optical properties of these systems, confirming the embedding of TPPS on the vesicles and evidencing the role of the solvent.     

Role of the hydrophobic effect in the transfer of chirality from molecules to complex systems: from chiral surfactants to porphyrin/surfactant aggregates

The interaction between the achiral sulfonated porphyrin 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin, H 2TPPS 4 (4-), and two chiral cationic surfactants has been studied by optical absorption, fluorescence, and circular dichroism (CD) spectroscopies. At surfactant concentrations above the critical micellar concentration (cmc) the porphyrin is included in the micellar aggregates, but it is CD silent. Below the cmc at a definite porphyrin/surfactant stoichiometry the formation of heteroaggregates with transfer of chirality to the porphyrin chromophore occurs. The preferred surfactant/porphyrin stoichiometry is 3:1, which suggests a structure driven by electrostatic and hydrophobic interactions between porphyrin and surfactant and dipolar and ionic interactions with the water solution. At surfactant concentrations above the cmc, depending on the protocol of preparation of the samples, the formation of the two kinds of aggregates can be observed, reversible for the simple surfactant micelles incorporating the porphyrin, but irreversible for the heteroaggregates.     

Intracellular localization of meso-tetraphenylporphine tetrasulphonate probed by time-resolved and microscopic fluorescence spectroscopy.

The effects of solvent pH on spectral properties and fluorescence decay kinetics were investigated in order to characterize the microenvironment of meso-tetraphenylporphine tetrasulphonate (TPPS4) taken up by cells. Steady-state absorption and fluorescence spectra of TPPS4 in buffer solutions of different pH were used to identify a ring protonated species at pH less than or equal to 4. This dictation could also be distinguished from the unprotonated form by its altered fluorescence decay time (3.5 vs. 11.4 ns). In addition, time-resolved spectroscopy gave some evidence of a monocationic species existing at pH 6-9. This was concluded from the occurrence of another component with a decay time of 5 ns. Measurements of the spectral and kinetic properties of the fluorescence emission of single epithelial cells (RR1022) incubated with TPPS4 indicated that the sensitizer was mainly localized in a microenvironment with a pH of 5, a value which occurs intracellularly only within lysosomes. Cells kept in the dark exhibited the characteristic spectra of both the dication and the neutral form. The fluorescence decay showed two components with decay times of 2.6 ns and 10.6 ns. Irradiation of the cells changed the decay times to 4.6 ns and 13.4 ns and the dication fluorescence emission peak vanished, which is in accordance with the results obtained from buffer solutions at pH greater than or equal to 6. Therefore, we deduce that the photodynamic action leads to a rupture of the lysosomes and that the sensitizer is released into the surrounding cytoplasm.     

Kinetics and mechanism of ring transformation of S-[1-(4-methoxyphenyl)pyrrolidin-2-on-3-yl]isothiuronium bromide to 2-methylimino-5-[2-(4-methoxyphenylamino)ethyl]thiazolidin-4-one

The kinetics and mechanism of transformation reaction of S-[1-(4- methoxyphenyl)pyrrolidin-2-one-3-yl]-N-methyl-isothiuronium bromide into 2-methylimino-5-[2-(4-methoxyphenylamino) ethyl)]thiazolidin-4-one have been studied in aqueous solutions of amine buffers (pH 8.1-11.5) and sodium hydroxide solutions (0.005-0.5 mol l-1) at 25 degrees C and at I = 1 mol l-1 at pseudo-first-order reaction conditions. The kinetics observed shows that the transformation reaction is subject to general base, general acid, and hydroxide-ion catalyses. The rate-limiting step of transformation is the splitting-off a proton from the tetrahedral intermediate In. The value of pKa for S-[1-(4-methoxyphenyl)- pyrrolidin-2-one-3-yl]-N-methylisothiuronium bromide has been determined from the kinetic data (pKa = 8.75 +/- 0.10) and by potentiometric titration (pKa = 8.90 +/- 0.05). With increasing pKa value of the acid buffer component, the value of Br?nsted coefficient beta gradually decreases from about 0.7 to almost zero. The value of pKa approximately 10 for the intermediate to base-catalysed transformation has been found from this dependence. In the N-methylpyrrolidine and triethylamine buffers, the rate-limiting step of transformation is changed into ring opening of In-, and the general-base-catalysed reaction changes into a specific-base-catalysed one.     

Quantitative phosphorescence study of interactions of cytosine and cytidine and its nucleotides in frozen aqueous solution: evidence for anomalous heavy-atom effect

Phosphorescence vs. pH titration curves of cytosine, cytidine, cytidine-5'-mono-phosphate (CMP), -diphosphate (CDP) and -triphosphate (CTP) were obtained in methanol/water 10/90 v/v and in various aqueous sodium halide solutions frozen at 77 degrees K. As shown by the shape of the titration curve, molecular aggregates or "puddles" of cytosine and cytidine were shown to occur only in relatively concentrated frozen solution (10(-3)M), these aggregates being dissociated in dilute frozen solutions (相似文献   

Adsorption Behavior of a Water-soluble Porphyrin at the Glass-water Interface as Studied by Synchronous Total Internal Reflection Fluorescence Spectroscopy

Total imernal reflection fluorescence spectroscopy (TIRF) and synchronous scanning technique were combined to study the adsorption behavior of the meso-tetrakis (4-sulfonatophenyl)porphyrin (TPPS) at the glass-water interface without any surfactant. The pH dependence of synchronous fluorescence signal at the interface was analyzed. Both unprotonated (TPPS^4-) and diprotonated (H2TPPS^2-) forms of TPPS were observed at the interface. But the interface favored the adsorption of. The apparent estimated pKa2 value shifted from 5.00 in the bulk solution to 2.7 at the interface. STIRF provides a good technique to study multi-component systems at the interface.     

Interaction of porphyrins with a dendrimer template: self-aggregation controlled by pH

The interaction between self-aggregated porphyrins such as 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) and 5,10,15,20-tetrakis(4-phosphonatophenyl)porphyrin (TPPP), and a generation 5 (G5) PAMAM dendrimer template is governed by minute differences of porphyrin acido-basic properties. While at neutral pH both monomeric TPPS and TPPP form complexes with G5, decreasing pH did not lead to porphyrin ring protonation (pK(a) approximately 5) but rather to the preferential formation of H-aggregates (probably H-dimers), most likely due to protonation of the G5. Upon further acidification of the solution, this face-to-face orientation of the porphyrin units is being converted to edge-to-edge aligned J-aggregates with a tightly defined structure. This process starts by protonation of the porphyrin ring at pH below 2.3 and 2.8 for TPPS and TPPP, respectively. The AFM imaging of porphyrin/G5 nanostructures obtained at pH 0.7 shows the formation of long nanorods of TPPS with partially aggregated G5 and small aggregates of TPPP connected to individual G5 molecules.     

Kinetics and mechanism of the oxidation of water soluble porphyrin FeIIITPPS with hydrogen peroxide and the peroxomonosulfate ion

The overall six-electron oxidation of water soluble porphyrin Fe(III)TPPS by hydrogen peroxide and peroxomonosulfate ion was studied by the stopped-flow method with UV-vis detection. A three-step consecutive reaction was observed with two intermediates: Fe(III)TPPS --> Int(1)--> Int(2)--> products. The products were identified as the iron(iii) complex of the biliverdin analog formed from TPPS and 4-sulfobenzoic acid. All the rate constants with both oxidizing agents were determined. Intermediate Int(1) is proposed to be the species (TPPS (+))Fe(IV)=O. Although no unambiguous proposal for the structure of Int(2) can be made, it is most probably the product of the four-electron oxidation of the original Fe(III)TPPS, contains an iron-oxo center and has a dissociable proton with a pK of around 3.1. In spite of the protolytic equilibria occuring in the pH region 2-4, the kinetic observations do not show pH dependence.     

Aggregation behavior of tetrakis(4-sulfonatophenyl)porphyrin in AOT/water/decane microemulsions

AOT/water/decane microemulsions have been used to entrap the water-soluble 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS4). Quasi-elastic light scattering technique has confirmed the confinement of the porphyrin and its various aggregates into the inner water pool. Various species have been detected as function of the size of the microemulsions, concentration of the porphyrin, pH, and aging of the solutions by using a combination of UV-vis absorption, steady fluorescence emission, fluorescence lifetime measurements, and time-resolved fluorescence anisotropy. Under neutral pH conditions, the porphyrin is present as the free base monomer (S414) in the inner water compartment, and it is free to rotate when the size of the droplet is large enough and the porphyrin concentration is low. On increasing the concentration and/or decreasing the microemulsion size, a H-dimer of the free base (S406) is prevalently formed. Aging both the S414 and S406 species leads to the formation of a new species (S424), which has been postulated as a H-type dimer of the diacid porphyrin. On decreasing the pH, the species S414 and S406 almost instantaneously convert into the diacid porphyrin, which is monomeric (S434). This latter is an intermediate in the eventual formation of J-aggregated TPPS4 (S490). A marked stability has been observed for the S424 species, which do not interconvert on changing the pH of the bulk aqueous phase.     

TPPS和Gemini表面活性剂的复合膜及其手性的研究

研究了一种新的gemini表面活性剂(C12H24-α,ω-(C12H25N＋(CH3)2Br－)2, （简写为C12-C12-C12）和TPPS在气液界面上形成的复合膜及其手性.实验发现,单独C12-C12-C12不能在纯水表面形成稳定的单分子膜，但当亚相中存在TPPS时，可形成稳定的单分子膜.通过水平提拉法将复合膜转移到固体基板上，发现在适当的pH值条件下，TPPS可在复合膜中形成J-聚集体，并且发现，尽管Gemini表面活性剂和TPPS 都 是非手性的，TPPS的J-聚集体表现出强烈的Cotton效应.另外，gemini表面活性剂的两个正电荷中心对TPPS的J-聚集体的手性并不能表现出协同效应.     

阳离子表面活性剂存在下卟啉聚集的光谱研究

报导在阳离子表面活性剂溴化十六烷基三甲铵（CTMAB）存在下mcso-四（对-磺基苯基）卟啉（TPPS_4）发生聚集的电子吸收光谱、荧光光谱和共振光散射光谱特性．结果表明：CTMAB低于1．0×10~(－5)mol·L~(-1)时TPPS_4发生J-型聚集，形成一种交错卡迭式二聚体。在1．0×10~(－5)～1.0×10~(－4)mol·L~(－1)时，J-型聚集产物仍然存在，但TPPS_4的Soret蜂蓝移．如果CTMAB浓度高于1．0×10~（-4）mol·L~（-1），J-型聚集产物消失，出现游离碱卟啉的D_(2h)。吸收特征．相对于水介质，游离碱卟啉的Soret带在CTMAB胶束中红移．     

Disodium guanosine 5'-monophosphate self-associates into nanoscale cylinders at pH 8: a combined diffusion NMR spectroscopy and dynamic light scattering study

We report a combined NMR and dynamic light scattering (DLS) study on the size of supramolecular structures formed by disodium guanosine 5'-monophosphate, Na(2)(5'-GMP), at pH 8. In general, two distinct types of aggregate species are present in an aqueous solution of Na(2)(5'-GMP). One type consists of stacking 5'-GMP monomers, and the other contains stacking G-quartets. Both types of aggregates can be modeled as rodlike cylinders. The cylinder diameter is 10 and 26 A for monomer aggregates and quartet aggregates, respectively. For Na(2)(5'-GMP) concentrations between 18 and 34 wt %, the cylinders formed by stacking G-quartets have an average length between 8 and 30 nm, corresponding to a stack of approximately 24-87 G-quartets. These nanoscale aggregates are significantly larger than what had previously been believed for Na(2)(5'-GMP) self-association at pH 8. The length of both types of 5'-GMP aggregates was found to increase with Na(2)(5'-GMP) concentration but was insensitive to the added NaCl in solution. While the aggregate size for monomer aggregates increases with a decrease in temperature, the size of G-quartet aggregates is essentially independent of temperature. We found that the size of G-quartet aggregates is slightly larger in D(2)O than in H(2)O, whereas the size of monomer aggregates remains the same in D(2)O and in H(2)O. We observed a linear relationship between the axial ratio of the 5'-GMP cylinders and the Na(2)(5'-GMP) concentration for both types of 5'-GMP aggregates, which suggests a common stacking mechanism for monomers and G-quartets.     

2,2,2-trifluoroethanol-induced molten globule state of concanavalin a and energetics of 8-anilinonaphthalene sulfonate binding: calorimetric and spectroscopic investigation

The interaction of 2,2,2-trifluoroethanol (TFE) with concanavalin A has been investigated by using a combination of differential scanning calorimetry, isothermal titration calorimetry (ITC), circular dichroism (CD), and fluorescence spectroscopy at pH 2.5 and 5.2. All of the calorimetric transitions at both the pH values were found to be irreversible. In the presence of 4 mol kg(-1) TFE at pH 2.5, concanavalin A is observed to be in a partially folded state with significant loss of native tertiary structure. The loss of specific side chain interactions in the transition from native to the TFE-induced partially folded state is demonstrated by the loss of cooperative thermal transition and reduction of the CD bands in the aromatic region. Acrylamide quenching, 8-anilinonaphthalene sulfonate (ANS) binding, and energy transfer also suggest that in the presence of 4 mol kg(-1) TFE at pH 2.5 concanavalin A is in a molten globule state. ITC has been used for the first time to characterize the energetics of ANS binding to the molten globule state. ITC results indicate that the binding of ANS to the molten globule state and acid-induced state at pH 2.5 displays heterogeneity with two classes of non-interacting binding sites. The results provide insights into the role of hydrophobic and electrostatic interactions in the binding of ANS to concanavalin A. The results also demonstrate that ITC can be used to characterize the partially folded states of the protein both qualitatively and quantitatively.     

pH值敏感相分离特性的蛋白质酶解试剂研究

通过DEC/NHS偶联反应将胰蛋白酶(Trypsin)连接到具有pH值敏感性的壳聚糖(CS)链上.Trypsin-CS偶联物保留了CS的pH值敏感相分离特性及Trypsjn的酶催化活性.浊度滴定实验表明,此偶联物的临界相分离pH值(CPSP)仍保持在偏中性范围内,并且随CS的分子量降低而略有上升.这种偏中性的CPSP值...     

Application of central composite designs for optimisation of the chromatographic separation of monomethylarsonate and dimethylarsinate and of selenomethionine and selenite by ion-pair chromatography coupled with plasma mass spectrometric detection

Central composite designs (CCDs) were used in the study of the ion-pair chromatographic separation of arsenic and selenium species in tap water: monomethylarsonate, dimethylarsinate, selenomethionine and selenite. The ternary eluent consisted of tetrabutylammonium phosphate (TBA), sodium hydrogenphosphate (Na2HPO4) and 1% acetonitrile. CCD allowed the investigation of the influence of the eluent parameters, which varied from 0.5 to 4.2 mmol l-1 Na2HPO4, 0.5 to 4.2 mmol l-1 TBA and pH 4.9 to 8.2, on the capacity factors (k') of arsenic and selenium compounds. Furthermore, another mathematical model that permitted the variation of the chromatographic selectivity of species, computed from their retention data to be followed, was investigated. This showed the ability to locate the optimum conditions within the experimental design, so that arsenic and selenium species could be simultaneously quantified with good efficiency and resolution. A comparison between the predicted and the experimental response values was made in order to assess the prediction quality of the model. Response surfaces and isoresponse curves obtained from the mathematical models allowed the determination of the optimum chromatographic conditions and the robustness of the method. The predicted optimum zone allowing satisfactory determination of both arsenic and selenium compounds was pH 5.5-6.5, 2.5 mmol l-1 Na2HPO4 and 3.0-4.0 mmol l-1 TBA.     

Supramolecular complex of [60]fullerene-grafted polyelectrolyte and surfactant: mechanism and nanostructures

Water-soluble, pH-responsive mono- and di-[60]fullerene end-capped poly(acrylic acid)s (PAA-C60 and C60-PAA-C60) were synthesized using the atom transfer radical polymerization technique. Isothermal titration calorimetry, dynamic light scattering, UV-vis spectroscopy, and transmission electron microscopy were employed to study the supramolecular complexation between fullerene end-capped PAAs and nonionic surfactant, polyethylene glycol (9-10) tert-octylphenyl ether, also known as Triton X100 (TX100) at different pH values. At pH < 4, TX100 bound specifically to C60 domains driven by hydrophobic and pi-pi interactions between TX100 and fullerene molecules. The binding was exothermic, and the magnitude of the interaction decreased gradually with increasing pH. The amount of polymer-bound TX100 was proportional to the fullerene content, which was approximately 1.3 and approximately 2.5 mM for 5 mM (concentration of carboxylic groups) PAA-C60 and C60-PAA-C60, respectively. Morphological transformations resulting in the formation of polymer/surfactant complex (PSC) precipitates in the course of binding were observed for both polymers. The PSC of PAA-C60 possessed a dense spherical structure, whereas the PSC of C60-PAA-C60 possessed a lamellar stacking structure. The PSC precipitates resolubilized in excess amounts of TX100 to form stable aggregates.     

水溶液中meso-四(4-磺苯基)卟啉二聚体的形成和伏安行为研究

本文研究了水溶液中meso-四(4-磺苯基)卟啉(TPPS)二聚体(Dimer)的各种影响因素和它的电化学性质。提出了二聚体的模型, 说明了水溶性金属卟啉(Cu^2+,Zn^2+, Mn^2+-TPPS)循环伏安图上的一对小尖峰是二聚体在汞电极上吸附还原和氧化的结果。