Thermooxidation rate of diacetate terminated polyoxymethylene with various morphological structures

Thermooxidative degradation of POM films with different morphological structures was investigated in air in the temperature range of 145–160C.The various degrees of crystallinity and different morphologies of POM films were obtained by quenching molten samples to different temperatures. The studies of thermooxidation by IR absorption and weight loss measurements have shown that the process is influenced by sample morphology. The induction period and the advanced states of, chain scission depend on oxygen diffusion into the samples. This process is strongly dependent upon the degree of crystallinity and morphological structure of the polymer.     

Synthesis,characterization, and thermal properties of anhydride terminated and allyl terminated oligoimides

This study concerns the synthesis of anhydride terminated oligoimides (ANTOI) and allyl terminated oligoimides (ALTOI), in acetic acid medium, which allows a very fast reaction and an easy working out. For the preparation of ALTOIs, two methods are compared: the first one consists of adding the monofunctional compound (allyl amine) to the ANTOI already formed during a first step by reaction of a dianhydride (excess) and a diamine. The second method consists of a “one pot” reaction between the dianhydride, the diamine, and the monofunctional allyl–amine compounds, at the beginning of the reaction. The experimental results show that the best control of the molecular weights is obtained with the first method. If the amount of allyl amine is higher than the amount necessary to end cap the ANTOI, a transimidization reaction occurs. Thermal analyses of oligoimides terminated by anhydride or allyl groups have been performed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Transition and thermoresistance properties make ANTOI and ALTOI derivatives interesting as precursors for block polyimide copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2993–3003, 2000     

Isothermal diffusion studies of water-choline chloride-hydrogen chloride system

Sets of four diffusion coefficients were obtained for the water-choline chloridehydrogen chloride system at 25°C. The cross-term diffusion coefficients were found to be very large, and the electrostatic force is the dominant factor for these cross-term diffusion coefficients.     

聚甲氧基二甲醚的合成及其物理化学性质表征

聚甲氧基二甲醚（H₃CO（CH₂O）_nCH₃, PODE_n或DMM_n, n ≥ 2）具有独特的物理化学性质;作为一种柴油添加剂,可以有效提高油品燃烧效率并达到节能减排的目的。首先合成了一系列聚合度n为2、3、4和5单一组分的聚甲氧基二甲醚,采用NMR、FT-IR、Raman和DFT计算等手段对每个聚甲氧基二甲醚单体的化学结构进行表征,并对其在298.15-323.15K温度的密度和黏度进行了测试。结果表明,聚甲氧基二甲醚的密度和黏度随着温度的升高而逐渐降低,随着聚合度的增加而逐渐升高。同时,聚甲氧基二甲醚PODE_n（n =2-5）的闪点和倾点以及溶解热和凝固热均随着聚合度的增加而提高。     

Transitions and mechanical properties in polyoxymethylene/phenoxy blends

Blends of polyoxymethylene (POM) and phenoxy were obtained by melt-blending to determine their phase behavior and to determine, among others, their dynamic and static mechanical properties. The dynamic mechanical spectrum of POM showed an unusually wide peak below the melting temperature that was attributed to amorphous POM close to, and hindered by, the predominant crystalline phase. The T_g of phenoxy was constant with composition, as was probably that of POM, proving their complete immiscibility. The overall mechanical properties of the blends, however, were those of a compatible blend. The synergism in ductility observed in POM-poor blends was partially attributed to their lesser crystalline character. © 1996 John Wiley & Sons, Inc.     

Structural aspects of high temperature thermosets - Bismaleimide/propargyl terminated resin system-polymerization and degradation studies

Bispropargyl ether of bisphenol-A (BPEBPA), 4,4′-bismaleimido diphenyl ether (BMIE) and a blend consisting 60 mol% of BPEBPA and 40 mol% of BMIE are prepared. The materials are structurally characterized by FTIR. The curing characteristics of the monomers are measured by FTIR and DSC. The results indicated that BPEBPA-BMIE blend has low ΔH_cure (J g⁻¹) for the thermal polymerization and the whole temperature window for the exothermic curing reaction is shifted to lower temperature compared to BPEBPA. Borchardt and Daniels method is used to study the cure kinetics of the materials. The thermal curing of BMIE requires activation energy of 156.0 kJ mol⁻¹ whereas BPEBPA needs slightly higher activation energy (177.2 kJ mol⁻¹). From the TG studies, it can be concluded that the cured BPEBPA exhibits higher thermal stability than the cured BMIE due to the more complex network structure that are formed during thermal polymerization of BPEBPA. Dharwadkar and Kharkhanavala equation is employed to calculate the activation energy needed for the thermal degradation of the thermally cured materials. BPEBPA shows much higher activation energy (65.5 kJ mol⁻¹) for thermal degradation indicating the higher thermal stability over the other two materials (BMIE: 42.5 kJ mol⁻¹ and BPEBPA-BMIE blend: 46.9 kJ mol⁻¹). The isothermal degradation of cured materials is effected in nitrogen atmosphere for constant time interval (10 min). The detailed analysis of the degradation products by GC-MS revealed the formation of phenols and several substituted phenols. This finding hints that the competitive C-C and C-O scissions of the chromene ring units formed via the Claisen rearrangement of the aryl propargyl ether system present in BPEBPA is operative.     

Thermal behaviour of ethynyl and ethenyl terminated imide resins

A series of ethynyl and ethenyl end-capped imide resins were synthesised by the reaction of 9,9-bis(4-aminophenyl) fluorene (BAF) with pyromellitic dianhydride (PMDA)3/3′, 4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and 3-ethynyl aniline/maleic anhydride. Structural characterisation was done by infra red and elemental analysis. Thermal characterisation was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperatures of cured resins were above 200°C in nitrogen atmosphere. Char yield at 800°C ranged from 59–65.5%.     

Electric and thermogravimetric properties of brownmillerites based on barium oxides

The electric and thermogravimetric properties of oxygen-deficient perovskite-like complex oxides Ba₂HoGaO₅, Ba₂YGaO₅, Ba₂ScInO₅, and Ba₂Sc₂O₅ are studied. It is found that these phases are capable of intercalating water from a gas phase; however, the total water amount is smaller than the supposed nominal concentration of oxygen vacancies calculated from formula A₂BB′O₅[V _O]₁. A comparison of the temperature dependences of conductivities suggests that the highest oxygen-ion conductivity is inherent in the phases with a statistical arrangement of oxygen vacancies (Ba₂Sc₂O₅, Ba₂ScInO₅). In a humid atmosphere (when the contribution of proton conductivity is significant), the total conductivity alters in line with the oxygen-ion conductivity, i.e. it increases in the series Ba₂YGaO₅-Ba₂HoGaO₅-Ba₂ScInO₅-Ba₂Sc₂O₅.     

A new and highly efficient formaldehyde absorbent of polyoxymethylene

A new type of highly efficient formaldehyde (FA) absorbent of polyoxymethylene (POM), hexamethylenediamine–formaldehyde polycondensates (HF) was prepared by the condensation reaction of hexamethylenediamine (HA) and FA. The effects of the synthetic technique including FA/HA molar ratio, reaction temperature and dispersant dosage on the thermal stability of POM/HF were studied, and finely divided, slightly branched HF polycondensates with high molecular weight and relatively high processing thermal stability were obtained. The thermal stabilization effect of HF on POM was studied through the isothermal weight loss analysis, FA emission amount (FEA) measurement, and balance torque analysis, which showed that HF had better thermal stabilization effect on POM than the commonly used FA‐absorbent melamine (MA). In order to improve the crystallization performance and mechanical properties of POM, the nucleation effect of HF on POM was studied by means of polarized light microscopy (PLM), isothermal and nonisothermal differential scanning calorimetry (DSC), indicating that HF had remarkable nucleation effect on POM. The investigation of mechanical properties showed that the addition of HF could improve the impact toughness of POM to a certain degree. Copyright © 2008 John Wiley & Sons, Ltd.     

Mechanical properties and structure relationships in drawn fibers of elastomer–polyoxymethylene blends

Superdrawn fibers of an elastomer–poly(oxymethylene) (POM) blend have been prepared and investigated in terms of the structure and mechanical properties. The development of the mechanical properties along the fiber axis and the formation of a higher order structure during drawing were slightly retarded by blending, but the loop tenacity increased greatly with the elastomer content. The blend microtextures had an immiscible and phase-separated morphology in which the elastomer was dispersed in the form of streaks between the oriented POM layers, which allowed the fiber to split into smaller filaments on bending. The high loop tenacity of the blend fibers is due to an increase in the radius of curvature resulting from the filament splitting on bending, because the shear stress at the bending corner becomes higher as the radius of curvature increases. © 1997 John Wiley & Sons, Inc.     

Influence of hydrostatic pressure on water absorption of polyoxymethylene: experiment and molecular dynamics simulation

This work experimentally investigated the influence of hydrostatic pressure on the water absorption of polyoxymethylene, followed by analyzing its micro‐mechanism via molecular dynamics simulation. Tests results show that the polyoxymethylene water absorption decreases with the increase in hydrostatic pressure when the latter is within 0–3.0 MPa; it subsequently increases with the increase in hydrostatic pressure in the range of 3.0–5.0 MPa. Simulation of water molecules diffusion on polyoxymethylene surface shows that water molecules diffuse into polyoxymethylene surface during an equilibration run, and water molecule displacement value of maximum relative concentration gives almost the same characteristics: firstly decreases and then increases with the increase of hydrostatic pressure. Simulation of water molecule diffusion inside polyoxymethylene suggests the following: (i) water molecules vibrate from the interior to the edge of polyoxymethylene cell during the equilibration run, and (ii) water diffusion coefficient in polyoxymethylene gives trend of firstly decreasing and then increasing with the increase of hydrostatic pressure. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of siloxane‐containing benzoxazine and its synergistic effect on flame retardancy of polyoxymethylene

A type of trialkoxysilane‐containing naphtholoxazine compound (Naph‐boz) was successfully synthesized and combined with ammonium polyphosphate/melamine (APP/ME) as an intumescent flame retardant (IFR) to improve the flame‐retardant efficiency of polyoxymethylene (POM). The Underwriters Laboratories 94 (UL94) vertical burning test, limiting oxygen index (LOI), cone calorimeter, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Raman spectral analysis were used to study the flame‐retardant properties and related mechanism. The results showed that the formulation with 20 wt.% of APP, 6 wt.% of ME, and 4 wt.% of Naph‐boz passed UL94 V‐1 rating, and the LOI value was improved to 40.3%. Compared with pure POM, the IFR with Naph‐boz had greater reduction in peak heat release rate (lower 74.9%) and total heat release (lower 40.2%). SEM images showed that compact and reinforcing charred layer was formed during the POM/IFR/4Naph‐boz samples combustion, which was beneficial at reducing and maintaining low combustion parameters throughout the cone calorimeter test. The synergistic flame‐retardant effect between Naph‐boz and APP/ME was considered as the reason for the improvement in flame retardancy POM. Furthermore, because of the Naph‐boz was conducive to the compatibility between the flame retardants and matrix, the notched Izod impact strength of POM/IFR/4Naph‐boz composite was higher than that of POM/IFR system.     

Relationship between fine structure of polyoxymethylene copolymer plates and methanol transport properties

An experimental study was made of diffusion behavior of methanol through three kinds of injection‐molded plates of a polyoxymethylene (POM) copolymer with different molecular weights M at 60 °C. Fine structure of the three sample plates was also examined by wide‐angle X‐ray diffraction and small‐angle X‐ray scattering, and moreover, their dynamic properties were investigated by the dynamic mechanical analysis (DMA). It is shown that the diffusion behavior may be well explained by the one‐dimensional Fick diffusion equation with a constant diffusion coefficient, and that the steady‐state transport rate increases with increasing M. As for fine structure, the crystallinity decreases slightly, and the preferential orientation and the long period increase, with increasing M. The long period of the lamellar stacking structure increases with increasing M, and it also increases with methanol transport. In DMA, the loss tangent tan δ becomes higher after the methanol transport in the wide range of temperature around the glass transition one. These results indicate that amorphous regions serve as channels for methanol molecules in the lamellar stacking structure, leading to the conclusion that the dependence of the steady‐state transport rate on M arises from the factors of crystallinity and long period. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1234–1242, 2007     

Synthesis of ethylidene diacetate from dimethyl ether, CO and H2

Ethylidene diacetate was prepared by reacting dimethyl ether, acetic acid and syngas in the presence of a catalytic system comprising RhI3, PPh3 and CH3I. The effects of reaction temperature, pressure, time and the CO/H2 molar ratio on the conversion of dimethyl ether and the product selectivity were investigated under the same catalyst formulation. Results showed that a maximum conversion of dimethyl ether was obtained when a mixture consisting of 0.3 mol dimethyl ether and 120 ml acetic acid was reacted at 180 ℃ and 3.0 MPa for 10 h at a stirring speed of 600 rpm under a syngas flow with a CO/H2 molar ratio of 2.5, which was catalyzed by a catalyst mixture comprising 0.3 g RhI3, 6 g PPh3 and 1.3 g CH3I. The selectivity of ethylidene diacetate increased with temperature, decreased with the CO/H2 molar ratio and exhibited a maximum with pressure.     

Microgels and ionic associations in solutions of cellulose diacetate

Solutions of cellulose diacetate (CDA) from two sources (cotton linters and wood pulp Floranier) were analysed in various solvents by size exclusion chromatography (SEC). Without special precautions, the SEC chromatograms presented three peaks — or prehumps — before the main polymer peak. The first prehump which could be eliminated by ultracentrifugation corresponded to microgels whose sugar composition was determined. These microgels were also investigated by electron microscopy, X-ray and electron diffraction analysis. They corresponded mainly to cellulose triacetate (CTA-II) in the case of CDA from cotton linters and a mixture of CTA-II and xylan diacetate (XDA) in the case of CDA from the wood pulp Floranier. The second and third prehumps could be attributed to ionic effects corresponding to the association of remaining sulfate groups on the CDA molecules with residual calcium. It was found that these ionic effects could be eliminated by the addition of LiBr or LiCl to the elution solvents. This led to chromatograms devoid of prehumps.Presented in part at the Cellulose '91 meeting in New Orleans.     

Investigation of surface and thermogravimetric characteristics of carbon-coated iron nanopowder

Demand for high-density press and sinter components is increasing day by day. Of the different ways to improve the sinter density, the addition of nanopowder to the conventional micrometer-sized metal powder is an effective solution. The present investigation is aimed at studying the surface chemistry of iron nanopowder coated with graphitic carbon, which is intended to be mixed with the conventional iron powder. For this purpose, iron nanopowder in the size range of 30 nm to submicron (less than 1 micron) was investigated using thermogravimetry at different temperatures: 400°C, 600°C, 800°C, 1000°C, and 1350°C. The X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), and high-resolution scanning electron microscopy (HR-SEM) were used for characterizing the powder as well as samples sintered at different temperatures. The presence of iron, oxygen, carbon, chromium, and zinc were observed on the surface of the nanopowder. Iron was present in oxide state, although a small metallic iron peak at 707 eV was also observed in the XPS spectra obtained from the surface indicating the oxide scale to be maximum of about 5 nm in thickness. For the sample treated at 600°C, presence of manganese was observed on the surface. Thermogravimetry results showed a two-step mass loss with a total mass loss of 4 wt.% when heated to 1350°C where the first step corresponds to the surface oxide reduction.     

恒温过程的热量传递

目前,基于物化教材上对"恒温过程"和"热"的定义,初学者在理解恒温过程的热量传递时往往会产生很大困惑。对概念的孤立和片面理解是造成该结果的根本原因。本文借助数学上的极限思想,以理想气体的恒温可逆膨胀过程为例,对该过程的能量传递做出详细剖析,以消除物理化学初学者在入门期的学习障碍。     

Arylation of aliphatic alcohols with tri-p-tolylbismuth and tri-p-tolylbismuth diacetate in the presence of a copper salt

Tri-p-tolylbismuth diacetate in the presence of a catalytic amount of a copper(II) salt (10.02, mol/mol) and tri-p-tolylbismuth in the presence of copper diacetate (1 2) replace the hydrogen atom of the hydroxyl groups of methanol and butanol with a tolyl group at 80 °C in up to 90 % yields.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 156–158, January, 1995.