Unexpected structural analogy between early and late 3d transition metal alkoxide carboxylates: Synthesis and single crystal X-ray study of Ni6(OH)2(OR)6(OCOR)2, R = C2H4NMe2, R = H, CH3

Modification of the liquid Ni(OR^N)₂, R^N = C₂H₄NMe₂, with stoichiometric or sub-stoichiometric amounts of carboxylic acids, HCOOH or CH₃COOH, results in formation of crystalline heteroleptic complexes Ni₆(OH)₂(OR^N)₆(OCOR)₂, R = H (1), CH₃ (3) with the core structure closely analogous to that observed earlier for hexanuclear titanium (IV) alkoxide carboxylates and derived from hexagonal packing of the donor atoms.     

Preparation, structures, and haptotropic rearrangement of novel dinuclear ruthenium complexes, (μ2,η:η-guaiazulene)Ru2(CO)4(CNR)

Novel isonitrile derivatives of a diruthenium carbonyl complex, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₅ (2), were synthesized by substitution of a CO ligand by an isonitrile, and were subjected to studies on thermal and photochemical haptotropic interconversion. Treatment of 2 (a 45:55 mixture of two haptotropic isomers, 2-A and 2-B) with RNC at room temperature resulted in coordination of RNC and alternation of the coordination mode of the guaiazulene ligand to form (μ₂,η¹:η⁵-guaiazulene)Ru₂(CO)₅(CNR), 5d–5f, [5d; R=^tBu, 5e; 2,4,6-Me₃C₆H₂, or 5f; 2,6-ⁱPr₂C₆H₃] in moderate to good yields. Thermal dissociation of a CO ligand from 5 at 60 °C resulted in quantitative formation of a desirable isonitrile analogue of 2, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₄(CNR), 4d–4f, [4d; R=^tBu, 4e; 2,4,6-Me₃C₆H₂, or 4f; 2,6-ⁱPr₂C₆H₃], as a 1:1 mixture of the two haptotropic isomers. A direct synthetic route from 2 to 4d–4f was alternatively discovered; treatment of 2 with one equivalent of RNC at 60 °C gave 4d–4f in moderate yields. All of the new compounds were characterized by spectroscopy, and structures of 5d (R=^tBu) and 4d-A (R=^tBu) were determined by crystallography. Thermal and photochemical interconversion between the two haptotropic isomers of 4d–4f revealed that the isomer ratios in the thermal equilibrium and in the photostatic state were in the range of 48:52–54:46.     

Synthesis and X-ray crystal structures of [Ph2PMe2][(η-C5H4Bu)2Li] and [(η-C5H4Bu)2Yb(Cl)CH2P(Me)Ph2]

The interaction of [(η⁵-C₅H₄Bu^t)₂YbCl · LiCl] with one equivalent of Li[(CH₂) (CH₂)PPh₂] in tetrahydrofuran gave [Ph₂PMe₂][(η⁵-C₅H₄Bu^t)₂Li] (1) and [(η⁵-C₅H₄Bu^t)₂Yb(Cl)CH₂P(Me)Ph₂] (2) in 10% and 30% yields, respectively. 1 could also be prepared in 70% yield from the reaction of [Ph₂PMe₂][CF₃SO₃] with two equivalents of (C₅H₄Bu^t)Li. Both compounds have been fully characterized by analytical, spectroscopic and X-ray diffraction methods. The solid state structure of 1 reveals a sandwich structure for the [(η⁵-C₅H₄Bu^t)₂Li]⁻ anion.     

Synthesis and characterisation of the methylene-inserted mixed-chalcogenide compounds Fe2(CO)6(μ-SeCH2Te) and Fe2(CO)6(μ-SCH2Te)

The methylene-bridged, mixed-chalogen compounds Fe₂(CO)₆(μ-SeCH₂Te) (1) and Fe₂(CO)₆(μ-SCH₂Te) (3) have been synthesised from the room temperature reaction of diazomethane with Fe₂(CO)₆(μ-SeTe) and Fe₂(CO)₆(μ-STe), respectively. Compounds 1 and 3 have been characterised by IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy. The structure of 1 has been elucidated by X-ray crystallography. The crystalsare monoclinic,space group P2₁/n, A = 6.695(2), B = 13.993(5), C = 14.007(4)Å, β = 103.03(2)°, V = 1278(7) ų, Z = 4, D_c = 2.599 g cm⁻³ and R = 0.030 (R_w = 0.047).     

Hydrothermal syntheses and crystal structures of bimetallic cluster complexes [{Cd(phen)2}2V4O12]·5H2O and [Ni(phen)3]2[V4O12]·17.5H2O

The hydrothermal reactions of vanadium oxide starting materials with divalent transition metal cations in the presence of nitrogen donor chelating ligands yield the bimetallic cluster complexes with the formulae [{Cd(phen₂)₂V₄O₁₂]·5H₂O (1) and [Ni(phen)₃]₂[V₄O₁₂]·17.5H₂O (2). Crystal data: C₄₈H₅₂Cd₂N₈O₂₂V₄ (1), triclinic. a=10.3366(10), b=11.320(3), c=13.268(3) Å, =103.888(17)°, β=92.256(15)°, γ=107.444(14)°, Z=1; C₇₂H₁₃₁N₁₂Ni₂O_29.5V₄ (2), triclinic. a=12.305(3), b=13.172(6), c=15.133(4), =79.05(3)°, β=76.09(2)°, γ=74.66(3)°, Z=1. Data were collected on a Siemens P4 four-circle diffractometer at 293 K in the range 1.59° <θ<26.02° and 2.01°<θ<25.01° using the ω-scan technique, respectively. The structure of 1 consists of a [V₄O₁₂]⁴⁻ cluster covalently attached to two {Cd(phen)₂}²⁺ fragments, in which the [V₄O₁₂]⁴⁻ cluster adopts a chair-like configuration. In the structure of 2, the [V₄O₁₂]⁴⁻ cluster is isolated. And the complex formed a layer structure via hydrogen bonds between the [V₄O₁₂]⁴⁻ unit and crystallization water molecules.     

Dinuclear transition metal compounds of a decadentate pyrazole-containing chelating ligand. X-ray crystal structure of Co2(tthd)(ClO4)4(H2O)2(MeOH)1.75

A potentially decadentate ligand, 1,1,4,7,10,10-hexakis(3,5-dimethyl-1-pyrazolylmethyl)-1,4,7,10-tetraazadecane (tthd), has been synthesized from the reaction of tri-ethylenetetramine with six equivalents of N-hydroxymethyl-3,5-dimethylpyrazole. The tthd ligand forms coordination compounds, M₂(tthd)(ClO₄)₄(H₂O)_x, when M is Co, Ni, Cu, Zn and Cd and x = 4–8; and M₂(tthd)(A)₂(ClO₄)₂(H₂O)_x when M is Co and Ni, A is NCS or Cl, and x = 4–8. The cobalt compound, Co₂(tthd)(ClO₄)₂(H₂O)₂(MeOH)_1.75, crystallizes in the triclinic space group P1, a = 1.959(2), b = 1.5657(3), c = 2.1244(3) nm, = 105.5(1), β = 96.9(1), γ = 112.1(1). Due to severe disorder of the anions the structure could only be refined to an R_w, value of 0.099. The ligand acts as a decadentate, dinucleating ligand. The cobalt ions are distorted octahedrally surrounded by five N-atoms of the tthd ligand and an O-atom of water occupying the sixth coordination place. The other perchlorate compounds have very similar structures, as can be concluded from spectroscopic data.

In the thiocyanate and chloride compounds the anions have replaced the coordinated water molecules, resulting in octahedral Ni compounds. With Co thiocyanate, however, tthd acts as an octadentate ligand, resulting only in five-coordinated compounds.     

A homodinuclear complex of manganese containing novel ligand, Mn2(CO)6(μ-H){μ-S(SC3H5)C=C(PPr3)S}

The title complex Mn₂(CO)₆(μ-H){μ-S(SC₃H₅)C=C(PPr₃ⁱ)S} was synthesized by allyation of the homobinuclear anion [Mn₂(CO)₆(μ-H){μ-S(SC₃H₅)C=C(PPr₃ⁱ)S}]⁻¹, and characterized by elemental analysis, IR, ¹H NMR and ³¹P NMR spectra. The molecular structure shows that it contains a novel fairly planar ligand S(S)C=C(PPr₃ⁱ)S, and the two Mn(CO)₃ fragments are symmetrically placed at both sides of the plane of the ligand.     

Syntheses and X-ray crystal structures of [Co(η-CO3)(NH3)4](NO3)·0.5H2O and [(NH3)3Co(μ-OH)2(μ-CO3)Co(NH3)3][NO3]2·H2O

[Co(η²-CO₃)(NH₃)₄](NO₃)·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O were prepared by prolonged aerial oxidation of a solution of Co(NO₃)₂·6H₂O and ammonium carbonate in aqueous ammonia. The formation of these side products highlights the richness of the chemistry of these systems and the possibility of by products if methods are not strictly adhered to. The X-ray crystal structures of [Co(η²-CO₃)(NH₃)₄][NO₃]·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O reveal a monomeric octahedral cobalt center with η²-bound CO₃²⁻ in the former, while the latter consists of a dimeric array where the two cobalt centers are bridged by two OH⁻ and one μ₂-CO₃²⁻ groups with three terminal NH₃ ligands for each Co center. In both complexes extensive hydrogen bonding interactions are evident.     

Soluble Ni alkoxides based on dimethylaminoisopropoxide ligands: molecular structure of [Li(PrOH)Ni (η-OR)2Cl]2 and of cis-NiCl2(ROH)2 (R = CHMeCH2NMe2)

Various routes to Ni^II aminoalkoxides have been investigated. A nickel isopropoxide derivative 1 was prepared by anodic dissolution of the metal in the presence of LiCl as electrolyte. Alcoholysis reactions of 1 with 1-dimethylamino-2-propanol afforded the homoleptic nickel(II) aminoalkoxide 2 together with a NiLi species 3. 2 was also obtained by metathesis reactions between sodium alkoxide and the nickel hexammine complex whereas the reaction between the latter and the aminoalcohol led to an halide solvate, cis-NiCl₂(η²-ROH)₂, 4. The various compounds were characterized by elemental analysis, FT-IR and UV-vis spectroscopies as well as by X-ray diffraction for 3 and 4. 3 corresponds to [Li(PrⁱOH)Ni(η²-OCHMeCH₂NMe₂)Cl]₂ and the overall structure can be seen as two [Ni(η²-OCHMeCH₂NMe₂)₂Cl]⁻ moieties assembled by Li(PrⁱOH)⁺. The lithium atom is 4-coordinate due to its interaction with the oxygen atoms of the aminoalkoxide ligands. Nickel is 5-coordinate with a distorted tetragonal pyramidal stereochemistry, one nitrogen being in the apical position. The metal displays a distorted octahedral surrounding for the NiCl₂ adduct 4. The bond distances vary in the order NiOR < NiN ≈ NiO(H)R < NiCl for 3 and 4. The various compounds (except 1) are soluble in organic media.     

Reactions of the cationic diruthenium carbonyl complex [Ru2(μ-dppm)2(CO)4(μ,η-O2CMe)] with bidentate ligands; intramolecularly assisted stereospecific synthesis via the second-sphere face-to-face π–π stacking interactions

The reactions of the diruthenium carbonyl complexes [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]X (X=BF₄⁻ (1a) or PF₆⁻ (1b)) with neutral or anionic bidentate ligands (L,L) afford a series of the diruthenium bridging carbonyl complexes [Ru₂(μ-dppm)₂(μ-CO)₂(η²-(L,L))₂]X_n ((L,L)=acetate (O₂CMe), 2,2′-bipyridine (bpy), acetylacetonate (acac), 8-quinolinolate (quin); n=0, 1, 2). Apparently with coordination of the bidentate ligands, the bound acetate ligand of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ either migrates within the same complex or into a different one, or is simply replaced. The reaction of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ (1) with 2,2′-bipyridine produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)₂] (2), [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-bpy)]⁺ (3), and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-bpy)₂]²⁺ (4). Alternatively compound 2 can be prepared from the reaction of 1a with MeCO₂H–Et₃N, while compound 4 can be obtained from the reaction of 3 with bpy. The reaction of 1b with acetylacetone–Et₃N produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-acac)] (5) and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-acac)₂] (6). Compound 2 can also react with acetylacetone–Et₃N to produce 6. Surprisingly [Ru₂(μ-dppm)₂(μ-CO)₂(η²-quin)₂] (7) was obtained stereospecifically as the only one product from the reaction of 1b with 8-quinolinol–Et₃N. The structure of 7 has been established by X-ray crystallography and found to adopt a cis geometry. Further, the stereospecific reaction is probably caused by the second-sphere π–π face-to-face stacking interactions between the phenyl rings of dppm and the electron-deficient six-membered ring moiety of the bound quinolinate (i.e. the N-included six-membered ring) in 7. The presence of such interactions is indeed supported by an observed charge-transfer band in a UV–vis spectrum.     

Synthesis and characterisation of Hf(thd)2X2 derivatives [X = N(SiMe3)2, OSiMe3 and OSiBuMe2] as precursors for MOCVD of hafnium silicate films

Hafnium β-diketonatochlorides HfCl₂(thd)₂ (1), HfCl(thd)₃ (2) as well as β-diketonato-silylamide and/or siloxide derivatives of 1 namely Hf(thd)₂[N(SiMe₃)₂]₂ (3), Hf(thd)₂(OSiMe₃)₂ (4) and Hf(thd)₂(OSi^tBuMe₂)₂ (5) (thd = 2,2,6,6-tetramethyl-3,5-heptanedionate) were synthesized and characterized by elemental analysis, FT-IR, ¹H NMR and TGA. 2 and 5 were also characterized by single-crystal X-ray diffraction. The siloxide ligands are in cis position for 5 and exert a strong trans effect. The new volatile compounds were tested as single-source precursors for the deposition of HfSi_xO_y films by pulsed liquid injection MOCVD on Si(1 0 0) and R plane sapphire. The as-deposited at 600–800 °C films were essentially amorphous, Hf-rich (Hf/Hf + Si = 0.7–0.85) and smooth.     

The tungsten-tungsten triple bond---18. Bridging and terminal allyl ligands in complexes of the formula W2(R)2(NMe2)4, where R = C3H5 and C4H7

The reaction between RMgCl (two equivalents) and 1,2-W₂Cl₂(NMe₂)₄ in hydrocarbon solvents affords the compounds W₂R₂(NMe₂)₄, where R = allyl and 1− and 2-methyl-allyl. In the solid state the molecular structure of W₂(C₃H₅)₂(NMe₂)₄ has C₂ symmetry with bridging allyl ligands and terminal W---NMe₂ ligands. The W---W distance 2.480(1) Å and the C---C distances, 1.47(1) Å, imply an extensive mixing of the allyl π-MOs with the WW π-MOs, and this is supported by an MO calculation on the molecule W₂(C₃H₅)₂(NH₂)₄ employing the method of Fenske and Hall. The most notable interaction is the ability of the (WW)⁶⁺ centre to donate to the allyl π^*-MO (π₃). This interaction is largely responsible for the long W---W distance, as well as the long C---C distances, in the allyl ligand. The structure of the 2-methyl-allyl derivative W₂(C₄H₇)₂(NMe₂)₄ in the solid state reveals a gauche-W₂C₂N₄ core with W---W = 2.286(1) Å and W---C = 2.18(1) Å, typical of WW and W---C triple and single bonds, respectively. In solution (toluene-d₈) ¹H and ¹³C NMR spectra over a temperature range −80°C to +60°C indicate that both anti- and gauche- W₂C₂N₄ rotamers are present for the 2-methyl-allyl derivative. In addition, there is a facile fluxional process that equilibrates both ends of the 2-methyl-allyl ligand on the NMR time-scale. This process leads to a coalescence at 100°C and is believed to take place via an η³-bound intermediate. The 1-methyl-allyl derivative also binds in an η¹ fashion in solution and temperature-dependent rotations about the W---N, W---C and C=C bonds are frozen out at low temperatures. The spectra of the allyl compound W₂(C₃H₅)₂(NMe₂)₄ revealed the presence of two isomers in solution—one of which can be readily reconciled with the presence of the bridging isomer found in the solid state while the other is proposed to be W₂(η³-C₃H₅)₂(NMe₂)₄. The compound W₂R₂(NMe₂)₄ where R = 2,4-dimethyl- pentadiene was similarly prepared and displayed dynamic NMR behaviour explainable in terms of facile η¹ = η³ interconversions.     

Synthesis and crystal structure of the novel trimanganese tetrathiolate incomplete cubane: [Mo(η-C5H5)2(H)CO][Mn3(CO)9(μ-SC6H5)4]

An unexpected trimanganese(I) tetrathiolate-bridged complex, [Mn₃(CO)₉(μ-SC₆H₅)₄]⁻, with an incomplete cubane structure, was obtained by thermal reaction of [Mn₂(CO)₁₀] with [Mo(η⁵-C₅H₅)₂(SC₆H₅)₂]. The structure, established by single-crystal X-ray diffraction studies, shows the cation, [Mo(η⁵-C₅H₅)₂(H)CO]⁺, directed towards the vacant site of the cubane structure. Possible routes by which the anion and the cation could be formed are discussed.     

Electrochemical studies on Mo2Cl4(PR3)4 compounds containing phosphines of varied basicity

The electrochemical behaviour of a series of Mo₂Cl₄(PR₃)₄ complexes (PR₃ = PMe₃, PEt₃, PPrⁿ₃,PBuⁿ₃, PH₂Ph, PMe₂Ph, PEt₂Ph, PHPh₂, PMePh₂, PEtPh₂, P(OMe)₃, P(OMe)Ph₂) has been examined by cyclic voltammetry in dichloromethane solution. The phosphines were chosen to provide a wide range of Lewis basicity/π acidity as reflected by Tolman's _co IR and Bodner's Δδ_co ¹³C NMR spectral parameters for Ni(CO)₃(PR₃). The Mo₂ compounds undergo either quasi-reversible or irreversible one-electron oxidations except for P(OMe)₃ and P(OMe)Ph₂ for which no clectroactivity was observed before the solvent limit. The anodic peak potentials, E_p,a, span a range of nearly 700 mV. The half-wave potentials, E_1/2,for the quasi-reversible couples and E_p,a for all were plotted against the IR and NMR values and against the δ → δ* transition energies for the Mo₂ species in dichloromethane and in the solid state. For the organometallic spectral parameters excellent linear correlations were obtained while with the electronic spectral data fair correlations resulted. These results indicate that the Mo₂Cl₄(PR₃)₄ complexes become more difficult to oxidize as the electron-withdrawing nature of the PR₃ substituents increases and the δ → δ* band energy decreases.     

Acetylen-Komplexe von Di(η-cyclopentadienyl)molybdän: Synthesen und Protonierung. Struktur von [Cp2MoH{η-C2(SiMe3)2}]PF6

Cp₂MoH₂ reacts with methyl acrylate in the presence of acetylenes (L = C₂H₂, C₂Me₂, HCC^tBu, HCCSiMe₃, C₂(SiMe₃)₂, HCCCH₂OMe, HCCCH₂NMe₂) to form acetylene complexes Cp₂Mo(L) 5. Protonation takes place with CF₃CO₂H at −80°C to give short-lived cations [Cp₂MoH(L)⁺ (8) (L = C₂Me₂, HCCSiMe₃, C₂(SiMe₃)₂). The structure of [Cp₂MoH{η²-C₂(SiMe₃)₂}]PF₆(9) was determined by an X-ray diffraction study.     

Attempts at stepwise reduction of the carbon-nitrogen triple bond of a nitrile at two metal centres: study of the reactivity of [(CO)(PPh3)2Re( (μ-NCHPh)Ru(PPh3) 2(PhCN)] towards tetrafluoroboric acid and dihydrogen

The reaction of [(CO)PPh₃)₂Re(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)] (2) with HBF₄-Me₂O generates [(CO)PPh₃)₂Re(μ- H)₂(μ,η¹,η²HNCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (3). Monitoring the reaction by NMR spectroscopy shows the intermediate formation of [(CO)(PPh₃)₂ HRe(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (4). Attempted reduction of the imine ligand by a nucleophile (H⁻ or CN⁻) failed, regenerating 2. Under dihydrogen at 50 atm, 3 is slowly transformed into [(CO)(PPh₃)₂HRe(μ-H)₃Ru(PPh₃)₂(PhCN)][BF₄] (5) with liberation of benzyl amine.     

A new homobimetallic arenediyl diplatinum(II) unit as building block for macromolecular synthesis. X-ray crystal structure of [C6H2{CH2NMe2}2-1,5-{PtCl(PPh3)}2-2,4]

Treatment of the diaminobenzene [C₆H₄{CH₂NMe₂}₂-1,3] (NCN-H, 1) with one or two equivalents of cis-PtCl₂(DMSO)₂ leads to exclusive formation of the doubly cycloplatinated species [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(DMSO)}₂-2,4] (3), which upon addition of triphenylphosphine yields the bisphosphine adduct [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(PPh₃)}₂-2,4] (4). The X-ray molecular structure of 4 revealed the presence of highly distorted square planar Pt(II) centers which is caused by close proximity of the two phosphine donor ligands. Complexes of type 3 can be regarded as suitable starting materials for the directional build-up of larger macromolecular structures.     

H2O2-based epoxidation of bridged cyclic alkenes with [P{Ti(O2)}2W10O38] in monophasic systems: active site and kinetics

The H₂O₂-based epoxidation of bridged cyclic alkenes in a monophasic system containing low concentrations (<2 mM) of [Bu₄ⁿN]₄[Pr₂ⁱNH₃]₂H[P{Ti(O₂)}₂W₁₀O₃₈]·H₂O (1) (with two η²-peroxotitanium sites in the anion) has been studied in search of the catalytically active species involved. ³¹P NMR spectra of 1, measured under a variety of conditions, revealed that the active species was not hydroperoxotitanium complex [P{Ti(OOH)}₂W₁₀O₃₈]⁷⁻or [P{Ti(OOH)}Ti(O₂)W₁₀O₃₈]⁷⁻. The reaction pathways for the alkene epoxidation are discussed to understand the kinetics (especially the initial [H₂O₂] dependence). It was concluded that the net catalytic reaction for the epoxidation occurred through the two-electron oxidation at the hydroperoxotitanium site in the catalyst.     

Synthesis, structure and hydrogenation catalytic activity of [Ru3(μ3,η-ampy)(μ,η:η-PhC=CHPh)(CO)6(PPh3) (Hampy = 2-amino-6-methylpyridine)

The compound [RU₃(μ₃,η²- -ampy)(μ₃η¹:η²-PhC=CHPh)(CO)₆(PPh₃)₂] (1) (ampy = 2-amino-6-methylpyridinate) has been prepared by reaction of [RU₃(η-H)(μ₃,η²- ampy) (μ,η¹:η²-PhC=CHPh)(CO)₇(PPh₃)] with triphenylphosphine at room temperature. However, the reaction of [RU₃(μ-H)(μ₃, η² -ampy)(CO)₇(PPh₃)₂] with diphenylacetylene requires a higher temperature (110°C) and does not give complex 1 but the phenyl derivative [RU₃(μ₃,η²-ampy)(μ,η ¹:η² -PhC=CHPh)(μ,-PPh₂)(Ph)(CO)₅(PPh₃)] (2). The thermolysis of complex 1 (110°C) also gives complex 2 quantitatively. Both 1 and 2 have been characterized by0 X-ray diffraction methods. Complex 1 is a catalyst precursor for the homogeneous hydrogenation of diphenylacetylene to a mixture of cis- and trans -stilbene under mild conditions (80°C, 1 atm. of H₂), although progressive deactivation of the catalytic species is observed. The dihydride [RU₃(μ-H)₂(μ ₃,η²-ampy)(μ,η¹:η²- PhC=CHPh)(CO)₅(PPh₃)₂] (3), which has been characterized spectroscopically, is an intermediate in the catalytic hydrogenation reaction.     

A convenient synthesis of Fe(CO)2(η-S2CNMe2)2 and Fe(η-S2CNMe2)2 from the monodentate dithiocarbamato derivative, [(η-C5H5)(CO)3W(η-SCSNMe2)] and Fe2(CO)9

A high yield synthesis of the carbonyl dithiocarbamato derivative Fe(CO)₂(η²-S₂CNMe₂)₂ and Fe(η²-S₂CNMe₂)₂ by photolysis with visible light of solutions containing Fe₂(CO)₉ or Fe₃(CO)₁₂ and [(η⁵-C₅H₅)(CO)₃W(η¹-SCSNMe₂)] is reported.