Determination of nitrite in tap waters based on fluorosurfactant-capped gold nanoparticles-enhanced chemiluminescence from carbonate and peroxynitrous acid

Fluorosurfactant (FSN)-capped gold nanoparticles (GNPs), which exhibit higher stability at a wider pH range and high ionic strength, were utilized for investigating the chemiluminescence (CL) effect on the reaction between high concentration carbonate (~0.3 M) and peroxynitrous acid. When the pH of the colloidal solution was 10.2 by dropwise addition of 0.05 M NaOH, FSN-capped GNPs offer an enhanced CL intensity. Based on the CL spectra, XPS spectra and the quenching effect of reactive oxygen species, a possible CL mechanism is proposed. The tolerance of FSN-capped GNPs towards salt concentrations (salt proofing effect) within a large pH range is an interesting feature, compared to the other previously reported work on nanoparticles CL systems. The CL intensity is proportional to the concentration of nitrite in the range from 0.1 to 100 μM. The detection limit (S/N = 3) is 0.036 μM and the relative standard deviation (RSD) for seven repeated measurements of 0.5 μM nitrite was 2.4%. This method has been successfully applied to determine nitrite in tap waters with recoveries of 97-106%.     

CdTe nanocrystals sensitized chemiluminescence and the analytical application

It was found that the mixing of CdTe semiconductor nanocrystals (NCs) with luminol in the presence of KMnO₄ can induce a great sensitized effect on chemiluminescence (CL) emission. When the concentration of luminol, KMnO₄ and NaOH were fixed at 1 μM, 1 μM and 0.05 M, respectively, the most excellent performance can be obtained for the CdTe NCs sensitized CL. By means of CL and photoluminescence spectra, we suppose the enhanced CL signals resulted from the accelerated luminol CL induced by the oxidized species of CdTe NCs. Based on the finding, using thioglycolic acid-capped CdTe NCs as label and immunoglobulin G (IgG) as a model analyte, a CL immunoassay protocol for IgG content detection was developed. The strong inhibition effect of phenol compounds on luminol-KMnO₄-CdTe NCs CL system was also observed. All these findings demonstrated the possibility of semiconductor nanocrystals induced chemiluminescence to be utilized for more practical applications.     

Determination of bisphenol A based on chemiluminescence from gold(III)-peroxymonocarbonate

Peroxymonocarbonate (HCO₄⁻) was produced by the online reaction of bicarbonate with hydrogen peroxide. A strong chemiluminescence (CL) was observed when HCO₄⁻ reacted with AuCl₄⁻ without any special CL reagent. When bisphenol A (BPA) was added to AuCl₄⁻-HCO₄⁻ CL system, the CL emission was inhibited significantly. This new CL system was developed as a flow-injection method for the determination of BPA. Under the optimum experimental conditions, the inhibited CL intensity was linearly related to the concentration of BPA from 0.3 to 80 μM (R = 0.9958). The detection limit of BPA was 0.08 μM. The relative standard deviation for 12 repeated measurements of 1.0 μM BPA was 2.9%. The interferences of some cationic ions can be removed by an online cation-exchange column. The applicability of the present CL system was demonstrated for the sensitive and selective determination of BPA in real samples (mineral water bottle, baby bottle, beverage bottle and polycarbonate container). Based on the CL spectrum, UV-visible adsorption spectra, and the quenching effect of reactive oxygen species scavengers, a possible CL mechanism was proposed.     

Strong enhancement of the chemiluminescence of the cerium(IV)-thiosulfate reaction by carbon dots,and its application to the sensitive determination of dopamine

We show that the very weak chemiluminescence (CL) of the Ce(IV)-thiosulfate system is enhanced by a factor of ~150 in the presence of fluorescent carbon dots (C-dots). The C-dots were prepared by a solvothermal method and characterized by fluorescence spectra and transmission electron microscopy. Possible mechanisms that lead to the effect were elucidated by recording fluorescence and CL spectra. It is found that dopamine at even nanomolar levels exerts a diminishing effect on the enhancement of CL. This was exploited to design a method for the determination of dopamine in the concentration range from 2.5 nM to 20 μM, with a limit of detection (at 3 s) of 1.0 nM. Dopamine was determined by this method in spiked human plasma samples with satisfactory results.

基于量子点增敏化学发光同时测定尿液中的亚硝酸盐和硝酸盐

采用铜镉柱还原硝酸盐,与CdTe量子点增敏过氧亚硝酸-碳酸钠体系的化学发光信号相结合,开发了快速在线同时分析亚硝酸盐和硝酸盐的新方法.对流动注射、化学发光等实验参数条件进行优化,在Na2CO3的浓度为0.2 M、H2O2的浓度为0.03 M、Na2EDTA的浓度为1×10-3 M、CdTe量子点粒径为2.84 nm的条件下,过氧亚硝酸-碳酸钠体系可以获得最优的化学发光信号.该方法检测亚硝酸盐的线性范围为0.3~75μM,检测限可达0.12μM,其相对标准偏差为1.9%;硝酸盐的线性范围为1.0~100μM,检测限可达0.26μM,其相对标准偏差为1.5%.此方法无需衍生和分离,可以实现同时、准确、快速和高选择性地检测人体尿液中亚硝酸盐和硝酸盐的含量,回收率分别为94%~105%和96.6%~110.4%.     

Determination of nitrite based on its quenching effect on anodic electrochemiluminescence of CdSe quantum dots

A novel method for electrochemiluminescent (ECL) detection of nitrite was proposed based on its quenching effect on anodic ECL emission of CdSe quantum dots (QDs). The ECL emission could be greatly enhanced by sulfite and dissolved oxygen in a neutral system and occurred at a relatively low potential in comparison with traditional anodic ECL emitter, leading to high sensitivity and good selectivity. The quenching mechanism followed an “electrochemical oxidation inhibition” process, which was completely different from those of some analytes on the ECL emission of QDs. The coincidence of photoluminescence and ECL spectra of the QDs indicated that the ECL emission resulted from the redox process of QDs core and the sulfite acted as a coreactant. The nitrite quenched ECL emission could be analyzed according to the treatment of Stern-Volmer equation with a linear range from 1 μM to 0.5 mM for detection of nitrite. This work presented a new efficient ECL methodology for quencher-related detection.     

Sensitized chemiluminescence of CdTe quantum-dots on Ce(IV)-sulfite and its analytical applications

Water-soluble CdTe quantum-dots (QDs) of different sizes capped with thioglycolic acid (TGA) were synthesized via a microwave-assisted method. It was found that CdTe QDs, as a kind of sensitizer, could enhance the chemiluminescence (CL) emission from the redox reaction of SO3(2-) with Ce(IV) in acidic medium. In combination with the flow injection technique, the effects of reactant concentrations, the sizes of CdTe QDs, some organic compounds, and several electron transfer proteins on the CL emission were investigated in detail. The sensitized CL displayed the size-dependent effect and increased along with increasing the QDs sizes. Organic compounds containing OH, NH2, or SH groups, and some electron transfer proteins such as cytochrome c, hemoglobin and myoglobin, which readily interact with CdTe QDs, were observed to inhibit the CL signal of the Ce(IV)-SO3(2-)-CdTe QDs system, which made it applicable for the determination of such compounds and proteins. The CL enhancement mechanism was also discussed briefly on the basis of the photoluminescence (PL) and CL spectra. This work is not only of importance for gaining a better understanding of the unique optical and physical chemistry properties of semiconductor nanocrystals but also of great potential to find applications in many fields such as luminescence devices, bioanalysis, and multicolor labeling probes.     

Chemiluminescence study of carbonate and peroxynitrous acid and its application to the direct determination of nitrite based on solid surface enhancement

Peroxynitrous acid (ONOOH) was produced by the on-line mixing of acidified hydrogen peroxide with nitrite in a flow system. A strong chemiluminescent (CL) emission was observed when ONOOH reacted with carbonate without any special CL reagents. When cotton was present in the CL cell, the CL emission was enhanced significantly. The method was developed to determine nitrite, which showed a key improvement that any CL reagents and sensitizers were not used, resulting in better selectivity. The applicability of the present CL system was demonstrated for the sensitive and selective determination of nitrite in natural water samples without any special pretreatment. Good agreements were obtained for the determination of nitrite in tap and well waters between the present approach and a standard spectrophotometric method. The average precision was 4.6% (n=7) and detection limit (S/N=3) was 1.0×10⁻⁷ M. Based on the CL spectrum, UV spectra, and dissolved oxygen measurement, a possible CL mechanism was proposed. ONOOH was an unstable compound in acidic solution and could be quenched into peroxynitrite (ONOO⁻) in basic solution. ONOO⁻ reacted with CO₂ to produce ONOOCO₂⁻, which can rapidly decompose into NO₂ and CO₃⁻ radicals. In the presence of H⁺, CO₃⁻ radicals can protonate to bicarbonate radical (HCO₃). The recombination of HCO₃ radicals and decomposition can lead to light emission.     

Chemiluminescence of Luminol–Graphene Oxide for the Sensitive Detection of Puerarin in Biological Fluid and Chinese Gegen

Graphene oxide (GO ), one of the water‐soluble derivatives of graphene, could initiate strong chemiluminescence (CL ) emission of luminol in the absence of any oxidant, and then the CL intensity was inhibited by puerarin (PUE ), a main component in the traditional Chinese medicine Gegen. Based on this, a novel CL method was established for the determination of PUE . This method showed a linear relationship between the CL signal and the logarithm of PUE concentration in the range 0.01–6.00 μM . The limit of detection was 2.83 nM and the relative standard deviation (RSD ) was 1.94% for 11 determinations of 0.4 μM PUE . This method was successfully used for the determination of PUE in Gegen and human urine samples. The possible CL reaction mechanism was investigated by UV –vis, fluorescence, and CL spectra, as well as by some chemical experiments.     

Size dependent active effect of CdTe quantum dots on pyrogallol-H2O2 chemiluminescence system for chromium(III) detection

Water-soluble CdTe quantum-dots (QDs) of different sizes and capped with mercaptosuccinic acid were prepared by the microwave irradiation method. The QDs can significantly enhance the chemiluminescence (CL) of the pyrogallol-H₂O₂ system. Those with a diameter of 3.8 nm produce the most intense CL. UV-vis, photoluminescence, and CL spectra were acquired in order to explore the effect. The results showed that the chromium(III) ion in the concentration range from 20 pM to 30 µM enhances CL, and this is exploited for its trace determination.The limit of detection (3σ) is 6 pM, with a relative standard deviation (n?=?11) of 1.7%. A continuous flow injection CL method was developed and applied to the determination of chromium(III) in tap water and lake water samples with satisfactory results.     

Chemiluminescence of CdTe nanocrystals induced by direct chemical oxidation and its size-dependent and surfactant-sensitized effect

CdTe nanocrystals (NCs) capped with thioglycolic acid (TGA) were synthesized via a microwave-assisted method. The chemiluminescence (CL) of CdTe NCs induced by directly chemical oxidation and its size-depended and surfactant-sensitized effect in aqueous solution were then investigated. It was found that oxidants, especially hydrogen peroxide and potassium permanganate, could directly oxidize CdTe NCs to produce strong CL emission in basic conditions. The oxidized CL of CdTe NCs displayed size-dependent effect and its intensity increased along with increasing the sizes of the NCs. Moreover, the CL intensity could, if surfactants CTAB or beta-cyclodextrin were added to the above CL system, be sensitized to some degree. The sensitized CL induced by CTAB and beta-cyclodextrin is mainly contributing to the formation of aggregate nanostructure and the micellar micronanoenvironment, respectively. The possible oxidized CL mechanisms were further examined by means of photoluminescence spectra, CL spectra, and transmission electron microscopy studies. The CL properties of CdTe NCs not only will be helpful to study physical chemistry properties of semiconductor nanocrystals but also are expected to find use in many fields such as luminescence devices, bioanalysis, and multicolor labeling probes.     

Determination of tin in marine sediments by slurry sampling atomic absorption spectrometry with electrothermal atomization using a permanent modifier

A molecularly imprinted polymer (MIP) was synthesized by the precipitation polymerization method using triazophos (TAP) as the template. The MIP can selectively absorb TAP from sample solutions. The absorbed TAP strongly enhances the chemiluminescence (CL) of luminol-H₂O₂. This was applied to design a method for the on-line enrichment and detection of TAP. The change in CL intensity is linearly proportional to the concentration of TAP in the range from 1.0 μM to ~4.0 nM, and the detection limit is 2.5 nM (at an S/N of 3σ). This is about one order of magnitude lower than that of the conventional CL assay. The method was successfully applied to the determination of TAP in vegetable samples.     

A sensitive chemiluminescence method for the determination of cysteine based on silver nanoclusters

We have developed a sensitive chemiluminescent (CL) assay for cysteine. It is based on the use of water-soluble and fluorescent silver nanoclusters (Ag NCs) which are found to be able to strongly enhance the weak CL signal resulting from the redox reaction between Ce(IV) ion and sulfite ion. This enhancement is inhibited by cysteine under appropriate conditions. Taking advantage of this specific CL inhibition, a novel CL method for the sensitive and selective detection of cysteine was developed. This effect is interpreted in terms of an electronic energy transfer from excited state intermediate sulfur dioxide (originating from the CL reaction between Ce(IV) and sulfite ions) to the Ag-NCs. The latter become electronically excited and thus can act as a new source of emission. The method was applied to the determination of cysteine in the range from 5.0?nM to 1.0?μM, with a detection limit at 2.5?nM (S/N?=?3).

甲酸存在下 N-四氢苯并噻唑亚胺希夫碱的化学发光

新合成的N(2-四氢苯并噻唑)-2-羟基苯甲亚胺希夫碱与酸性高锰酸钾反应产生微弱的化学发光,甲酸的存在有显著的增敏作用。报道了其荧光光谱、化学发光光谱、紫外可见吸收光谱和化学发光动力学曲线,并建立了流动注射化学发光测定噻唑类希夫碱的方法。该法线性范围为1.0×10-7～8.0×10-5mol/L,检测限为5.0×10-8mol/L,对1.0×10-6mol/L噻唑类希夫碱11次平行测定的相对标准偏差为1.7％。     

Detection of trace nitrite in waters using a QDs-based chemiluminescence analysis system

In the present work, a novel flow-injection chemiluminescence method based on CdTe quantum dots (QDs) was developed for the determination of nitrite. Weak chemiluminescence (CL) signals were observed from a CdTe QDs–H₂O₂ system under basic conditions. The addition of a trace amount of hemoglobin (Hb) caused the CL from the CdTe QDs–H₂O₂ system to increase substantially. In the presence of nitrite, the ferrous Hb reacted with the nitrate to form ferric Hb and NO. The NO then bound to ferrous Hb to generate iron nitrosyl Hb. As a result, the CL signal from the CdTe QDs–H₂O₂–Hb system was quenched. Thus, a flow-injection CL analytical system for the determination of trace nitrite was established. Under optimum conditions, there was a good linear relationship between CL intensity and the concentration of nitrite in the range 1.0?×?10^?9 to 8.0?×?10^?7 mol L^?1 (R ²?=?0.9957). The limit of detection for nitrite using this system was 3.0?×?10^?10 mol L^?1 (S/N?=?3). This method was successfully applied to detect nitrite in water samples.

Electrochemical determination of nitrite via covalent immobilization of a single-walled carbon nanotubes and single stranded deoxyribonucleic acid nanocomposite on a glassy carbon electrode

A novel method has been developed for determination of nitrite by modifying the surface of a glassy carbon electrode (GCE) using single-walled carbon nanotubes with covalently immobilized single-strand deoxyribonucleic acid. The modified electrodes were characterized by field emission scanning electron microscopy, X-ray photoelectron spectroscopy, and electrochemical techniques. The results demonstrate that the nanotube-DNA nanocomposite has been successfully immobilized on the surface of the GCE. The new electrode, under optimum conditions at room temperature, exhibits excellent electrocatalytic activity towards the oxidation of nitrite, with a significantly reduction of the overpotential. The linear range for the detection of nitrite is from 0.6 to 540 μM, with a sensitivity of 0.216 μA?μM^?1, and a detection limit as low as 0.15 μM. The electrode showed good reproducibility and high stability and was successfully used to analyze nitrite in water and sausage samples.     

Amperometric detection of nitrite and nitrate at tetraruthenated porphyrin-modified electrodes in a continuous-flow assembly

The modification of a glassy carbon surface by coating with an electrostatically assembled film of tetraruthenated cobalt porphyrin/(meso-tetra(4-sulphonatephenyl)porphyrinate zinc(II) yields an indicator electrode that allows the determination of nitrite to be performed with a limit of detection of 0.1 μM in a flow injection configuration. The dynamic range extends up to 1000 μM and the repeatability of the measurements was evaluated to be 1.5% with a throughput of 50 samples per hour. The efficiency of the bilayered film to mediate the electron transfer allows the determinations to be performed at a less positive potential (+0.75 V) with enhanced sensitivity. The coating also prevents the surface poisoning and its stability is maintained over several weeks. The same detector was used for determination of nitrate after reduction to nitrite in a reductor column containing copperised cadmium. This method was used for the determination of nitrate and nitrite in mineral water, saliva and cured meats, the results being in agreement with certified values and those obtained by using recommended procedures.     

Determination of Nicotinamide in Food and Human Fluid Samples by Capillary

A rapid and simple capillary electrophoresis (CE) coupled with chemiluminescence (CL) detection was proposed for analysis of nicotinamide. This method was based on the inhibitory effect of nicotinamide to CL reaction of luminol‐K₃Fe(CN)₆ in alkaline aqueous solution. Under the optimal conditions, nico‐tinamide can be assayed in the range of 0.01–10.0 μM with a limit of detection of 3.0 nM. The whole analysis process can be completed within 11 min. The relative standard deviations of the signal intensity and the migration time were 3.0% and 1.5% for a standard sample at 0.1 μM, respectively. The presented CE‐CL method was successfully applied to the determination of nicotinamide in yogurt, human urine and plasma samples.     

Capillary electrophoresis determination of nitrate and nitrite in high-salt perchlorate solutions for the UC dissolution study

The capillary electrophoresis method with direct UV detection is proposed for the determination of nitrite and nitrate in high-salt perchlorate solutions issued from uranium carbide dissolution. The isotachophoretic sample stacking was used to compensate for the perchlorate matrix interference. Simple electrolyte composed of 120 mM formiate buffer, pH 3.8 enabled the nitrate and nitrite determination in the presence of up to 1000-fold excess of perchlorate with 2 μM and 4 μM detection limits for nitrate and nitrite, respectively. The proposed method was applied to the determination of nitrate and nitrite in high-salt non-irradiated uranium carbide dissolution samples.     

Quantification of nitrite and nitrate in seawater by triethyloxonium tetrafluoroborate derivatization-headspace SPME GC-MS

Triethyloxonium tetrafluoroborate derivatization combined with direct headspace (HS) or SPME-gas chromatography-mass spectrometry (GC-MS) is proposed here for the simultaneous determination of nitrite and nitrate in seawater at micromolar level after conversion to their corresponding volatile ethyl-esters (EtO-NO and EtO-NO₂). Isotopically enriched nitrite [¹⁵N] and nitrate [¹⁵N] are employed as internal standards and for quantification purposes. HS-GC-MS provided instrumental detection limits of 0.07 μM NO₂⁻ and 2 μM NO₃⁻. Validation of the methodology was achieved by determination of nitrite and nitrate in MOOS-1 (Seawater Certified Reference Material for Nutrients, NRC Canada), yielding results in excellent agreement with certified values. All critical aspects connected with the potential inter-conversion between nitrite and nitrate (less than 10%) were evaluated and corrected for by the use of the isotopically enriched internal standard.