Forces between a Rigid Probe Particle and a Liquid Interface

The effect of disjoining pressure between a rigid spherical probe particle (attached to an AFM cantilever) and a liquid interface (e.g., oil/water or air/water) is treated in an analytic manner to describe the total force F exerted on the probe as a function of the distance X of the probe from the rigid substrate (AFM stage) on which the liquid interface resides. Two cases (i) a flat interface under gravity and (ii) a drop whose size is sufficiently small that gravity can be neglected have been examined. A simple numerical algorithm is given for computing F(X) (the AFM observable) from a given form for the disjoining pressure. Numerical results are displayed for electrostatic probe/interface interactions which reveal the linear compliance regime experimentally observed in AFM experiments on these systems. The slope of the linear compliance regime is shown to be a function of the properties of the interface (capillary length, particle radius, drop size, contact angle of drop on rigid substrate etc.). Copyright 2001 Academic Press.     

毛细管电泳法表征离子液体与蛋白质的相互作用

基于毛细管区带电泳考察了不同离子液体的阳离子母核、烷基侧链碳原子数目和阴离子组成对牛血清白蛋白的影响,以及离子液体[C4mim]BF4与肌红蛋白、牛血清白蛋白、血红蛋白、牛凝血酶和转铁蛋白之间的相互作用。利用亲和毛细管电泳法比较了[C4mim]BF4与上述蛋白之间的相互作用,并计算得到结合常数Kb分别为1.24×107 L/mol,1.23×106 L/mol,5.75×104 L/mol和5.60×104 L/mol。结果表明,转铁蛋白、血红蛋白、肌红蛋白、牛血清白蛋白与离子液体的相互作用依次减弱,存在1～2个数量级的差异。结合毛细管区带电泳和亲和毛细管电泳模式可实现离子液体与多种蛋白质相互作用的定性与定量表征。     

Self-Assembly of Hexagonal Rod Arrays Based on Capillary Forces

A series of well-ordered, extended mesostructures has been generated from hexagonal polyurethane rods (15x3.2 mm) by self-assembly using capillary forces. The surface of one or more sides of the rods was rendered hydrophilic by exposure to an oxygen plasma. This modification determined the pattern of hydrophobic and hydrophilic faces; the hydrophobic sides were coated with a thin film of a hydrophobic lubricant. Agitation of the rods in an approximately isodense aqueous environment resulted in their self-assembly, in a process reflecting the action of capillary forces, into an array whose structure depends on the pattern of hydrophobic sides; capillarity also aligned the ends of the rods. We also carried out experiments in reaction chambers that restricted the motion of the rods; this restriction served to increase the size and regularity of the assemblies. Copyright 2000 Academic Press.     

Effect of Pulsed Ultrasonic Field on the Filling of a Capillary with a Liquid

The filling of capillaries with liquids of various viscosity in the ultrasonic field is experimentally investigated. It is shown that the breakage of the meniscus and the fast intense dissolution of the gas that filled the capillary occur at the threshold switching-on of the ultrasonic field in low-viscosity liquids. This causes the residual (after switching-off of the ultrasound) filling of the capillaries with a low-viscosity liquid. It is established that the residual filling of capillaries is observed only with the pressure amplitudes P _m exceeding some critical value; the residual filling increases with P _m and disappears as cavitation is induced below the capillary end. It is shown that pulsed regime is optimal for the ultrasonication.     

聚合物分散液晶从液体桥的组装

We report the organization of polymer-dispersed liquid crystals (PDLCs) into ordered concentric rings over large areas by drying a drop of bound PDLC toluene solution (i.e., confined between a spherical lens and an indium tin oxide (ITO)-coated glass substrate; sphere-on-ITOgeometry). The formation of regular ring-like deposits was a direct consequence of controlled "stick-slip" cycles of three-phase contact line during the course of solvent evaporation, which was effectively regulated through the use of the sphere-on-ITO geometry. This simple approach based on controlled evaporative organization may provide a new means of processing polymer/LC mixture to produce ordered surface patterns in one step, where microscopic LCs are dispersed within the polymer matrix.     

On the Role of Surface Forces in Contact Interaction between Elastic Sphere and Hard Surface

The works preformed earlier were reviewed briefly, and the new problem of the contact interaction between the elastic sphere and hard surface was formulated. The solution of a problem to the generalized surface force and its contact and noncontact components was obtained. The specific case of the obtained solution, when the separation = 0, was considered. The existence of two states of contact interaction between the elastic sphere and hard plane was revealed at = 0: (i) the stable state, at contact with the neck of radius a ₁= , where Ris the sphere radius, = (1 – )/(E), Eis the modulus of elasticity of the sphere, is its Poisson's coefficient, and () is the specific energy of adhesion of the surfaces at the lowest possible separation between these surfaces; and (ii) the unstable (metastable) state, at contact with radius a ₂= 0, i.e., at the point contact between the sphere and the plane. In this case, however, the stable contact with the neck at 0 when the modulus of elasticity E , i.e., at the interaction between the hard sphere and hard plane, is also degenerated into the point contact. It was shown that at the point contact, the contact component F _s ^"of the generalized surface force F _svanishes, whereas the noncontact component F _s ^"acquires the value F _s ^"= F _s= 2R() equal to the force of adhesion.     

pH对毛细管电泳分离多肽的影响

设计了一个针对高年级本科生的毛细管电泳分离实验,用以研究pH对生物小分子多肽分离的影响。5种多肽包括Bradykinin、[Hyp3]-bradykinin、Angiotensin I、Leucine Enkephalin和[Met5]-Enkaphalin,被用于毛细管电泳的分离实验。研究了毛细管电泳生物分析实验中最重要的2个因素即电渗流和样品吸附随pH的变化以及对于分离的影响。在pH=10的条件下,酸性多肽几乎没有吸附,少量的碱性多肽有吸附。在pH=6的条件下,碱性多肽具有非常强的吸附从而导致非常差的分离效果,在pH=2.3的条件下,5种多肽都能被很好地分离,由于多肽此时都带有正电荷因此几乎没有吸附。而在此pH,电渗流消失。对具有一定分析化学基础理论知识的学生而言,这是一个非常好的生物分析实验,有助于学生充分理解相关环境因素对仪器分析的重要影响。     

毛细管气相色谱法测定电热蚊香液中的丙炔菊酯

采用HP－1毛细管气相色谱法对电热蚊香液中丙炔菊酯的含量进行了定量分析，其测定结果的相对标准偏差为0．3％，回收率为103．05，具 有操作准确、简便，快速和实用等特点。     

Density Functional Theory and the Capillary Evaporation of a Liquid in a Slit

Density functional theory is applied to a Lennard-Jones fluid near a single hard wall and in a slit formed by two walls. We use some simplified versions of the Weeks-Chandler-Andersen (WCA) and the Barker-Henderson (BH) theories. Only the most crude mean field version of the WCA theory, in which the hard-sphere correlation function is set equal to unity for all distances, seems useful. Use of the full WCA approximation is impractical because the effective hard-sphere diameter is density dependent. Generally, the best results are obtained using the BH macroscopic compressibility approximation. Our earlier study of "evaporation" of Lennard-Jones molecules in a slit is extended to other densities using the mean field theory. Copyright 2000 Academic Press.     

Influence of Non-uniformity of Generation of Active Particles on Deposition Processes and Redox Reactions in a Glow Discharge in Contact with Water

Plasma Chemistry and Plasma Processing - The processes of formation of zinc hydroxide and the processes of oxidation–reduction of Cr6+ under action on water solutions of a direct current...     

微柱固相萃取-毛细管液相色谱在线联用技术

以填充毛细管柱作为固相萃取柱,通过定体积阀进样和阀切换技术与毛细管液相色谱在线联用。用65 mm×0.45 mm i.d.5μm C18毛细管填充柱作为萃取柱,以对甲氧基苯甲醛水标样考察了该系统性能。线性范围为0.01~0.5 mg/L;保留时间、峰高以及峰面积的相对标准偏差分别为1.4%~2.2%、4.2%~5.7%和6.0%~10.1%,标准曲线回归系数(r)大于0.998。与直接进样相比,所用方法使检出限降低3个数量级,浓度检出限为6.0 ng/L(S/N=3)。另外,对多环芳烃化合物的富集倍数在30~100倍。采用该方法在大连香炉礁海水中检测到了萘,通过向空白海水中加标样,确定海水中萘的检出限为0.128μg/L(S/N=3)。填充毛细管固相萃取柱的优点是柱性能重复可靠,商品填料种类丰富。     

Determination of Catecholamines by Capillary Electrophoresis and Reversed-Phase High-Performance Liquid Chromatography

A method is proposed for the electrophoretic determination of adrenaline, noradrenaline, and dopamine with mass-spectrometric or UV detection. A procedure is proposed for the sample preparation of biological fluids with the use of solid-phase extraction on alumina. A comparative assessment of the determination of catecholamines by capillary electrophoresis and reversed-phase high-performance liquid chromatography was performed.     

开管毛细管亲和液相色谱初探

 提出了一种新的亲和色谱模式开管毛细管亲和液相色谱。在内径为 5 0 μm的毛细管内表面键合一层三嗪染料配体 ,利用毛细管电泳仪的压力系统进行亲和色谱实验。采用流动相切换洗脱技术 ,牛血清白蛋白和溶菌酶获得了有效的分离。连续运行 10次 ,溶菌酶的出峰时间、峰面积和峰高的相对标准偏差分别为0 1% ,4 3% ,3 7%。在 8 6ng～ 2 8 7ng范围内 ,溶菌酶的进样量与峰面积和峰高都呈线性关系 ,其相关系数分别为 0 9946和 0 9988。     

用改进的涂敷法考察模板剂对分子筛毛细管色谱柱分离性能的影响

1　引　　言传统分子筛柱的制备以静态涂敷或以水、甲醇为悬浮液的动态涂敷为主 ,两种方法耗时耗力、成功率低、重复性均匀度差。与此相比 ,本文发展的以一缩二乙二醇为悬浮剂的改进涂敷法简便易行、重复性好、柱效高 ,极大地拓展了分子筛柱的应用范围。利用该涂敷法 ,本文制备了ＺＳＭ 5分子筛柱 ,重点考察了模板剂四丙基溴化胺 (ＴＰＡＢｒ)在ＺＳＭ 5分子筛毛细管柱色谱分离中的作用。2　实验部分2 .1　仪器与试剂　ＧＤＭ 1Ｂ玻璃毛细管柱拉制机 (日本岛津公司 ) ,1 0 0型超声波振荡器 (美国ＮＥＹ公司 ) ,ＭＣＴ 1Ａ玻璃毛细管动态涂敷…     

The Surface Energy and Contact Angles of a Liquid Foam

A liquid foam can be regarded as a single fluid with a characteristic "surface tension". This property is calculated for two- and three-dimensional ordered and disordered foams using a broken bond approach. The contact angle of a foam with a solid or a liquid substrate is also calculated from the energies of the bubbles in contact with the substrate. Experiments were carried out in which the contact angles of foams were measured, with reasonable agreement with the predictions. Copyright 2001 Academic Press.     

Preparation of Polystyrene Particles by Dispersion Polymerization in an Ionic Liquid

Submicron‐sized monodisperse polystyrene (PS) particles were successfully prepared by dispersion polymerization of styrene in an ionic liquid, N,N‐diethyl‐N‐methyl‐N‐(2‐methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide ([DEME][TFSI]) at 70 °C with poly(vinyl pyrrolidone) (PVP) as a stabilizer. At the optimum PVP and styrene concentrations with regard to preparation of stable polymer particles, the number‐average diameter and coefficient of variation were 350 nm and 5.7%, respectively. The particle size increased with a decrease in the PVP concentration and an increase in the styrene concentration. Moreover, we succeeded in producing PS particles by thermal polymerization in the absence of a radical initiator at 130 °C in [DEME][TFSI] using a conventional reactor (not autoclave) utilizing the advantages of non‐volatility and thermal stability of the ionic liquid.

     

填充毛细管液相色谱-高温毛细管气相色谱在线联用分析重油

重油的组成分析一直是个难题,它的沸点高,族组分种类多,各族内组分的异构体又极为繁多.最好的分析方法是用高效液相色谱(HPLC)做族分离,馏分收集后再用CGC分析.但HPLC的族馏分体积比CGC进样量大100倍.本文采用填充毛细管液相色谱(μHPLC)与高温毛细管气相色谱(HTGC)在线联用技术[1]分析重油.正相μHPLC将样品按族分离,μHPLC的柱效高,族分离能力强,而小的馏分体积(<100μL)可避免GC分流进样.在一次LC进样后,多位储存型联用接口将分离后的各族组分切割、存储并分别无损失转入HTGC分析,利用FID对高于C10的有机物的响应值相…