Fabrication of organic–inorganic nano-complexes using ABC type triblock copolymer and polyoxotungstates

New organic–inorganic nano-complexes were produced from a micelle of tri-block polymers; poly(styrene)-b-poly(2-vinylpyridine)- b-poly (ethylene oxide) (PS-PVP-PEO) and tungsten compounds such as tungstate (W₁²⁻), undecatungstophospate (PW₁₁⁷⁻) and undecatungstosilicate (SiW₁₁⁸⁻) in acidic aqueous solutions. The size and morphology of the complexes were characterized by measurements of dynamic light scattering, atomic force microscopy, and scanning electron microscopy. This complex is assembled mainly by the charge interaction between the inorganic polyanions and the positively charged PVP block in the PS-PVP-PEO molecule, which was confirmed by zeta-potential and fluorescence spectroscopic studies. In the absence of the inorganic anions, the zeta-potential of the micelle was +11 mV at pH 3 due to the positive charge of the PVP block. When the inorganic anion was mixed with the PS-PVP-PEO micelle, decrease in the zeta-potential due to charge neutralization occurred with incorporation of inorganic anions into the PS-PVP-PEO micelle. The minimum zeta-potential was 0, −33, and −35 mV for W₁²⁻ /PS-PVP-PEO, PW₁₁⁷⁻ /PS-PVP-PEO, and SiW₁₁⁸⁻ /PS-PVP-PEO complexes, respectively. Excess negative charge which occurred in the latter two complexes indicates that PS-PVP-PEO molecules bound PW₁₁⁷⁻ and SiW₁₁⁸⁻ by forces other than charge interaction. In addition, the incorporation of an inorganic polyanion into the micelle gave a new morphology to the micelle. In the absence of the polyanion, the PS-PVP-PEO micelles showed an extended conformation due to repulsive forces working among the positively charged PVP blocks. Addition of the polyanion caused the formation of shrunken forms of the micelles, since the charge repulsion was cancelled by the polyanion. This feature may be useful in developing a new type of functioning micelle.     

Mixed self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers and sodium dodecyl sulfate in aqueous solution

Interaction of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers with anionic sodium dodecyl sulfate (SDS) has been investigated in aqueous solution. Formation of mixed micelles has been confirmed by surface tension measurements, whereas the influence of the surfactant on the copolymer self-assembling has been studied by measurement of the 1H NMR self-diffusion coefficients and by small-angle neutron scattering. As a rule, the surfactant decreases the heterogeneity of the micellar structures formed by the copolymer in water. Moreover, increasing the content of SDS results in the increasingly more important extension of the poly(ethylene oxide) (PEO) corona chains and the copolymer micelle deaggregation. The stability of the micelles against SDS increases with the length of the hydrophobic block. Preliminary two-dimensional NMR measurements with nuclear Overhauser enhancement have confirmed the spatial vicinity between SDS and the constitutive blocks of the copolymer.     

Interaction between sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP) investigated with forward and reverse component addition protocols employing tensiometric, conductometric, microcalorimetric, electrokinetic, and DLS techniques

The interaction between polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS) after the procedure of addition of the surfactant to polymer and the reverse procedure of addition of polymer to SDS micelles has been studied by tensiometric, conductometric, and microcalorimetric methods. The results have been analyzed and correlated with reference to SDS interfacial adsorption, association, and binding to PVP. Two aggregation states of SDS in presence of PVP have been found. The enthalpies of formation of SDS aggregates/micelles and their binding to the polymer have been evaluated. The interaction of PVP with SDS at concentrations below its critical micellar concentration (CMC) and above have evidenced distinctions. The forward addition protocol (FAP, SDS addition to PVP) and reverse addition protocol (RAP, PVP addition to SDS) have shown similarities and differences. Electrokinetic measurements have evidenced the interacted (SDS–PVP) colloidal products to possess negative zeta potential in the range of −39 to −65 mV. The hydrodynamic diameters of the PVP–SDS dispersion obtained from DLS measurements have ranged between 60 and 160 nm. Both zeta potential and hydrodynamic diameter have depended on [SDS] showing a maximum for the former at twice the critical micellar concentration of SDS.     

Micelles of poly(styrene-b-2-vinylpyridine-b-ethylene oxide) with blended polystyrene core and their application to the synthesis of hollow silica nanospheres

Core-shell-corona (CSC) micelles of asymmetric triblock copolymer, poly(styrene-b-2-vinylpyridine-b-ethylene oxide) (PS-PVP-PEO), containing polystyrene homopolymer (homo-PS) in the core were successfully prepared in aqueous media. The influence of homo-PS contents over the formation of the micelles was investigated thoroughly by various techniques such as dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and fluorescence spectroscopy. It was found that the size of the PS core of the micelle was increased by the addition of homo-PS as observed by DLS and TEM techniques. The SEM and TEM measurements confirm the spherical morphology of the micelles and enlargement of PS core over the addition of homo-PS. The increase in the PS core volume of the PS-PVP-PEO micelles is attributed to the insertion of homo-PS in the PS core. The micelles have also been demonstrated as facile soft templates for synthesis of hollow silica nanospheres. The average diameter of the spherical hollow particles could be tuned between 30.6 and 38.8 nm with cavity sizes ranging from 20.7 to 28.5 nm using tetramethoxysilane as silica precursors under mild acidic conditions. The facile synthesis of hollow silica using the CSC micelles with different homo-PS contents indicates that the hollow void size can be controlled within a range of several nanometers.     

The Hybrids of Polystyrene-block-Poly(ethylene Oxide) Micelles and Sodium Dodecyl Sulfate in Aqueous Solutions: Interaction with Rh Ions and Rh Nanoparticle Formation

The interaction of amphiphilic block copolymer, polystyrene-block-poly(ethylene oxide) (PS-b-PEO), with anionic surfactant, sodium dodecyl sulfate (SDS), in aqueous media has been studied by sedimentation in ultracentrifuge. Three well-defined populations of hybrid aggregates corresponding to micelles, micellar clusters, and supermicellar aggregates were detected in the PS-b-PEO/SDS aqueous solutions at various rotation rates. Parameters of all the micellar aggregates were characterized depending on the SDS loading. An increase in the SDS loading was found to result in an increase in block copolymer/surfactant micelle size and weight at the SDS concentration of 0.8x10(-3) mol/L and in a slight decrease of both parameters at critical micelle concentration and at higher concentration. This decrease was caused by incorporation of SDS molecules in block copolymer micelles followed by charging the PS core and repulsion between similar charges. Using dichlorotetrapyridine rhodium(III)chloride hexahydrate ([Rh(Py)(4)Cl(2)]Clx6H(2)O), ion exchange of surfactant counterions in the hybrid PS-b-PEO/SDS system for Rh cations was carried out, which allowed saturating the micellar structures with Rh species. Subsequent reduction of the Rh-containing hybrid solutions with NaBH(4) resulted in the formation of Rh nanoparticles with a diameter of 2-3 nm mainly located in the block copolymer micellar aggregates. Copyright 2000 Academic Press.     

Poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-g-poly(vinyl pyrrolidone): synthesis and characterization

Pluronic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers are grafted with poly(vinyl pyrrolidone) by free radical polymerization of vinyl pyrrolidone with simultaneous chain transfer to the Pluronic in dioxane. This modified polymer has both thermal responsiveness and remarkable capacity to interact with a wide variety of hydrophilic and hydrophobic pharmaceutical agents which is very attractive for medical applications. The chemical structure of the graft copolymers was characterized by FTIR and 1H NMR spectroscopy. Polymerization conditions such as initiators, feed ratio, and reaction times are studied to obtain the ideal graft copolymer.     

Synthesis and self-assembly behavior of four-arm poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate) star block copolymer in salt solutions

A well-defined block copolymer consisting of four-arm poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate) (four-arm PEO56-b-PDEAEMA74) was synthesized by atom transfer radical polymerization. The pH-responsive self-assembly behavior was examined by potentiometric titration, surface tensiometry, laser light scattering, and transmission electron microscopy over the course of dissociation by the addition of a base or acid. The apparent hydrodynamic radius (Rh) of the micelle increased from 21 to 56 nm when the degree of protonation of the amine groups was increased from 0 to 0.5 in 0.01 M NaCl solution. In higher concentration NaCl solution, the micelle shrank due to the electrostatic charge screening of the protonated DEAEMA groups. At low pH, the micelles dissociated into unimers.     

Concomitant adsorption of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers and sodium dodecyl sulfate at the silica-water interface

Upon addition of silica to aqueous solutions of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers (PEO-b-PCL) and sodium dodecyl sulfate (SDS), adsorption of the solutes occurs at the silica-water interface. The amount of the adsorbed constituents has been measured by the total concentration depletion method. Small-angle neutron scattering experiments (SANS) have been carried out to investigate the structure of the adsorbed layer. Although SDS is not spontaneously adsorbed onto hydrophilic silica, adsorption is observed in the presence of PEO-b-PCL diblocks, in relation to the relative concentration of the two compounds. Conversely, SDS has a depressive effect on the adsorption of the copolymer, whose structure at the interface is modified. Copolymer desorption is however never complete at high SDS content. These observations have been rationalized by the associative behavior of PEO-b-PCL and SDS in water.     

Effect of ethanol on the interaction between poly(vinylpyrrolidone) and sodium dodecyl sulfate

The effect of ethanol on the interaction between the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic polymer poly(vinylpyrrolidone) (PVP) has been investigated using a range of techniques including surface tension, fluorescence, electron paramagnetic resonance (EPR), small-angle neutron scattering (SANS), and viscosity. Surface tension and fluorescence studies show that the critical micelle concentration (cmc) of the surfactant decreases to a minimum value around 15 wt % ethanol; that is, it follows the cosurfactant effect. However, in the presence of PVP, the onset of the interaction, denoted cmc(1), between the surfactant and the polymer is considerably less dependent on ethanol concentration. The saturation point, cmc(2), however, reflects the behavior of the cmc in that it decreases upon addition of ethanol. This results in a decrease in the amount of surfactant bound to the polymer [C(bound) = cmc(2) - cmc] at saturation. The viscosity of simple PVP solutions depends on ethanol concentration, but since SANS studies show that ethanol has no effect on the polymer conformation, the changes observed in the viscosity reflect the viscosity of the background solvent. There are significant increases in bulk viscosity when the surfactant is added, and these have been correlated with the polymer conformation extracted from an analysis of the SANS data and with the amount of polymer adsorbed at the micelle surface. Competition between ethanol and PVP to occupy the surfactant headgroup region exists; at low ethanol concentration, the PVP displaces the ethanol and the PVP/SDS complex resembles that formed in the absence of the ethanol. At higher ethanol contents, the polymer does not bind to the ethanol-rich micelle surface.     

Poly(ethylene glycol)-b-poly(epsilon-caprolactone) and PEG-phospholipid form stable mixed micelles in aqueous media

Novel mixed polymeric micelles formed from biocompatible polymers, poly(ethylene glycol)-b-poly(epsilon-caprolactone) (PEG(5000)-b-PCL(x)) and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-methoxy poly(ethylene glycol) (PEG-DSPE), possess small size and high thermodynamic stability, raising their potential as long circulating carriers in the context of delivery of antineoplastic and antibiotic drugs. Formation of mixed polymeric micelles was confirmed using size exclusion chromatography and 1H NMR NOESY. Steady-state fluorescence measurements revealed depressed critical micellar concentrations indicative of a cooperative interaction between component hydrophobic blocks, which was quantified using the pseudophase model for micellization. Steady-state fluorescence measurements indicated that the mixed polymeric micelle cores possess intermediate micropolarity and high microviscosity. Pulsed field gradient spin-echo measurements were used to characterize micellar diffusion coefficients, which agree well with those obtained using dynamic light scattering. NOE spectra suggested that the hydrophobic polymer segments from individual components are in close proximity, giving evidence for the formation of a relatively homogeneous core. Contrary to one-component PEG(5000)-b-PCL(x) micelles, the mixed polymeric micelles could incorporate clinically relevant levels of the poorly water soluble antibiotic, amphotericin B (AmB). AmB encapsulation and release studies revealed an interesting composition-dependent interaction of the drug with the mixed polymeric micelle core.     

Hybrid micelle formation from poly(ethylene oxide-b-sodium 2-acrylamido-1-propanesulfonate-b-styrene) and Fe3+ ion in aqueous solution

Organic–inorganic nanohybrid particles are prepared in aqueous solution from poly(ethylene oxide-b-sodium 2-acrylamido-1-propanesulfonate-b-styrene) (PEO-b-PAMPS-b-PS) triblock copolymer and ferric ions. The hybrid micelles were characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, and zeta-potential measurements. The hydrodynamic diameter of the hybrid micelles ranges from 68 to 118 nm depending on the concentration of the polymer and the amount of ferric ions loaded on the polymer. Zeta-potential measurements revealed that the micelles are assembled mainly by electrostatic interaction between the ferric ions and the negatively charged PAMPS block in the PEO-b-PAMPS-b-PS.     

Adsorption of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers at the silica-water interface

The adsorption of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) and poly(ethylene oxide)-b-poly(gamma-methyl-epsilon-caprolactone) copolymers in aqueous solution on silica and glass surfaces has been investigated by flow microcalorimetry, small-angle neutron scattering (SANS), surface forces, and complementary techniques. The studied copolymers consist of a poly(ethylene oxide) (PEO) block of M(n) = 5000 and a hydrophobic polyester block of poly(epsilon-caprolactone) (PCL) or poly(gamma-methyl-epsilon-caprolactone) (PMCL) of M(n) in the 950-2200 range. Compared to homoPEO, the adsorption of the copolymers is significantly increased by the connection of PEO to an aliphatic polyester block. According to calorimetric experiments, the copolymers interact with the surface mainly through the hydrophilic block. At low surface coverage, the PEO block interacts with the surface such that both PEO and PCL chains are exposed to the aqueous solution. At high surface coverage, a dense copolymer layer is observed with the PEO blocks oriented toward the solution. The structure of the copolymer layer has been analyzed by neutron scattering using the contrast matching technique and by tapping mode atomic force microscopy. The experimental observations agree with the coadsorption of micelles and free copolymer chains at the interface.     

Non-surface activity and micellization behavior of cationic amphiphilic block copolymer synthesized by reversible addition-fragmentation chain transfer process

Cationic amphiphilic diblock copolymers of poly(n-butylacrylate)-b-poly(3-(methacryloylamino)propyl)trimethylammonium chloride) (PBA-b-PMAPTAC) with various hydrophobic and hydrophilic chain lengths were synthesized by a reversible addition-fragmentation chain transfer (RAFT) process. Their molecular characteristics such as surface activity/nonactivity were investigated by surface tension measurements and foam formation observation. Their micelle formation behavior and micelle structure were investigated by fluorescence probe technique, static and dynamic light scattering (SLS and DLS), etc., as a function of hydrophilic and hydrophobic chain lengths. The block copolymers were found to be non-surface active because the surface tension of the aqueous solutions did not change with increasing polymer concentration. Critical micelle concentration (cmc) of the polymers could be determined by fluorescence and SLS measurements, which means that these polymers form micelles in bulk solution, although they were non-surface active. Above the cmc, the large blue shift of the emission maximum of N-phenyl-1-naphthylamine (NPN) probe and the low micropolarity value of the pyrene probe in polymer solution indicate the core of the micelle is nonpolar in nature. Also, the high value of the relative intensity of the NPN probe and the fluorescence anisotropy of the 1,6-diphenyl-1,3,5-hexatriene (DPH) probe indicated that the core of the micelle is highly viscous in nature. DLS was used to measure the average hydrodynamic radii and size distribution of the copolymer micelles. The copolymer with the longest PBA block had the poorest water solubility and consequently formed micelles with larger size while having a lower cmc. The "non-surface activity" was confirmed for cationic amphiphilic diblock copolymers in addition to anionic ones studied previously, indicating the universality of non-surface activity nature.     

Reversible aggregation of polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) block copolymer micelles in acidic aqueous Solutions

Micelles of polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) (PS-PVP-PEO) were studied in acidic aqueous solutions by static and dynamic light scattering, alkalimetric titration, fluorescence correlation spectroscopy, and after deposition on a mica surface by atomic force microscopy. The PS-PVP-PEO micelles prepared by dialysis in ternary 1,4-dioxane-methanol-acidic water mixtures have a very low association number and show a strong tendency to form aggregates. The aggregation, which is promoted at low pH, seems to be fully reversible. Possible mechanisms of the aggregation are discussed. Atomic force microscopy scans of PS-PVP-PEO micelles deposited on a mica surface reveal the formation of micellar aggregates and support the general concept of aggregation upon changes in conditions and deterioration of the stability of small micelles.     

Micellization of non-surface-active diblock copolymers in water. Special characteristics of poly(styrene)-block-poly(styrenesulfonate)

Strongly ionized amphiphilic diblock copolymers of poly(styrene)-b-poly(styrenesulfonate) with various hydrophilic and hydrophobic chain lengths were synthesized by living radical polymerization, and their properties and self-assembling behavior were systematically investigated by surface tension measurement, foam formation, hydrophobic dye solubilization, X-ray reflectivity, dynamic light scattering, small-angle neutron scattering, small-angle X-ray scattering, and atomic force microscope techniques. These copolymer solutions in pure water did not show a decrease of surface tension with increasing polymer concentration. The solutions also did not show foam formation, and no adsorption at the air/water interface was confirmed by reflectivity experiments. However, in 0.5 M NaCl aq solutions polymer adsorption and foam formation were observed. The critical micelle concentration (cmc) was observed by the dye solubilization experiment in both the solutions with and without added salt, and by dynamic light scattering we confirmed the existence of polymer micelles in solution, even though there was no adsorption of polymer molecules at the water surface in the solution without salt. By the small-angle scattering technique, we confirmed that the micelles have a well-defined core-shell structure and their sizes were 100-150 A depending on the hydrophobic and hydrophilic chain length ratio. The micelle size and shape were unaffected by addition of up to 0.5 M salt. The absence of polymer adsorption at the water surface with micelle formation in a bulk solution, which is now known as a universal characteristic for strongly ionized amphiphilic block copolymers, was attributed to the image charge effect at the air/water interface due to the many charges on the hydrophilic segment.     

Surfactant--polymer aggregates formed by sodium dodecyl sulfate, poly(N-vinyl-2-pyrrolidone), and poly(ethylene glycol)

The interaction of sodium dodecyl sulfate (SDS) in aqueous solution with poly(N-vinyl-2-pyrrolidone) (M(w) = 55,000 g/mol) in the presence of poly(ethylene glycol) (M(w) = 8000 g/mol) is investigated by electrical conductivity, zeta potential measurements, viscosity measurements, fluorescence spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate that SDS-polymer interaction occurs at low surfactant concentration, and its critical aggregation concentration is fairly dependent on polymer composition. The polymer-supported micelles have average aggregation numbers dependent on surfactant concentration, are highly dissociated when compared with aqueous SDS micelles, and have zeta potentials that increase linearly with the fraction of PVP at constant SDS concentration. The analysis of the SAXS measurements indicated that the PVP/PEG/SDS system forms surface-charged aggregates of a cylindrical shape with an anisometry (length to cross-section dimension ratio) of about 3.0.     

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.     

Formation of reversible shell cross-linked micelles from the biodegradable amphiphilic diblock copolymer poly(L-cysteine)-block-poly(L-lactide)

A novel biodegradable diblock copolymer, poly(L-cysteine)-b-poly(L-lactide) (PLC-b-PLLA), was synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of beta-benzyloxycarbonyl-L-cysteine (ZLC-NCA) with amino-terminated poly(L-lactide) (NH 2-PLLA) as a macroinitiator in a convenient way. The diblock copolymer and its precursor were characterized by (1)H NMR, Fourier transform infrared (FT-IR), gel permeation chromatography (GPC), and X-ray photoelectron spectroscopy (XPS) measurements. The length of each block polymer could be tailored by molecular design and the ratios of feeding monomers. The cell adhesion and cell spread on the PZLC-b-PLLA and PLC-b-PLLA films were enhanced compared to those on pure PLA film. PLC-b-PLLA can self-assemble to form micelles in aqueous media. A pyrene probe is used to demonstrate the micelle formation of PLC-b-PLLA in aqueous solution. Due to the ease of disulfide exchange with thiols, the obtained micelles are reversible shell cross-linked (SCL) micelles. The morphology and size of the micelles are studied by dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM).     

Assessment of the integrity of poly(caprolactone)-b-poly(ethylene oxide) micelles under biological conditions: a fluorogenic-based approach

The integrity of block copolymer micelles is important for their effectiveness and successful delivery of the incorporated drugs. Here we evaluate the integrity of poly(caprolactone)-b-poly(ethylene oxide) micelles in media of varying chemical complexity and in cells by using fluorogenic micelles. Fluorogenic dye fluorescein-5-carbonyl azide diacetate was covalently attached to the micelle-core-forming part of the block copolymer, poly(caprolactone). The fluorescence was not detectable unless the poly(caprolactone)21-b-poly(ethylene oxide)45 micelles were destroyed and the fluorogenic dye was activated by deesterification. The fluorescence of the activated dye from destroyed micelles was easily detectable in various media and in cells. Micelles were stable in simple media such as phosphate-buffered saline but disassembled to varying extents with increasing chemical complexity of the media and addition of serum. The integrity of the internalized micelles within the cells showed a time-dependent decrease but remained largely preserved (80%) after 20 h of incubation with cells. A proof of principle was also demonstrated in vivo in mice. The fluorogenic approach to micelle integrity assessment presented herein should lend itself to other block copolymer micelles and assessments of their integrity in complex biological systems in vitro and in vivo.     

Effect of an anionic surfactant on the complexation of some nonionic polymers with iodine in aqueous media

Complexation of some water soluble nonionic polymers, namely, polyvinylalcohol (PVA), polyvinylpyrrolidone (PVP), and hydroxypropyl cellulose (HPC), with iodine has been studied in aqueous and aqueous sodiumdodecylsulfate (SDS) solution. While the complexation was indicated by a red shift of the tri-iodide band in case of PVP or HPC, the PVA-iodine complex showed its characteristic band around 500 nm. It was observed for the first time that presence of SDS led to complete break down of the PVA-iodine complex and its characteristic blue color. The presence of monomers of SDS, however, appeared to favor the formation of the iodine complex with PVP or HPC. Addition of n-propanol, which is known to prevent the formation of gels or microgels in polymer solutions, was found to enhance the polymer-iodine complex. Gels of pure HPC and HPC with iodine both in presence and absence of SDS have been prepared and studied.