Photolysis of hexamethyldisilane at 206 nm

The photolysis of Me₆Si₂ at 206 nm results in two main decomposition processes: simple Si---Si bond breaking with a quantum yield of Φ = 0.21 ± 0.03, and Me₃SiH elimination with the concomitant formation of Me₂SiCH₂ with Φ = 0.18 ± 0.01. There is also a minor decomposition channel with a very small quantum yield, Φ = (5.6 ± 0.2) × 10⁻³, which results in the formation of Me₄Si and Me₂Si. The main fate of the excited Me₆Si₂ molecule produced during photolysis is stabilization by collisional deactivation. The end products observed indicate that the reaction pathways followed by the main intermediates, Me₃Si and Me₂SiCH₂, are the same as those found in the photolysis of Me₄Si (Ahmed et al., J. Photochem. Photobiol. A: Chem. 86 (1995) 33).     

Perfluormethyl-element-liganden : XXXI. Ligandeneigenschaften von Me2PP(CF3)2 und Me2AsP(CF3)2

The coordinating properties of the trifluoromethyl elemental compounds Me₂PP(CF₃)₂ and Me₂AsP(CF₃)₂ have been studied by the synthesis and spectroscopic investigations (IR, NMR, MS) of their complexes cis-M(CO)₄L₂ (A), [(CO)₄ML]₂ (B) and [(CO)₅M]₂L (C) (M = Cr, Mo, W). Complexes of type A with L = Me₂PP(CF₃)₂ are obtained in good yield by reaction with M(CO)₄NBD (NBD = norbornadiene), whereas with L = Me₂AsP(CF₃)₂ the homobinuclear compounds B are formed. The attempt to prepare the cis-M(CO)₄[Me₂AsP(CF₃)₂]₂ complexes by treating M(CO)₄(Me₂AsH)₂ with P₂(CF₃)₄ is successful only for M = W. Binuclear compounds of type B or C, in general, can be prepared by stepwise reaction of the ligands with either M(CO)₄NBD or M(CO)₅THF.     

Titanium imido complexes containing 1,3,5-triazacyclohexane ligands

The syntheses of the 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane-supported imido complexes [M(NR)(R′₃tach)Cl₂] (M = Ti or Zr (NMR only); R = Bu^t or 2,6-C₆H₃Prⁱ₂; R′ = Me or Bu^t) are reported, along with that of the thermally robust dibenzyl derivative [Ti(NBu^t)(Me₃tach)(CH₂Ph)₂]. The tert-butylimido ligand in [Ti(NBu^t)(Me₃tach)Cl₂] undergoes exchange with ArNH₂ (Ar = 4-C₆H₄Me or 2,6-C₆H₄Me or 2,6-C₆H₃Prⁱ₂) to form the corresponding arylimides [Ti(NAr)(Me₃tach)Cl₂]. The Me₃tach ring in [Ti(NR)(Me₃tach)Cl₂] undergoes slow exchange with Bu^t₃tach or Me₃tacn (1,4,7-trimethyl-1,4,7-triazacyclononane) to give the ring-exchanged products [Ti(NR)(Bu^t₃tach)Cl₂] and [Ti(NR)(Me₃tacn)Cl₂], respectively. The complexes [Ti(NR)(Me₃tach)X₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂; X = Cl or CH₂Ph) exhibit room-temperature dynamic NMR behaviour via an unusual trigonal twist of the facially coordinated Me₃tach ligand, and the activation parameters for these processes have been measured and are discussed. The X-ray structures of [Ti(NR)(Bu^t₃tach)Cl₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂) and [Ti(NBu^t)(Me₃tach)(X)₂] [X= Cl or CH₂Ph) are reported. Me₃tach and Bu^t₃tach = 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane, respectively.     

Zur reaktion von metall-koordiniertem kohlenmonoxid mit yliden : XX. “Ylidreaktionen” einfacher dicarbonyl(pentamethylcyclopentadienyl)rutheniumkomplexe

Treatment of the dimer complex [C₅Me₅ (CO)₂ Ru]₂ (1) with HBF₄ in CH₂Cl₂ at room temperature yields the hydrido-bridged dinuclear complex [(C₅Me₅)₂Ru₂(CO)₄H]BF₄ (2), and after refluxing in propionic anhydride [C₅Me₅(CO)₃Ru]BF₄ (5) is obtained, UV-irradiation of 1 in the presence of H₂CHal₂ (Hal = Cl, I) or trimethylphosphine leads to the formation of C₅Me₅(CO)₂Ru-Hal (3a, 3b) or C₅Me₅(CO)(Me₃P)RuH (4) respectively. Exchange reactions of 3a, 3b with LiAlH₄, NaOMe and Me₃ P give the complexes C₅Me₅(CO)₂RuX (6a,6b) (X=H, OMe), C₅Me₅(CO)(Me₃P)Ru-Hal (7a,7b) (Hal = Cl, I) and C₅Me₅(Me₃P)₂RuI (8). The interaction of 3b or 5 with Me₃P=CH₂ leads to the formation of the ylide complex [C₅Me₅(CO)(Me₃P)-RuCH₂PMe₃)Cl (9) or the rutheniumacyl-ylide C₅Me₅(CO)₂RuC(O)CH=PMe₃ (10). 4 reacts with Me₃P=CH₂ to give C₅Me₅(CO)(Me₃P)RuMe (11) and Me₃P via the intermediate formation of the phosphonium salt Me₄P[Ru(CO) (Me₃P)-C₅Me₅].     

Reaction of the tetrasulphidomolybdenum(IV) complex LMo(NCS)(S4) with dicarbomethoxyacetylene: X-ray structure of LMo(NCS){S2C2(CO2Me)2} [L = hydrotris(3,5-dimethylpyrazolyl)borate]

The reaction of {HB(Me₂pz)₃}Mo(NCS)(S₄) [HB(Me₂pz)₃⁻ = hydrotris(3,5-dimethylpyrazolyl)borate anion] with dicarbomethoxyacetylene in refluxing toluene results in the formation of the brown, diamagnetic complex {HB(Me₂pz)₃}Mo(NCS){S₂C₂(CO₂Me)₂} (1) (the reactants above also yield 1 upon prolonged reaction in dichloromethane at 25°C), which has been characterized by X-ray crystallography. The mononuclear pseudo-octahedral complex contains a facially tridentate HB(Me₂pz)₃⁻ ligand, a monodentate N-bound NCS⁻ ligand, and a bidentate S₂C₂(CO₂Me)₂²⁻ ligand having a near planar MoS₂C₄ fragment and a SC=CS bond distance of 1.342(15) Å. Solutions of 1 are unstable in air and decompose to produce {HB(Me₂pz)₃}MoO₂(NCS) and {HB(Me₂pz)₃}MoO(NCS)₂.     

A new synthetic route to aminophosphines

The reactions of R₂PPR₂ (R = Me, Et, Ph) and (MeP)₅ with Me_3−nAs(NMe₂)_n (n = 1, 2, 3) and of Me₂PPMe₂ with Me₂AsNR′₂ (R′ = Et, Prⁿ, and Prⁱ) were investigated as a function of time at room temperature using ¹H and ³¹P NMR spectroscopy. For the diphosphine/Me₂AsNR′₂ reactions, the NMR spectral data suggest a reaction pathway involving the initial formation of R₂PAsMe₂ and the respective acyclic dialkylaminophosphine, R₂PNR′₂. The P---As intermediate then symmetrizes to R₂PPR₂ and Me₂AsAsMe₂, the parent aminoarsine is completely consumed, and additional R₂PNR′ is formed. The relative rate of aminophosphine production is dependent upon the nature of the substituent on the phosphorus and nitrogen atoms. For systems involving MeAs(NMe₂)₂ and As(NMe₂)₃ as reactants, the intermediates could not be characterized, but the products were the expected aminophosphine and (MeAs)₅ or elemental arsenic, respectively. (MeP)₅ reacts to give MeP(NMe₂)₂ and the expected As---As bonded species. A comparison of the reactivity of these systems with analogous diarsine/aminoarsine systems is discussed. The results of the NMR study were utilized in designing a convenient, high yield, synthetic route to acyclic aminophosphines.     

[(Me3Sn)2(Me3Sb)M(CN)6]∞ (M = Fe, Ru): Neuartige Organo-Sn/Sb-Polymere von besonderer chemischer und thermischer stabilität

The thermally (decomp. temp. 300°C) and completely air stable, novel coordination polymers [(Me₃Sn^IV)₂(Me₃Sb^V)M^II(CN)₆]_∞ with M = Fe and Ru can be prepared by co-precipitation from aqueous solutions of Me₃SnCl, Me₃SbBr₂ and K₄[(M(CN)₆], or, alternatively, by the ion-exchange-like reaction of the polymers [A(Me₃Sn)₃M(CN)₆]_∞ (A⁺ = Et₄N⁺, Cp₂Co⁺, Me₃Sn⁺ etc.) with Me₃SbBr₂. IR-spectroscopic findings suggest a statistical distribution of quasi-octahedral M(CN-Sn··)_6-x(CNSb ··)_x building blocks (with x = 0–6) within a three-dimensional network.     

The reactivity of dimethylaluminum hydride with the aminoarsines Me2AsNMe2, MeAs(NMe2)2, and As(NMe2)3

The reactions of (Me₂AlH)₃ with Me₂AsNMe₂, MeAs(NMe₂)₂, and As(NMe₂)₃ were investigated as a function of time at room temperature and over the temperature range −90 to 24°C by use of ¹H and ¹³C NMR spectroscopy. (Me₂AlH)₃ was found to be very reactive toward the aminoarsines, even at −90°C, and no stable Me₂AlH-aminoarsine adducts were observed. Instead, the initial stages of the reactions involved AS---N bond cleavage with the generation of highly reactive AlN- and AsH-bonded species. The subsequent course of each reaction and the final arsenic-containing product distribution depended upon the original AL:N stoichiometric ratio and the respective aminoarsine. When the Al:N ratio was 1:1, the reactions were straightforward for each aminoarsine. However, in every case, [Me₂AlNMe₂]₂ was the final AlN-containing product. Independent reactions were carried out to verify many of the proposed decomposition pathways that lead to thermodynamically stable products. The results of this study are compared with those of the analogous, previously reported (Me₃Al)₂-aminoarsine systems. Additionally, a new synthetic route to [Me₂AlAsMe₂]₃ has been established from the reaction of (Me₂AlH)₃ with Me₂AsH.     

Anchimeric assistance in solvolysis of an organosilicon chloride and acetate

The compound (Me₃Si)₃CSiMeClI reacts with Hg(OAc)₂ in AcOH to give (Me₃Si)₂C(SiMe₂OAc)₂, under conditions in which the chloride (Me₃Si)₃CSiMe₂Cl is inert. Similarly, (Me₃Si)₂C(SiMe₂OAc)₂ reacts with CF₃CO₂H to give (Me₃Si)₂C[SiMe₂(O₂CCF₃)]₂ under conditions in which (Me₃Si)₃CSiMe₂OAc is inert. The results can be accounted for in terms of anchimeric assistance by the neighbouring acetoxy or trifluoroacetoxy group to the breaking of the Si---Cl or Si---OAc bond.     

Novel cyclopentadienyl silanes and disilanes: synthesis, structure and gas-phase pyrolysis

The new chloro(cyclopentadienyl)silanes Cp′SiH_yCl_3−y (Cp′=Me₄EtC₅, y=1: 1; Cp′=Me₄C₅H, y=1: 2; y=0: 3; Cp′=Me₃C₅H₂, y=1: 4 and pentachloro(cyclopentadienyl)disilanes Cp′Si₂Cl₅ (Cp′=Me₅C₅ 5, Me₄EtC₅ 6, Me₄C₅H 7, Me₃C₅H₂ 8, Me₃SiC₅H₄ 9) are synthesized in good yields via metathesis reactions. Treatment of 1–9 with LiAlH₄ leads under Cl–H exchange to the hydridosilyl compounds Cp′SiH₃ (Cp′=Me₄EtC₅ 10, Me₄C₅H 11, Me₃C₅H₂ 12) and to the hydridodisilanyl compounds Cp′Si₂H₅ (Cp′=Me₅C₅ 13, Me₄EtC₅ 14, Me₄C₅H 15, Me₃C₅H₂ 16, Me₃SiC₅H₄ 17). Complexes 1–17 are characterized by ¹H, ¹³C, and ²⁹Si-NMR spectroscopy, IR spectroscopy, mass spectrometry and CH-analysis. The structures of 6, 7 and 9 are determined by single-crystal X-ray diffraction analysis. Pyrolysis studies of the cyclopentadienylsilanes 10–12 and disilanes 13–17 show their suitability as precursors in the MOCVD process.     

Organoplatinum(IV) compounds : II. Preparation and characterization of trimethylplatinum(IV) compounds with chelating nitrogen donor ligands. The crystal and molecular structure of iodotrimethyl[bis(3,5-dimethyl-1-pyrazolyl)methane]platinum(IV)

Compounds of the types Me₃PtX(NN) (where X = Cl, I, OAc, NO₃; NN = bis(1-pyrazolyl)methane (pz₂CH₂), bis(3,5-dimethyl-1-pyrazolyl)methane ((Me₂pz)₂CH₂), or bis(2-pyridyl)methane (py₂CH₂)), [Me₃Pt(NNN)][PF₆] (where NNN=tris(1-pyrazolyl)methane (pz₃CH), or tris(2-pyridyl)methane (py₃CH)), and [Me₃Pt((Me₂pz)₂CH₂(py)][PF₆] have been prepared and characterized by elemental analyses and ¹H and ¹³C NMR spectroscopy; the structure of Me₆PtI[(Me₂pz)₂CH₂] (1) has also been determined by X-ray crystallography. Crystals of 1 are orthorhombic, space group Pcmn with four molecules in a unit cell of dimensions a 11.936(5), b 14.462(4), c 10.138(5) Å. The structure was solved by the heavy-atom method and refined by full-matrix least-squares calculations to R = 0.022 for 1719 observed data. The molecule has crystallographic mirror symmetry. The Pt atom has octahedral geometry with one methyl group trans to iodine and two methyl groups trans to the N atoms of the bidentate ligand (Pt---I 2.843(1), Pt---N, 2.236(4), Pt---C 2.077(6) (trans to I) and 2.032(5) Å (trans to N)).     

Chemie der schweren carben-analogen R2M, M = Si, Ge, Sn : XVIII. Eine unerwartete Ge---C-Spaltung des als Dimethylgermylen-Speicher dienenden 7,7-Dimethyl-7-germanorbornadiens

During thermolysis of the 7-germanorbornadiene 1 in chlorobenzene at 70°C in the presence of concentrated hydrochloric acid, besides the well-known formation of free germylene Me₂Ge and its consecutive product dimethylchlorogermane 2, the polar splitting of only one Ge---C bond in 1 has been observed for the first time. It does not yield Me₂Ge, but instead it rapidly forms the 1-germyl-1,4-dihydronaphthalene 3. The kinetics of this reaction at 53°C are of 2nd order, t_1/2 = 20 min, k = 0.22 l mol⁻¹ min⁻¹. At room temperature 3 is formed quantitatively. Also, at 70°C the slower formation of the germylene Me₂Ge from 1 can be suppressed completely if HCl gas is bubbled through the reaction mixture, thus favouring the rapid formation of 3. As a by-product the 1,2-dihydronaphthalene 5 is generated.     

Preparation and reactions of some sterically hindered silanols, including [tris(trimethylsilyl)methyl]silanetriol

The silanol TsiSiMe₂OH (Tsi = (Me₃Si)₃C) has been made by hydrolysis of the iodide TsiSiMe₂I in H₂O/dioxane or H₂O/Me₂SO. It has been shown to react with some acid chlorides RCOCl (R=Me, Et, CICH₂ Ph, 4-O₂NC₆H₄, and 3,5- (O₂N)₂C₆H₃) and anhydrides (RCO)₂O (R = Me, CF₃, or Ph) to give the carboxylates TsiSiMe₂OCOR, and with SO₂Cl₂ to give TsiSiMe₂OSO₂Cl. The triol TsiSi(OH)₃ has been made by treatment of TsiSiH(OH)I with H₂O/Me₂SO at 150°C or with a mixture of aqueous AgClO₄ and an organic solvent. The triol has been shown to react with RCOCl (R = Me, Et, or Ph) or (RCO)₂O (R = Ph) to give the corresponding TsiSi(OCOR)₃, with (CF₃CO)₂O to give TsiSi(OH)₂(OCOCF₃), and with a mixture of Me₃SiCl and AgClO₄ in benzene or one of Me₃Sil and (Me₃Si)NH to give TsiSi(OSiMe₃)₃. The triol is unusually stable, but decomposes at its m.p. of 285–290°C.     

碳锗双桥连二环戊二烯与羰基铁的反应

碳锗双桥连二环戊二烯(Me₂C)(Me₂Ge)(C₅H₄)₂(1)与五羰基铁在回流甲苯及二甲苯中的反应,得到正常的Fe-Fe键化合物(Me₂C)(Me₂Ge)[(η⁵-C₅H₃)Fe(CO)]₂(μ-CO)₂(3)和脱锗桥产物(Me₂C)[(η⁵-C₅H₄)Fe(CO)]₂(μ-CO)₂(4)以及一个结构新颖的化合物(Me₂C)[(η⁵-C₅H₃)[(Me₂Ge)Fe(CO)₂](η¹,η⁵-C₅H₃)[Fe(CO)₂](2).用X射线衍射分析測定了化合物3的晶体结构,并提出了可能的生成机理.     

Dimethyldichloroantimon-azid und -cyanat

Dimethyldichloroantimony azide and cyanate, prepared by the reaction of Me₂SbCl₃ with NaN₃ and AgNCO, respectively, form as shown by mass, IR and Raman spectroscopic data dimeric compounds of the type Me₂Cl₂Sb(X)₂SbCl₂ - Me₂ (X = N₃, NCO), bridged by the -N-atoms of the N₃-groups or by the N-atoms of the NCO groups, respectively.     

Synthesis of mixed diarylgold(III) complexes. Crystal structure of cis-[2-(phenylazo)phenyl][2-{(dimethylamino)methyl}phenyl]gold(III) tetrachloroaurate

The reaction (1 : 1) between [A Me₂)Cl₂] and [Hg(2-C₆H₄-N=NPh)₂] gives the complex [(2-PhN=NC₆H₄)A MeC₂)Cl], which on treatment with AgClO₄ gives [(2-Ph Me₂)]ClO₄. From this complex, the species [(2-PhN=NC₆H₄)A Me₂)X] (X = CH₃COO, CN), or [(2-PhN=NC₆H₄)A Me₂)L] (L = PPh₃, py) are obtained by reaction with the corresponding KX salts or neutral ligands.

The crystal structure of [(2-Ph Me₂)][AuCl₄] (obtained by metathesis between the corresponding perchlorate and tetramethylammonium salts) has been determined; the cation displays square-planar coordination with two cis-nitrogen (Au---N: 2.166(15), 2.140(14) Å) and two cis-carbon (Au---C: 2.021(16), 2.033(17) Å) atoms bonded to the gold atom.     

Reactions of the sterically hindered organosilicon diol (Me3Si)2C(SiMe2OH)2 and some of its derivatives

The diol R₂C(SiMe₂OH)₂ (R = Me₃Si) has been shown to react with: SO₂Cl₂ to give R₂ Me₂; SOCl₂ to give R₂C(SiMe₂Cl)₂; Me₃SiI or Me₃SiCl to give R₂C(SiMe₂OSiMe₃)₂; R′COCl; (R′ = Me or CF₃) to give R₂C(SiMe₂O₂CR′)-(SiMe₂Cl); (R′CO)₂O (R′ = Me or CF₃ to give R₂C(SiMe₂O₂CR′)₂; with MeOH containing acid to give R₂C(SiMe₂OMe)₂; with neutral MeOH to give R₂C-(SiMe₂OMe)₂ and probably R₂ Me₂; MeLi to give R₂C(SiMe₂OLi)₂ (and the latter to react with PhMeSiF₂ to give R₂ Me₂). The diacetate R₂C(SiMe₂O₂CMe)₂ reacts with CsF in MeCN to give R₂C(SiMe₂F)₂; it does not react with NaN₃ or KSCN in MeCN, but the bis(trifluoroacetate) reacts with these salts with KOCN to give R₂C(SiMe₂X)₂ (X = N₃, NCS, NCO).     

Diffusion rayleigh depolarisee en serie organosilicique : II. Composes a liaisons C---Si, N---Si, O---Si

The authors establish that Z---Si and Z---SiMe₃ (Z = C, N, O) bond optical anisotropies are positive. This report involving conformational aspect of the compounds Me₃MCH₂CHMe₂ (M = C, Si), Me₃SiOCHMe₂ and Me₃SiN(Me)CHMe₂ brings a complementary argument in favour of the positive sign of these anisotropies.     

四甲基双硅桥联环戊二烯基稀土金属有机配合物的合成及[Me4Si2(C5H4)2Sm(μ-Cl)(THF)]2的晶体结构研究

四甲基双硅桥联环戊二烯基钠与无水三氯化稀土在THF溶剂中反应合成了标题配合物Me₄Si₂(C₅H₄)₂LnCl[Ln:3Nd,4Sm,5Gd,6Y]和配合物Me₄Si₂(C₅H₄):Ln(C₅H₅)(THF)n[Ln:1La,n=1;2Pr,n=0].通过元素分析、¹HNMR、13CNMR和MS确证了配合物的结构,在THF溶液中重结晶获得配合物4的单晶,x射线衍射证明晶体结构为二聚体,4为单斜晶系,空间群为P2₁/c,晶体学数据a=1.2982(3)nm,b=1.2269(3)nm,c=1.3681(2)nm,β=96.79(2)°,V=2.162(1)nm³,Z=2,D_x=1.53g/cm³,偏差因子R=0.068.     

Über dimere dimethylmetall-bis(trimethylgermyl)amide des aluminiums, galliums und indiums

The dimethylmetal bis(trimethylgermyl)amides of Al, Ga, and In have been prepared from Li[N(GeMe₃)₂] and Me₂MCl (Me = CH₃, M = Al, Ga) or Me₂MCN (M = Ga, In) in inert solvents. The NMR (¹H, ¹³C) and vibrational spectra (IR and Raman) of these dimeric compounds have been assigned and discussed. According to the X-ray structure determination [Me₂InN(GeMe₃)₂]₂ crystallizes in the monoclinic space group C2/c (Z = 4, R = 0.032) and is isomorphous with the bis(trimethylsilyl) homologue.