Electrocatalytical oxidation of hydroquinone with ferrocene covalently bound to L-cysteine self-assembled monolayers on a gold electrode

The preparation of a gold electrode modified by ferrocenecarboxylic acid (FcA) covalently bound to L-cysteine self-assembled monolayer (FcA-SAM) is described. The modified electrode shows an excellent electrocatalytic activity for the oxidation of hydroquinone (QH2) and accelerates the electron transfer rate. The anodic overpotential is reduced by ca. 290 mV compared to those obtained at bare gold electrodes. The charge transfer coefficient and the apparent surface electron transfer rate constant for the redox couple of Q/QH2 at the modified electrode are found to be 0.425 and 0.96 s(-1), respectively. The catalytic current response of DPV increases linearly with the QH2 concentration from 5.7 x 10(-7) to 3.2 x 10(-4) M. The estimation of QH2 in a simulative sample is satisfactory. The method is simple, quick, and sensitive.     

Attachment of tyrosinase on mixed self-assembled monolayers for the construction of electrochemical biosensor

<正>A mixed self-assembled monolayers(SAMs) of thioctic acid(T-COOH) and thioctic acid amide(T-NH_2) were used to immobilize tyrosinase for fabricating biosensor.The results showed that the mixed SAMs prepared from solution at the ratio of 1:4 provided an excellent microenvironment for enzymatic reaction between tyrosinase and substrate.The biosensor exhibited a fast response and high sensitivity for sensing substrate.     

Electrochemically controlled self-assembled monolayers characterized with molecular and sub-molecular resolution

Self-assembled organization of functional molecules on solid surfaces has developed into a powerful and sophisticated tool for surface chemistry and nanotechnology. A number of reviews on the topic have been available since the mid 1990s. This perspective article aims to focus on recent development in the investigations of electronic structures and assembling dynamics of electrochemically controlled self-assembled monolayers (SAMs) of thiol containing molecules on gold surfaces. A brief introduction is first given and particularly illustrated by a Table summarizing the molecules studied, the surface lattice structures and the experimental operating conditions. This is followed by discussion of two major high-resolution experimental methods, scanning tunnelling microscopy (STM) and single-crystal electrochemistry. In Section 3, we briefly address choice of supporting electrolytes and substrate surfaces, and their effects on the SAM structures. Section 4 constitutes the major body of the article by offering some details of recent studies for the selected cases, including in situ monitoring of assembling dynamics, molecular electronic structures, and the key external factors determining the SAM packing. In Section 5, we give examples of what can be offered by theoretical computations for the detailed understanding of the SAM electronic structures revealed by STM images. A brief summary of the current applications of SAMs in wiring metalloproteins, design and fabrication of sensors, and single-molecule electronics is described in Section 6. In the final two sections (7 and 8), we discuss the current status in understanding of electronic structures and properties of SAMs in electrochemical environments and what could be expected for future perspectives.     

Large-scale molecular dynamics simulations of alkanethiol self-assembled monolayers

Large-scale molecular dynamics simulations of self-assembled alkanethiol monolayer systems have been carried out using an all-atom model involving a million atoms to investigate their structural properties as a function of temperature, lattice spacing, and molecular chain length. Our simulations show that the alkanethiol chains of 13-carbons tilt from the surface normal by a collective angle of 25 degrees along next-nearest-neighbor direction at 300 K. The tilt structure of 13-carbon alkanethiol system is found to depend strongly on temperature and exhibits hysteresis. At 350 K the 13-carbon alkanethiol system transforms to a disordered phase characterized by small collective tilt angle, flexible tilt direction, and random distribution of backbone planes. The tilt structure also depends on lattice spacing: With increasing lattice spacing a the tilt angle increases rapidly from a nearly zero value at a=4.7 A to as high as 34 degrees at a=5.3 A at 300 K for 13-carbon alkanethiol system. Finally, the effects of the molecular chain length on the tilt structure are significant at high temperatures.     

Adsorption of sulfite oxidase on self-assembled monolayers from molecular dynamics simulations

Sulfite oxidase (SO) is an enzyme catalyzing the terminal step of the metabolism of sulfur-containing amino acids that is essential for almost all living organisms. The catalytic activity of SO in vertebrates strongly depends on the efficiency of the intramolecular electron transfer (IET) between the catalytic Moco domain and the cytochrome b5 (cyt b5) domain. The IET process is assumed to be mediated by large domain motions of the cyt b5 domains within the enzyme. Thus, the interaction of SO with charged surfaces may affect the mobility of the cyt b5 domain required for IET and consequently hinder SO activation. In this study, we present a molecular dynamics approach to investigating the ionic strength dependence of the initial surface adsorption of SO in two different conformations-the crystallographic structure and the model structure for an activated SO-onto mixed amino- and hydroxyl-terminated SAMs. The results show for both conformations at low ionic strengths a strong adsorption of the cyt b5 units onto the SAM, which inhibits the domain motion event required for IET. Under higher ion concentrations, however, the interaction with the surface is weakened by the negatively charged ions acting as a buffer and competing in adsorption with the cathodic cyt b5 domains. This competition prevents the immobilization of the cytochrome b5 units onto the surface, allowing the intramolecular domain motions favoring IET. Our predictions support the interpretation of recent experimental spectroelectrochemical studies on SO.     

Conducting ferrocene monolayers on nonconducting surfaces

The redox activity of a ferrocenyl monolayer grafted on an n-type Si111 substrate was investigated by scanning electrochemical microscopy (SECM) in conditions where the substrate plays the role of an insulator. This approach permits the differentiation between the different possible electron-transfer and mass-transport pathways occurring at the interface. As an exciting result, the thin ferrocenyl monolayer behaves like a purely conducting material, highlighting very fast electron communication between immobilized ferrocenyl headgroups in a 2D-like charge-transport mechanism.     

Ultrafast shock compression of self-assembled monolayers: a molecular picture

Simulations of self-assembled monolayers (SAMs) are performed to interpret experimental measurements of ultrafast approximately 1 GPa (volume compression deltaV approximately 0.1) planar shock compression dynamics probed by vibrational sum-frequency generation (SFG) spectroscopy (Lagutchev, A. S.; Patterson, J. E.; Huang, W.; Dlott, D. D. J. Phys. Chem. B 2005, 109, XXXX). The SAMs investigated are octadecanethiol (ODT) and pentadecanethiol (PDT) on Au(111) and Ag(111) substrates, and benzyl mercaptan (BMT) on Au(111). In the alkane SAMs, SFG is sensitive to the instantaneous orientation of the terminal methyl; in BMT it is sensitive to the phenyl orientation. Computed structures of alkane SAMs are in good agreement with experiment. In alkanes, the energies of gauche defects increase with increasing number and depth below the methyl plane, with the exception of ODT/Au where both single and double gauche defects at the two uppermost dihedrals have similar energies. Simulations of isothermal uniaxial compression of SAM lattices show that chain and methyl tilting is predominant in PDT/Au, ODT/Ag and PDT/Ag, whereas single and double gauche defect formation is predominant in ODT/Au. Time-resolved shock data showing transient SFG signal loss of ODT/Au and PDT/Au are fit by calculations of the terminal group orientations as a function of deltaV and their contributions to the SFG hyperpolarizability. The highly elastic response of PDT/Au results from shock-generated methyl and chain tilting. The viscoelastic response of ODT/Au results from shock generation of single and double gauche defects. Isothermal compression simulations help explain and fit the time dependence of shock spectra but generally underestimate the magnitude of SFG signal loss because they do not include effects of high-strain-rate dynamics and shock front and surface irregularities.     

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.     

Electron transfer in metal-molecule-metal junction composed of self-assembled monolayers of helical peptides carrying redox-active ferrocene units

Electronic properties of three kinds of helical peptides with or without redox-active ferrocene units were investigated by using scanning tunneling microscopy under ultrahigh vacuum. The currents through the helical peptides carrying ferrocene units at the molecular terminals became significantly larger than that through a reference peptide without any ferrocene units. On the other hand, ferrocene units in the middle of the peptide chain did not affect the current-voltage characteristics. These results indicate that the ferrocene units near the metal electrode should play an important role for efficient electron transfer between the metal and the peptide molecules, which process is one of the rate-determining steps for characterizing molecular conductance in metal-molecule-metal junction.     

Anion recognition and redox sensing amplification by self-assembled monolayers of 1,1'bis(alkyl-N-amido)ferrocene

Surface pre-organisation within robust amidoferrocene self-assembled monolayers can be exploited in the selective electrochemical sensing of anions in both organic and aqueous media.     

Conglomerate crystallization on self-assembled monolayers

In this communication, we demonstrate that chiral self-assembled monolayers can be used for polymorphism control of chiral crystals. We studied the crystallization of DL-glutamic acid on chiral self-assembled monolayers and showed that crystallization of DL-glutamic acid on the chiral SAMs resulted in stabilization of the metastable conglomerate form.     

Multivalent host-guest interactions between beta-cyclodextrin self-assembled monolayers and poly(isobutene-alt-maleic acid)s modified with hydrophobic guest moieties

Poly(isobutene-alt-maleic acid)s modified with p-tert-butylphenyl or adamantyl groups interact with beta-cyclodextrin self-assembled monolayers (beta-CD SAMs) by inclusion of the hydrophobic substituents in the beta-cyclodextrin cavities. The adsorption was shown to be strong, specific, and irreversible. Even with a monovalent competitor in solution, adsorption to the beta-CD SAMs was observed, and desorption proved impossible. The adsorbed polymer layer was very thin as evidenced by surface plasmon resonance spectroscopy and AFM. Apparently, all or most hydrophobic groups of the polymers were employed efficiently in multivalent binding, as was further supported by the absence of specific binding of beta-CD-modified gold nanoparticles to the polymer surface assemblies. Supramolecular microcontact printing of the polymers onto the beta-CD SAMs led to assembly formation in the targeted areas of the substrates.     

A new redox site as an alternative to ferrocene to study electron transfer in self-assembled monolayers

The cyclometallated ruthenium complex [Ru(bpy)2(pp)]+ (bpy: 2,2'-bipyridine; pp: 2-(2'-ylphenyl)pyridine) was easily grafted to a omega-alkanethiol and the resulting compound was coadsorbed with 11-hydroxyundecanethiol on gold yielding a Self-Assembled Monolayer (SAM) in an analogous manner as for a ferrocene derivative, as shown by impedance spectroscopy; the kinetics of the heterogeneous electron transfer were shown to be very fast, compared to ferrocene, which makes this new redox site a promising candidate for further studies about molecular wires.     

Investigations of tellurium-modified self-assembled monolayers of benzenedithiol on gold surface as molecular gate

In this paper, we report the obtention of tellurium modified with self-assembled monolayers of benzenedithiol on a gold surface as a molecular gate. The switching and electronic transport characteristics of the modified gold surface were investigated by cyclic voltammetry (CV). The CV results indicate that the switching of benzenedithiol gates is controlled by the oxidation state of tellurium, which is regulated by the applied potentials.     

Improved molecular rectification from self-assembled monolayers of a sterically hindered dye

Self-assembled monolayers (SAMs) formed from the reaction of 1-(10-acetylsulfanyldecyl)-4-[2-(4-dimethylaminonaphthalen-1-yl)-vinyl]-quinolinium iodide (1a) and gold-coated substrates exhibit asymmetric current-voltage (I-V) characteristics with a rectification ratio of 50-150 at +/-1 V. It is the highest to date for a molecular diode, and the improved behavior may be assigned in part to the controlled alignment of the donor-(pi-bridge)-acceptor moieties and in part to steric hindrance, which imposes a nonplanar structure and effectively isolates the molecular orbitals of the donor and acceptor end groups. The molecular origin of the rectification is verified by its suppression upon exposure to HCl vapor, which protonates the dimethylamino group and inhibits the electron-donating properties, with restoration upon exposure to NH3. It is also established by a reduced rectification ratio of ca. 2 at +/-1 V when the cationic D-pi-A+ moieties adopt an antiparallel arrangement in self-assembled films of the derivative, bis-[1-(10-decyl)-4-[2-(4-dimethylaminonaphthalen-1-yl)-vinyl]-quinolinium]-disulfide diiodide (1b), which adsorbs via one of its terminal donors without rupture of the sulfur-sulfur bond: Au/D-pi-A+-C10H20-S-S-C10H20-+A-pi-D (I-)2.     

Functionalization of silicon surfaces with Si-C linked beta-cyclodextrin monolayers

Vinyl-terminated heptapodyl beta-cyclodextrins react with hydrogenated silicon surfaces to generate covalently-bound molecular recognition devices.     

The molecular level modification of surfaces: from self-assembled monolayers to complex molecular assemblies

The modification of surfaces with self-assembled monolayers (SAMs) containing multiple different molecules, or containing molecules with multiple different functional components, or both, has become increasingly popular over the last two decades. This explosion of interest is primarily related to the ability to control the modification of interfaces with something approaching molecular level control and to the ability to characterise the molecular constructs by which the surface is modified. Over this time the level of sophistication of molecular constructs, and the level of knowledge related to how to fabricate molecular constructs on surfaces have advanced enormously. This critical review aims to guide researchers interested in modifying surfaces with a high degree of control to the use of organic layers. Highlighted are some of the issues to consider when working with SAMs, as well as some of the lessons learnt (169 references).     

Hydroxide ion adsorption on self-assembled monolayers

It is argued, on the basis of density functional calculations, that a self-assembled monolayer of oligo(ethylene glycol) or n-alkanes in contact with water will preferentially adsorb hydroxyl ions (either from autoionization of water or added to the solution) on both methoxy- and hydroxide-terminated endgroups, thus charging the surface region of the SAM negatively with an estimated charge density of about 1 microC/cm(2) in agreement with recent experiments. The negative charging can explain long-ranged forces between opposing SAM surfaces. On dense SAMs, hydroxyl ions are highly mobile. Hydronium ions can absorb by penetration into the SAM provided there is enough lateral space for their encapsulation. The important role of hydration is demonstrated by calculating the excess binding energy of adsorption using a Born-Haber cycle.