磷酸三丁酯、4-甲基-2戊酮对铝锂溶液中锂的萃取行为

以磷酸三丁酯(TBP)作为主要萃取剂,4-甲基2-戊酮(MIBK)作为协助萃取剂,三氯化铁(FeCl₃)作为共萃剂,以铝锂溶液体系作为试验对象,全面系统的研究了萃取剂的各组成成分、水相溶液的pH值、铁锂原子比、萃取相比、萃取时间以及静置时间对铝锂溶液中锂的萃取效果的影响。通过正交试验确定了萃取反应的最佳反应参数：萃取相比为5∶2,铁锂原子比为2∶1,pH值为1.5,TBP体积分数为70%,MIBK体积分数为15%,萃取时间为10 min。在此条件下,锂的单级萃取率可达82%,锂铝单级分离因数可达51。对萃取分离过程的反应机理进行了研究,深入探索了铁锂共萃取效应,确定了反应产生的萃合物形态为LiFeCl₄·2TBP·MIBK,并探究了萃合物形成过程中的键合方式。该萃取方法经济高效,适用于铝锂溶液中锂的分离。     

磷酸三丁酯/正辛醇络合萃取对氯苯酚

以对氯苯酚稀溶液为研究对象,以正辛醇为稀释剂,研究了萃取剂种类及其浓度、水相平衡pH、对氯苯酚初始浓度等因素对萃取分配比的影响,并用NaOH对其负载溶质的有机相进行反萃.结果表明,络合萃取对处理高浓度对氯苯酚废水具有优势;磷酸三丁酯(TBP)的浓度和体系的pH是影响络合萃取的关键因素;采用NaOH对有机相进行反萃,当NaOH浓度为0.5mol/L时反萃率达到98.55%.红外光谱分析表明,TBP萃取对氯苯酚基于氢键作用机理.     

萃取法去除硫酸氧钛液中杂质铁

采用溶剂萃取法有效去除了钛白粉制备过程中的中间产物硫酸氧钛液中大量的杂质铁。 将硫酸氧钛液中的Fe2+氧化成Fe3+后,用磷酸三丁酯(TBP)和煤油混合体系萃取除去Fe3+。 考察了氧化剂、稀释剂、有机相中TBP体积分数、萃取相比、NaCl加入量等对铁萃取率的影响以及反萃条件的选择和萃取剂的循环使用效果,结果表明,用煤油作稀释剂,TBP在有机相的体积分数为60%,萃取相比O/W为2∶1时,NaCl加入量以Cl-计4 mol/L,Fe3+的3次萃取率可达99%,钛的损失率低至0.4%。当反萃相比W/O为1∶1时,Fe3+的3次反萃率可达100%。TBP经过5次萃取-反萃循环使用后,对Fe3+的萃取率无明显下降,可循环使用。     

TBP对含钛原料酸浸液中盐酸的萃取分离

研究了TBP(磷酸三丁酯)对盐酸的萃取和反萃性能。萃取过程研究和红外光谱分析结果表明:盐酸以TBP·HCl的形式进入有机相,萃取速度很快,一分钟达萃取平衡。盐酸萃取率随萃取剂浓度的增加而增加,而对钙、镁、铝无萃取性能,可实现含钛原料酸浸液中盐酸的萃取分离。以水为反萃剂,可有效反萃萃取液中的盐酸。模拟逆流萃取,绘制了以100%TBP为萃取剂,对6 mol·L~(-1)盐酸进行萃取的萃取-反萃等温线。     

从含镁二壬基萘磺酸-磺化煤油溶液中反萃取镁的研究

采用简单的反萃取法回收二壬基萘磺酸-磺化煤油溶液中的镁。考察了反萃剂种类、反萃时间、反萃转速、反萃剂浓度、反萃相比(有机相与水相的体积比)O/A值对反萃取率的影响。研究结果表明:在常温下,以硫酸作反萃取剂,反萃剂浓度为4 mol·L-1,反萃时间为20 min,反萃取震荡转速为200 rpm,反萃相比O/A值为5时,镁的反萃率可达93.98%,经过反萃后得到的二壬基萘磺酸-磺化煤油溶液可以重复萃取冶金废水的镁离子,镁的萃取率保持不变。这一研究结果对于冶金行业废水的处理与综合利用具有重要参考价值。     

盐湖卤水协同萃取提锂及基础热力学性质

为了充分利用盐湖卤水中丰富的锂资源,提出了以磷酸三丁酯(TBP)-乙酸丁酯(BA)-FeCl3-260#磺化煤油体系协同萃取提锂的方法。针对该体系,考察了卤水酸度、nFe/nLi比以及温度对协同萃取过程的影响。根据锂离子及其它主要离子萃取率的变化,确定了最优萃取条件为:pH=2,nFe/nLi=3.0,T=20℃。在最优条件下,单级萃取率达到90%左右。同时,研究了萃取过程的热焓、吉布斯自由能及熵变等基础热力学性质。结果表明,在选定的萃取体系和条件下,锂的萃取反应为放热反应,萃取过程为熵减过程。     

甲基膦酸二(1-甲基庚基)酯萃取金(Ⅲ)的紫外光谱研究

中性含磷萃取剂萃取贵金属已有报道.Tocher等研究了磷酸三丁酯(TBP)和三辛基氧膦(TOPO)对HAuCl_4和HAuBr_4的萃取,用分配比法测定了萃合物的组成为H_3O~+·3R·yH_2O…AuX_4~-.陈景等研究了TBP和烷基氧膦(TAPO)对铂族金属萃取,发现TBP萃取HIrCl_6时,IrCl_6~(2-)萃取前后的中心离子光谱没有发生变化;萃取H_2PtCl_6时,纯TBP及萃合物红外光谱中P=O的振动频率几乎无改变.由此推断,萃取剂未与被萃离子发生配位作用,而是形成了离子缔合物2(H~+·nTBP·yH_2O)…MCl_6~(2-).可见,这类萃取剂在萃取贵金属时,首     

溶剂萃取动力学的研究——Ⅲ.氯化铀酰在盐酸和磷酸三丁酯之间的传质过程

本文采用上升液滴法,研究了氯化铀酰在盐酸介质和磷酸三丁酯(TBP)之间的传质过程.在一定浓度的盐酸溶液中,TBP 萃取铀的速率与[U]和[TBP]_(0)~2成正比;反萃速率与[U]_(0)成正比,而与[TBP]_(0)成反比.在温度为20～40℃范围内分别测定了萃取和反萃反应的活化能,它们的差值与由萃取平衡分配比与温度关系测得的焓变相符.可以认为,萃合物 UO_2Cl_2·2TBP 的生成和离解都是分步进行的,中间产物是 UO_2Cl_2·TBP;萃取速率的控制步骤是 UO_2Cl_2·2TBP 的生成反应,而反萃速率的控制步骤是 UO_2Cl_2·TBP 的离解反应.     

萃取Fe3+和氨水-乙醇反萃沉淀法制备α-Fe2O3

以磷酸二异辛基酯(P204)为萃取剂,CCl4为溶剂,从Fe(NO3)2水溶液中萃取铁离子,以氨的乙醇溶液反萃含铁的有机相,通过优化控制相间传质过程,获得了Fe(OH)3前驱体,经煅烧后得α-Fe2O3粉体,采用TEM、FTIR、XRD等测试技术对α-Fe2O3进行表征。 研究表明,在油水相比为1∶1,水相c(Fe3+)=0.10 mol/L(pH=3.0)、油相P204为V(P204)∶V(CCl4)=1∶3、平衡时间为20 min,Fe3+萃取率达98.44%;反萃取溶液V(氨水)∶V(乙醇)=1∶7、陈化温度约10.0 ℃,制备纳米α-Fe2O3的煅烧温度为600 ℃较宜。     

HEH/EHP萃取剂中钍的反萃性能研究

研究了含钍HEH/EHP(2-乙基己基膦酸单-2-乙基己基脂)萃取剂中钍的反萃性能。采用HCl,HNO3和H2SO4三种矿物酸分别对钍进行了反萃试验研究,结果表明,当反萃酸浓度为[H+]=6 mol.L-1时,HCl和HNO3反钍率小于1%,而硫酸的反钍率接近69%,表明H2SO4是钍的有效反萃剂。以H2SO4作为反萃剂,研究了相比、反萃酸浓度、酸用量、萃取剂浓度及钍负载量对钍的反萃性能的影响。在此基础上,对钍的逆流反萃过程进行了研究,当起始酸浓度为7 mol.L-1时,分别采用1∶1和4∶1的相比进行3级逆流反萃,反萃率分别为92.10%和53.29%。     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Oxygen defect K2NiF4-type oxides: The compounds La2−xSrxCuO4−x2+δ

Oxygen defect K₂NiF₄-type oxides $\text{La}{}_{\mathrm{2?x}}\text{Sr}{}_{\mathrm{x}}\text{CuO}{}_{\mathrm{<mtext>4?</mtext><mtext>x</mtext><mtext>2</mtext><mtext>+\delta </mtext>}}$ have been synthesized for a wide composition range: 0 ≤ x ≤ 1.34. From the X-ray and electron diffraction study three domains have been characterized: orthorhombic compounds with La₂CuO₄ structure for 0 ≤ x < 0.10, tetragonal oxides similar to LaSrCuO₄ for 0.10 ≤ x < 1 and several superstructures derived from the tetragonal cell ( with n = 3, 4, 4.5, 5, 6) for 1 ≤ x ≤ 1.34. The compounds corresponding to 0 < x < 1 differ from the other oxides in that they are characterized by the presence of copper with two oxidation states: + 2 and + 3. A model structure for La_0.8Sr_1.2CuλO_3.4, in which copper has only the + 2 oxidation state, and for which the actual cell is tegragonal—a = 18.80₄ Å and c = 12.94 Å—has been established. The particular structural evolution of these compounds is discussed in terms of a competition between the capability of Cu(II) to be oxidized to Cu(III) and the ordering of oxygen vacancies.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

A study of the spinel materials LiTi2O4 and Li43Ti53O4 by photoelectron spectroscopy

HeI-excited valence-band ultraviolet photoelectron spectra and MgKα-excited Ti-2p X-ray photoelectron spectra are reported for the spinel materials LiTi₂O₄ and $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4$. The presence of a Fermi edge in the ultraviolet photoelectron spectrum of LiTi₂O₄ confirms the metallic nature of this material, although the measured density of states at the Fermi energy is much lower than that expected from an independent-electron interpretation of the magnetic susceptibility. This difference is attributed to a strong interaction of the conduction electrons with the lattice vibrations. The localization of conduction electrons that occurs in the final state in the Ti-2p X-ray photoelectron spectrum of LiTi₂O₄ is attributed to a Coulomb interaction with a core hole.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).