A novel fluorescent sensor for hydrophobic amines in aqueous solution

A novel fluorescent tweezer was designed and synthesised to sense hydrophobic amines in aqueous solution. Association of the guest was driven by both hydrophobic effect and electrostatic interactions, with the hydrophobic interactions being dominant. The affinity and selectivity of the sensor for amine-based stimulants are reported.     

Ratiometric fluorescent sensor for silver ion and its resultant complex for iodide anion in aqueous solution

In aqueous solution, sensor DQAg can selectively detect Ag(+) based on inhibition of the resonance, demonstrating a large hypsochromic shift of 84 nm and remarkable changes in the ratio (F(481 nm)/F(565 nm)) of the emission intensity (R/R(0) up to 26-fold). Furthermore, the resultant Ag-DQAg also displays a ratiometric and highly selective response to iodide anion over other anions due to the liberation of DQAg from the complex by precipitating AgI.     

A near-infrared fluorescent sensor for detection of cyanide in aqueous solution and its application for bioimaging

A new NIR fluorescent sensor based on an amine-substituted heptamethine cyanine dye displayed a highly selective fluorescence enhancement with cyanide in aqueous solutions, and was applied for the imaging of anthropogenic and biogenic cyanide.     

Pyrenoviologen-based fluorescent sensor for detection of picric acid in aqueous solution

Two highly emissive pyrenoviologen derivatives were synthesized and used to fabricate fluorescent sensors for detection of picric acid (PA) with good sensitivity and selectivity.     

Pyrenoviologen-based fluorescent sensor for detection of picric acid in aqueous solution

Two highly emissive pyrenoviologen derivatives were synthesized and used to fabricate fluorescent sensors for detection of picric acid(PA) with good sensitivity and selectivity.The sensitivity of the sensor was attributed to the specific electrostatic association effect of the cationic pyrenoviologens to the picrate anions,which also gave the sensor special selectivity among other compounds with similar structure.The electron transfer between them was attributed to the fluorescence response.Fluorescence lifetime measurements revealed that the quenching is static in nature.The novel and efficient pyrenoviologen derivatives-based sensors offered a strategy to fabricate real-life PA sensor.     

A polythiophene-derived ratiometric fluorescent sensor for highly sensitive determination of carbenicillin in aqueous solution

A new ratiometric fluorescent sensor based on a quaternized quinine substituted 3-phenylpolythiophene derivative (PTQ1) was designed and developed for facile and reliable detection of carbenicillin with high sensitivity and selectivity.     

A highly selective OFF-ON fluorescent sensor for zinc in aqueous solution and living cells

A novel compound, 2-p-tolyl-1H-imidazo[4,5-f][1,10]phenanthrolinium hydrogenselenite (HMPIP·HSeO(3), C1), shows a peculiar OFF-ON fluorescent response to Zn(2+) in aqueous solution and living cells.     

Tridentate lysine-based fluorescent sensor for Hg(II) in aqueous solution

A novel homoplastic podand fluorescent sensor based on flexible hydrophilic lysine was prepared. Lysine with two dansyl groups-appended at both ends supplied a possibility for a tridentate binding toward Hg(II) and finally resulted in a unique selectivity to Hg(II) over other transition-metal ions with a hypersensitivity (detection limit 2.0 nM) in neutral buffered aqueous solutions. Notably, the coordination of chloride ion to the complex of sensor-Hg(II) brought forth that the trend in the NMR chemical shift for hydrogen and carbon atoms of the sensor was contrary to the findings in the former reports, which shows upfield shifts for the hydrogens and the alkane carbons but downfield shifts for the dansyl carbons, respectively.     

A highly selective and sensitive fluorescent chemosensor for Hg2+ in neutral buffer aqueous solution

A selective and sensitive fluorescent chemosensor for Hg2+, which was composed of two aminonaphthalimide fluorophores and a receptor of 2,6-bis(aminomethyl)pyridine, was synthesized through the reaction of 2,6-bis(chloromethyl)pyridine and N-[2-(2-hydroxyethoxy)ethyl]-4-piperazino-1,8-naphthalimide. The chemosensor showed an about 17-fold increase in fluorescence quantum yield upon addition of 1 equiv of Hg2+ in neutral buffer aqueous solution, and the other common metal ions did not notably disturb the detection of Hg2+.     

Novel fluorescent sensor for detection of Cu(II) in aqueous solution

A novel fluorescent chemosensor based on aminonaphthol, which can selectively recognize copper(II) over other metal ions in aqueous solution within a broad pH span, was synthesized.     

Thermo and pH sensitive fluorescent polymer sensor for metal cations in aqueous solution

A new monomeric fluorophore N‐acryl‐N'‐(quinolin‐8‐yl)thiourea (AQT) was synthesized. Free radical copolymerization was carried out in order to prepare a water‐soluble fluorescent copolymer, based on N‐isopropylacrylamide. The fluorescent characteristic of the aqueous solutions of copolymers was investigated both in varied pH and in the presence of metal cations. The polymer‐ contained AQT was found to be a selective chemosensor for Ni, Pb, Co ions especially for Co ion. The obtained copolymers show thermo‐sensitive lower critical solution temperature (LCST) ranging from 32.5 to 37.5°C with varied ratios of AQT, N, N‐dimethylacrylamide and N‐isopropylamide. Copyright © 2007 John Wiley & Sons, Ltd.     

A highly selective fluorescent probe for pyrophosphate in aqueous solution

A new 4-amino-1,8-naphthalimide-based fluorescent chemosensor bearing a guanidiniocarbonyl pyrrole moiety has been synthesized. The sensor displays a selective fluorescent enhancement with pyrophosphate over ATP, ADP, AMP and other inorganic anions in aqueous solution.     

Selective metal ion recognition using a fluorescent 1,8-diquinolylnaphthalene-derived sensor in aqueous solution

The use of anti-1,8-bis(2,2′-diisopropyl-4,4′-diquinolyl)naphthalene, 1, for metal ion-selective fluorescence recognition has been investigated. Employing CuCl₂, ZnCl₂, FeCl₂, and FeCl₃ in fluorescence titration experiments of 1 revealed formation of a bluegreen light emitting bimetallic complex. A dramatic red-shift of the fluorescence maximum of 1 and metal ion-selective quenching was observed in the presence of Cu(II), Fe(II), and Fe(III)chlorides in acetonitrile. By contrast, addition of ZnCl₂ was found to result in fluorescence enhancement, whereas Cu(I) did not induce any significant fluorescence change of 1. The sensor was found to undergo highly ion-selective fluorescence quenching in aqueous solution. Screening of main group and transition metal ions showed excellent selectivity for FeCl₃ even in the presence of competing metal ions.     

Colorimetric sensor for ATP in aqueous solution

A new chromogenic complex 1.Zn has been synthesized, and its interactions with different biologically important phosphates have been investigated in aqueous solution (pH approximately 7.2). A visual color change can be detected on binding of ATP to 1.Zn, whereas no such change is observed when other biologically related anions (AMP, ADP, PPi, or Phosphate) are used. Complex 1.Zn can also be used as a staining agent for yeast cells allowing detection under normal light microscopy.     

Photochemistry of salicylate anion in aqueous solution

Photochemistry of the salicylate anion (HSA⁻) in aqueous solutions was studied by optical spectroscopy, fluorescence spectroscopy, and nanosecond laser flash photolysis (XeCl laser, 308 nm). Excitation of this species gives rise to the HSA⁻ triplet state, HSA^· radical, and hydrated electron. The last two species are presumably formed due to the absorption of the second photon by the excited singlet state of the anion. In a neutral medium, the main decay channel of the HSA⁻ triplet state is triplet-triplet (T-T) annihilation. The HSA^· radical decays in recombination, and the hydrated electron reacts mainly with the HSA⁻ anion. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1270–1276, July, 2007.     

A disaccharide rearrangement catalyzed by molybdate anion in aqueous solution

Reaction of a galactosylated 2-C-(hydroxymethyl)-tetrofuranose with paramolybdate ion-exchange resin in aqueous solution at 67 degrees C gave an equililibrium mixture containing the reactant aldofuranose (42%) and a 2-ketopentofuranose galactosylated at O1 (58%). Observation of this stereospecific rearrangement supports prior arguments that substituents at C2 of the branched-chain aldofuranose reactant are located in a sterically accessible pocket of the putative dimolybdate-saccharide reactive complex during epimerization. This rearrangement provides a new and convenient route to 2-ketosugars glycosylated at the exocyclic C1 position.     

A supramolecular optic receptor for selective recognition CDP in neutral aqueous solution

We designed and synthesized a Cu-coordination complex based on a seven-membered amide cycle and studied its binding ability with nucleotides (cytidine 5′-monophosphate (CMP), cytidine 5′-diphosphate (CDP), cytidine 5′-triphosphate (CTP), cytidine d-5′-monophosphate (dCMP), and thymidine d-5′-monophosphate (dTMP)) by UV-Vis spectroscopy. Results indicate that the compound shows the highest binding ability with CDP among the studied nucleotides and can selectively and strongly bind nucleotides in neutral aqueous solution. The compound can be used as optical receptor for the detection of CDP.     

Dynamic combinatorial optimization of a neutral receptor that binds inorganic anions in aqueous solution

A dynamic combinatorial library of potential anion receptors was generated from a cyclic peptide disulfide dimer and a series of dithiol spacers. Exposing the library to KI or K2SO4 led to the amplification of two new neutral receptors that bind anions through hydrogen bonding with up to micromolar affinity in aqueous solution. Thermodynamic studies suggest that these second-generation receptors outclass the previously described first-generation receptor, largely as a result of a more favorable enthalpy of binding. These results demonstrate that dynamic combinatorial optimization of designed hosts can be a powerful strategy, bringing synthetic receptors that approach the efficiencies of proteins one step closer.     

A high selective anion colorimetric sensor based on salicylaldehyde for fluoride in aqueous media

A new and simple salicylaldehyde-based sensor 1 designed for fluoride sensing has been investigated in DMSO and even in the 9/1 DMSO/H₂O (v/v) mixtures. The affinity constants of receptor 1 for anionic species in the 9/1 DMSO/H₂O (v/v) reveal that it is sensitive to F. Also, the color changes induced by anions can provide a way of detection by ‘naked-eye’. These result can be substantiated by the spectrum changes upon the addition of 25 equiv. anions to 1 in the 9/1 DMSO/H₂O solution. The further insights to the nature of interactions between the sensor 1 and F⁻ were investigated by ¹H NMR titration experiments in 9/1 DMSO-d₆/H₂O (v/v). In addition, the proposed binding mode between 1 and F⁻ was suggested.