Axial ligand and spin-state influence on the formation and reactivity of hydroperoxo-iron(III) porphyrin complexes

The present study focuses on the formation and reactivity of hydroperoxo-iron(III) porphyrin complexes formed in the [Fe(III)(tpfpp)X]/H(2)O(2)/HOO(-) system (TPFPP=5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin; X=Cl(-) or CF(3) SO(3)(-)) in acetonitrile under basic conditions at -15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high-spin [Fe(III)(tpfpp)(OOH)] and low-spin [Fe(III)(tpfpp)(OH)(OOH)] could be observed with the application of a low-temperature rapid-scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O-O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo- to heterolytic O-O bond cleavage is observed for high- [Fe(III)(tpfpp)(OOH)] and low-spin [Fe(III)(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron-rich porphyrin ligands, electron-deficient [Fe(III)(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe(III)(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)-oxo porphyrin π-cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.     

Kinetics and mechanism of the [Ru(III)(edta)(H2O)](-)-mediated oxidation of cysteine by H2O2

The kinetics and mechanism of the [Ru(III)(edta)(H(2)O)](-)-mediated oxidation of cysteine (RSH) by hydrogen peroxide (edta(4-) = ethylenediaminetetraacetate), were studied in detail as a function of both the hydrogen peroxide and cysteine concentrations at pH 5.1 and room temperature. The kinetic traces reveal clear evidence for a catalytic process in which hydrogen peroxide reacts directly with cysteine coordinated to the Ru(III)(edta) complex in the form of [Ru(III)(edta)SR](2-). A parallel process in which [Ru(III)(edta)(H(2)O)](-) first reacts with H(2)O(2) to produce [Ru(V)(edta)O](-) and subsequently oxidizes cysteine, is orders of magnitude slower than the [Ru(III)(edta)(H(2)O)](-)-mediated oxidation in which cysteine rapidly coordinates to [Ru(III)(edta)(H(2)O)](-) prior to the reaction with H(2)O(2). HPLC product analyses revealed the formation of cystine (RSSR) as major product along with cysteine sulfinic acid (RSO(2)H) in the reaction system, and established the catalytic role of [Ru(III)(edta)(H(2)O)](-). Simulations were performed to account for the rather complex kinetic traces in terms of the suggested reaction mechanism. The results of the simulations support the proposed reaction mechanism that involves the oxidation of coordinated cysteine to cysteine sulfenic acid (RSOH), which subsequently rapidly reacts with H(2)O(2) and RSH to form RSO(2)H and RSSR, respectively.     

Functional metal-porphyrazine derivatives and their polymers. VIII. Catalase-like activity of Fe(III)- and Co(II)-2,9,16,23-tetracarboxyphthalocyanine supported on poly(2-vinylpyridine-CO-styrene)

The decomposition reaction of hydrogen peroxide by Fe(III)- and Co(III)-2,9,16,23-tetracarboxyphthalocyanine supported on poly(2-vinylpyridine-CO-styrene) and the quaternized one, was studied at pH 7.0 in aqueous media. The kinetics of this reaction was also investigated at pH 7.0 by measuring the initial velocity V₀ of the increasing concentration of O₂ with a Warburg respirometer. The reaction proceeded according to the catalaselike mechanism. Fe(III)-2,9,16,23-tetracarboxyphthalocyanine supported on poly(2-vinylpyridine-CO-styrene) was a remarkably effective catalyst for a H₂O₂ decomposition reaction. The coordination sphere around the Fe(III)-phthalocyanine ring was characterized by electronic and ESR spectroscopy. Fe(III)-phthalocyanine supported on the copolymer dispersed in water was the five-coordinated, high-spin type. A typical competitive inhibition in respect of H₂O₂ by CN- was observed. ESR spectrum of this system showed the low spin iron(III) in the octahedral ligand field. The polymer coils hindered undesirable dimerization of metal-phthalocyanine molecules by the shielding effect.     

Mechanistic studies on peroxide activation by a water-soluble iron(III)-porphyrin: implications for O-O bond activation in aqueous and nonaqueous solvents

The reactions of a water-soluble iron(III)-porphyrin, [meso-tetrakis(sulfonatomesityl)porphyrinato]iron(III), [Fe(III)(tmps)] (1), with m-chloroperoxybenzoic acid (mCPBA), iodosylbenzene (PhIO), and H(2)O(2) at different pH values in aqueous methanol solutions at -35 degrees C have been studied by using stopped-flow UV/Vis spectroscopy. The nature of the porphyrin product resulting from the reactions with all three oxidants changed from the oxo-iron(IV)-porphyrin pi-cation radical [Fe(IV)(tmps(*+))(O)] (1(++)) at pH<5.5 to the oxo-iron(IV)-porphyrin [Fe(IV)(tmps)(O)] (1(+)) at pH>7.5, whereas a mixture of both species was formed in the intermediate pH range of 5.5-7.5. The observed reactivity pattern correlates with the E degrees' versus pH profile reported for 1, which reflects pH-dependent changes in the relative positions of E degrees'(Fe(IV)/Fe(III) ) and E degrees'(P(*+)/P) for metal- and porphyrin-centered oxidation, respectively. On this basis, the pH-dependent redox equilibria involving 1(++) and 1(+) are suggested to determine the nature of the final products that result from the oxidation of 1 at a given pH. The conclusions reached are extended to water-insoluble iron(III)-porphyrins on the basis of literature data concerning the electrochemical and catalytic properties of [Fe(III)(P)(X)] species in nonaqueous solvents. Implications for mechanistic studies on [Fe(P)]-catalyzed oxidation reactions are briefly addressed.     

Kinetics and mechanism of the iron phthalocyanine catalyzed reduction of nitrite by dithionite and sulfoxylate in aqueous solution

The reactions of sodium nitrite with sodium dithionite and sulfoxylate ion were studied in the presence of iron(III) tetrasulfophthalocyanine, Fe(III)(TSPc)3-, in aqueous alkaline solution. Kinetic parameters for the different reaction steps in the catalytic reduction by dithionite were determined. The final product of the reaction was found to be nitrous oxide. Contrary to this, the product of the catalytic reduction of nitrite by sulfoxylate was found to be ammonia. The striking difference in the reaction products is accounted for in terms of different structures of the intermediate complexes formed during the reduction by dithionite and sulfoxylate, in which nitrite is suggested to coordinate to the iron complex via nitrogen and oxygen, respectively. Sulfoxylate is shown to be a convenient reductant for the synthesis of the highly reduced iron phthalocyanine species Fe(I)(TSPc*)6- in aqueous solution. The kinetics of the reduction of Fe(I)(TSPc)5- to Fe(I)(TSPc*)6-, as well as the oxidation of the latter species by nitrite, was studied in detail.     

The study and application of biomimic peroxidase ferric 2-hydroxy-1-naphthaldehyde thiosemicarbazone (Fe(III)-HNT)

Ferric 2-hydroxy-1-naphthaldehyde thiosemicarbazone (Fe(III)-HNT) has been synthesized and used to mimic the active group of horseradish peroxidase (HRP). The catalytic characteristics of this mimic-enzyme catalyst in the oxidation reaction of ascorbic acid with hydrogen peroxide has been studied. The experimental results showed that this peroxidase model compound has similar catalytic activity that of HRP. The catalytic activity of Fe(III)-HNT has been compared with those of HRP and common mimic-enzymes, metalloporphyrins (e.g. metal tetrakis(sulphophenyl)porphyrin (Me-TPPS(4))). Though the catalytic activity of Fe(III)-HNT is 75% of that of HRP, it can be used as a new kind of mimic-enzyme catalyst in determination of trace H(2)O(2). By coupling this mimetic catalytic reaction with the catalytic reaction of glucose oxidase, glucose can be determined indirectly. Under experimental conditions the linear relationship between DeltaA(265) and glucose concentration was in the range of 2.0-40.0 mug ml(-1), The correlation coefficient (r) was 0.9996. The R.S.D. (P=0.05, n=6) was 0.24%. The detection limit was determined to be 0.238 mug ml(-1). It was applied successfully to the determination of glucose in normal human and diabetic urine. The values of determination by the proposed method were compared with those of a routine method (enzymic glucose determination) applied in an hospital clinical laboratory. The agreement was very good.     

The reaction of [Fe(pic)3] with hydrogen peroxide: a UV-visible and EPR spectroscopic study (Hpic = picolinic acid)

The Gif family of catalysts, based on an iron salt and O2 or H2O2 in pyridine, allows the oxygenation of cyclic saturated hydrocarbons to ketones and alcohols under mild conditions. The reaction between [Fe(pic)3] and hydrogen peroxide in pyridine under GoAgg(III)(Fe(III)/Hpic catalyst) conditions was investigated by UV-visible spectrophotometry. Reactions were monitored at 430 and 520 nm over periods ranging from a few minutes to several hours at 20 degrees C. A number of kinetically stable intermediates were detected, and their relevance to the processes involved in the assembly of the active GoAgg(III) catalyst was determined by measuring the kinetics in the presence and absence of cyclohexane. EPR measurements at 110 K using hydrogen peroxide and t-BuOOH as oxidants were used to further probe these intermediates. Our results indicate that in wet pyridine [Fe(pic)3] undergoes reversible dissociation of one picolinate ligand, establishing an equilibrium with [Fe(pic)2(py)(OH)]. Addition of aqueous hydrogen peroxide rapidly generates the high-spin complex [Fe(pic)2(py)(eta1-OOH)] from the labilised hydroxy species. Subsequently the hydroperoxy species undergoes homolysis of the Fe-O bond, generating HOO. and [Fe(pic)2(py)2], the active oxygenation catalyst.     

The reaction of [FeII(tpa)] with H2O2 in acetonitrile and acetone--distinct intermediates and yet similar catalysis

The reaction of [FeII(tpa)(OTf)2] (tpa=tris(2-pyridylmethyl)amine) and its related 5-Me3-tpa complex with hydrogen peroxide affords spectroscopically distinct iron(III)-peroxo intermediates in CH3CN and acetone. The reaction in acetonitrile at -40 degrees C results in the formation of the previously reported Fe(III)-OOH intermediate, the end-on hydroperoxo coordination mode of which is established in this paper by detailed resonance Raman isotope-labeling experiments. On the other hand, the reaction in acetone below -40 degrees C leads to the observation of a different peroxo intermediate identified by resonance Raman spectroscopy to be an FeIII-OOC (CH3)2OH species; this represents the first example of an intermediate derived from the adduct of H2O2 and acetone. The peroxoacetone intermediate decays more rapidly than the corresponding FeIII-OOH species and converts to an FeIV=O species by O-O bond homolysis. This decay process is analogous to that observed for [FeIII(tpa)(OOtBu)]2+ and in fact exhibits a comparable enthalpy of activation of 54(3) kJ mol(-1). Thus, with respect to their physical properties at low temperature, the peroxoacetone intermediate resembles [FeIII(tpa)(OOtBu)]2+ more than the corresponding FeIII-OOH species. At room temperature, however, the behavior of the Fe(tpa)/H2O2 combination in acetone in catalytic hydrocarbon oxidations differs significantly from that of the Fe(tpa)/tBuOOH combination and more closely matches that of the Fe(tpa)/H2O2 combination in CH3CN. Like the latter, the Fe(tpa)/H2O2 combination in acetone catalyzes the hydroxylation of cis-1,2-dimethylcyclohexane to its tertiary alcohol with high stereoselectivity and carries out the epoxidation and cis-dihydroxylation of olefins. These results demonstrate the subtle complexity of the Fe(tpa)/H2O2 reaction surface.     

A comparative mechanistic study of the reversible binding of NO to a water-soluble octa-cationic Fe(III) porphyrin complex

The water-soluble, non-mu-oxo dimer-forming porphyrin, [5,10,15,20-tetrakis-4'-t-butylphenyl-2',6'-bis-(N-methylene-(4'-t-butylpyridinium))porphyrinato]iron(III) octabromide, (P(8+))Fe(III), with eight positively charged substituents in the ortho positions of the phenyl rings, was characterized by UV-vis and 1H NMR spectroscopy and 17O NMR water-exchange studies in aqueous solution. Spectrophotometric titrations of (P(8+))Fe(III) indicated a pKa1 value of 5.0 for coordinated water in (P(8+))Fe(III)(H2O)2. The monohydroxo-ligated (P(8+))Fe(III)(OH)(H2O) formed at 5 < pH < 12 has a weakly bound water molecule that undergoes an exchange reaction, k(ex) = 2.4 x 10(6) s(-1), significantly faster than water exchange on (P(8+))Fe(III)(H2O)2, viz. k(ex) = 5.5 x 10(4) s(-1) at 25 degrees C. The porphyrin complex reacts with nitric oxide to yield the nitrosyl adduct, (P(8+))Fe(II)(NO+)(L) (L = H2O or OH-). The diaqua-ligated (P(8+))Fe(III)(H2O)2 binds and releases NO according to a dissociatively activated mechanism, analogous to that reported earlier for other (P)Fe(III)(H2O)2 complexes. Coordination of NO to (P(8+))Fe(III)(OH)(H2O) at high pH follows an associative mode, as evidenced by negative deltaS(double dagger)(on) and deltaV(double dagger)(on) values measured for this reaction. The observed ca. 10-fold decrease in the NO binding rate on going from six-coordinate (P(8+))Fe(III)(H2O)2 (k(on) = 15.1 x 10(3) M(-1) s(-1)) to (P(8+))Fe(III)(OH)(H2O) (k(on) = 1.56 x 10(3) M(-1) s(-1) at 25 degrees C) is ascribed to the different nature of the rate-limiting step for NO binding at low and high pH, respectively. The results are compared with data reported for other water-soluble iron(III) porphyrins with positively and negatively charged meso substituents. Influence of the porphyrin periphery on the dynamics of reversible NO binding to these (P)Fe(III) complexes as a function of pH is discussed on the basis of available experimental data.     

Ozonocatalytic decomposition of glyoxal and glyoxylic and formic acids in the presence of iron(III) ions

Rate constants of reactions of ozone with glyoxal, glyoxylic and formic acid in aqueous solutions at pH 1.5 were determined. It was shown that iron(III) in the form of ions accelerates oxidation of glyoxal and glyoxylic acid, but does not influence reaction between ozone and formic acid. It was established that the catalyst acts effectively if its concentration is comparable to the concentration of the oxidized substrate, the optimal stoichiometric ratio (Fe³⁺/substrate) being close to 1/3. The catalytic reaction mechanism was studied using a competitive chelate ligand, oxalic acid. We concluded that the catalytic activity of iron(III) in the investigated reaction was due to its ability to form chelate complexes in which the substrate was more easily oxidized by molecular ozone.     

Kinetics of hydrogen peroxide decomposition with complexed and “free” iron catalysts

The hydrogen peroxide decomposition kinetics were investigated for both “free” iron catalyst [Fe(II) and Fe(III)] and complexed iron catalyst [Fe(II) and Fe(III)] complexed with DTPA, EDTA, EGTA, and NTA as ligands (L). A kinetic model for free iron catalyst was derived assuming the formation of a reversible complex (Fe–HO₂), followed by an irreversible decomposition and using the pseudo‐steady‐state hypothesis (PSSH). This resulted in a first‐order rate at low H₂O₂ concentrations and a zero order rate at high H₂O₂ concentrations. The rate constants were determined using the method of initial rates of hydrogen peroxide decomposition. Complexed iron catalysts extend the region of significant activity to pH 2–10 vs. 2–4 for Fenton's reagent (free iron catalyst). A rate expression for Fe(III) complexes was derived using a mechanism similar to that of free iron, except that a L–Fe–HO₂ complex was reversibly formed, and subsequently decayed irreversibly into products. The pH plays a major role in the decomposition rate and was incorporated into the rate law by considering the metal complex specie, that is, EDTA–Fe–H, EDTA–Fe–(H₂O), EDTA–Fe–(OH), or EDTA–Fe–(OH)₂, as a separate complex with its unique kinetic coefficients. A model was then developed to describe the decomposition of H₂O₂ from pH 2–10 (initial rates = 1 × 10⁻⁴ to 1 × 10⁻⁷ M/s). In the neutral pH range (pH 6–9), the complexed iron catalyzed reactions still exhibited significant rates of reaction. At low pH, the Fe(II) was mostly uncomplexed and in the free form. The rate constants for the Fe(III)–L complexes are strongly dependent on the stability constant, K_ML, for the Fe(III)–L complex. The rates of reaction were in descending order NTA > EGTA > EDTA > DTPA, which are consistent with the respective log K_MLs for the Fe(III) complexes. Because the method of initial rates was used, the mechanism does not include the subsequent reactions, which may occur. For the complexed iron systems, the peroxide also attacks the chelating agent and by‐product‐complexing reactions occur. Accordingly, the model is valid only in the initial stages of reaction for the complexed system. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 24–35, 2000     

XAS characterization of end-on and side-on peroxoiron(III) complexes of the neutral pentadentate N-donor ligand N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine

Peroxo intermediates are implicated in the catalytic cycles of iron enzymes involved in dioxygen metabolism. X-ray absorption spectroscopy has been used to gain insight into the iron coordination environments of the low-spin complex [Fe(III)(Me-TPEN)(eta(1)-OOH)](2+)(1) and the high-spin complex [Fe(III)(Me-TPEN)(eta(2)-O(2))](+)(2)(the neutral pentadentate N-donor ligand Me-TPEN =N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine) and obtain metrical parameters unavailable from X-ray crystallography. The complexes exhibit relatively large pre-edge peak areas of approximately 15 units, indicative of iron centers with significant distortions from centrosymmetry. These distortions result from the binding of peroxide, either end-on hydroperoxo for 1 (r(Fe-O)= 1.81A) or side-on peroxo for 2 (r(Fe-O)= 1.99 A). The XAS analyses of 1 strongly support a six-coordinate low-spin iron(III) center coordinated to five nitrogen atoms from Me-TPEN and one oxygen atom from an end-on hydroperoxide ligand. However, the XAS analyses of 2 are not conclusive: Me-TPEN can act either as a pentadentate ligand to form a seven-coordinate peroxo complex, which has precedence in the DFT geometry optimization of [Fe(III)(N4Py)(eta(2)-O(2))](+)(the neutral pentadentate N-donor ligand N4Py =N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), or as a tetradentate ligand with a dangling pyridylmethyl arm to form a six-coordinate peroxo complex, which is precedented by the crystal structure of [Fe(2)(III)(Me-TPEN)(2)(Cl)(2)(mu-O)](2+).     

Reaction of [RuIII(edta)(H2O)]- with H2O2 in aqueous solution. Kinetic and mechanistic investigation

The reaction of [Ru(III)(edta)(H(2)O)](-) (1) (edta = ethylenediaminetetraacetate) with hydrogen peroxide was studied kinetically as a function of [H(2)O(2)], temperature (5-35 degrees C) and pressure (1-1300 atm) at a fixed pH of 5.1 using stopped-flow techniques. The reaction was found to consist of two steps involving the rapid formation of a [Ru(III)(edta)(OOH)](2-) intermediate which subsequently undergoes parallel heterolytic and homolytic cleavage to produce [(edta)Ru(V)=O](-) (45%) and [(edta)Ru(IV)(OH)](-) (55%), respectively. The water soluble trap, 2,2'-azobis(3-ethylbenzithiazoline-6-sulfonate) (ABTS), was employed to substantiate the mechanistic proposal. Reactions were carried out under pseudo-first conditions for [ABTS] > [HOBr] > [1], and were monitored as a function of time for the formation of the one-electron oxidation product ABTS* (+). A detailed mechanism in agreement with the rate and activation parameters is presented, and the results are discussed with reference to data reported for the corresponding [Fe(III)(edta)(H(2)O)](-)/H(2)O(2) system.     

Comparative study of metal-porphyrins, -porphyrazines,and -phthalocyanines

A theoretical comparative study of complexes of porphyrin (P), porphyrazine (Pz), and phthalocyanine (Pc) with metal (M) = Fe, Co, Ni, Cu, and Zn has been carried out using a DFT method. The calculations provide a clear elucidation of the ground states for the MP/Pz/Pc molecules and for a series of [MP/Pz/Pc](x-) and [MP/Pz/Pc](y+) ions (x = 1, 2, 3, 4; y = 1, 2). There are significant differences among MP, MPz, and MPc in the electronic structure and other calculated properties. For FeP/Pz and CoP/Pz, the first oxidation occurs at the central metal, while it is the macroring of FePc and CoPc that is the site of oxidation. The smaller coordination cavity results in a stronger ligand field in Pz than in P. However, the benzo annulation produces a surprisingly strong destabilizing effect on the metal-macrocycle bonding. The effects of Cl axial bonding upon the electronic structures of the iron(III) complexes of P, Pz, and Pc were examined, as was the bonding of pyridine (py) to NiP, NiPz, and NiPc. The porphinato core size plays a crucial role in controlling the spin state of Fe(III) in these complexes. FePc(Cl) is predicted to be a pure intermediate-spin system, whereas NiPz(py)(2) and NiPc(py)(2) are metastable in high-spin (S = 1) states. The NiPz/Pc-(py)(2) binding energy curve has only a shallow well that facilitates decomposition of the complex. The NiP-(py)(2) bond energy is small, but the relatively deep well in the binding energy curve ought to make this system stable to decomposition.     

2:2 Fe(III):ligand and "adamantane core" 4:2 Fe(III):ligand (hydr)oxo complexes of an acyclic ditopic ligand

A bis-hydroxo-bridged diiron(III) complex and a bis-mu-oxo-bis-mu-hydroxo-bridged tetrairon(III) complex are isolated from the reaction of 2,6-bis((N,N'-bis-(2-picolyl)amino)methyl)-4-tert-butylphenol (Hbpbp) with iron perchlorate in acidic and neutral solutions respectively. The X-ray structure of the dinuclear complex [{(Hbpbp)Fe([mu-OH)}(2)](ClO(4))(4).2C(3)H(6)O (1.2C3H6O) shows that only one of the metal-binding cavities of each ligand is occupied by an iron(III) atom and two [Fe(Hbpbp)]3+ units are linked together by two hydroxo bridging groups to form a [Fe(III)-(mu-OH)](2) rhomb structure with Fe...Fe = 3.109(1)A. The non-coordinated tertiary amine of Hbpbp is protonated. Magnetic susceptibility measurements show a well-behaved weak antiferromagnetic coupling between the two Fe(III) atoms, J= -8 cm(-1). The tetranuclear complex [(bpbp)(2)Fe(4)(mu-O)(2)(mu-OH)(2)](ClO(4))(4)(2) was isolated as two different solvates .4CH(3)OH and .6H(2)O with markedly different crystal morphologies at pH ca. 6. Complex .4CH(3)OH forms red cubic crystals and .6H(2)O forms green crystalline platelets. The Fe(4)O(6) core of shows an adamantane-like structure: The six bridging oxygen atoms are provided by the two phenolato groups of the two bpbp(-) ligands, two bridging oxo groups and two bridging hydroxo groups. The hydroxo and oxo ligands could be distinguished on the basis of Fe-O bond lengths of the two different octahedral iron sites: Fe-mu-OH, 1.953(5), 2.013(5)A and Fe-mu-O, 1.803(5), 1.802(5)A. The difference in ligand environment is too small for allowing Mossbauer spectroscopy to distinguish between the two crystallographically independent Fe sites. The best fit to the magnetic susceptibility of .4CH(3)OH was achieved by using three coupling constants J(Fe-OPh-Fe)= 2.6 cm(-1), J(Fe-OH-Fe)=-0.9 cm(-1), J(Fe-O-Fe)=-101 cm(-1) and iron(III) single ion ZFS (|D|= 0.15 cm(-1)).     

Synthetic models for the cysteinate-ligated non-heme iron enzyme superoxide reductase: observation and structural characterization by XAS of an Fe(III)-OOH intermediate

Superoxide reductases (SORs) belong to a new class of metalloenzymes that degrade superoxide by reducing it to hydrogen peroxide. These enzymes contain a catalytic iron site that cycles between the Fe(II) and Fe(III) states during catalysis. A key step in the reduction of superoxide has been suggested to involve HO(2) binding to Fe(II), followed by innersphere electron transfer to afford an Fe(III)-OO(H) intermediate. In this paper, the mechanism of the superoxide-induced oxidation of a synthetic ferrous SOR model ([Fe(II)(S(Me2)N(4)(tren))](+) (1)) to afford [Fe(III)(S(Me2)N(4)(tren)(solv))](2+) (2-solv) is reported. The XANES spectrum shows that 1 remains five-coordinate in methanolic solution. Upon reaction of 1 with KO(2) in MeOH at -90 degrees C, an intermediate (3) is formed, which is characterized by a LMCT band centered at 452(2780) nm, and a low-spin state (S = 1/2), based on its axial EPR spectrum (g(perpendicular) = 2.14; g(parallel) = 1.97). Hydrogen peroxide is detected in this reaction, using both (1)H NMR spectroscopy and a catalase assay. Intermediate 3 is photolabile, so, in lieu of a Raman spectrum, IR was used to obtain vibrational data for 3. At low temperatures, a nu(O-O) Fermi doublet is observed in the IR at 788(2) and 781(2) cm(-)(1), which collapses into a single peak at 784 cm(-1) upon the addition of D(2)O. This vibrational peak diminishes in intensity over time and essentially disappears after 140 s. When 3 is generated using an (18)O-labeled isotopic mixture of K(18)O(2)/K(16)O(2) (23.28%), the vibration centered at 784 cm(-1) shifts to 753 cm(-1). This new vibrational peak is close to that predicted (740 cm(-1)) for a diatomic (18)O-(18)O stretch. In addition, a nu(O-O) vibrational peak assigned to free hydrogen peroxide is also observed (nu(O-O) = 854 cm(-1)) throughout the course of the reaction between Fe(II)-1 and superoxide and is strongest after 100 s. XAS studies indicate that 3 possesses one sulfur scatterer at 2.33(2) A and four nitrogen scatterers at 2.01(1) A. Addition of two Fe-O shells, each containing one oxygen, one at 1.86(3) A and one at 2.78(3) A, improved the EXAFS fits, suggesting that 3 is an end-on peroxo or hydroperoxo complex, [Fe(III)(S(Me2)N(4)(tren))(OO(H))](+). Upon warming above -50 degrees C, 3 is converted to 2-MeOH. In methanol and methanol:THF (THF = tetrahydrofuran) solvent mixtures, 2-MeOH is characterized by a LMCT band at lambda(max) = 511(1765) nm, an intermediate spin-state (S = 3/2), and, on the basis of EXAFS, a relatively short Fe-O bond (assigned to a coordinated methanol or methoxide) at 1.94(10) A. Kinetic measurements in 9:1 THF:MeOH at 25 degrees C indicate that 3 is formed near the diffusion limit upon addition of HO(2) to 1 and converts to 2-MeOH at a rate of 65(1) s(-1), which is consistent with kinetic studies involving superoxide oxidation of the SOR iron site.     

Spectrophotometric studies on ion-pair extraction equilibria of the iron(ii) and iron(III) complexes with 4-(2-pyridylazo)resorcinol

The ion-pair extraction equilibria of the iron(II) and iron(III) chelates of 4-(2-pyridylazo)resorcinol (PAR, H(2)L) are described. The anionic chelates were extracted into chloroform with benzyldimethyltetradecylammonium chloride (QC1) as counter-ion. The extraction constants were estimated to be K(ex1)(Fe(II)) = [Q{Fe(II)(HL)L}](0)/[Q(+)][{Fe(II)(HL)L}(-)] = 10(8.59 +/- 0.11), K(ex2)(Fe(II)) = [Q(2){Fe(II)L(2)}](o)/ [Q(+)](2)[{Fe(II)L(2)}(2-)] = 10(12.17 +/- 0.10) and K(ex1)(Fe(III)) = [Q{Fe((III))L(2)}](o)/(Q(+)][{Fe(III)L(2)}(-)] = 10(6.78 +/- 0.15) at I = 0.10 and 20 degrees , where [ ](o) is concentration in the chloroform phase. Aggregation of Q{Fe(III)L(2)} in chloroform was observed and the dimerization constant (K(d) = [Q(2){Fe(III)L(2)}(2)](o)/[Q{Fe(III)L(2)}](o)(2)) was evaluated as log K(d) = 4.3 +/- 0.3 at 20 degrees . The neutral chelates of {Fe(II)(HL)(2)} and {Fe(III)(HL)L}, and the ion-pair of the cationic chelate, {Fe(III)(HL)(2)}ClO(4), were also extracted into chloroform or nitrobenzene. The relationship between the forms and extraction properties of the iron(II) and iron(III) PAR chelates are discussed in connection with those of the nickel(II) and cobalt(III) complexes. Correlation between the extraction equilibrium data and the elution behaviour of some PAR chelates in ion-pair reversed-phase partition chromatography is also discussed.     

Ligand substitution kinetics of the iron(III) hydroxo dimer with simple inorganic ligands

The kinetics and mechanisms of ligand substitution reactions of the iron(III) hydroxo dimer, Fe(2)(mu-OH)(2)(H(2)O)(8)(4+), with various inorganic ligands were studied by the stopped-flow method at 10.0 or 25.0 C in 1.0 M NaClO(4). The transient formation of the following di- and tetranuclear complexes was confirmed: Fe(2)(OH)SO(4)(3+), Fe(2)(OH)H(2)PO(2)(4+), Fe(2)(OH)HPO(3)(3+), Fe(2)(OH)SeO(3)(3+), and Fe(4)(AsO(4))(OH)(2)(7+). The catalytic effect of arsenic(III) on the hydrolytic reaction of iron(III) was also attributed to the formation of a dinuclear complex at very low concentration levels. Fast formation and subsequent dissociation of the multinuclear species into the corresponding mononuclear complexes (FeL) proceed via parallel reaction paths which, in general, show composite pH dependencies. The appropriate rate laws were established. The reactions of the different ligands occur at very similar rates, though the uninegatively charged singly deprotonated form reacts about 1 order of magnitude faster than the neutral form of the same ligand. The results can conveniently be interpreted in terms of a dissociative interchange mechanism which postulates the formation of an intermediate complex in which the ligand is coordinated to only one Fe(III) center of the hydroxo dimer. In a subsequent fast step, the ligand forms a bridge between the two metal ions by replacing one of the OH groups. The dissociation of the dinuclear complex into FeL most likely proceeds via the same intermediate.     

Formation of a heteronuclear hydrolysis complex in the Th(IV)-Fe(III) system

The speciation in the mixed Th(IV)-Fe(III) system has been studied in aqueous solution in the pH range of 2.0-4.8. In the individual systems iron(III) and thorium(IV) hydrolyze easily and hydrolysis products precipitate at approximately pH ≥ 2.0 and 4.0, respectively, at the metal concentrations used in this study, 0.02-0.05 mol dm(-3). In the mixed Th(IV)-Fe(III) system precipitation of ferrihydrite takes place after months of storage at low pH values, 2.0 (six-line ferrihydrite) and 2.3 (two-line ferrihydrite), as identified by X-ray powder diffraction. In the pH range 2.9-4.5 no precipitation was observed after 24 months. Two thorium(IV)-iron(III) solutions with pH = 2.9, C(Th) = 0.02 and 0.05 mol dm(-3) and C(Fe) = 0.02 mol dm(-3), were studied by extended X-ray absorption fine structure, EXAFS, using the Fe K and Th L(3) edges, and a third solution with pH = 2.9 and C(Th) = C(Fe) = 0.40 mol dm(-3) by large angle X-ray scattering, LAXS, to determine the structure of the predominating species. A heteronuclear hydrolysis complex with the composition [Th(2)Fe(2)(μ(2)-OH)(8)(H(2)O)(12)](6+) is proposed to form in solution, with Th···Th, Th···Fe and Fe···Fe distances of 3.94(2) and 3.96(2), 3.41(3) and 3.43(2), 3.04(2) and 3.02(4) ?, as determined by EXAFS and LAXS, respectively.     

Imidazole and imidazolate iron complexes: on the way for tuning 3D-structural characteristics and reactivity. Redox interconversions controlled by protonation state

X-ray structures for six Fe(II) and Fe(III) complexes from two closely heptadentate N-tripodal ligands, L1H(3) = tris[(imidazol-4-yl)-3-aza-3-butenyl]amine and L2H(3) = tris[(imidazol-2-yl)-3-aza-3-butenyl]amine, are described: three complexes in the L1 series (namely, [Fe(II)(L1H(3))](2+) and [Fe(III)(L1H(3))](3+) at low pH and [Fe(III)(L1)](0) at high pH) and three complexes in the L2 series (namely, [Fe(II)(L2H(3))](2+) at low pH and [Fe(II)(L2H)](0) and [Fe(III)(L2)](0) at high pH). Most of these complexes are stable in both Fe(II) and Fe(III) redox states and with the ligand in various protonation states. In the solid state, hydrogen bonds networks were obtained. Structural differences induced by 2- or 4-imidazole substitution are described and discussed. In solution, interconversions between different forms, with regard to oxidation and protonation states, were investigated by UV-visible spectroscopy, cyclic voltammetry, and potentiometry. The deprotonation pattern of these polyimidazole iron(II) and iron(III) complexes is described in detail. pK(a)s of the imidazolate/imidazole moieties in MeOH/H(2)O are reported. Two new species, namely, [Fe(II)(L1)](-) and [Fe(II)(L2)](-), were shown to be obtained in DMSO upon strong base addition and characterized by UV-vis spectroscopy and cyclic voltammetry. Half-wave potentials of Fe(III)/Fe(II) complexes with ligand moieties in several protonation states are reported, both in DMSO and in MeOH/H(2)O. Because of the presence of free imidazole groups coordinated to the iron, the potential of the iron(III)/iron(II) couples can be tuned by pH. A shift of DeltaE = E(deprot) - E(prot) ranging from -270 to -320 mV per exchanged proton in DMSO was measured. This study shows moreover that interconversions (with regard to both redox and protonation states) can be reversed several times. As the complexes have been isolated in order to be tested as superoxide dismutase mimics, preliminary reactions with dioxygen and with superoxide, considered as oxidant and reducer of biological importance, are reported. In these two series, O(2)(-) behaves either as a base or as a reducer and no adducts have been observed.