Kinetics and mechanisms of the oxidation of iodide and bromide in aqueous solutions by a trans-dioxoruthenium(VI) complex

The kinetics and mechanisms of the oxidation of I (-) and Br (-) by trans-[Ru (VI)(N 2O 2)(O) 2] (2+) have been investigated in aqueous solutions. The reactions have the following stoichiometry: trans-[Ru (VI)(N 2O 2)(O) 2] (2+) + 3X (-) + 2H (+) --> trans-[Ru (IV)(N 2O 2)(O)(OH 2)] (2+) + X 3 (-) (X = Br, I). In the oxidation of I (-) the I 3 (-)is produced in two distinct phases. The first phase produces 45% of I 3 (-) with the rate law d[I 3 (-)]/dt = ( k a + k b[H (+)])[Ru (VI)][I (-)]. The remaining I 3 (-) is produced in the second phase which is much slower, and it follows first-order kinetics but the rate constant is independent of [I (-)], [H (+)], and ionic strength. In the proposed mechanism the first phase involves formation of a charge-transfer complex between Ru (VI) and I (-), which then undergoes a parallel acid-catalyzed oxygen atom transfer to produce [Ru (IV)(N 2O 2)(O)(OHI)] (2+), and a one electron transfer to give [Ru (V)(N 2O 2)(O)(OH)] (2+) and I (*). [Ru (V)(N 2O 2)(O)(OH)] (2+) is a stronger oxidant than [Ru (VI)(N 2O 2)(O) 2] (2+) and will rapidly oxidize another I (-) to I (*). In the second phase the [Ru (IV)(N 2O 2)(O)(OHI)] (2+) undergoes rate-limiting aquation to produce HOI which reacts rapidly with I (-) to produce I 2. In the oxidation of Br (-) the rate law is -d[Ru (VI)]/d t = {( k a2 + k b2[H (+)]) + ( k a3 + k b3[H (+)]) [Br (-)]}[Ru (VI)][Br (-)]. At 298.0 K and I = 0.1 M, k a2 = (2.03 +/- 0.03) x 10 (-2) M (-1) s (-1), k b2 = (1.50 +/- 0.07) x 10 (-1) M (-2) s (-1), k a3 = (7.22 +/- 2.19) x 10 (-1) M (-2) s (-1) and k b3 = (4.85 +/- 0.04) x 10 (2) M (-3) s (-1). The proposed mechanism involves initial oxygen atom transfer from trans-[Ru (VI)(N 2O 2)(O) 2] (2+) to Br (-) to give trans-[Ru (IV)(N 2O 2)(O)(OBr)] (+), which then undergoes parallel aquation and oxidation of Br (-), and both reactions are acid-catalyzed.     

Separation and determination of selenium in rocks, marine sediments and plankton by direct evolution with the bromide-condensed phosphoric acid reagent

A new method is presented for the quantitative separation and determination of selenium by direct evolution with the bromide-condensed phosphoric acid reagent (Br(-)-CPA) from rocks, marine sediments and plankton. In the reaction with the Br(-1)-CPA, selenium(IV) and (VI) in the solid samples are evolved as selenium tetrabromide, and can be collected in an absorbing solution of 0.3M hydrochloric acid and 06M perchloric add (1:1), and then determined spectrophotometrically with 4-substituted o-phenylenediamines followed by the extraction of the resulting 5-substituted piazselenol into toluene. Elemental selenium and selenide do not react with the Br(-)-CPA, but can be determined after oxidation to selenite with potassium iodate. Therefore, successive distillations, the first with Br(-)-CPA and the second with IO(3)(-)-Br(-)-CPA, give a satisfactory means of diflerential determination of selenium(IV) and (VI), and elemental selenium and selenide. This method can be successfully applied for the separation of selenium in the neutron-activation analysis of standard rock samples, marine sediments and plankton, giving good and reliable results.     

Laser flash photolysis generation and kinetic studies of porphyrin-manganese-oxo intermediates. Rate constants for oxidations effected by porphyrin-Mn(V)-oxo species and apparent disproportionation equilibrium constants for porphyrin-Mn(IV)-oxo species

Porphyrin-manganese(V)-oxo and porphyrin-manganese(IV)-oxo species were produced in organic solvents by laser flash photolysis (LFP) of the corresponding porphyrin-manganese(III) perchlorate and chlorate complexes, respectively, permitting direct kinetic studies. The porphyrin systems studied were 5,10,15,20-tetraphenylporphyrin (TPP), 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPFPP), and 5,10,15,20-tetrakis(4-methylpyridinium)porphyrin (TMPyP). The order of reactivity for (porphyrin)Mn(V)(O) derivatives in self-decay reactions in acetonitrile and in oxidations of substrates was (TPFPP) > (TMPyP) > (TPP). Representative rate constants for reaction of (TPFPP)Mn(V)(O) in acetonitrile are k = 6.1 x 10(5) M(-1) s(-1) for cis-stilbene and k = 1.4 x 10(5) M(-1) s(-1) for diphenylmethane, and the kinetic isotope effect in oxidation of ethylbenzene and ethylbenzene-d(10) is k(H)/k(D) = 2.3. Competitive oxidation reactions conducted under catalytic conditions display approximately the same relative rate constants as were found in the LFP studies of (porphyrin)Mn(V)(O) derivatives. The apparent rate constants for reactions of (porphyrin)Mn(IV)(O) species show inverted reactivity order with (TPFPP) < (TMPyP) < (TPP) in reactions with cis-stilbene, triphenylamine, and triphenylphosphine. The inverted reactivity results because (porphyrin)Mn(IV)(O) disproportionates to (porphyrin)Mn(III)X and (porphyrin)Mn(V)(O), which is the primary oxidant, and the equilibrium constants for disproportionation of (porphyrin)Mn(IV)(O) are in the order (TPFPP) < (TMPyP) < (TPP). The fast comproportionation reaction of (TPFPP)Mn(V)(O) with (TPFPP)Mn(III)Cl to give (TPFPP)Mn(IV)(O) (k = 5 x 10(8) M(-1) s(-1)) and disproportionation reaction of (TPP)Mn(IV)(O) to give (TPP)Mn(V)(O) and (TPP)Mn(III)X (k approximately 2.5 x 10(9) M(-1) s(-1)) were observed. The relative populations of (porphyrin)Mn(V)(O) and (porphyrin)Mn(IV)(O) were determined from the ratios of observed rate constants for self-decay reactions in acetonitrile and oxidation reactions of cis-stilbene by the two oxo derivatives, and apparent disproportionation equilibrium constants for the three systems in acetonitrile were estimated. A model for oxidations under catalytic conditions is presented.     

Investigation of pyrite oxidation by hexavalent chromium: solution species and surface chemistry

Pyrite oxidation processes by aqueous Cr(VI) were investigated at 25 degrees C under an argon atmosphere. Synthetic pyrite suspensions (6 g L(-1)) were reacted for 20 h with a range of Cr(VI) solutions from 0 to 700 microM and at pH 2-12. The main objective of this work was to investigate the reaction mechanisms by emphasizing the role of sulfur species. Aqueous chemical processes were well illustrated in acidic media where significant amounts of sulfate and iron species were determined. Sulfate anions are the final stable sulfur species involved in the reaction pathway. Experiments showing complete Cr(VI) removal from solution displayed ratios [S(VI)]/[Fe](tot)<2, probably due to a deficit in aqueous sulfur species. Experiments showing incomplete Cr(VI) removal displayed ratios [Cr(VI)](removed)/[S(VI)] close to 1.5. This ratio was found to be consistent with the formation of thiosulfate (S(2)O(2-)(3)). Thiosulfate ions disproportionated into elemental sulfur S(0) and tetrathionate ions (S(4)O(2-)(6)) that were finally oxidized to sulfate anions under acidic conditions. The distribution of the oxidation state of sulfur atoms at the pyrite surface determined by XPS was additional evidence for the multistep sulfur oxidation process. The presence of elemental sulfur in the S(2p) spectra correlated well with the disproportion of thiosulfate under acidic conditions.     

Reactivity of dioxoosmium(VI) porphyrins toward arylhydrazine. Isolation of hydrazidoosmium and amidoosmium porphyrins

Reactions of dioxoosmium(VI) porphyrins [Os(VI)(Por)O(2)] with excess 1,1-diphenylhydrazine in tetrahydrofuran at ca. 55 degrees C for 15 min afforded bis(hydrazido(1-))osmium(IV) porphyrins [Os(IV)(Por)(NHNPh(2))(2)] (1a, Por = TPP (meso-tetraphenylporphyrinato dianion); 1b, Por = TTP (meso-tetrakis(p-tolyl)porphyrinato dianion)), hydroxo(amido)osmium(IV) porphyrins [Os(IV)(Por)(NPh(2))(OH)] (2a, Por = TPP; 2b, Por = TTP), and bis(hydrazido(2-))osmium(VI) porphyrin [Os(VI)(Por)(NNPh(2))(2)] (3c, Por = TMP (meso-tetramesitylporphyrinato dianion)). The same reaction under harsher conditions (in refluxing tetrahydrofuran for ca. 1 h) gave a nitridoosmium(VI) porphyrin, [Os(VI)(Por)(N)(OH)] (4b, Por = TTP). Oxidation of 1a,b with bromine in dichloromethane afforded bis(hydrazido(2-)) complexes [Os(VI)(TPP)(NNPh(2))(2)] (3a) and [Os(VI)(TTP)(NNPh(2))(2)] (3b), respectively. All the new osmium porphyrins were identified by (1)H NMR, IR, and UV-vis spectroscopy and mass spectrometry; the structure of 2b was determined by X-ray crystallography (Os-NPh(2) = 1.944(6) A, Os-OH = 1.952(5) A).     

Determination of iodine and bromine compounds in foodstuffs by CE-inductively coupled plasma MS

A CE-inductively coupled plasma mass spectrometric (CE-ICP-MS) method for iodine and bromine speciation analysis is described. Samples containing ionic iodine (I(-) and IO(3)(-)) and bromine (Br(-) and BrO(3)(-)) species are subjected to electrophoretic separation before injection into the microconcentric nebulizer (CEI-100). The separation has been achieved in a 50 cm length x 75 microm id fused-silica capillary. The electrophoretic buffer used is 10 mmol/L Tris (pH 8.0), while the applied voltage is set at -8 kV. Detection limits are 1 and 20-50 ng/mL for various I and Br compounds, respectively, based on peak height. The RSD of the peak areas for seven injections of 0.1 microg/mL I(-), IO(3)(-) and 1 microg/mL Br(-), BrO(3)(-) mixture is in the range of 3-5%. This method has been applied to determine various iodine and bromine species in NIST SRM 1573a Tomato Leaves reference material and a salt and seaweed samples obtained locally. A microwave-assisted extraction method is used for the extraction of these compounds. Over 87% of the total iodine and 83% of the total bromine are extracted using a 10% m/v tetramethylammonium hydroxide (TMAH) solution in a focused microwave field within a period of 10 min. The spike recoveries are in the range of 94-105% for all the determinations. The major species of iodine and bromine in tomato leaves, salt, and seaweed are Br(-), IO(3)(-), I(-), and Br(-), respectively.     

Solvent-free aerobic oxidation of n-alkane by iron(III)-substituted polyoxotungstates immobilized on SBA-15

The tetrairon(III)-substituted polytungstates [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](n-) (n = 6, X = As(III), Sb(III); n = 4, X = Se(IV), Te(IV)) were immobilized on (3-aminopropyl)triethoxysilane-modified SBA-15 and showed an excellent catalytic performance for solvent-free aerobic oxidation of long-chain n-alkanes using air as the oxidant under ambient conditions through a classical free-radical chain autoxidation mechanism.     

Fast catalytic hydroxylation of hydrocarbons with ruthenium porphyrins

Ruthenium porphyrin complexes such as carbonylruthenium(II) tetrakispentafluorophenylporphyrin [Ru(II)(TPFPP)(CO)] were found to be efficient catalysts for the hydroxylation of alkanes in the presence of 2,6-dichloropyridine N-oxide as the oxidant under mild, nonacidic conditions. Up to 14 800 turnovers (TO) and rates of 800 TO/min were obtained for the hydroxylation of adamantane. The hydroxylation of cis-decalin afforded cis-9-decalol and cis-decalin-9,10-diol, exclusively, thus, excluding a long-lived radicals mechanism. The kinetics of product evolution in a typical catalytic oxygenation showed an initial induction period followed by a fast, apparently zero-order phase with maximum rates and high efficiencies. Deuterium isotope effects (kH/kD) in the range of 4.2-6.4 were found for the hydroxylation of alkanes. A Hammett treatment of the data for the oxidation of para-substituted toluene derivatives showed a linear correlation with a highly negative rho+ value of -2.0. On the basis of kinetic and spectroscopic evidence, Ru(VI)(TPFPP)(O)2, Ru(II)(TPFPP)(CO), and Ru(IV)(TPFPP)Cl2 observed during catalysis were ruled out as candidates for the active catalyst responsible for the high efficiencies and turnover rates in the oxidation reactions. The fastest rates of adamantane hydroxylation with 2,6-dichloropyridine N-oxide were achieved by the reductive activation of Ru(IV)(TPFPP)Cl2 with a zinc amalgam. This redox activation is consistent with the formation of an active Ru(III) intermediate in situ by a one-electron reduction of the Ru(IV) porphyrin. EPR spectra characteristic of Ru(III) have been observed upon the reduction of Ru(IV)(TPFPP)Cl2 with a zinc amalgam. In the adamantane oxidation mediated with Ru(III)(TPFPP)(OEt), it was found that, during this process, the Ru(III) porphyrin was gradually converted to a dioxoRu(VI) porphyrin. Concomitant with this conversion, the reaction rates decreased. Catalyst activation was also stimulated by autoxidation of the solvent CH2Cl2. On the basis of these data, a mechanism is proposed that incorporates a "fast" cycle involving metastable Ru(III) and oxoRu(V) intermediates and a "slow" oxidation cycle, mediated by oxoRu(IV) and trans-dioxoRu(VI) porphyrin complexes.     

Kinetics of the light-driven aqueous autoxidation of sulfur(IV) in the absence and presence of iron(II)

The photochemical autoxidation of aqueous, acidic sulfur(IV) solutions was studied in the absence and presence of iron(II) by a newly introduced technique using a diode-array spectrophotometer, in which the same light source is used to drive and detect the reaction. Based on detailed kinetic and stoichiometric data sets, a non-chain mechanism is proposed for the autoxidation of sulfur(IV). In this mechanism, excited hydrated sulfur dioxide, *H2O.SO2, first reacts with O2 to form peroxomonosulfate ion, HSO5-, which rapidly oxidizes another H2O.SO2 to give hydrogensulfate ion as a final product. In the presence of iron(II), the formation of iron(III) was detected, which can be interpreted through the simultaneous contribution of two additional pathways: some of the HSO5- formed oxidizes iron(II) instead of sulfur(iv), and *H2O.SO2 also reacts directly with iron(II) to yield iron(III). This mechanism provides a sufficient quantitative interpretation of all experimental observations.     

Sorption of selenium(IV) and selenium(VI) onto synthetic pyrite (FeS2): spectroscopic and microscopic analyses

Pyrite was hydrothermally synthesized and used to remove Se(IV) and Se(VI) selectively from solution. Surface analyses of pyrite before and after contact with Se(IV) and Se(VI) were conducted using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and atomic force microscopy (AFM). All solid samples were acquired by allowing 3.1 mmol/L of Se(IV) or Se(VI) to react with 1 g/L of pyrite for 1, 15, or 30 days. The XPS spectra were fitted using the XPSPEAK program that applies a Gaussian Lorentzian function. The fitted spectra indicate that Se(IV) more strongly reacts with the surface-bound S than with the surface-bound Fe of pyrite. However, there is no apparent evidence of surface reaction with Se(VI). Specifically, fitted XPS spectra showed the presence of sulfide and tetrathionate on the surface, indicating that sulfur (S(2)(2-)) at the surface of pyrite can be both oxidized and reduced after contact with Se(IV). This occurs via surface disproportionation, possibly resulting in the formation of surface precipitates. Evidence for the formation of precipitates was seen in SEM and AFM images that showed rod-like particles and a phase image with higher voltage. In contrast, there were no important changes in the pyrite after contact with Se(VI) over a period of 30 days.     

Synthesis, structure and catalase-like activity of dimanganese(III) complexes of 1,5-bis(X-salicylidenamino)pentan-3-ol (X = 3- and 5-methyl). Influence of phenyl-ring substituents on catalytic activity

The diMn(III) complexes [Mn2(5-Me-salpentO)(mu-MeO)(mu-AcO)(H2O)Br] (1) and [Mn2(3-Me-salpentO)(mu-MeO)(mu-AcO)(MeOH)2]Br (2), where salpentOH = 1,5-bis(salicylidenamino)pentan-3-ol, were synthesised and structurally characterized. The two complexes include a bis(micro-alkoxo)(micro-acetato) triply-bridged diMn(III) core with an Mn...Mn separation of 2.93-2.94 A, the structure of which is retained upon dissolution. Complexes 1 and 2 show catalytic activity toward disproportionation of H2O2, with first-order dependence on the catalyst, and saturation kinetics on [H2O2], in methanol and DMF. In DMF, the two complexes are able to disproportionate at least 1500 eq. of H2O2 without significant decomposition, while in methanol, they rapidly lose activity with formation of a non-coupled Mn(II) species. Electrospray ionisation mass spectrometry, EPR and UV/vis spectroscopy used to monitor the reaction suggest that the major active form of the catalyst occurs in the Mn2(III) oxidation state during cycling. The correlation between log(k(cat)) and the redox potentials of 1, 2 and analogous complexes of other X-salpentOH derivatives indicates that, in this series, the oxidation of the catalyst is probably the rate-limiting step in the catalytic cycle. It is also noted that formation of the catalyst-peroxide adduct is more sensitive to steric effects in DMF than in methanol. Overall, kinetics and spectroscopic studies of H2O2 dismutation by these complexes converge at a catalytic cycle that involves the Mn2(III) and Mn2(IV) oxidation states.     

Chiral osmium complexes with sterically bulky Schiff-base ligands. Crystal structures of Os(IV) derivatives and the reactivity and catalytic cyclopropanation of alkenes with EDA

The syntheses and reactivities of sterically encumbered trans-dioxoosmium(VI) complexes containing Schiff-base ligands bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexane-diamine (H2tBu-salch) and bis(3,5-dibromosalicylidene)-1,2-cyclohexane-diamine (H2Br-salch) are described. Reactions of [Os(VI)tBu-salch)O2] (1a) and [Os(VI)(Br-salch)O2] (1b) with PPh(3), p-X-arylamines (X = NO2, CN), N2H4 x H2O, Ph2NNH2, SOCl2, CF3CO2H, Br2, and I2 under reducing conditions gave [Os(II)(Br-salch)(OPPh3)2] (2), [Os(IV)(Br-salch)(p-X-C6H4NH)2] (3), [mu-O-{Os(IV)(tBu-salch)(p-NO2C6H4NH)}2] (4), [Os(II)(Br-salch)(N2)(H2O)] (5), [Os(IV)(tBu-salch)(OH)(Cl)] (6), [Os(IV)(tBu-salch)(OH)2] (7), [Os(IV)(tBu-salch)Cl2] (8), [Os(IV)(tBu-salch)(CF3CO2)2] (9), [Os(IV)(tBu-salch)Br2] (10), and [Os(IV)(tBu-salch)I2] (11), respectively. X-ray crystal structure determinations of [Os(IV)(Br-salch)(p-NO2C6H4NH)2] (3a), [Os(IV)(Br-salch)(p-CNC6H4NH)2] (3b), 6, 8, 9, and 11 reveal the Os-N(amido) distances to be 1.965(4)-1.995(1) A for the bis(amido) complexes, Os-Cl distances of 2.333(8)-2.3495(1) A for 6 and 8, Os-O(CF3CO2) distances of 2.025(6)-2.041(6) A for 9, and Os-I distances of 2.6884(6)-2.6970(6) A for 11. Upon UV irradiation, (1S,2S)-(1a) reacted with aryl-substituted alkenes to give the corresponding epoxides in moderate yields, albeit with no enantioselectivity. The (1R,2R)-6 catalyzed cyclopropanation of a series of substituted styrenes exhibited moderate to good enantioselectivity (up to 79% ee) and moderate trans selectivity.     

pH oscillations in the BrO3--SO3(2-)/HSO3- reaction in a CSTR

Large-amplitude pH oscillations have been measured during the oxidation of sulfur (IV) species by the bromate ion in aqueous solution in a continuous-flow stirred tank reactor in the absence of any additional oxidizing or reducing reagent. The source of the oscillation in this simple chemical reaction is a two-way oxidation of sulfur (IV) by the bromate ion: (1) the hydrogen-ion-producing self-accelerating oxidation to sulfur (VI) (SO4(2-)), and (2) a hydrogen-ion-consuming oxidation to sulfur (V) (S2O6(2-)). In such a way, both the H+-producing and H+-consuming composite processes required for a pH oscillator take place in parallel in a reaction between two reagents in this system. A simple reaction scheme, consisting of the protonation equilibria of SO3(2-) and HSO3-, the oxidation of HSO3- and H2SO3 by BrO3- to SO4(2-), and the oxidation of H2SO3 to S2O6(2-) has successfully been used to simulate the observed dynamical behavior. Simulation with this simple scheme shows that oscillations can be calculated even if only about 1% of sulfur (IV) is oxidized to S2O6(2-) along with the main product SO4(2-). Agreement between calculated and measured dynamical behavior is found to be quite good. Increasing temperature decreases both the period length of oscillations in a CSTR and the Landolt time measured in a closed reactor. No temperature compensation of the oscillatory frequency is found in this reaction.     

Long-chain alkylimidazolium ionic liquids, a new class of cationic surfactants coated on ODS columns for anion-exchange chromatography

Separations of common inorganic anions were carried out on ODS columns coated with two long-chain alkylimidazolium ionic liquids ([C(12)MIm]Br and [C(14)MIm]Br) as new cationic surfactants for ion chromatography. With phthalate buffer solution as the mobile phases and non-suppressed conductivity detection, high column efficiencies and excellent selectivity were obtained in the separation of inorganic anions. Chromatographic parameters are calculated and the results show that the coated column possesses significant potential for the analysis of some inorganic anions such as CH(3)COO(-), IO(3)(-), Cl(-), BrO(3)(-), NO(2)(-), Br(-), NO(3)(-), SO(4)(2-), I(-), BF(4)(-), and SCN(-). The effect of eluent pH values on the separation of anions has been studied on the column coated with [C(12)MIm]Br. The stability of the coated columns was also examined.     

Visible light-induced electron transfer from di-mu-oxo-bridged dinuclear Mn complexes to Cr centers in silica nanopores

The compound (bpy) 2Mn (III)(mu-O) 2Mn (IV)(bpy) 2, a structural model relevant for the photosynthetic water oxidation complex, was coupled to single Cr (VI) charge-transfer chromophores in the channels of the nanoporous oxide AlMCM-41. Mn K-edge EXAFS spectroscopy confirmed that the di-mu-oxo dinuclear Mn core of the complex is unaffected when loaded into the nanoscale pores. Observation of the 16-line EPR signal characteristic of Mn (III)(mu-O) 2Mn (IV) demonstrates that the majority of the loaded complexes retained their nascent oxidation state in the presence or absence of Cr (VI) centers. The FT-Raman spectrum upon visible light excitation of the Cr (VI)-O (II) --> Cr (V)-O (I) ligand-to-metal charge transfer reveals electron transfer from Mn (III)(mu-O) 2Mn (IV) (Mn-O stretch at 700 cm (-1)) to Cr (VI), resulting in the formation of Cr (V) and Mn (IV)(mu-O) 2Mn (IV) (Mn-O stretch at 645 cm (-1)). All initial and final states are directly observed by FT-Raman or EPR spectroscopy, and the assignments are corroborated by X-ray absorption spectroscopy measurements. The endoergic charge separation products (Delta E o = -0.6 V) remain after several minutes, which points to spatial separation of Cr (V) and Mn (IV)(mu-O) 2Mn (IV) as a consequence of hole (O (I)) hopping as a major contributing mechanism. This is the first observation of visible light-induced oxidation of a potential water oxidation complex by a metal charge-transfer pump in a nanoporous environment. These findings will allow for the assembly and photochemical characterization of well-defined transition metal molecular units, with the ultimate goal of performing endothermic, multielectron transformations that are coupled to visible light electron pumps in nanostructured scaffolds.     

Oxidation by oxygen and sulfur of Tin(IV) derivatives containing a redox-active o-amidophenolate ligand

Oxidation of tin(IV) o-amidophenolate complexes [Sn(ap)Ph(2)] (1) and [Sn(ap)Et(2)(thf)] (2) (ap=dianion of 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone (ImQ)) with molecular oxygen and sulfur in toluene solutions was investigated. The reaction of oxygen with 1 at room temperature forms a paramagnetic derivative [Sn(isq)(2)Ph(2)] (3) (isq=radical anion of ImQ) and diphenyltin(IV) oxide [{Ph(2)SnO}(n)]. Interaction of 1 with sulfur gives another monophenyl-substituted paramagnetic tin(IV) complex, [Sn(ap)(isq)Ph] (4), and the sulfide, [Ph(3)Sn](2)S. The oxidation of 2 with oxygen and with sulfur proceeds through the derivative [Sn(isq)(2)Et(2)] (7), which undergoes alkyl elimination to give two new tin(IV) compounds, [Sn(ap)(isq)Et] (5) and [Sn(ap)(EtImQ)Et] (6) (EtImQ=2,4-di-tert-butyl-6-(2,6-diisopropylphenylimino)-3-ethylcyclohexa-1,4-dienolate ligand), respectively, along with the corresponding alkyltin(IV) oxide and sulfide. Complexes 3-5 and 7 were studied by EPR spectroscopy. The structures of 3, 4 and 6 were investigated by X-ray analysis.     

An expanded set of functional groups in bis(dithiolene)tungsten(IV,VI) complexes related to the active sites of tungstoenzymes, Including WIV-SR and WVI-O(SR)

The active sites of tungstoenzymes have the formulations W(IV,V)L(S(2)pd)(2) and W(VI)LL'(S(2)pd)(2), in which two pyranopterindithiolene cofactor ligands (S(2)pd) are chelated to a tungsten atom. Ligands L and/or L' are not fully defined in any wild-type enzyme. The feasibility of various coordination fragments (functional groups) in potential bis(dithiolene)tungsten site analogues has been examined in previous work by exploratory synthesis. This investigation expands the range of accessible functional groups. The synthetic scheme originates with [W(CO)(2)(S(2)C(2)Me(2))(2)], whose carbonyl groups are labile to substitution. Complexes [W(IV,VI)LL'(S(2)C(2)Me(2))(2)](1-) are described in terms of their functional groups W(IV,VI)LL'. Reaction of the dicarbonyl with formate in acetonitrile/THF affords W(IV)(CO)(eta(1)-HCO(2)) (4) and in Me(2)SO W(VI)O(eta(1)-HCO(2)) (7) by an oxo transfer reaction. Carboxylates yield six-coordinate W(IV)(eta(2)-O(2)CR) (1-3, R = Ph, Me, Bu(t)) with C(2)(v) symmetry. Reaction of 3 (R = Bu(t)) with Me(3)SiSR (R = C(6)H(2)-2,4,6-Pr(i)(3)) gives W(IV)(SR) (5), which undergoes oxo and sulfido atom transfer to form W(VI)O(SR) (8) and W(VI)S(SR) (9), respectively. Attempts to prepare corresponding selenolate complexes, pertinent to the active site of formate dehydrogenase, were unsuccessful, including reactions of W(VI)OCl (10) with RSe(-). Structure proofs of 2-10 were obtained by X-ray structure determinations. Some 26 functional group types in bis(dithiolene)W(IV,V,VI) molecules have now been achieved by synthesis. It remains to be seen which are incorporated in an enzyme site. A number of them (e.g., 5) are directly analogous to molybdoenzyme sites, and may possess corresponding reactivity with biological substrates, as do W(IV)(OR)/W(VI)O(OR) (prepared earlier) in the reduction of N- and S-oxides by atom transfer.     

Unusual reactivity of the [Re(V)O]3+ core: syntheses and characterization of novel rhenium halide complexes with n-methyl-o-diaminobenzene

The reactions of 1 or 2 equiv of N-methyl-o-diaminobenzene with trans-[ReOX(3)(PPh(3))(2)] (X = Cl, Br) in refluxing chloroform gave oxo-free rhenium complexes [Re(VI)X(4)(NC(6)H(4)NHCH(3))(OPPh(3))] (X = Cl, 3; X = Br, 6), [Re(V)X(2)Y(NC(6)H(4)NHCH(3))(PPh(3))(2)] (X, Y = Cl, 4; X = Br, Y = Cl, 7), [Re(IV)Cl(2)(NHC(6)H(4)NCH(3))(2)] (5), and [Re(IV)Br(3)(NHC(6)H(4)NCH(3))(PPh(3))] (8). All complexes were characterized by elemental analysis, (1)H NMR and IR spectroscopy, cyclic voltammetry, EPR spectroscopy, and X-ray crystallography. The complexes all display distorted octahedral coordination geometry. For Re(IV) complexes 5 and 8, the ligands coordinate in the benzosemiquinone diimine form. In Re(VI) complexes 3 and 6 and the Re(V) complexes 4 and 7, the ligands coordinate in the dianionic monodentate imido form. The EPR spectra of Re(VI) species 3 and 6 in dichloromethane solution at room temperature exhibit the characteristic hyperfine pattern of six lines, with evidence of strong second-order effects. The IR spectra of the complexes are characterized by Re=N and Re-N stretching bands at ca. 1090 and 540 cm(-)(1), respectively. The Re(IV) and Re(V) complexes display well-resolved NMR spectra, while the Re(VI) complexes exhibit no observable spectra, due to paramagnetism. The cyclic voltammograms of complexes 3 and 6 display Re(VII)/ Re(VI) and Re(VI)/Re(V) processes, those of 4 and 7 exhibit Re(VI)/Re(V) and Re(V)/Re(IV) couples, and those of 5 and 8 are characterized by Re(V)/Re(IV) and Re(IV)/Re(III) processes.     

Radical autoxidation and autogenous O2 evolution in manganese-porphyrin catalyzed alkane oxidations with chlorite

A manganese porphyrin catalyst employing chlorite (ClO(2)(-)) as a "shunt" oxidant displays remarkable activity in alkane oxidation, oxidizing cyclohexane to cyclohexanol and cyclohexanone with >800 turnover numbers. The ketone is apparently formed without the intermediacy of alcohol and accounts for an unusually large fraction of the product ( approximately 40%). Radical scavenging experiments indicate that the alkane oxidation mechanism involves both carbon-centered and oxygen-centered radicals. The carbon-radical trap CBrCl(3) completely suppresses cyclohexanone formation and reduces cyclohexanol turnovers, while the oxygen-radical trap Ph(2)NH inhibits all oxidation until it is consumed. These observations are indicative of an autoxidation mechanism, a scenario further supported by TEMPO inhibition and (18)O(2) incorporation into products. However, similar cyclohexane oxidation activity occurs when air is excluded. This is explained by mass spectrometric and volumetric measurements showing catalyst-dependent O(2) evolution from the reaction mixture. The catalytic disproportionation of ClO(2)(-) into Cl(-) and O(2) provides sufficient O(2) to support an autoxidation mechanism. A two-path oxidation scheme is proposed to explain all of the experimental observations. The first pathway involves manganese-porphyrin catalyzed decomposition of ClO(2)(-) into both O(2) and an unidentified radical initiator, leading to classical autoxidation chemistry providing equal amounts of cyclohexanol and cyclohexanone. The second pathway is a "rebound" oxygenation involving a high-valent manganese-oxo intermediate, accounting for the excess of alcohol over ketone. This system highlights the importance of mechanistic studies in catalytic oxidations with highly reactive oxidants, and it is unusual in its ability to sustain autoxidation even under apparent exclusion of O(2).     

Laser flash photolysis generation and kinetic studies of corrole-manganese(V)-oxo intermediates

Corrole-manganese(V)-oxo intermediates were produced by laser flash photolysis of the corresponding corrole-manganese(IV) chlorate complexes, and the kinetics of their decay reactions in CH2Cl2 and their reactions with organic reductants were studied. The corrole ligands studied were 5,10,15-tris(pentafluorophenyl)corrole (H3TPFC), 5,10,15-triphenylcorrole (H3TPC), and 5,15-bis(pentafluorophenyl)-10-(p-methoxyphenyl)corrole (H3BPFMC). In self-decay reactions and in reactions with substrates, the order of reactivity of (Cor)Mn(V)(O) was TPC > BPFMC > TPFC, which is inverted from that expected based on the electron-demand of the ligands. The rates of reactions of (Cor)Mn(V)(O) were dependent on the concentration of the oxidant and other manganese species, with increasing concentrations of various manganese species resulting in decreasing rates of reactions, and the apparent rate constant for reaction of (TPFC)Mn(V)(O) with triphenylamine was found to display fractional order with respect to the manganese-oxo species. The kinetic results are consistent in part with a reaction model involving disproportionation of (Cor)Mn(V)(O) to give (Cor)Mn(IV) and (Cor)Mn(VI)(O) species, the latter of which is the active oxidant. Alternatively, the results are consistent with oxidation by (Cor)Mn(V)(O) which is reversibly sequestered in non-reactive complexes by various manganese species.