Microwave-assisted architectural control fabrication of 3D CdS structures

A facile microwave-assisted solvothermal method was developed for the controlled synthesis of novel 3D CdS structures. Dendrite-, star-, popcorn- and hollow sphere-like CdS structures could be obtained by changing the reaction conditions including the reaction temperature and the amounts of reagents and solvents. The products were examined by using X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Raman and photoluminescence spectroscopy. Results revealed that the final structures were related to the solvent properties such as surface tension and viscosity. The degree of supersaturation is also responsible for the morphology variation and it can be adjusted by the reaction temperature. The CdS products with different morphologies exhibited interesting shape-dependent optical properties and photocatalytic activities.     

Protein folding simulations of 2D HP model by the genetic algorithm based on optimal secondary structures

In this paper, based on the evolutionary Monte Carlo (EMC) algorithm, we have made four points of ameliorations and propose a so-called genetic algorithm based on optimal secondary structure (GAOSS) method to predict efficiently the protein folding conformations in the two-dimensional hydrophobic–hydrophilic (2D HP) model. Nine benchmarks are tested to verify the effectiveness of the proposed approach and the results show that for the listed benchmarks GAOSS can find the best solutions so far. It means that reasonable, effective and compact secondary structures (SSs) can avoid blind searches and can reduce time consuming significantly. On the other hand, as examples, we discuss the diversity of protein GSC for the 24-mer and 85-mer sequences. Several GSCs have been found by GAOSS and some of the conformations are quite different from each other. It would be useful for the designing of protein molecules. GAOSS would be an efficient tool for the protein structure predictions (PSP).     

3D Bioprinting of Artificial Tissues: Construction of Biomimetic Microstructures

It is promising that artificial tissues/organs for clinical application can be produced via 3D bioprinting of living cells and biomaterials. The construction of microstructures biomimicking native tissues is crucially important to create artificial tissues with biological functions. For instance, the fabrication of vessel‐like networks to supply cells with initial nutrient and oxygen, and the arrangement of multiple types of cells for creating lamellar/complex tissues through 3D bioprinting are widely reported. The current advances in 3D bioprinting of artificial tissues from the view of construction of biomimetic microstructures, especially the fabrication of lamellar, vascular, and complex structures are summarized. In the end, the conclusion and perspective of 3D bioprinting for clinical applications are elaborated.     

Advances in 3D Bioprinting of Biomimetic and Engineered Meniscal Grafts

The meniscus plays a crucial role in loads distribution and protection of articular cartilage. Meniscal injury can result in cartilage degeneration, loss of mechanical stability in the knee joint and ultimately lead to arthritis. Surgical interventions provide only short-term pain relief but fail to repair or regenerate the injured meniscus. Emerging tissue engineering approaches based on 3D bioprinting provide alternatives to current surgical methods for meniscus repair. In this review, the current bioprinting techniques employed in developing engineered meniscus grafts are summarized and discuss the latest strategies for mimicking the gradient structure, composition, and viscoelastic properties of native meniscus. Recent progress is highlighted in gene-activated matrices for meniscus regeneration as well. Finally, a perspective is provided on the future development of 3D bioprinting for meniscus repair, emphasizing the potential of this technology to revolutionize meniscus regeneration and improve patient outcomes.     

生物高分子模板调控球形碳酸钙的仿生合成

羟丙基甲基纤维素;碳酸钙;模板;球体;合成     

Single exposure fabrication and manipulation of 3D hydrogel cell microcarriers

We present a simple and high-throughput method for fabricating free-floating hydrogel cell microcarriers using single exposure UV patterning. We also demonstrate magnetic manipulation of the free-floating cell microcarriers using a magnetic nanoparticle-embedded structure for an active agitation and a solution exchange.     

Alpha-cyclodextrin functionalized CdS nanocrystals for fabrication of 2/3 D assemblies

Different types of cyclodextrins (CDs) have been tested as mediators for the water phase transfer of organic-capped CdS nanocrystals (NCs), and alphaCD has been demonstrated to be the most effective system. The formation of a complex based on alphaCDs and colloidal NCs has been considered to be responsible for the phase transfer process and extensively investigated by optical, structural, and calorimetric measurements, as a function of the experimental parameters (pH and NC and CD concentration). A mechanism for the complexation phenomena has been suggested. The fabrication of 2/3 D supramolecular architectures has been proposed according to two different strategies. First, a layer-by-layer procedure has been used to obtain multilayered structures where polyelectrolyte layers have been intercalated with negatively charged alphaCD-CdS NC complexes by exploiting electrostatic interaction between polyelectrolyte and cyclodextrin OH groups. Second, a monolayer of CdS NCs has been deposited onto a self-assembled monolayer of sulfated CDs, thus combining the use of an electrostatic-force-based approach and host-guest chemistry. The important role played by host-guest interactions has then been revealed.     

Biomimetic creation of hierarchical surface structures by combining colloidal self-assembly and Au sputter deposition

Surfaces of hexagonally packed silica spheres have been functionalized with silanes containing different hydrocarbon or fluorocarbon chains. The resulting chemical and physical structures were studied to establish the effect of surface hydrophobicity on the measured contact angles on the rough surfaces. The results were used to assess the effects of surface modifications on the parameters in the Cassie equation. To achieve superhydrophobicity via a biomimetic approach, we created two-scale structures by first forming hexagonally packed SiO2 spheres, followed by Au deposition on the spheres and heat treatment to form Au nanoparticles on sphere surfaces. Contact angles over 160 degrees were achieved. This work provides improved understanding of the effect of the surface roughness and solid surface fraction on superhydrophobicity.     

Self-propagating fabrication of 3D porous MXene-rGO film electrode for high-performance supercapacitors

2D MXene nanosheets with metallic conductivity and high pseudo-capacitance are promising electrode materials for supercapacitors.Especially,MXene films can be directly used as electrodes for flexible supercapacitors.However,they suffer from sluggish ion transport due to self-restacking,causing limited electrochemical performance.Herein,a flexible 3D porous MXene film is fabricated by incorporating graphene oxide(GO) into MXene film followed by self-propagating reduction.The self-propagating process is facile and effective,which can be accomplished in 1.25 s and result in 3D porous framework by releasing substantial gas instantaneously.As the 3D porous structure provides massive ion-accessible active sites and promotes fast ion transport,the MXene-rGO films exhibit superior capacitance and rate performance.With the rGO content of 20%,the MXene-rGO-20 film delivers a high capacitance of 329.9 F g^-1 at 5 mV s^-1 in 3 M H2 SO4 electrolyte and remains 260.1 F g^-1 at 1,000 mV s^-1 as well as good flexibility.Furthermore,the initial capacitance is retained above 90% after 40,000 cycles at 100 A g^-1,revealing good cycle stability.This work not only provides a high-performance flexible electrode for supercapacitors,but also proposes an efficient and time-saving strategy for constructing 3D structure from 2D materials.     

Porous 3-D honeycomb architecture by self-assembly of helical H-bonded molecular tapes

Enantiopure dipeptide-derived 1,3,5-triazepan-2,6-diones and form H-bonded 3(1) helical molecular tapes with P chirality in the solid state; in the case of , these columnar tapes self-assemble through aromatic-aromatic interactions to give hollow tubular structures.     

Biomimetic fabrication of lotus-leaf-like structured polyaniline film with stable superhydrophobic and conductive properties

Superhydrophobic surfaces were successfully prepared on Ti/Si substrates via the fabrication of conductive polyaniline (PANI) nanowire film. The PANI nanowire film was synthesized by electrodeposition of aniline into the pores of an anodic aluminum oxide (AAO) template on Ti/Si substrate followed by the removal of the template. The surface showed conductivity and superhydrophobicity, even in many corrosive solutions, such as acidic or basic solutions over a wide pH range. Field emission scanning electron microscopy (FE-SEM) demonstrated that the binary geometric structures at micro- and nanometer scale bestowed the prerequisite roughness on the surfaces. The chemical surface modification made the PANI nanowire film superhydrophobic. The results demonstrated that the PANI nanowire film will have good potential applications in the preparation of conductive superhydrophobic surfaces.     

Fast folding and comparison of RNA secondary structures

Summary Computer codes for computation and comparison of RNA secondary structures, the Vienna RNA package, are presented, that are based on dynamic programming algorithms and aim at predictions of structures with minimum free energies as well as at computations of the equilibrium partition functions and base pairing probabilities.An efficient heuristic for the inverse folding problem of RNA is introduced. In addition we present compact and efficient programs for the comparison of RNA secondary structures based on tree editing and alignment.All computer codes are written in ANSI C. They include implementations of modified algorithms on parallel computers with distributed memory. Performance analysis carried out on an Intel Hypercube shows that parallel computing becomes gradually more and more efficient the longer the sequences are.

---

Schnelle Faltung und Vergleich von Sekundärstrukturen von RNA

Zusammenfassung Die im Vienna RNA package enthaltenen Computer Programme für die Berechnung und den Vergleich von RNA Sekundärstrukturen werden präsentiert. Ihren Kern bilden Algorithmen zur Vorhersage von Strukturen minimaler Energie sowie zur Berechnung von Zustandssumme und Basenpaarungswahrscheinlichkeiten mittels dynamischer Programmierung.Ein effizienter heuristischer Algorithmus für das inverse Faltungsproblem wird vorgestellt. Darüberhinaus präsentieren wir kompakte und effiziente Programme zum Vergleich von RNA Sekundärstrukturen durch Baum-Editierung und Alignierung.Alle Programme sind in ANSI C geschrieben, darunter auch eine Implementation des Faltungs-algorithmus für Parallelrechner mit verteiltem Speicher. Wie Tests auf einem Intel Hypercube zeigen, wird das Parallelrechnen umso effizienter je länger die Sequenzen sind.

     

Lithium-sulphur batteries based on biological 3D structures

Journal of Solid State Electrochemistry - Lithium-sulphur accumulators are, thanks to their high theoretical energy density and good availability of sulphur, one of the most promising concepts of...     

Biomimetic fabrication of hydroxyapatite-coated zirconia-magnesia composite and its application in the separation of proteins

In this work, biomimetic technique was proposed for the first time to prepare chromatographic packings (2HAp-ZM) for protein separation. By mimicking the mineralization procedures in vivo, this type of matrix with hydroxyapatite (HAp) coating and zirconia-magnesia (ZM) composite core was fabricated. Systematic characterizations, including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and specific surface area analysis, were carried out to investigate the properties of the material. Results showed that the surface of 2HAp-ZM was composed of bead-like, amorphous or nanocrystalline HAp. The specific surface area, total pore volume, and average pore diameter of the resultant material were 25 m²/g, 0.09 cm³/g, and 14 nm, respectively. Furthermore, 2HAp-ZM exhibited good mechanical stability through repeated testing and its application as stationary phases for protein separation was then studied. Five model proteins (bovine serum albumin, trypsin, lysozyme, ribonuclease A, and cytochrome c) were successfully separated on 2HAp-ZM. Finally, the mass recovery of protein and the dynamic loading capacity were studied; the results were calculated to be no less than 93% and 80 μg/mL of blank column volume, respectively.     

FDM 3D printing of combustible structures: First results

For the first time, complex geometry combustible structures of an ammonium perchlorate–polylactic acid composite have been successfully printed using fused deposition modeling (FDM). The structural and energetic capabilities of the printed structures are demonstrated. Combined with the ability to be produced by FDM printing, these combustible elements could afford many practical applications.