同一体系中铜(Ⅱ)、铅(Ⅱ)、镉(Ⅱ)、镍(Ⅱ)和钴(Ⅱ)的络合物吸附波及其分析应用

研究了丁二酮肟 氨 氯化铵 柠檬酸钠 明胶 抗坏血酸体系中Cu(Ⅱ )、Pb(Ⅱ )、Cd(Ⅱ )、Ni(Ⅱ )和Co(Ⅱ )的络合物吸附波 ,建立了同时测定水溶液中痕量相应元素的新方法。上述金属络合物分别在 -0 .44、-0 60、-0 .76、-1.0 7和 -1.2 4V左右产生灵敏的极谱波。信噪比为 3时 ,检出限分别为 1.0× 10 - 8、2 .3×10 - 8、1.3× 10 - 8、2 .9× 10 - 1 0 和 3 .6× 10 - 1 1 mol/L。铜、铅、镉、镍和钴的浓度分别为 2 .0× 10 - 8～ 2 .0× 10 - 5,4.8× 10 - 8～ 4.8× 10 - 5,3 .0× 10 - 8～ 3 .0× 10 - 5,5 .4× 10 - 1 0 ～ 5 .4× 10 - 7和 6.8× 10 - 1 1 ～ 6.8× 10 - 8mol/L时 ,与相应峰电流线性关系良好。方法用于同时快速测定实际样品中这些金属离子 ,获得满意结果     

用2-QADN2,7-金属络合物示波极谱法同时测定铜镍钴镉

本文研究了2-QADN2,7-金属络合物的极谱特性。在pH9.60的缓冲溶液中,Cu(Ⅱ)、Ni(Ⅱ)、Co(Ⅱ)和Cd(Ⅱ)与2-QADN2,7的络合物在-0.37、-0.69、-0.77和-0.82V产生灵敏的极谱波,利用这些波可测定痕量的铜、镍、钴和镉。铜的检测下限为2.0×10~(-8)mol/L,镍、钴及镉的检测下限为5.0×10~(-8)mol/L。提出的方法用于同时测定头发和茶叶中的痕量铜、镍和钴,结果满意。     

配位吸附波同时测定PbA和InA

在 0 .0 5mol/L氯乙酸 氯乙酸钠 (pH 3.0 )介质中 ,Pb2 + 、In3 + 与二溴邻苯二胺双草酰胺酸酯 (DBAC)生成络合物 ,并吸附于电极表面 ,分别于 - 0 .5 0V、- 0 .6 3V(vs .SCE)得到络合物吸附还原波。其二阶导数峰电流与Pb2 + 、In3 + 浓度分别在 2 .5× 10 -8～ 6 .0× 10 -6mol/L、7.5× 10 -8～ 3.4× 10 -6mol/L内呈良好的线性关系 ;检出限分别为 1.5× 10 -8mol/LPb2 + 和 4 .5× 10 -8mol/LIn3 + 。应用于陶瓷颜料、矿石中微量Pb、In的测定 ,结果满意。     

溶出伏安法同时测定水中痕量铀和镍

本文报道了同时测定钴和镍的一种方法.在 0.01mol/L NH_3·H_2O-0.01mol/LNH_4Cl-3.0×10~(-5)mol/L安息香缩氨基硫脲(BTSC)溶液中,钴(Ⅱ)和镍(Ⅱ)均产生非常灵敏的还原波,其峰电位分别是:-0.94和-0.75V(vs.SCE),峰电流与钴和镍的浓度分别在2.0×10~(-8)~1.0×10~(-6)和1.0×10~(-8)~8.0×10~(-7)mol/L范围内成直线关系,该方法用于测定水中痕量钴和镍,相对标准偏差分别为1.4~2.0%和2.1~2.5%,回收率分别在98.0%~101.8%和97.9%~102.1%之间.     

酪氨酸、脯氨酸和组氨酸的示波极谱连续测定

提出了用示波极谱法连续测定酪氨酸 ( Tyr)、脯氨酸 ( Pro)、组氨酸( His) 3种氨基酸的新方法。在 p H9.2硼酸缓冲溶液中 ,上述 3种氨基酸与镍发生配位反应 ,用示波极谱仪进行单扫描时 ,出现 3组灵敏度和分辨率均很高的二阶导数波谱 ,峰电位分别为 :Tyr - 1 .0 4 V,Pro - 1 .2 0 V,His - 1 .34V。酪氨酸、脯氨酸、组氨酸的峰电流与浓度分别在 2 .0× 1 0 -5～ 3.0× 1 0 -4 mol/L,3.2× 1 0 -6～ 2 .2× 1 0 -4 mol/L,4.0× 1 0 -5～ 2 .5× 1 0 -4 mol/L的范围内呈线性关系。该法已用于复方氨基酸注射液中酪氨酸、脯氨酸、组氨酸含量的测定。     

镉-向红菲啰啉体系吸附伏安法测定镉

在pH＝4.1的0．03mol／L邻苯二甲酸氢钾介质中，Cd（Ⅱ）-向红菲啉络合物于悬汞电极上在-0．65V（vs．SCE）电位处产生一灵敏的吸附还原峰，利用1．5次微分技术进行测定，络合物波峰峰值epp与Cd（Ⅱ）浓度在1．0×10－9～1．0×10－7mol／L范围内呈良好的线性关系，检出下限为7×10－10mol／LCd（Ⅱ），本文详细研究了测定镉的最佳条件，对络合物在汞电极上的电化学行为进行了初步探讨。方法用于环境水样中微量镉的测定，结果令人满意。     

2-(2-噻唑偶氮)-对-甲酚螯合物反相高效液相色谱同時分离测定镍、钴的研究——合金中微量钴和镍的测定

本文研究了2-(2-噻唑偶氮)-对-甲酚(TAC)与镍(Ⅱ)、钴(Ⅱ)螯合物的柱前衍生条件和液相色谱的分离条件。于KYWG-C_(18)柱上,用含有0.03mol/L KH_2PO_4-Na_2HPO_4(pH7.77)和2.5×10~(-4)mol/L TAC的甲醇-四氢呋喃-水(40∶10∶50 V/V)混合液为流动相,流速为1.0mL/min。于580nm处检测。该法用于四种标准合金中镍和钴的测定,回收率在98%～101.5%之间。Ni(Ⅱ)和Co(Ⅱ)的检出限(信噪比为2∶1)分别为0.2ng和1.5ng。建立了同时测定镍,钴的高灵敏、高选择性,快速的HPLC-光度法。     

双硫腙修饰玻碳电极阳极溶出伏安法测定痕量镉和铅

报道了双硫腙修饰玻碳电极同时测定痕量镉和铅的电分析方法。镉和铅离子通过与电极表面的双硫腙发生螯合作用而富集在电极表面 ,同时在 -1 .2 0V(vs.SCE)还原成零价镉和铅 ,当电极电势从 -1 .2 0V向 -0 .3 0V扫描时 ,被还原的镉和铅从电极表面溶出 ,分别于 -0 .78V和 -0 .4 8V左右形成灵敏的阳极溶出峰。优化了支持电解质及pH值、双硫腙用量、富集电位及时间等实验参数。利用该修饰电极测定镉、铅的线性范围分别为 1 .0×1 0 - 8～ 2 .5× 1 0 - 6 mol L和 5 .0× 1 0 - 9～ 2 .5× 1 0 - 6 mol L。检测限分别为 5 .0× 1 0 - 9mol L和7.0× 1 0 - 1 0 mol L。该法用于实际水样中镉和铅的测定 ,平均回收率分别为 99.3 0 %和 99.5 4 %。     

方波吸附溶出伏安法同时测定水中痕量铜和镉

报道了应用方波吸附溶出伏安法 (OSWSV)同时测定Cu(Ⅱ )和Cd(Ⅱ )。在 0 .0 1mol·L- 1酒石酸钾钠 2 .0× 10 - 4mol·L- 1水杨醛肟溶液中 (pH 11.75 ) ,Cu(Ⅱ )和Cd(Ⅱ )分别与水杨醛肟形成的络合物均产生非常灵敏的还原波 ,峰电位分别为 - 0 .5 5 6V和 - 0 .70 4V (vs.Ag/AgCl以下均同 )。峰电流与Cu(Ⅱ )、Cd(Ⅱ )浓度分别在 9.0× 10 - 74 .0× 10 - 8mol·L- 1和 2 .0× 10 - 6 6 .0×10 - 8mol·L- 1范围内呈线性关系 ,检出限均为 1.0× 10 - 8mol·L- 1。该法用于同时测定水样中痕量Cu(Ⅱ )和Cd(Ⅱ ) ,所得结果满意。通过对该体系的初步研究 ,Cu(Ⅱ )、Cd(Ⅱ )与水杨醛肟形成的络合物的还原峰具有明显的吸附性。     

镉(Ⅱ)-meso(4-磺基苯)卟啉络合物的极谱伏安行为

用紫外分光光度法和循环伏安法考察了镉与meso(4-磺基苯)卟啉在强碱性溶液中形成的络合物的特性.结果表明,加入Cd(Ⅱ)后该卟啉的索瑞特(Soret)吸收带发生发红移,循环伏安图上出现了新的还原峰,峰电位为-1.20V(vs.SCE),络合物的络合比为11,稳定常数β=1.19×107.本文还用多种电化学技术证明了络合物的还原峰电流具有吸附特征;用示波极谱法二阶导数波测试了峰电流与镉离子浓度的关系,结果表明镉离子在3×10-7～1×10-5mol/L的浓度范围内与络合物峰电流有良好的线性关系;并求得了电极反应的电子转移数为2.此外本文还对络合物的电极反应机理进行了探讨.     

Metal-Directed Formation of Tetra-, Hexa-, Octa-, and Nonanuclear Complexes of Magnesium,Calcium, Manganese,Copper, and Cadmium

Efficacious metal control of self-assembly of dialkylketipinate dianions leads to completely different supramolecular assemblies. The structures of grid 1 , double-decker 2 , triple-decker 3 , and metalla-spherand 4 were characterized by X-ray crystallographic analyses or by NMR spectroscopy.     

Structural, magnetic, and spectroscopic studies of YAgSn, TmAgSn, and LuAgSn

The rare earth-silver-stannides YAgSn, TmAgSn, and LuAgSn were synthesized from the elements by arc-melting and subsequent annealing. The three stannides were investigated by X-ray powder and single-crystal diffraction: NdPtSb type, P6₃mc, Z=2, a=468.3(1), pm, wR₂=0.0343, 353 F² values, 12 variables for YAgSn, and ZrNiAl type, P6¯2 m, a=726.4(2), , wR₂=0.0399, 659 F² values, 15 variables for TmAgSn, and a=723.8(2), , wR₂=0.0674, 364 F² values, 15 variables for LuAgSn. Besides conventional laboratory X-ray data with monochromatized Mo radiation, the structures were also refined on the basis of synchrotron data with , in order to clarify the silver-tin ordering more precisely. YAgSn has puckered, two-dimensional [AgSn] networks with Ag-Sn distances of 278 pm, while the [AgSn] networks of TmAgSn and LuAgSn are three-dimensional with Ag-Sn distances of 279 and 284 pm for LuAgSn. Susceptibility measurements indicate Pauli paramagnetism for YAgSn and LuAgSn. TmAgSn is a Curie-Weiss paramagnet with an experimental magnetic moment of 7.2 μ_B/Tm. No magnetic ordering is evident down to 2 K. The local environments of the tin sites in these compounds were characterized by ¹¹⁹Sn Mössbauer spectroscopy and solid-state NMR (in YAgSn and LuAgSn), confirming the tin site multiplicities proposed from the structure solutions and the absence of Sn/Ag site disordering. Mössbauer quadrupolar splittings were found in good agreement with calculated electric field gradients predicted quantum chemically by the WIEN2k code. Furthermore, an excellent correlation was found between experimental ¹¹⁹Sn nuclear magnetic shielding anisotropies (determined via MAS-NMR) and calculated electric field gradients. Electronic structure calculations predict metallic properties with strong Ag-Sn bonds and also significant Ag-Ag bonding in LuAgSn.     

Theoretical Study of Molecular Structure,Reactivity, Lipophilicity,and Solubility of N-Hydroxyurea,N-Hydroxythiourea,and N-Hydroxysilaurea

Ab initio molecular orbital methods at the CBS-QB3 level of theory have been used to study the structure and gas-phase stability of various tautomers and rotamers of N-hydroxyurea, N-hydroxythiourea, and N-hydroxysilaurea, their anions and protonated forms. The geometries of N-hydroxyurea, N-hydroxythiourea, and N-hydroxysilaurea, their anions and cations were optimized at the Becke3LYP/CBSB7 level of theory. For all compounds studied, the amidic form is computed to be substantially more stable than the iminolic tautomer. N-Hydroxyurea and its thio and sila derivatives are computed to behave as Nacids in the gas phase. These compounds are in gas-phase weak acids with a calculated acidity of about 1425 to 1355 kJ-mol^–1. Basicities increase in the order: N-hydroxyurea < N-hydroxythiourea < N-hydroxysilaurea. The most stable protonated structures are represented by several isomers with almost equal stability. Thus, in the N-hydroxyurea, N-hydroxythiourea, and N-hydroxysilaurea, both protonation at the double bonded (C=O, C=S and Si=O) oxygen and sulfur atoms, as well as the protonation at the N(H)OH nitrogen basic center is equally probable. The experimental pK _a value (10.6) of N-hydroxyurea and the computed value (9.7) for its monohydrated complex with the specifically hydrogen-bonded water molecule to the ionizable OH group are in a good agreement. The experimental partition coefficient of N-hydroxyurea is best reproduced by the Alog P_s method. The formation of nitroxide radical in the reaction of N-hydroxyurea and its sulfur and silicon substituted derivatives with the phenol radical is an exothermic process. Thus, the \bondN(H)OH moiety of these compounds may quench the structurally related tyrosyl radicals in the active site of ribonucleotide reductase.     

Synthesis and characterization of metal-centered, six-membered, mixed-valent, heterometallic wheels of iron, manganese, and indium

Heptanuclear metal-centered, six-membered, mixed-valent, heterometallic wheels 1-3 of iron, manganese, and indium were prepared in a one-pot reaction from N-benzyldiethanolamine (H2L(1)), cesium carbonate, [PPh4]2[MnCl4], and FeCl3 or InCl3. All three complexes were characterized by the combination of elemental analysis, FAB mass spectroscopy, X-ray diffraction and cyclic voltammetry and in the case of 1 additionally by M?ssbauer spectroscopy. In 1, four Mn(II) ions in the periphery are arranged in pairs alternating with one Fe(III) ion each, with an Fe(III) ion located in the center. In 2, three Mn(II) ions alternate with three In(III) ions, whereas in 3, four In(III) ions are arranged in pairs and alternate with one Mn(II) ion each. In 2 and 3 an Mn(II) ion is encapsulated in the center.     

Synthesis of yttrium,lanthanum, neodymium,praseodymium, and lutetium alkoxides and acetylacetonates

A convenient and practical method is proposed for the synthesis of lanthanide and yttrium alkoxides. The method involves dissolving the metals or their hydrides in a solution of dry HCl in the corresponding alcohol, with subsequent dehalogenation of the LnCl₃ solution by an equivalent amount of alkali metal (Na, Li), The rareearth alkoxides are easily converted into acetylacetonates Ln(acac)₃ by the action of acetylacetone.A. N. Nesmeyanov Institute of Elementoorganic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2490–2493, November, 1992.     

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.     

Structure and properties of HOO,HOS, HSO,HSS, FSO,FOS and FSS

High quality SCF-MO calculations are reported for the title molecules, including geometry optimization. One-electron properties are presented and discussed, and relative stabilities of (HOS, HSO) and (FOS, FSO) compared. Little experimental geometric data are available at present, but the calculated and experimental geometries of HO₂ agree well.     

Determination of Cd, Co, Cr, Cu, Fe, Ni and Pb in Milk, Cheese and Chocolate

 Combined analytical procedures consisting of wet digestion step followed by instrumental determination – differential pulse cathodic stripping voltammetry (DPCSV) or electrothermal atomic absorption spectrometry (ETAAS) – as well as a direct analysis method – slurry sampling ETAAS – for the determination of Cd, Co, Cr, Cu, Fe, Ni and Pb in milk, cheese and chocolate are described and compared. Wet digestion using a mixture of HNO₃-HClO₄-H₂O₂ is proposed for complete matrix decomposition prior to trace analyte determinati on by DPCSV or ETAAS. A mixture of HNO₃-H₂O₂ is used for slurry preparation. Optimal instrumental parameters for trace analyte measurements are presented. The reliability of the procedures has been verified by analyzing standard reference materials. Results obtained are in good agreement with the certified values and the relative standard deviations (for these results) are in the range 5–10% for wet digestion DPCSV or ETAAS and 3–9% for slurry sampling ETAAS in the range of 2 μgċg⁻¹ (Cd) to 12 μgċg⁻¹ (Fe). Received August 24, 1999. Revision January 20, 2000.     

Synthesis, Analgesic, and Antiparkinsonian Profiles of Some Pyridine, Pyrazoline, and Thiopyrimidine Derivatives

Summary. A series of substituted pyridine, pyrazoline, and thiopyrimidine derivatives were synthesized from 3-acetylpyridine, which was prepared from nicotinic acid as a naturally starting material. The pharmacological screening showed that many of these compounds have good analgesic and antiparkinsonian activities comparable to Voltarene^? and Benzatropine^? as reference drugs. The structure assignment of the new compounds is based on chemical and spectroscopic evidence. The detailed synthesis, spectroscopic data, and pharmacological properties for synthesized compounds are reported.