Effect of non-uniform heat source on MHD heat transfer in a liquid film over an unsteady stretching sheet

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a laminar liquid film over a flat impermeable stretching sheet in the presence of a non-uniform heat source/sink. The basic unsteady boundary layer equations governing the flow and heat transfer are in the form of partial differential equations. These equations are converted to non-linear ordinary differential equations using similarity transformation. Numerical solutions of the resulting boundary value problem are obtained by the efficient shooting technique. The effects of magnetic and the non-uniform heat source/sink parameters on the dynamics are discussed. Findings of the paper reveal that non-uniform heat sinks are better suited for effective cooling of the stretching sheet. Skin friction coefficient and the local Nusselt number are also explored for typical values of magnetic and non-uniform heat source/sink parameters. The results are in excellent agreement with the earlier published works, under some limiting cases.     

MHD flow and heat transfer over permeable stretching sheet with slip conditions

The magnetohydrodynamic (MHD) flow and heat transfer characteristics for the boundary layer flow over a permeable stretching sheet are considered. Velocity and thermal slip conditions are taken into account. Problem formulation is developed in the presence of thermal radiation. Governing non‐linear problem is solved by a homotopy analysis method. Convergence of the derived solutions is studied. Numerical values of skin‐friction coefficient and local Nusselt number are tabulated. Effects of pertinent parameters on the velocity and temperature profiles are discussed. Comparison between the present and previous limiting results is shown. Copyright © 2010 John Wiley & Sons, Ltd.     

The unsteady heat transfer due to a heat source in an MHD stretching sheet flow

The time evolution in the temperature field resulting from the sudden introduction of a heat source into the already fully established steady MHD flow of an electrically conducting fluid past a linearly stretching isothermal surface is considered. The problem is shown to be fully described by two dimensionless parameters, a modified magnetic field strength ?? and a heat source strength Q. Numerical solutions of the initial-value problem show that there is a critical value Q _c of the parameter Q, dependent on ??, such that, for Q<Q _c , the solution approaches a steady state at large times and, for Q>Q _c , the solutions grows exponentially large as time increases. This growth rate is determined through an eigenvalue problem which also determines the critical value Q _c . The limits of Q _c for both small and large values of ?? are discussed.     

A note on flow and heat transfer of a viscoelastic fluid over a stretching sheet

This paper presents a study of the flow and heat transfer of an incompressible homogeneous second grade fluid past a stretching sheet. The governing partial differential equations are converted into ordinary differential equations by a similarity transformation. The effects of viscous dissipation and work due to deformation are considered in the energy equation and the variations of dimensionless surface temperature and dimensionless surface temperature gradient with various parameters are graphed and tabulated. Two cases are studied, namely, (i) the sheet with constant surface temperature (CST case) and (ii) the sheet with prescribed surface temperature (PST case).     

MHD flow and heat transfer for the upper-convected Maxwell fluid over a stretching sheet

In the present work, the effect of MHD flow and heat transfer within a boundary layer flow on an upper-convected Maxwell (UCM) fluid over a stretching sheet is examined. The governing boundary layer equations of motion and heat transfer are non-dimensionalized using suitable similarity variables and the resulting transformed, ordinary differential equations are then solved numerically by shooting technique with fourth order Runge–Kutta method. For a UCM fluid, a thinning of the boundary layer and a drop in wall skin friction coefficient is predicted to occur for higher the elastic number. The objective of the present work is to investigate the effect of Maxwell parameter β, magnetic parameter Mn and Prandtl number Pr on the temperature field above the sheet.     

Accurate solutions for viscoelastic boundary layer flow and heat transfer over stretching sheet

In this article, we present accurate analytical solutions for boundary layer flow and heat transfer of an incompressible and electrically conducting viscoelastic fluid over a linearly stretching surface subject to a transverse uniform magnetic field using the homotopy analysis method （HAM） for two general types of non-isothermal boundary conditions. In addition, we demonstrate that the previously reported analytical solutions for the temperature field given in terms of Kummer＇s function do not converge at the boundary. We provide a graphical and numerical demonstration of the convergence of the HAM solutions and tabulate the effects of various parameters on the skin friction coefficient and wall heat transfer.     

MHD boundary layer flow and heat transfer over a stretching sheet with induced magnetic field

In this paper, the problem of steady magnetohydrodynamic boundary layer flow and heat transfer of a viscous and electrically conducting fluid over a stretching sheet is studied. The effect of the induced magnetic field is taken into account. The transformed ordinary differential equations are solved numerically using the finite-difference scheme known as the Keller-box method. Numerical results are obtained for various values of the magnetic parameter, the reciprocal magnetic Prandtl number and the Prandtl number. The effects of these parameters on the flow and heat transfer characteristics are determined and discussed in detail. When the magnetic field is absent, the closed analytical results for the skin friction are compared with the exact numerical results. Also the numerical results for the heat flux from the stretching surface are compared with the results reported by other authors when the magnetic field is absent. It is found that very good agreement exists.     

Effects of thermal radiation on MHD viscous fluid flow and heat transfer over nonlinear shrinking porous sheet

This paper investigates the effects of thermal radiation on the magnetohy-drodynamic (MHD) flow and heat transfer over a nonlinear shrinking porous sheet. The surface velocity of the shrinking sheet and the transverse magnetic field are assumed to vary as a power function of the distance from the origin. The temperature dependent viscosity and the thermal conductivity are also assumed to vary as an inverse function and a linear function of the temperature, respectively. A generalized similarity transformarion is used to reduce the governing partial differential equations to their nonlinear coupled ordinary differential equations, and is solved numerically by using a finite difference scheme. The numerical results concern with the velocity and temperature profiles as well as the local skin-friction coefficient and the rate of the heat transfer at the porous sheet for different values of several physical parameters of interest.     

Effects of slip condition on MHD stagnation-point flow over a power-law stretching sheet

The steady two-dimensional magnetohydrodynamic stagnation flow towards a nonlinear stretching surface is studied. The no-slip condition on the solid boundary is replaced with a partial slip condition. A scaling group transformation is used to get the invariants. Using the invariants, a third-order ordinary differential equation corresponding to the momentum is obtained. An analytical solution is obtained in a series form using a homotopy analysis method. Reliability and efficiency of series solutions are shown by the good agreement with numerical results presented in the literature. The effects of the slip parameter, the magnetic field parameter, the velocity ratio parameter, the suction velocity parameter, and the power law exponent on the flow are investigated. The results show that the velocity and shear stress profiles are greatly influenced by these parameters.     

MHD free convective flow and mass transfer over a stretching sheet with chemical reaction

The effect of chemical reaction on free convective flow and mass transfer of a viscous, incompressible and electrically conducting fluid over a stretching surface is investigated in the presence of a constant transverse magnetic field. The non-linear boundary layer equations with the boundary conditions are transferred by a similarity transformation into a system of non-linear ordinary differential equations with the appropriate boundary conditions. Furthermore, the similarity equations are solved numerically by using a fourth order Runge-Kutta scheme with the shooting method. Numerical results of the skin friction coefficient, the local Nusselt number Nu, the local Sherwood number Sh, as will as the velocity, temperature and concentration profiles are presented for gases with a Prandtl number of 0.71 for various values of chemical reaction parameter, order of reaction, magnetic parameter and Schmidt number.     

Boundary layer flow and heat transfer of a dusty fluid flow over a stretching sheet with non-uniform heat source/sink

The present paper deals with the analysis of boundary layer flow and heat transfer of a dusty fluid over a stretching sheet with the effect of non-uniform heat source/sink. Here we consider two types of heating processes namely (i) prescribed surface temperature and (ii) prescribed surface heat flux. The momentum and thermal boundary layer equations of motion are solved numerically using Runge Kutta Fehlberg fourth–fifth order method (RKF45 Method). The effects of fluid particle interaction parameter, Eckert number, Prandtl number, Number of dust particle and non-uniform heat generation/absorption parameter on temperature distribution are analyzed and also the effect of wall temperature gradient function and wall temperature function are tabulated and discussed.     

Thermal radiation effects on the flow and heat transfer in a liquid film on an unsteady stretching sheet

The influence of thermal radiation on the flow and heat transfer within Newtonian liquid film over an unsteady stretching sheet with and without thermocapillarity is examined. The governing non‐linear partial differential equations describing the problem are reduced to a system of nonlinear ordinary differential equations using similarity transformation, which is solved numerically for different values of the thermal radiation parameter and the thermocapillarity parameter. The results show that the dimensionless velocity, the film thickness and the local Nusselt number increase as the thermocapillarity parameter increases, while the free surface temperature decreases with increasing the thermocapillarity parameter. Also, both the dimensionless temperature and the free surface temperature increase and the local Nusselt number decreases as the thermal radiation parameter increases. Copyright © 2010 John Wiley & Sons, Ltd.     

MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.     

MHD flow and heat transfer in a thin liquid film on an unsteady stretching sheet by the homotopy analysis method

The magnetohydrodynamics flow and heat transfer in a thin liquid film over an unsteady elastic stretching surface are analyzed by the homotopy analysis method. A more general surface temperature is taken into consideration. The effects of various parameters in this study are discussed and presented graphically. The good agreement between the analytic series solutions and the previous numerical results shows the effectiveness of HAM to this problem. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of viscous dissipation and heat source on flow and heat transfer of dusty fluid over unsteady stretching sheet

This paper investigates the problem of hydrodynamic boundary layer flow and heat transfer of a dusty fluid over an unsteady stretching surface.The study considers the effects of frictional heating(viscous dissipation) and internal heat generation or absorption.The basic equations governing the flow and heat transfer are reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformations.The transformed equations are numerically solved by the Runge-Kutta-Fehlberg-45 order method.An analysis is carried out for two different cases of heating processes,namely,variable wall temperature(VWT) and variable heat flux(VHF).The effects of various physical parameters such as the magnetic parameter,the fluid-particle interaction parameter,the unsteady parameter,the Prandtl number,the Eckert number,the number density of dust particles,and the heat source/sink parameter on velocity and temperature profiles are shown in several plots.The effects of the wall temperature gradient function and the wall temperature function are tabulated and discussed.     

The influence of thermal radiation on MHD station-point flow past a stretching sheet with heat generation

This letter is concerned with the plane and axisymmetric stagnation-point flows and heat transfer of an electrically-conducting fluid past a stretching sheet in the presence of the thermal radiation and heat generation or absorption. The analytical solutions for the velocity distribution and dimensionless temperature profiles are obtained for the various values of the ratio of free stream velocity and stretching velocity, heat source parameter, Prandtl number, thermal radiation parameter, the suction and injection velocity parameter and magnetic parameter and dimensionality index in the series form with the help of homotopy analysis method (HAM). Convergence of the series is explicitly discussed. In addition, shear stress and heat flux at the surface are calculated.     

MHD flow and heat transfer over a stretching surface with prescribed wall temperature or heat flux

The flow and heat transfer over a stretching sheet with a magnetic field in an electrically conducting ambient fluid have been studied. The effects of the induced magnetic field and sources or sinks have been included in the analysis. Both non-isothermal wall and constant heat flux conditions have been considered. The governing equations have been solved numerically using a shooting method. It is observed that for the prescribed wall temperature the skin friction, induced magnetic field at the wall and heat transfer are enhanced due to the magnetic field, but in general, they reduce as the reciprocal of the magnetic Prandtl number increases. For constant heat flux case, the temperature at the wall reduces as the magnetic field increases, but it increases with the reciprocal of the magnetic Prandtl number. The heat transfer is strongly affected by the Prandtl number, wall temperature and sink. Whenm<–2 andPr>2.5 the unrealistic temperature distributions are encountered. The present analysis is more general than any previous investigation.

---

MHD Strömung und Wärmeübertragung über eine gedehnte Oberfläche mit vorgeschriebener Wandtemperatur oder Wärmestrom

Zusammenfassung In dieser Studie ist die Strömung und Wärmeübertragung über eine gedehnte Fläche mit magnetischem Feld in einem elektrisch leitenden Fluid untersucht worden. Der Einfluß des induzierten magnetischen Feldes und der Quellen oder Senken sind in die Untersuchung einbezogen. Die beiden Fälle, nicht-isotherme Wand und konstanter Wandwärmestrom, sind betrachtet worden. Mit dem Eliminationsverfahren sind bestehende Gleichungen numerisch gelöst worden. Es ist beobachtet worden, daß für eine vorgeschriebene Wandtemperatur die Oberflächenreibung, das induzierte magnetische Feld und die Wärmeübertragung aufgrund des magnetischen Feldes verbessert sind. Aber im allgemeinen reduzieren sie sich im umgekehrten Maß wie die magnetische Prandtlzahl ansteigt. Für den Fall des konstanten Wärmestromes sinkt die Wandtemperatur, wenn das magnetische Feld stärker wird. Die Temperatur steigt jedoch reziprok zur magnetischen Prandtlzahl an. Die Wärmeübertragung ist sehr stark von der Prandtlzahl, Wandtemperatur und der Senke beeinflußt. Bei Werten vonm<–2 undPr2.5 sind unrealistische Temperaturverteilungen eingetreten. Die gezeigte Analyse ist allgemeiner als jede vorhergehende Untersuchung.

     

MHD boundary-layer flow of a non-Newtonian nanofluid past a stretching sheet with a heat source/sink

The goal of the present paper is to examine the magnetohydrodynamic effects on the boundary layer flow of the Jeffrey fluid model for a non-Newtonian nanofluid past a stretching sheet with considering the effects of a heat source/sink. The governing partial differential equations are reduced to a set of coupled nonlinear ordinary differential equations by using suitable similarity transformations. These equations are then solved by the variational finite element method. The profiles of the velocity, temperature, and nanoparticle volume fraction are presented graphically, and the values of the Nusselt and Sherwood numbers are tabulated. The present results are compared with previously published works and are found to be in good agreement with them.