Spectrophotometric determination of carbon tetrachloride via ultrasonic oxidation of iodide accelerated by dissolved carbon tetrachloride

Ultrasonic oxidation of iodide was investigated in the presence of carbon tetrachloride (CCl₄). The ultrasonic oxidation of potassium iodide led to formation of iodine and then I₃⁻ in the presence of excess iodide, and the generated I₃⁻ shows strong UV absorption with a molar absorptivity of 2.31 × 10⁴ L mol⁻¹ cm⁻¹ at the maximum absorption wavelength of 351 nm. The ultrasonic oxidation of iodide was found to be significantly promoted by a small addition of CCl₄, and it was further found that the generation rate was increased with the amount of CCl₄ added. This can be used to analyze the level of CCl₄ dissolved in aqueous solutions. Under optimum conditions, the concentration of generated iodine (or its absorption at 351 nm) was found to correlated linearly with the concentration of CCl₄ in the range of 0.2-50 mg L⁻¹ (detection limit = 0.09 mg L⁻¹, R² = 0.999). As an alternative indirect spectrophotometric method of CCl₄ determination, the proposed method was successfully applied to determine the concentrations of CCl₄ in several practical samples, showing merits of being sensitive and simple of operation.     

Spectrophotometric determination of microamounts of yttrium with 1-amino-4-hydroxyanthraquinone

Summary 1-amino-4-hydroxyanthraquinone (AMHA) is proposed as a spectrophotometric reagent for the determination of yttrium. The solution equilibria ofAMHA complexes with Y(III) have been studied spectrophotometrically in 50% (v/v) ethanol at 25°C and an ionic strength ofI=0.1 mol·dm^–3 (NaClO₄). The complexation reactions were investigated and characterized using graphical logarithmic analysis of the absorbance graphs. The composition, molar absorptivities, and stability constants of the chelates ofAMHA with Y(III) have been determined spectrophotometrically. A simple, rapid, selective, and sensitive method for the spectrophotometric determination of microamounts of Y(III) is developed based on the formation of the violet YLH⁺ complex with _max=580nm atpH 6.2(=0.98×10⁴l·mol^–1·cm^–1). Interferences and their elimination have been studied. Many foreign ions are tolerated in considerable amounts; 45–60 fold amounts of rare earths do not interfere with the determination of yttrium. In the determination of yttrium in synthetic polymetallic samples the relative error and relative standard deviation of the method were found to be better than 1 and 0.5%, respectively.

---

Spektrophotometrische Bestimmung von Mikromengen Yttrium mit 1-Amino-4-hydroxyanthrachinon

Zusammenfassung 1-Amino-4-hydroxyanthrachinon (AMHA) wird als spektrophotometrisches Reagens zur Bestimmung von Yttrium vorgeschlagen. Die Gleichgewichte von Komplexen ausAMHA und Y(III) in Lösung wurden in 50% (v/v) Ethanol bei 25°C und einer lonenstärke vonI=0.1M (NaClO₄) untersucht. Die Komplexierungsreaktionen wurden durch graphische logarithmische Analyse der Extinktionskurven charakterisiert. Die Zusammensetzungen, die molaren Extinktionen und die Stabilitätskonstanten der Chelate vonAMHA mit Y(III) wurden spektrophotometrisch bestimmt. Eine einfache, schnelle, selektive und empfindliche Methode zur spektrophotometrischen Bestimmung von Mikromengen Y(III) wurde entwickelt. Sie basiert auf der Bildung des violetten YLH⁺-Komplexes mit _max=580 nm beipH 6.2 (=0.98×10⁴l·mol^–1·cm^–1). Störungen und ihre Beseitigung werden ebenfalls diskutiert. Viele Fremdionen werden in beträchtlichen Mengen toleriert; 45–60 facher Überschuß an Seltenen Erden stört die Bestimmung von Yttrium nicht. Der relative Fehler und die relative Standardabweichung der Methode bei der Bestimmung von Yttrium in synthetischen polymetallischen Proben waren besser als 1 bzw 0.5%.

     

Spectrophotometric determination of trace amounts of uranium(VI) in water samples after mixed micelle-mediated extraction

A cloud point extraction process using mixed micelle of the cationic surfactant CTAB and non-ionic surfactant TritonX-114 to extract uranium(VI) from aqueous solutions was investigated. The method is based on the color reaction of uranium with pyrocatechol violet in the presence of potassium iodide in hexamethylenetetramine buffer media and mixed micelle-mediated extraction of complex. The optimal extraction and reaction conditions (e.g. surfactant concentration, reagent concentration, effect of time) were studied and the analytical characteristics of the method (e.g. limit of detection, linear range, preconcentration, and improvement factors) were obtained. Linearity was obeyed in the range of 0.20-10.00 ng mL⁻¹ of uranium(VI) ion and the detection limit of the method is 0.06 ng mL⁻¹. The interference effect of some anions and cations was also tested. The method was applied to the determination of uranium(VI) in tap water, waste-water and well water samples.     

Spectrophotometric and derivative spectrophotometric determination of copper (II) with dithizone in aqueous phase

A Spectrophotometric and derivative Spectrophotometric study of Cu-dithizonate complex in aqueous phase in the presence of Triton X-100, a neutral surfactant, is reported. The system obeys Beer's law between 1.0 × 10^–6–9.0 × 10^–6 mol/l of Cu²⁺; detection limit is 12 ng/ml. The molar absorption coefficient, specific absorptivity and Sandell's sensitivity of the complex are 3.06 × 10⁴ 1 mol^–1 cm^–1, 0.4825 ml g^–1 cm^–1 and 2.1 × 10^–3 g cm^–2, respectively. The conditional stability constant of the 1 2 complex, calculated considering simultaneously existing equilibria, has been found to be 1.73 × 10¹¹ I² mol² (I = 0.07, pH 1.4, temperature = 10 °C). Absorption studies in the derivative mode have been carried out to determine the absorption maximum of the complex and to overcome interference due to the presence of certain metal ions. The method has been validated by determination of copper in beers, wines, human hair, goat liver and fly ash samples.     

Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).     

Spectrophotometric determination and kinetic studies of condensation of aromatic aldehydes with 1,3-dimethylbarbituric acid

The condensation reaction of 1,3-dimethylbarbituric acid with aromatic aldehydes in ethanol has been investigated spectrophotometrically at 25–35°C. The reaction follows overall second-order kinetics, first-order each in reactant. From the dependence of the rate constants on temperature, activation parameters have been calculated. The rate of condensation increases with the presence of electron donating groups on the aromatic ring of the aldehyde. The rate-determining step involves dehydration of the aldol intermediate. The reaction was found to be catalyzed by HCl solutions. Based on this reaction, determination of 10 aromatic aldehydes in a concentration range of 0.13–70.25 μg/ml is proposed. The method was applied for determination of barbituric and 1,3-dimethylbarbituric acids also.     

Spectrophotometric determination of micro amounts of mercury,cadmium, and zinc by stepwise extraction with tribenzylamine

A rapid spectrophotometric method has been developed for the stepwise determination for mercury, cadmium, and zinc in mixtures. Optimal conditions have been established for the extraction efficiency of cadmium and mercury with a chloroform solution of tribenzylamine pre-equilibrated with hydrobromic acid. After addition of dithizone solution to the organic layers the absorbance at 490 nm or 510 nm is measured for mercury or cadmium, respectively. Even when the ratio of mercury, cadmium, and zinc is 10^-1 : 1 : 10^-5 , the metals can be determined successively.     

Spectrophotometric determination of trace ionic and non-ionic surfactants based on a collection on a membrane filter as the ion associate of the surfactant with Erythrosine B

The spectrophotometric method for the determination of trace surfactants with Erythrosine B (EB) based on the aqueous reaction and the collection on a membrane filter by filtration was studied. Cationic surfactants (CS⁺), such as a quaternary ammonium ion, and polyoxyethylene non-ionic surfactants (NS) in the presence of potassium ion, containing a long-chain alkyl group associate with EB buffered at pH 5.5. CS⁺ associates with anionic surfactants (AS⁻). For the determination of CS⁺, four methods were employed: the collection of the ion associate of CS⁺ with EB on a mixed cellulose ester (MCE) or PTFE membrane filter, the collection of the ion associate of CS⁺ with AS⁻ on a PTFE membrane filter followed by the ion exchange of AS⁻ with EB, and the first collection of CS⁺ followed by the second collection of EB on a PTFE membrane filter. For the determination of AS⁻, the collection of the ion associate of AS⁻ with CS⁺ on a PTFE membrane filter followed by the ion exchange of AS⁻ with EB was done. For the determination of NS, the ion associate of NS with EB was collected on a MCE membrane filter. The MCE membrane filter with the analyte was dissolved in methyl cellosolve. The analyte on the PTFE membrane filter was eluted with ethanol. The CS⁺ up to 5×10⁻⁷ M can be determined by the absorbance at 542 nm of the methyl cellosolve solution or the absorbance at 535 nm of the ethanol solution. The AS⁻ up to 5×10⁻⁷ M can be determined by the absorbance at 536 nm of the ethanol solution. The NS up to 2.53×10⁻⁶ M can be determined by the absorbance at 537 nm of the methyl cellosolve solution. This is the sensitive method for the determination of 10⁻⁸ to 10⁻⁷ M order of ionic surfactants and 10⁻⁷ to 10⁻⁶ M order of NS without toxic organic solvents.     

Kinetic, mechanistic and spectral investigation of ruthenium (III)-catalysed oxidation of atenolol by alkaline permanganate (stopped-flow technique)

Kinetics of ruthenium (III) catalyzed oxidation of atenolol by permanganate in alkaline medium at constant ionic strength of 0.30 mol dm³ has been studied spectrophotometrically using a rapid kinetic accessory. Reaction between permanganate and atenolol in alkaline medium exhibits 1 : 8 stoichiometry (atenolol : KMnO₄). The reaction shows first-order dependence on [permanganate] and [ruthenium (III)] and apparently less than unit order on both atenolol and alkali concentrations. Reaction rate decreases with increase in ionic strength and increases with decreasing dielectric constant of the medium. Initial addition of reaction products does not affect the rate significantly. A mechanism involving the formation of a complex between catalyst and substrate has been proposed. The active species of ruthenium (III) is understood as [Ru(H₂O)₅OH]₂₊. The reaction constants involved in the different steps of mechanism are calculated. Activation parameters with respect to the slow step of the mechanism are computed and discussed and thermodynamic quantities are also calculated.     

Alginate polyelectrolyte ionotropic gels. XIV. Kinetics and mechanism of formation of intermediate complex during the oxidation of alginate polysaccharide by alkaline permanganate with a spectrophotometric evidence of manganate(VI) transient species

The kinetics and mechanism of the [Alg.Mn ^VIO] intermediate complex formation during the oxidation of alginate polysaccharide at pHs ≥ 12 have been investigated spectrophotometrically. The reaction showed a first-order dependence in permanganate and a fractional order with respect to the alginate concentration (Alg). Kinetic and spectrophotometric evidence revealed the formation of manganate(VI) as transient species. The results obtained indicated the dependence of the rate of formation on the pH of the medium where the complex formation was base catalyzed. A mechanism consistent with the experimental results is discussed. © 1993 John Wiley & Sons, Inc.     

Kinetic method for determination of nanogram amounts of copper(II) by its catalytic effect on hexacynoferrate(III)-citric acid indicator reaction

This paper describes a highly sensitive, selective catalytic-kinetic-spectrophotometric method for the determination of copper(II) concentration as low as 6 ng ml⁻¹. The method is based on the catalytic effect of copper(II) on the oxidation of citric acid by alkaline hexacyanoferrate(III). The reaction was followed by measuring the decrease in absorbance of hexacyanoferrate(III) at 420 nm (λ_max of [Fe(CN)₆]³⁻, ∈ = 1020 dm³ mol⁻¹ cm⁻¹). The dependence of rate of the indicator reaction on the reaction variables has been studied and discussed to propose a suitable mechanism to get a relation between the reaction rate and [Cu²⁺]. A fixed time procedure has been used to obtain a linear calibration curve between the initial rate and lower [Cu²⁺] or log[Cu²⁺] in the range 1 × 10⁻⁷ to 4 × 10⁻⁴ mol l⁻¹ (6.35-25,400 ng ml⁻¹). The detection limit has been calculated to be 4 ng ml⁻¹. The maximum average error is 3.5%. The effect of the presence of various cations, commonly associated with copper(II) and some anions has also been investigated and discussed. The proposed method is sensitive, accurate, rapid and inexpensive compared to other techniques available for determination of copper(II) in such a large range of concentration. The new method has been successfully applied for the determination of copper(II) in various samples.     

Spectrophotometric Determination of Ziram by Coprecipitating the Corresponding Copper(II) or Palladium(II) Complex with Naphthalene

A spectrophotometric method has been developed for the determination of zinc dimethyldithiocarbamate (ziram) by converting it into dimethyldithiocarbamate and coprecipitating its copper(II) and palladium(II) dimethyldithiocarbamate complexes and coprecipitating onto microcrystalline naphthalene. Palladium(II) and copper(II) complexes absorb strongly at 395 nm and 430 nm, respectively. The interference of various ions has been studied and the method has been applied to determine ziram in commercial samples and grains.     

Spectrophotometric determination of nitrite based on its catalytic effect on the oxidation of carminic acid by bromate

A highly sensitive and selective method is described for the determination of trace amounts of nitrite based on its effect on the oxidation of carminic acid with bromate. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of carminic acid at 490 nm after 3 min of mixing the reagents. The optimum reaction conditions were 1.8×10⁻¹ mol l⁻¹ H₂SO₄, 3.8×10⁻³ mol l⁻¹ KBrO₃, and 1.2×10⁻⁴ mol l⁻¹ carminic acid at 30°C. By using the recommended procedure, the calibration graph was linear from 0.2 to 14 ng ml⁻¹ of nitrite; the detection limit was 0.04 ng ml⁻¹; the R.S.D. for six replicate determinations of 6 ng ml⁻¹ was 1.7%. The method is mostly free from interference, especially from large amounts of nitrate and ammonium ions. The proposed method was applied to the determination of nitrite in rain and river water.     

苦参碱在多壁碳纳米管修饰玻碳电极上的电催化氧化及其电分析方法

研究了苦参碱(Matrine, MT) 在多壁碳纳米管修饰玻碳电极(MWCNT/GCE)上的电化学行为. 与GCE相比, MT在MWCNT/GCE上峰电位负移120 mV, 峰电流增大约2.5倍, 表明MWCNT/GCE对MT的电化学氧化具有良好的催化作用. 同时测定并计算了MT在MWCNT/GCE上的电极过程动力学参数: 电子转移系数α、电极反应速率常数ks、扩散系数D. 运用差分脉冲伏安法对苦参碱样品含量进行测定, 相对标准偏差为0.12%～2.9%, 加标回收率为98.4%～99.0%. 该方法可用于MT的电化学定量测定.     

Spectrophotometric determination of trace amounts of cobalt with 2-hydroxybenzaldehyde-5-nitro-pyridylhydrazone in presence of surfactant after separation with Amberlite IRC-718 resin

2-Hydroxybenzaldehyde-5-nitro-pyridylhydrazone (2HB-5NPH) was synthesized and its application in the spectrophotometric determination of metal ions was studied in the presence of surfactants. A separation procedure, using a short column filled with Amberlite IRC 718, is proposed for the spectrophotometric determination of traces of cobalt. The influence of several ions, as interference, was discussed. The procedure was applied to determination of cobalt in mixture sample with satisfactory results (≥recovery 96%; relative error ≤2%; relative standard deviation ≤1.2% in the concentration range of 0.02–2.0 mg l⁻¹; detection limit, 0.01 mg l⁻¹ in solution). Control of the pH during the column operation is essential because the adsorption capacities are very sensitive to change in pH. Their separation was carried out in 0.005 M Malic acid, 1.5 M HCl, 2.0 M HNO₃ media.     

Mechanism of the oxidation reaction of Cu with N2O via nonadiabatic electron transfer

We treat the present work as an attempt to elucidate the mechanism of the oxidation reaction of the Cu atom by nitrous oxide based on our recent work (Kryachko, E. S.; Vinckier, C.; Nguyen, M. T. J Chem Phys 2001, 114, 7911) on the electron attachment to this molecule. We suggest that the title reaction in its Arrhenius regime occurs via the nonadiabatic electron transfer from Cu to the oxygen atom at the crossing of the potential energy surfaces Cu(4s ²S_1/2) + N₂O(X ¹Σ⁺) and Cu⁺ + N₂O^?, where the latter is linked to the complex N₂O^? originated from the higher‐energy T‐shape N₂O molecule and discovered in the aforementioned work. The calculations performed in the present work using a variety of quantum chemical methods support the proposed model. We also show the existence of other reaction pathways of the title reaction that, we believe, contribute to its non‐Arrhenius behavior observed experimentally at T > 1190 K. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

萘乙酸在多壁碳纳米管-离子液体复合修饰电极上的电催化氧化及电分析方法

运用循环伏安法(CV),计时库仑法(CC),计时电流法(CA)研究了萘乙酸(NAA)在玻碳电极(GCE),多壁碳纳米管修饰玻碳电极(MWCNTs/GCE)和多壁碳纳米管-离子液体修饰玻碳电极(MWCNTs-IL/GCE)上的电化学行为及电化学动力学性质.实验结果表明,NAA在GCE电极上于1.00V附近有一不可逆氧化峰...     

Spectrophotometric determination of microamounts of quercetin based on its complexation with copper(II)

The complexation process of the transition metal Cu(II) with quercetin was studied. The investigation was conducted spectrophotometrically in ethanol at the maximum absorption wavelength of 458.5 nm. Cu(II)—quercetin complex composition (1: 1) was determined using the Job, Harvey—Manning, and mole ratio methods. Complex stability constant was calculated by the Job and mole ratio methods and the respective logarithm values were 7.53 ± 0.25 and 7.44 ± 0.03. A new method for quantitative determination of the quercetin content in solution was developed in this work. At the optimal conditions quercetin was determined in concentrations ranging from 0.202 to 1.006 μg cm⁻³ with relative standard error of 2.5 % to 5.5 %. The lower detection limit was 0.067 μg cm⁻³. The method was found very accurate, reproducible, and sensitive, capable to determine microamounts of quercetin in pharmaceutical preparations.     

熔融萘萃取铁(Ⅱ)-4,7-二苯基-1,10-菲啰啉-四苯硼酸盐三元络合物光度法测定铁

研究了以熔融萘作为萃取剂,以4,7 二苯基 1,10 菲口罗啉作为显色剂,测定天然水中微量铁的分光光度法。在pH4的条件下,铁(Ⅱ)与4,7 二苯基 1,10 菲口罗啉和四苯硼酸盐能够形成红色三元络合物。在熔融萘存在下,此络合物可以迅速萃入熔融萘。将含有络合物的萘冷却、固化、分离,配制成25mL丙酮溶液,对其进行分光光度分析。实验表明,该络合物最大吸收波长为534nm,摩尔吸光系数和桑德尔灵敏度分别为2×104L·mol-1·cm-1和0.0025μg/cm2,铁(Ⅱ)的质量浓度在0～2 0μg/mL的范围内符合比耳定律。大多数常见离子不干扰测定。已应用于天然水中微量铁的测定。