双亲性三嵌段共聚物/水体系超分子结构的研究

利用小角 X-射线散射技术研完了双亲性聚氧化乙烯-聚二甲基硅氧烷-聚氧化乙烯三嵌段共聚物/水体系在高浓度的溶致性液晶相,测定了亲水区、疏水区随浓度和结构变化的尺寸等超分子结构参数。用简单的几何模型可满意地解释实验结果。     

聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物/聚苯醚共混物的相容性和结晶行为

 本工作对聚氧化乙烯-聚苯乙烯-聚氧化乙烯(PEO-PS-PEO)三嵌段共聚物与聚苯醚(PPO)均聚物共混物的相容性及结晶行为进行了研究。结果表明,共混体系的相容性与嵌段共聚物中苯乙烯段的含量有关,PS含量越高,PPO与共聚物PS段的相容性越好。共混体系的结晶行为也明显不同于一般均聚物共混体系。在DSC降温结晶过程中最多可出现三个结晶峰。     

结晶嵌段共聚物及其共混体系的研究进展

本文综述了近年来结晶嵌段共聚物及其共混体系的理论和实验研究成果。     

聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物/聚苯醚共混物的相容性和结晶行为

本工作对聚氧化乙烯-聚苯乙烯-聚氧化乙烯(PEO-PS-PEO)三嵌段共聚物与聚苯醚(PPO)均聚物共混物的相容性及结晶行为进行了研究。结果表明,共混体系的相容性与嵌段共聚物中苯乙烯段的含量有关,PS含量越高,PPO与共聚物PS段的相容性越好。共混体系的结晶行为也明显不同于一般均聚物共混体系。在DSC降温结晶过程中最多可出现三个结晶峰。     

聚甲基丙烯酸甲酯-聚四氢呋喃嵌段共聚物微观结构的研究

我们用SAXS、TEM等方法研究了分子量分散性较大的PMMA-b-PTHF两嵌段共聚物的微相结构。试样的分子量多分散系数为1.99,PMMA的重量分数为0.48。实验结果表明,其平衡微相结构并不是层状微区,而是在尺寸上也具有一定分散性的球状微区,微区之间并未形成三维有序的大晶格结构,而是一种无规聚集结构。这和单分散两嵌段共聚物理论所预言的结果是不同的。     

嵌段共聚物的微相分离和形态

嵌段共聚物的微相分离行为和形态的研究是当前多相高聚物研究中众所瞩目的研究内容,无论从基础理论和应用实际都有其极为重要的意义,因此在这方面的研究已有不少报道,并日趋深入。 以最简单的嵌段共聚物A—B为例,如聚苯乙烯—聚异戊二烯二嵌段共聚物     

聚苯乙烯-乙丙共聚物两嵌段共聚物的组成分析

本文用红外光谱(IR)的工作曲线法及傅里叶变换红外光谱(FT-IR)差谱法,分析了多单体嵌段共聚物聚苯乙烯-乙丙共聚物PS-b-EPR的组成,包括聚苯乙烯段的含量和乙丙共聚物段的乙丙组成。     

非线形嵌段共聚物的合成

主要介绍了非线形嵌段共聚物,如星型嵌段共聚物、杂臂星型共聚物、梳型聚合物等的合成方法,包括多官能团引发剂法、大分子引发剂法等。各种活性聚合方法,如阳离子开环聚合、原子转移自由基聚合(ATRP)和氮氧稳定自由基聚合等都可以用于合成非线形嵌段共聚物。     

含聚联烯的三嵌段共聚物的合成

聚联烯由于其特殊的结构而使其具有一些独特的应用,但聚合方法的局限性限制了聚联烯共聚物的研究.合成了一种偶氮-TEMPO（2,2,6,6-四甲基哌啶氮氧自由基）双官能团引发剂,通过苯基联烯醚单体的自由基聚合和苯乙烯的NMRP（氮氧调控自由基聚合）活性聚合,制备了聚苯乙烯-b-聚联烯-b-聚苯乙烯三嵌段共聚物.通过这种机理...     

Quantifying Polymer Swelling Employing a Linear Variable Differential Transformer: CO2 Effects on SBS Triblock Copolymer

A linear variable differential transformer (LVDT) was employed to evaluate CO₂‐polymer plasticization. Preliminary results on polystyrene‐block‐polybutadiene‐block‐polystyrene (SBS) elastomer are presented. At 22 °C under CO₂ pressure, SBS undergoes compression due to hydrostatic pressure. However, sample expansion occurs upon depressurization. At 45 °C, SBS undergoes swelling of 0.7% due to CO₂ plasticization, while no post‐pressurization expansion is observed. The contrasting result is explained by change in PS domain mobility and discontinuity in the density‐pressure relationship.

Linear displacement of SBS as a function of time at 56 and 134 bar CO₂.     

苯乙烯-丁二烯-苯乙烯嵌段共聚物负载Pt催化肉桂醛制备肉桂醇的研究

用紫外光交联的方法制备不同交联度的苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)负载Pt的催化膜并探讨其对肉桂醛选择性加氢制备肉桂醇的催化效果.其中催化剂Pt纳米簇用微波法制备,XRD测其平均粒径为3.7 nm.膜载催化剂的负载量、光交联剂三羟甲基丙烷三丙烯酸酯(TMPTA)和光引发剂二苯甲酮(BP)的用量均为3%.用色谱-质谱联用、XRD、紫外分光光度计对膜载催化剂和反应产物进行了表征,结果表明,随着交联度的增加,肉桂醇的催化选择性先增后减,紫外光光照80s时,负载膜交联度23.63%,肉桂醛转化率为91.46,肉桂醇选择性80.98%.质谱分析表明交联度大于30%后,催化产物中开始有膜分解产生的小分子杂质出现,并随交联度的进一步增大而增多;显微镜检测同时说明此时膜结构发生变化,造成肉桂醇选择性的降低.     

Monte‐Carlo Study of Triblock Copolymer/Homopolymer Blend Films

The morphologies of triblock copolymer/homopolymer blend films confined between two neutral hard walls were studied via MC simulations on a simple cubic lattice. For ABA/A and ABA/B blend films, the effects of φ_h (the volume fraction of the homopolymer) and M_h/M_b (the ratio of the molecular mass of the homopolymer to that of the corresponding blocks) on the morphologies were investigated in detail. For both ABA/A and ABA/B blend films, a higher φ_h or M_h/M_b would result in stronger macrophase separation between the triblock copolymer and homopolymer. For ABA/C blend films, M_h/M_b hardly influences the morphologies of homopolymer domains regardless of whether the homopolymer C is more compatible with block A or with block B. Compared to AB/A and AB/C blend films, the morphologies of ABA/A (or ABA/B) and ABA/C blend films are much more irregular. The simulated results in this work show good consistency with experiments and other simulations.

     

线形苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)的粘弹弛豫与相形态

研究了不同温度下苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)的粘弹弛豫与相形态. DSC分析发现, SBS的相结构特别是其中质量分数较低的PS相畴的大小受热历史影响显著. 用TEM表征了SBS的双相连续形态和两相相畴尺寸. 用动态流变学方法研究了不同温度下SBS嵌段大分子的松弛行为. 结果表明, 在低于PS相玻璃化转变温度时, 嵌段分子中的PB段已可发生运动; 而当高于PS玻璃化转变温度后, 由于PB与PS间的相互作用及PB的链缠结所限制, 体系仍保持较高的弹性模量, 呈现“第二平台”特征流变行为.     

Self-assembled and Nanostructured Copolymer Aggregations of the Tertiary Amine Methacrylate Based Triblock Copolymers

The micellization behavior of novel tertiary amine methacrylate-based ABA type triblock copolymers formed by poly[2-(dimethylamino)ethyl methacrylate] [PDMA] middle block and poly[2-(diethylamino)ethyl methacrylate] [PDEA] or poly[2-(diisopropylamino)ethyl methacrylate] [PDPA] side blocks, PDPA_m-b-PDMA_n-b-PDPA_l, and PDEA_m-b-PDMA_n-b-PDEA_l was investigated. Both types of triblock copolymers were water-soluble and had potential for various applications due to their self-assembled and the bottom-up nanoscale micellar construction. The micellar aggregations of the triblock copolymers in aqueous solutions with varying comonomer ratios, molecular weights, temperatures, and pH values were investigated by small-angle X-ray scattering and dynamic light scattering. Compact micellar aggregations were obtained as 0.5 weight percent solutions at 20–21°C and pH 8.67 to 9.05, and characterized as polydispersed spherical core-shells. One group of triblock copolymer micelles had PDPA-cores with radii from 18 to 21 Å and PDMA-shell thicknesses of 89–105 Å, whereas the other group had PDEA-core spherical micelles with core radii of 60–62 Å and a PDMA-shell thicknesses of 64–66 Å.     

两亲性聚肽三嵌段共聚物的自组装行为

通过开环反应,合成了聚（L-谷氨酸-γ-苯甲酯）-b-聚乙二醇-b-聚（L-谷氨酸-γ-苯甲酯）（PBLG-b-PEG-b-PBLG）三嵌段聚肽共聚物。运用核磁共振氢谱和凝胶渗透色谱表征了聚合物的结构。凝胶渗透色谱测试表明合成的聚合物分子量分布窄。以选择性溶剂透析的方法制备了自组装聚集体,通过透射电子显微镜、扫描电子显...     

三嵌段共聚物PAN-b-PEG-b-PAN的合成及其自组装行为的研究

利用原子转移自由基聚合(ATRP)制得了分子量可控、分子量分布窄的聚丙烯腈-b-聚乙二醇-b-聚丙烯腈P(AN-b-PEG-b-PAN)嵌段共聚物. 通过¹H NMR, FTIR, 凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了表征并通过TG和DTA考察了该嵌段共聚物的热稳定性; 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇在溶剂水中胶束的形成、结构、形貌和胶束粒径. 结果表明, 三嵌段共聚物P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇的热稳定性较纯聚乙二醇P(EG)好, 且柔性链PEG的引入对嵌段共聚物的放热峰位置没有显著的影响. 当改变此嵌段共聚物溶液浓度时, 该嵌段共聚物会自组装成不同形状的胶束, DLS测量的胶束粒径大于TEM观察的结果, 其临界胶束浓度(cmc)约为4.46×10^－4 g•L^－1.