Unique cellular interaction of silver nanoparticles: size-dependent generation of reactive oxygen species

The rapid advancement of nanotechnology has created a vast array of engineered nanomaterials (ENMs) which have unique physical (size, shape, crystallinity, surface charge) and chemical (surface coating, elemental composition and solubility) attributes. These physicochemical properties of ENMs can produce chemical conditions to induce a pro-oxidant environment in the cells, causing an imbalanced cellular energy system dependent on redox potential and thereby leading to adverse biological consequences, ranging from the initiation of inflammatory pathways through to cell death. The present study was designed to evaluate size-dependent cellular interactions of known biologically active silver nanoparticles (NPs, Ag-15 nm, Ag-30 nm, and Ag-55 nm). Alveolar macrophages provide the first defense and were studied for their potential role in initiating oxidative stress. Cell exposure produced morphologically abnormal sizes and adherence characteristics with significant NP uptake at high doses after 24 h. Toxicity evaluations using mitochondrial and cell membrane viability along with reactive oxygen species (ROS) were performed. After 24 h of exposure, viability metrics significantly decreased with increasing dose (10-75 microg/mL) of Ag-15 nm and Ag-30 nm NPs. A more than 10-fold increase of ROS levels in cells exposed to 50 microg/mL Ag-15 nm suggests that the cytotoxicity of Ag-15 nm is likely to be mediated through oxidative stress. In addition, activation of the release of traditional inflammatory mediators were examined by measuring levels of cytokines/chemokines, including tumor necrosis factor (TNF-alpha), macrophage inhibitory protein (MIP-2), and interleukin-6 (IL-6), released into the culture media. After 24 h of exposure to Ag-15 nm nanoparticles, a significant inflammatory response was observed by the release of TNF-alpha, MIP-2, and IL-1beta. However, there was no detectable level of IL-6 upon exposure to silver nanoparticles. In summary, a size-dependent toxicity was produced by silver nanoparticles, and one predominant mechanism of toxicity was found to be largely mediated through oxidative stress.     

Fluorescence-enhanced optical sensor for detection of Al<Subscript>3+</Subscript> in water based on functionalised nanoporous silica type SBA-15

An organic–inorganic hybrid optical sensor (PQ-SBA-15) was designed and prepared through functionalisation of the SBA-15 surface with 3-piperazinepropyltriethoxysilane followed by covalently attaching 8-hydroxyquinoline. Characterisation techniques, including FT-IR, thermal gravimetric, N2 adsorption-desorption and X-ray powder diffraction analyses, showed that the organic moieties were successfully grafted onto the surface of SBA-15 without the SBA-15 structure collapsing. The evaluation of the sensing ability of PQ-SBA-15 using fluorescence spectroscopy revealed that the PQ-SBA-15 was a selective fluorescence enhancement-based optical sensor for Al³⁺ in water in the presence of a wide range of metal cations including Na⁺, Mg²⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ with a limit of detection of 8.8 × 10–7 M. In addition, good linearity was observed between the fluorescence intensity and the concentration of Al³⁺.     

Synthesis of palladium nanoparticles on organically modified silica: Application to design of a solid-state electrochemiluminescence sensor for highly sensitive determination of imipramine

Organically modified silica substrate containing amine and vinyl functional groups were used for reduction and stabilization of palladium nanoparticles. Uniform spherical nanoparticles of palladium with average diameter of 10 nm were formed on silica substrate by direct contact of the substrate with an aqueous solution of palladium precursor, without the addition of any chemical reducer. Moreover, a sensitive and selective solid state electrochemiluminescence sensor was fabricated for the determination of imipramine, based on Ru(bpy)₃²⁺-palladium nanoparticles doped carbon ionic liquid electrode. In this process, imipramine acts as a co-reactant for Ru(bpy)₃²⁺. It is believed that the enhancement of the electrochemiluminescence signal in the presence of palladium nanoparticles in the composite is due to palladium catalytic effect on electrochemical and also chemical process involved in formation of Ru(byp)₃²⁺*. In addition, the results confirmed that, the rigid composite electrode shows the characteristic of microelectrode arrays. The proposed method was applied to the determination of imipramine in tablets and urine samples. The electrochemiluminescence intensity showed good linearity with the imipramine concentration from 1–100 pM, with a detection limit of 0.1 pM.     

Synthesis of keratine,silver, and flavonols nanocomposites to inhibit oxidative stress in pancreatic beta-cell (INS-1) and reduce intracellular reactive oxygen species production

Flavonols (FLA) from Vaccinium macrocarpon (V. macrocarpon) were identified using high-performance liquid chromatography coupled with mass spectrometry detection. Nanoparticles were prepared using highly crosslinked keratin (KER) from human hair and silver and entrapped with flavonols [KER + FLA + AgNPs]. Nanocomposites were characterized using UV–Vis spectroscopy, transmission electron microscopy (TEM), X-ray diffraction, zeta potential, and dynamic light scattering, and release profiles. The interactions between the capping agent and the silver core have been investigated using FTIR spectroscopy·H₂O₂ is a source of Reactive Oxygen Species (ROS) and acts as an activator of oxidative stress affecting NS-1 cells, and the protective effect of the nanocomposites were evaluated against H₂O₂-induced pancreatic β-cell damage. LC-MS/MS and HPLC analyses revealed the presence of 12 flavonols in V. macrocarpon plant extract. The cell apoptosis and proliferation, were evaluated by Hoechst 33342 staining, flow cytometry and Cell Counting Kit-8 respectively. Preincubation of the NS-1 cells with 250 µg/mL of H₂O₂ induced oxidative stress conditions that show pancreatic β-cell dysfunction, including ROS, cell death, mitochondrial function, antioxidant enzymes, and lipid peroxidation. Nevertheless, pretreatment with FLA and [KER + FLA + AgNPs] prevented mitochondria disruption, maintained cellular ATP levels, inhibited LDH release, intracellular ROS production, decreased lipid peroxidation, increased expression of antioxidant enzymes (CAT, SOD, and GPx) and GSH levels. These results indicate that nanocomposites could protect rat INS-1 pancreatic β-cell from H₂O₂-induced oxidative damage, apoptosis and proliferation by reducing the production of intracellular reactive oxygen species.     

The embedding of meta-tetra(hydroxyphenyl)-chlorin into silica nanoparticle platforms for photodynamic therapy and their singlet oxygen production and pH-dependent optical properties

This study relates to nanoparticle (NP) platforms that attach to tumor cells externally and only deliver singlet oxygen for photodynamic therapy (PDT) while conserving the embedded photosensitizers (PS). As a model, we demonstrate the successful embedding of the PS meta‐tetra(hydroxyphenyl)‐chlorin (m‐THPC) in NP that are based on a sol–gel silica matrix and also show its positive effect on the singlet oxygen production. The embedding of m‐THPC inside silica NP is accomplished by a modified Stöber sol–gel process, in which (3‐aminopropyl)‐triethoxysilane is introduced during the reaction. Singlet oxygen delivery by the targetable photodynamic NP exceeds that from free PS molecules. In the physiological pH range, there is no significant pH‐induced decrease in the fluorescence of m‐THPC embedded in silica NP, which might otherwise affect the efficiency of PDT.     

Oxidative modifications of the Photosystem II D1 protein by reactive oxygen species: from isolated protein to cyanobacterial cells

Action of reactive oxygen species (ROS) on the isolated D1 protein, a key component of Photosystem II (PSII) complex, was studied and compared with the effect of high irradiance on this protein in mildly solubilized photosynthetic membranes and cells of the cyanobacterium Synechocystis. Whereas singlet oxygen caused mainly protein modification reflected by shift of its electrophoretic mobility, action of hydrogen peroxide and superoxide resulted in generation of specific fragments. Hydroxyl radicals as the most ROS induced fast disappearance of the protein. The results substantiate the ability of ROS to cause direct scission of the D1 peptide bonds. Similar D1 modification, fragmentation and additionally cross-linking with other PSII subunits were observed during illumination or hydrogen peroxide treatment of mildly solubilized thylakoids. Peroxide-induced fragmentation did not occur in thylakoids of the strain lacking a ligand to the nonheme iron, confirming the role of this prosthetic group in the D1-specific cleavage. The D1 modification, fragmentation and cross-linking were suppressed by ROS scavengers, supporting the direct role of ROS in these phenomena. Identical symptoms of the ROS-induced D1 damage were detected in illuminated cells of Synechocystis mutants with a higher probability of ROS formation, documenting the relevance of the in vitro results for the situation in vivo.     

Enhanced electrochemiluminescence from luminol at multi-walled carbon nanotubes decorated with palladium nanoparticles: a novel route for the fabrication of an oxygen sensor and a glucose biosensor

Incorporation of palladium nanoparticles on the surface of multi-walled carbon nanotubes and modification of glassy carbon electrode with the prepared nano-hybrid material led to the fabrication of a novel electrode. The modified electrode showed attractive electrocatalytic activity and sensitizing effect on luminol-O(2) and luminol-H(2)O(2) electrochemiluminescence (ECL) reactions at neutral media. The sensitized luminol-O(2) and luminol-H(2)O(2) reactions were successfully applied for the ECL determination of dissolved O(2) and glucose, respectively. Under the optimal conditions for luminol-O(2) system, the ECL signal intensity of luminol was linear with the concentration of dissolved oxygen in the range between 0.08 and 0.94 mM (r=0.9996) and for luminol-H(2)O(2) system, the ECL signal intensity of luminol was linear with the concentration of glucose in the range between 0.1 and 1000 μM (r=0.9998). The limits of detection (S/N=3) for dissolved oxygen and glucose were 0.02 mM and 54 nM, respectively. The relative standard deviations (RSD) for repetitive measurements of 0.50 mM oxygen (n=10) and 10 μM glucose (n=30) were 3.5% and 0.3%, respectively. Also, under the optimal conditions for luminol-H(2)O(2) system, the ECL signal intensity of luminol was linear with the concentration of H(2)O(2) in the range between 1 nM and 0.45 mM (r=0.9997). The limit of detection (S/N=3) for H(2)O(2) detection was 0.5 nM and the relative standard deviation for repetitive measurements of 10 μM H(2)O(2) (n=10) was 0.8%.     

Nano–silica functionalized with thiol–based dendrimer as a host for gold nanoparticles: An efficient and reusable catalyst for chemoselective oxidation of alcohols

In this paper, we present the synthesis of Au nanoparticles supported on nanosilica thiol based dendrimer, nSTDP. The catalyst was prepared by reduction of HAuCl₄ with NaBH₄ in the presence of nSTDP. The resulting Au_np–nSTDP materials were characterized by FT–IR and UV–vis spectroscopic methods, SEM, TEM, TGA, XPS and ICP analyses. The characterization of the catalyst showed that Au nanoparticles with the size of 2–6 nm are homogeneously distributed on the nSTDP dendrimer with a catalyst loading of about 0.19 mmol/g of catalyst. The Au_np–nSTDP catalyst was used in the oxidation of alcohols with tert–butyl hydroperoxide (TBHP) as oxidant. The influence of vital reaction parameters such as solvent, oxidant and amount of catalyst on the oxidation of alcohols was investigated. These reactions were best performed in an acetonitrile/water mixture (3:2) in the presence of 0.76 mol% of the catalyst on the basis of the Au content at 80 °C under atmospheric pressure of air to afford the desired products in high yields (80–93% for benzyl alcohols). The Au_np–nSTDP catalyst exhibited a high selectivity toward the corresponding aldehyde and ketone (up to 100%). Reusabiliy and stability tests demonstrated that the Au_np–nSTDP catalyst can be recycled with a negligible loss of its activity. Also this catalytic exhibited a good chemoselectivity in the oxidation of alcohols.     

Generation of reactive low-valent titanium species using metal--arenes as efficient organic reductants for TiCl(3): applications to organic synthesis

A comprehensive study on the use of metal-arene systems as organic reductants for TiCl(3) has resulted in an efficient method for the generation of highly reactive low-valent titanium (LVT) reagents. The activated titanium species could be prepared by refluxing a mixture of substoichiometric amounts of arenes, TiCl(3), and Li/Mg in THF or DME. Among the LVT reagents screened, TiCl(3)--Li--naphthalene--THF (reagent I) was the best for coupling of carbonyls to olefins. The reagent could carry out the McMurry olefination of both aromatic and aliphatic substrates at a lower temperature and in a much reduced time as compared to the conventional procedures. Subtle changes in the method of preparation of the LVT reagents influenced the stereoisomeric ratio of the olefins. The reagent was also useful for the synthesis of O- and N- heterocycles and vicinal diamines via intramolecular carbonyl coupling and reductive duplication of imines, respectively.     

Probing the effect of nitrate anion in CAN: An additional opportunity to reduce the catalyst loading for aerobic oxidations

Catalyzed by cerium ammonium nitrate (CAN), the oxidative cracking reaction of alkenes occurred to produce carbonyls in good yields under mild conditions. The reaction employed molecular oxygen (O₂) as the safe and clean oxidant. The catalyst dosage was reduced to as low as 0.5 mol%, while no additive was required. Thus, it may afford a generally green synthetic approach for introducing oxygen into organic molecules as well as the biomass degradation and the resource recycling from the C=C bond-containing waste polymers. X-ray photoelectron spectroscopy (XPS) analysis and control experiments demonstrated that the process proceeded via a single electron transfer (SET) reaction-initiated free radical reaction mechanism. In the process, both Ce and NO₃⁻ acted as the oxygen carrier to promote the oxidation reaction. The application of the abundantly existed nitrate in CAN was found to be the key for reducing the catalyst loading.     

A fluorescent molecular sensor for pH windows in traditional and polymeric biocompatible micelles: comicellization of anionic species to shift and reshape the ON window

A new approach is presented to obtain fluorescent sensors for pH windows that work in water and under biomimetic conditions. A single molecule that features all-covalently linked components is used, thus making it capable of working as a fluorescent sensor with an OFF/ON/OFF response to pH value. The components are a tertiary amine, a pyridine, and a fluorophore (pyrene). The forms with both protonated bases or both neutral bases quench the pyrene fluorescence, whereas the form with the neutral pyridine and protonated amine groups is fluorescent. The molecular sensor is also equipped with a long alkyl chain to make it highly hydrophobic in all its protonated and unprotonated forms, that is, either when neutral or charged. Accordingly, it can be confined at any pH value either in traditional (i.e., low-molecular-weight) nonionic surfactant micelles or inside polymeric, biocompatible micellar containers. Relevant for future applications in vivo, thanks to its strong hydrophobicity, no leakage of the molecular sensor is observed from the polymeric biocompatible micelles. Due to the proximity of the pyridine and amine functions in the molecular structure and the poor hydration inside the micelles, the observed pK(a) values are low so that the ON window is positioned at very low pH values. However, the window can be shifted to biologically relevant values by comicellization of anionic species. In particular, in the micelles of the nonionic surfactant TritonX-100, a shift of the ON window to pH 4-6 is obtained by addition of the anionic sodium dodecyl sulphate surfactant, whose negative charge promotes the stability of the protonated forms of the pyridine and amine fragments. In the case of the polymeric micelles, we introduce the use of the amphiphilic polystyrene sulfonate anionic polyelectrolyte, the comicellization of which induces a shift and sharpening of the ON window that is centered at pH 4.     

Mechanism of action of sensors for reactive oxygen species based on fluorescein-phenol coupling: the case of 2-[6-(4'-hydroxy)phenoxy-3H-xanthen-3-on-9-yl]benzoic acid

We demonstrate the ability of a sensor containing a tethered fluorescein-phenol structure to react with peroxyl radicals and with an oxidizing agent such as potassium ferricyanide. This latter reaction yields the corresponding peroxyl radical as observed by EPR analysis. We propose that the reaction of the sensor with peroxyl and alkoxyl radicals is also initiated by the formation of the phenoxyl radicals, which is followed by radical-radical reactions and product hydrolysis responsible for the release of fluorescein. The proposed mechanism is based on results obtained by laser flash photolysis, HPLC and EPR studies of the reaction of peroxyl and alkoxyl radicals with 4-phenoxylphenol, a molecule used to mimic the behavior of the sensor.     

An optical chemical sensor based on functional polymer films for controlling sulfur dioxide in the air of the working area: Acrylonitrile and alkyl methacrylate copolymers with brilliant green styrene sulfonate

The effects of the chemical and phase composition of acrylonitrile and alkyl methacrylate (Alkyl-MA) copolymers with styrene sulfonates (SS) of triphenylmethane dye cations on the gas permeability and sensing properties of their films were studied for developing an optical chemical sensor (OCS) for sulfur dioxide (SO₂) on the basis of functional polymers. Of the three triphenylmethane dyes tested, namely, fuchsine, Crystal Violet, and Brilliant Green (BG), only the last dye was selected for molecular design. It was shown that the copolymer of Decyl-MA with SS—BG with the degree of modification DM = 0.10 is the best material among the studied ones from the viewpoints of sensitivity, response time, and time stability of sensor characteristics. The conditions for fabricating polymer films and the parameters of their functioning in OCSs for SO₂ were optimized. The effect of annealing conditions on the sensitivity of spectra to SO₂ was studied. Working temperature, working wavelength, and the conditions for the regeneration of the initial spectral parameters were optimized. Calibration characteristics of OCSs for the dynamic admittance of SO₂—air mixtures were obtained. The calculated detection limit for SO₂ in an air flow for a sensor with a sensing film fabricated of the decyl-MA—SS—BG copolymer with DM = 0.10 was 0.16 vol %, or 4160 mg/m³. This points to the necessity of searching for more sensitive sensing materials among other classes of functional polymers.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 3, 2005, pp. 307–315.Original Russian Text Copyright © 2005 by Soborover, Tverskoi, Tokarev.     

A facile green synthesis of silver nanoparticles: An investigation on catalytic hydroxylation studies for efficient conversion of aryl boronic acids to phenol

Ag nanoparticles (AgNPs) catalyst material is bio-synthesized and fully examined using various spectroscopy and microscopy techniques. Further this synthesized material is used for hydroxylation reaction, for this purpose we developed a simple and versatile bio-based method from aryl boronic acids to phenol. The reaction was studied in the presence of low cost ligand in a hydrated reaction medium without any hazardous organic solvents, as a result a finite amount of yield was achieved in short time (<15 min). The hydroxylation reaction is further carried out in a series of different arenes substituted samples with good amount of yields.     

An integrated computational tool for the study of the optical properties of nanoscale devices: application to solar cells and molecular wires

We present a combined computational strategy for the study of the optical properties of nanoscale systems, using a combination of codes and techniques based on Density Functional Theory (DFT) and its Time Dependent extension (TDDFT). In particular, we describe the use of Car–Parrinello molecular dynamics simulations for the study of nanoscale devices and show the integration of the obtained results with available quantum chemistry codes for the calculation of TDDFT excitation energies, including solvation effects by continuum solvation models. We review some prototypical applications of this integrated computational strategy, ranging from the interaction of dye sensitizers with TiO₂ nanoparticles, of interest in the field of dye-sensitized solar cells, to transition metal molecular wires exceeding 3 nm length.     

Collection and storage of CO2 for 13C analysis: An application to separate soil CO2 efflux into root- and soil-derived components

Soil surface CO2 efflux is comprised of CO2 from (i) root respiration and rhizosphere microbes and (ii) heterotrophic respiration from the breakdown of soil organic matter (SOM). This efflux may be partitioned between these sources using delta13C measurements. To achieve this, continuous flow isotope ratio mass spectrometry can be used and, in conjunction with 10 mL septum-capped vials, large numbers of samples may be analysed using a Finnigan MAT Delta(plus)XP interfaced to a Gas Bench II. Here we describe a number of advances to facilitate such work, including: (i) a technique for monitoring mass spectrometer performance, (ii) improvements to sample storage, and (iii) a gas-handling system for incubating and sampling the CO2 derived from roots and soils. Mass spectrometer performance was monitored using an automated refillable vial. Compressed air analysed with this system had mean delta13C of -9.61 +/- 0.16 per thousand (+/- 1sigma, n = 28) collected over four runs. Heating the butyl rubber septa used to seal the vials at 105 degrees C for 12 h improved the sample storage. After air transportation over 12 days, the isotope composition of the CO2 at ambient concentrations was unchanged (before: -35.2 +/- 0.10 per thousand, n = 4; after: -35.3 +/- 0.10 per thousand, n = 15); without heat treatment of the septa the CO2 became slightly enriched (-35.0 +/- 0.14 per thousand, n = 15). The linearity of the Gas Bench II was found to decline above 8000 micromol CO2 mol(-1). To stay within a linear range and to allow the incubation of soil and root material we describe a gas-handling system based around a peristaltic pump. Finally, we demonstrate these methods by growing a C-4 grass (Guinea grass, Panicum maximum Jacq.) in a C-3 soil. Root respiration was found to contribute between 5 and 22% to the soil surface CO2 efflux. These methodologies will facilitate experiments aimed at measuring the isotopic composition of soil-derived CO2 across a range of ecological applications.     

An easily organic–inorganic hybrid optical sensor based on dithizone impregnation on mesoporous SBA‐15 for simultaneous detection and removal of Pb(II) ions from water samples: Response‐surface methodology

In this study, a novel organic–inorganic hybrid adsorbent for single‐step detection and removal of Pb(II) ions based on dithizone (DZ) anchored on mesoporous SBA‐15 was fabricated. The designed solid optical sensor revealed rapid colorimetric responses and high selectivity. Central composite design (CCD) combined with desirability function (DF) was applied to evaluate the interactive effects and optimization of important variables such as pH value, mesoporous SBA‐15 dosage, contact time and initial concentration of Pb(II) ions and optimum conditions for each of the factors were obtained 6.0, 25 mg, 30 min and 20 μg ml^{− 1}, respectively. This adsorbent or solid optical chemo sensor exhibited a linear range of 1.0 to 100.0 μg ml⁻¹ of Pb(II) ion concentration with a detection limit of 0.07 μg ml⁻¹. This adsorbent was applied to determine and remove the Pb(II) in spiked samples. Various isotherm models such as Langmuir, Freundlich, Temkin and Dubinin–Radushkevich were studied for fitting the experimental equilibrium data. Langmuir model was chosen as an efficient model. Various kinetic models such as pseudo‐first, second order intraparticle, diffusion models were studied for analysis of experimental adsorption data and the pseudo second order model was chosen as an efficient model.