Synthesis, Characterization and Properties of Tri-substitute Potassium Salt of Trinitrophloroglucinol

The title complex [K3（TNPG）·（H2O）2]n was synthesized by the reaction of the aqueous solutions of trinitrophlomglucinol （TNPG） with KHCO3. The complex was characterized by elemental analysis and FTIR spectroscopy, and its single crystal structure was determined by X-ray diffraction analysis. The structural analysis demonstrates that two different coordination modes of K cations [K（1） and K（2）] are around TNPG^3- anions in complex [Ka（TNPG）·（H2O）2]n, where the coordination numbers are eight. All K atoms coordinate with O atoms of phenolic hydroxyl group and nitro-group simultaneously. The thermolysis of the [Ka（TNPG） · （H2O）2]n has been investigated by using differential scanning calorimetry （DSC） and thermogravimetry-derivative thermogravimetry （TG-DTG） at a heating rate of 10 ℃/min. The thermal decomposition processes of the title complex were comprised of one endothermic dehydration stage and one exothermic decomposition stage in 270-320℃, and the final decomposition residue contained KNC. Impact and friction sensitivity results of the complex revealed its sensitive nature towards mechanical stimuli. The experiments verified that the complex has some characteristics of explosive.     

Influence of a Hydrophobic Environment on the Structure of Arginine—Carboxylate Salt Bridge

The exact structure of an arginine-carboxylate salt bridge in different chemical environments remains a controversial problem.In the present work,the zwitterionic and neutral forms of arginine-carboxylate salt bridge were studied by the B3LYP/6-311G(d,p)//PM3 method.It turns out that the neutral forms are more stable than the zwitterionic coumterparts in gas phase.However,whnen bound by α-cyclodextrin,the zwitterionic forms become more stable than the corresponding neutral ones.It is suggested that the hydrophobic environment provided by the cyclodextrin cavity leads to such behavior.Therefore,the salt bridge still could be in a zwitterionic form in the hydrophobic interior of the real proteins.     

Reduction of Aldehydes and Ketones with Potassium Borohydride as Reductant

A series of aldehydes and ketones were reduced by potassium borohydride in an ionic liquid/water ([bmim]PF6/H2O) biphasic system to afford corresponding alcohol with high purity in excellent yields. The ionic liquid/water biphasic system could promote the chemoselectivity and the substituents such as nitro group and chlorine remained intact. Aromatic ketones were not as active as aromatic aldhydes and cyclic ketones owing to their higher steric hindrance. The ionic liquid could be recycled and reused. This protocol has notable advantages of no need of phase transfer catalyst and organic solvents, mild conditions, simple operation, short reaction time, ease work-up, high yields and recycling of the ionic liquid.     

Synthesis, Characterization and Two-Photon Absorption Properties of a Novel Pyridinium Salt

A novel pyridinium salt, 2,4-bis[p-(N,N-dimethylamino)styryll-N-metlayl pyridinium iodide (BMSPI) was synthesized and characterized by TG, ^1H NMR spectroscopy and elemental analysis, and the reaction process was studied by using ES-MS. When BMSPI was pumped by a pulsed 1064 nm, 50 ps laser beam, it manifests highly efficient TPA (Two-Photon Absorption) and up-conversion superradiance. The up-conversion efficiency was 6.0% at the pump energy of 4-6 mJ and the lifetime of two-photon fluorescence was measured as 59 ps.     

Organic Solvent Tolerance of an α-Amylase from Haloalkaliphilic Bacteria as a Function of pH,Temperature, and Salt Concentrations

A haloalkaliphilic bacterium was isolated from salt-enriched soil of Mithapur, Gujarat (India) and identified as Bacillus agaradhaerens Mi-10-6₂ based on 16S rRNA sequence analysis (NCBI gene bank accession, GQ121032). The bacterium was studied for its α-amylase characteristic in the presence of organic solvents. The enzyme was quite active and it retained considerable activity in 30% (v/v) organic solvents, dodecane, decane, heptane, n-hexane, methanol, and propanol. At lower concentrations of solvents, the catalysis was quite comparable to control. Enzyme catalysis at wide range of alkanes and alcohol was an interesting finding of the study. Mi-10-6₂ amylase retained activity over a broader alkaline pH range, with the optimal pH at 10–11. Two molars of salt was optimum for catalysis in the presence of most of the tested solvents, though the enzyme retained significant activity even at 4 M salt. With dodecane, the optimum temperature shifted from 50 °C to 60 °C, while the enzyme was active up to 80 °C. Over all, the present study focused on the effect of organic solvents on an extracellular α-amylase from haloalkaliphilic bacteria under varying conditions of pH, temperature, and salt.     

Determination of Stoichiometric Dissociation Constants of Benzoic Acid in Aqueous Sodium or Potassium Chloride Solutions at 25°C

Equations were determined for the calculation of the stoichiometric (molality scale) dissociation constant K_m of benzoic acid in dilute aqueous NaCl and KCl solutions at 25°C from the thermodynamic dissociation constant K_a of this acid and from the ionic strength I_m of the solution. The salt alone determines mostly the ionic strength of the solutions considered in this study and the equations for K_m were based on the single-ion activity coefficient equations of the Hückel type. The existing literature data obtained by conductance measurements and by electromotive force (EMF) measurements on Harned cells were first used to revise the thermodynamic value of the dissociation constant of benzoic acid. A value of K_a = (6.326 ± 0.005) × 10^-5 was obtained from the most precise conductivity set [Brockman and Kilpatrick] and this value is supported within their precisions by the less precise conductivity set of Dippy and Williams and by the EMF data set measured by Jones and Parton with quinhydrone electrodes. The new data measured by potentiometric titrations in a glass electrode cell were then used for the estimation of the parameters of the Hückel equations of benzoate ions. The resulting parameters were also tested with the existing literature data measured by cells with and without a liquid junction. The Hückel parameters suggested here are close to those determined previously for anions resulting from aromatic and aliphatic carboxylic acids. By means of the calculation method based on the Hückel equations, K_m can be obtained almost within experimental error at least up to I_m of about 0.5 mol-kg_-1 for benzoic acid in NaCl and KCl solutions.     

Characterization of an orphan Ra–Be neutron source

Journal of Radioanalytical and Nuclear Chemistry - An orphan radium-beryllium (Ra–Be) neutron source (Nuclear Chicago Corporation) detected inside a scrap metal shipping container, was seized...     

Isolation and Characterization of an Antimicrobial Polypeptide from Loach

Hydrobionts formed their special defense systems during evolution. One such system is that of non-specific immunity which comprises a wide variety of peptides with potent antimicrobial activities1. The mechanism of action of most antimicrobial peptides was reported as that a few peptide molecules formed a channel on cell membrane, and the cell was then died of the outflowing of cellular contents. The above mechanism was different from that of antibiotics2, 3. It is a promising area to disc…     

Synthesis and Characterization of a Novel Liquid Crystalline Chitin — Quaternary Ammonium Chitosan Salt

N-Butyl chitosan(NBCS) derivatives were prepared by introducing butyl groups into the amine groups of chitosan via Schiff base intermediates. The quaternization of NBCS was carried out by using ethyl iodide to produce water-soluble cationic polyelectrolytes. The degree of the substitution of the products was measured by means of the electron spectroscopy for a successful chemical analysis. The quaternary ammonium chitosan salt(QACS) was proved to be a novel cholesteric liquid crystalline chitin, by means of the polarized optical microscopy and the circular dichroism spectropolarimetry. The critical mass fraction of the QACS/formic acid solution forming a lyotropic liquid crystal phase was 50%, which was almost the same as that of the NBCS/formic acid solution, but much hiuher than that of the chitosan in the same solvent.     

The “supercompressed” state of matter as an investigation object in high-pressure chemistry

The prospects of a new line of research in high-pressure chemistry are discussed, which is associated with investigations of chemical reactions accompanied by large volume effects at ambient pressure and, hence, resulting in greater compressibilities of the reaction products. The compounds formed by intercalation of alkali metals in graphite and intermetallic compounds formed between alkali metals and silver or Group V metals (Sb, Bi), which crystallize with the BiF₃ structural type, are considered as examples of “chemical compression”. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1442–1447, August, 1999.     

Synthesis,Crystal Structure and Thermal Decomposition of a New Energetic Potassium Salt of Bis（dinitromethyl）difurazanyl Ether

A new energetic organic potassium salt bis(dinitromethyl)difurazanyl ether potassium salt [K2(BDFE)] was synthesized, and structurally characterized by elemental analysis, IR spectra, 13 C NMR and single-crystal X-ray diffraction. K2(BDFE) crystallizes in monoclinic system, space group C2/c with a = 17.342(3), b = 12.6943(17), c = 8.0972(11), β = 110.630(2)°, V = 1668.3(4)3, Z = 4, Dc = 2.000 g/cm3, F(000) = 1000, μ = 0.675 mm-1, S = 1.058, the final R = 0.0499 and wR = 0.1452. The K ion is eight-coordinated with eight O atoms from one water molecule and four bis(dinitromethyl)difurazanyl ethers(BDFE), forming a distorted dodecahedral structure. Thermal decomposition of the title complex was studied by using DSC and TG-DTG. There are primarily two exothermic decomposition processes between 200 and 370 ℃.     

Wet Carbon‐Based Solid Acid/Potassium Bromate as an Efficient Heterogeneous Reagent for Oxidation of Alcohols under Mild Conditions

Wet carbon‐based solid acid and potassium bromate were used as new reagent for oxidation of alcohols to their corresponding aldehyde or ketone derivatives in dichloromethane with good yields.     

Characterization of the Nanoscale Microstructure of an Immersion Silver on Sputtered Copper

1 INTRODUCTION Silver and its compounds have received much attention due to their current and potential applica- tions in many areas[1, 2]. As a metal with the highest electrical and thermal conductivities, silver was one of the most important noble metals used in electrical industries in the last century. Several decades ago, however, the development of silver application in electronic area seemed not so quick. The fear for some undesirable phenomena involving silver, like “electrochemi…     

Characterization of O-Carboxymethyl Chitosan – Gum Arabic Coacervates as a Function of Degree of Substitution

Three O-carboxymethylated chitosans (O-CMCs) with degrees of substitution (DS) 0.41, 0.51, and 0.83 were synthesized and the effects of the DS of O-CMC on its coacervation with gum Arabic (GA) and partial characteristics of resultant coacervates were investigated. All the O-CMCs exhibited the same optimum pH of 3.0 for coacervation with GA and the O-CMC–GA coacervates displayed similar differential scanning calorimetry (DSC) patterns, thermogravity (TG) profiles, and porous microstructures, but differed markedly in their rheological properties. As the O-CMC DS increased, the elasticity of the coacervates raised accordingly. It was concluded that O-CMC–GA coacervates with desired viscoelasticity can be obtained by varying the DS of O-CMC.     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

Polymerization of α-Methylstyrene with Potassium as Initiator. VII. Thermal Decomposition of the Reaction Products

The polymerization of α-methylstyrene, initiated with high concentrations of potassium in tetrahydrofuran and in p-dioxane or with a butyllithium-tetramethylethylenediamine complex in bulk, was carried out at temperatures above 25°C. The resulting products comprising varying proportions of both low (D + A of [Mbar]w = 2.0 to 4.0 × 10³) and high (B + C of [Mbar]W > 20.0 × 10³) molecular weight components were subjected to 50 min isothermal treatments at different temperatures. The poly-α-methylstyrene samples, prepared under the above mentioned solvent-conditions, which had similar proportions of components D + A and B + C, as characterized by gel permeation chromatography and nuclear magnetic resonance showed that their thermal stability decreased with the following order of solvent-conditions: Bulk > p-dioxane > THF. A comparison of the decomposition results obtained with polymers made up of components D + A and B + C and those made up exclusively of component B + C showed that the percent weight-loss and the decrease in molecular weight associated with the latter component B + C is more pronounced when the low molecular weight component D + A is present.     

Characterization of Super‐Absorbent Material Based on Carboxymethylcellulose Sodium Salt Prepared by Electron Beam Irradiation

Crosslinked CMC‐N/PAAm hydrogel were prepared using electron beam irradiation. The factors affecting the degree of crosslinking and swelling behavior of the prepared copolymer were determined. As the irradiation dose and/or PAAm concentration increase, the gel content increases. Preparation of super‐porous hydrogel was attained by the addition of ammonium carbonate as a gas‐blowing agent during the irradiation process. The surface morphology and pore structure of such a prepared hydrogel were examined using scanning electron microscopy. The ability of the prepared hydrogel to absorb and retain large amount of water and as simulating urine was measured. The results suggested the possible use of CMC‐Na/PAAm hydrogels in the personal care product industry.     

Syntheses and Crystal Structures of Two Coordination Polymers with Aromatic Dioxide as Bridge Ligands

Two coordination polymers, namely, two-dimensional complex 1 {[Cu(μ- L)1.5(ClO4)2(H2O)].(H2O)0.5}n (L = pyrazine-1,4-dioxide) and one-dimensional complex 2 [Co(μ-L)Br2(H2O)2]n, have been synthesized with pyrazine-1,4-dioxide as bridging ligands, and their crystal structures were determined by X-ray crystallography. Crystal data for complex 1: monoclinic system, space group C2/c, with a = 23.310(3), b = 12.2338(17), c = 10.6075(15) , β = 110.487(2)°, V = 2833.6(7) 3, Z = 8, C6H9Cl2CuN3O12.5, Mr = 457.60, Dc = 2.145 g/cm3, F(000) = 1832 and μ = 1.998 mm-1; and those for 2: monoclinic system, space group C2/c, with a = 11.012(3), b = 7.483(2), c = 11.451(3) , β = 101.654(4)°, V = 924.2(4) 3, Z = 4, C4H8Br2CoN2O4, Mr = 366.87, Dc = 2.637 g/cm3, F(000) = 700 and μ = 10.487 mm-1. 1 shows a two-dimensional sheet structure on the ac plane through the coordination of μ-L bridging ligands with Cu(II) ions, while 2 displays a zigzag one-dimensional chain along the c axis via the coordination of μ-L bridging ligand with Co(II) ions. Hydrogen bonds in 1 and 2 make the sheets (or chains) connect each other to form a three-dimensional structure.     

Fabrication, Characterization and Electrocatalysis of an Ordered Carbon Nanotube Electrode

A method for fabrication of ordered carbon nanotube (CNT) film,which was template-synthesized within the highly ordered pores of a commercially available alumina template membrane,modified glassy carbon(CNT/GC) electrode was established.The CNT/GC electrode showed excellent electrocatalytic activity toward dopamine electrochemical reaction without introducing any electrochemically active group into CNT film or activating any electrochemically active group into CNT film or activating the electrode electrochemically.DA undergoes ideal reversible electrochemical reaction on CNT/GC electrode at low scan rate(≤20mV/s) with an excellent reproducibility and stability.The CNT/GC electrode might be used in biosensors because the highly ordered CNT may present a steric effect on more efficient redox reactions of biomolecules.