Solid-state electropolymerization and doping of triphenylamine as a route for electroactive thin films

Solid-state electropolymerization could be a way to produce organic semiconductors with potential application as Hole Transporting Materials (HTMs) in hybrid organic-inorganic devices. Thereby, thin solid films of triphenylamine (TPA) deposited by spin coating on conducting glass substrates have been electrochemically treated by performing multiple voltammetric cycles between -0.4 V and 1.0 V vs. Ag/AgCl in a 0.5 M sodium perchlorate aqueous electrolyte. Subsequent characterization by means of in situ UV-Vis spectroscopy, in situ Electrochemical Quartz Crystal Microbalance, Atomic Force Microscopy, Contact Angle analysis, and Open Circuit Potential measurements reveals cross-linking of the monomeric units in the thin film. Such polymerized films are characterized by a high electroactivity linked to doping/undoping, a reversible electrochromic behavior under potentiodynamic conditions and fast changes of the open circuit potential upon illumination, indicating efficient charge transport throughout the film. While extensive polymerization has been demonstrated for TPA, this process is negligible in the case of tri-p-tolylamine, which is linked to the para substitution of the phenyl rings. In more general vein, the feasibility of solid-state electropolymerization is illustrated as well as the potential advantages of this methodology for the preparation of hybrid inorganic/organic materials based on nanoporous oxide matrices.     

Electrosynthesis of ambipolar electrochromic polymer films from anthraquinone–triarylamine hybrids

Two ester derivatives featuring anthraquinone as an interior core and terminal electroactive triphenylamine or carbazole groups were prepared by the condensation of 2,6‐dihydroxyanthraquinone with 4‐(diphenylamino)benzoyl chloride and 4‐(9H‐carbazol‐9‐yl)benzoyl chloride, respectively. The electrochemistry and electropolymerization of these monomers were investigated. The polymeric films were built onto ITO/glass surface by repetitive cyclic voltammetry scanning of the monomer solutions containing an electrolyte. The electrogenerated polymer films exhibited reversible electrochemical processes and strong color changes upon electro‐oxidation or electro‐reduction, which can be switched by potential modulation. The remarkable electrochromic behavior of the film was clearly interpreted on the basis of spectroelectrochemical studies, and the electrochromic stability was evaluated by the electrochromic switching studies. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 644–655     

聚苯胺电致变色薄膜在不同颜色区间的电化学循环稳定性研究

本文采用电位阶跃和循环伏安法结合紫外可见光光度法研究了聚苯胺薄膜的电致变色性质. 聚苯胺薄膜颜色多变,颜色在浅黄色到绿色再到蓝色之间变化,本文研究在不同的颜色变化区间内聚苯胺薄膜的电化学循环稳定性. 研究结果表明,薄膜在黄色到蓝色(0.4 V ~ 1.2 V)以及绿色到蓝色(0.8 V ~ 1.2 V)区间变化时,电致变色循环性能较差,而在黄色和绿色(0.4 V ~ 0.8 V)之间变化时循环稳定性能良好,着色时间为4.5 s,着色效率高达159.48 cm²·C^-1.     

A Solution‐processible,n‐dopable polypyrrole derivative

In this study, soluble, n‐dopable, florescent, electrochromic polypyrrole derivative was synthesized through both chemical and electrochemical polymerization of 2‐[6‐(1H‐pyrrol‐1‐yl)hexyl]‐1H‐benzo[de]isoquinoline‐1,3(2H)‐dione (PyNI). The polymer synthesized through chemical polymerization had PL emission maxima at 471 and 543 nm and exhibited two redox couples at E_1/2,p = ?1.48 V and E_1/2,p = 1.12 V due to n‐type and p‐type doping, respectively. Electrochromic properties of electrochemically synthesized poly(PyNI) (PPyNI) were investigated via spectroelectrochemistry, kinetic studies, coloration efficiency, and colorimetry measurements. The optical band gap of PPyNI was calculated as 2.99 and 2.37 eV. Spectroelectrochemistry analysis of PPyNI reflected electronic transitions at 330–418 nm and 704 nm due to π–π* transition and charge carrier band formation, respectively. The polymer exhibited a switching time of 1.63 s and an optical contrast of 33.37%. Furthermore, dual‐type, complementary‐colored polymer electrochromic device in ITO/PPyNI/PEDOT/ITO configuration was assembled and characterized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Substituent effects to the electrochromic behaviors of electropolymerized metallophthalocyanine thin films

Metallophthalocyanines (MPcs) (M = 2H⁺, Zn²⁺, Co²⁺, and Cu²⁺) bearing diethylaminophenoxy and chloro substituents at the peripheral positions (MPc-tdea-tCl) were coated on the working electrodes with the electropolymerization and tested as electrochromic materials. Altering the metal center of MPcs affected the redox activities of MPc-tdea-tCl films. All electropolymerized MPc-tdea-tCl films behaved as conductive and redox active films in different electrolyte systems. Electrochromic properties of MPc-tdea-tCl films were investigated via the voltammetric, in situ spectroelectrochemical, and in situ spectroelectrocolorimetric measurements. H ₂ Pc-tdea-tCl film did not give any electrochromic response, while ZnPc-tdea-tCl and CuPc-tdea-tCl films behave as a reasonable electrochromic material. Distinctive color changes with short response times, high optical contrast, and better optical and coulombic stabilities were only observed with CoPc-tdea-tCl film.     

Synthesis and electrochromic properties of polybismaleimides containing triphenylamine units

The bismaleimide (BMI) monomer containing triphenylamine was prepared firstly. Then BMI was reacted with different diamines by Michael addition to obtain prepolymers, respectively. Finally, polyimides (PIs) were obtained through melting procedure. The effects of the structure of BMI moiety and thermal curing condition on thermal stability of PIs were studied by thermogravimetric analysis. PIs have excellent processing properties for film casting. Cyclic voltammetry of PI films was carried out on an indium-doped tin oxide-coated glass substrate. Results which exhibit two reversible oxidations at 0.71–0.78 and 1.06–1.16 V vs Ag/AgCl. The electrochromic performance was investigated by spectroelectrochemical methods. These anodically coloring polymer films not only showed good electrochromic properties but also exhibited high optical contrast ratio of transmittance with a color changing from yellow to green. After 100 cyclic switches, the polymer films still retained excellent redox and electrochromic activity.     

钒钨酸盐-CdS纳米粒子复合膜的制备与电致变色性能

通过层-层自组装方法制备了由Dawson结构三钒取代型钨酸盐1-K₉P₂W₁₅V₃O₆₂·18H₂O(P₂W₁₅V₃)与CdS纳米粒子构筑的复合膜材料, 研究了CdS纳米粒子添加和复合膜层数对P₂W₁₅V₃多酸复合膜材料电致变色性能的影响. 采用UV, XRD, SEM和循环伏安等测试手段对复合材料的结构和性能进行了表征; 将电化学工作站和紫外-可见吸收光谱联用, 在-1.0~+1.0 V的电压范围内, 对不同层数、 有无CdS纳米粒子复合的的膜材料的电致变色性能进行研究. 研究结果表明, 20层的复合膜材料性能最佳, 光反差为38.05%, 着色时间为3.57 s, 褪色时间为6.94 s, 最大着色效率达到94.04 cm²/C, 实现了从无色、 蓝色到蓝紫色, 再到无色的可逆颜色变化, 相对于单独P₂W₁₅V₃膜, 光反差提高46.07%, 着色效率提高96.53%, 电致变色性能显著提高.     

Electrochemical synthesis of poly(3‐methylthiophene): A kinetic study

Poly(3‐methylthiophene) (P3MT) films were electrogenerated on both platinum and carbon‐felt working electrodes. The kinetic equation was determined by the monomer and electrolyte concentrations being changed for different reaction times. For each sample, the weight of the polymer obtained was measured along with the polymerization charge, the oxidation charge, the ratio (R) between the two magnitudes, the charge storage efficiency (SE), and the doping level. The results obtained from the kinetic study indicate significant electrolyte participation in the electropolymerization process. The SE and the doping level decreased inversely proportionately to both the reaction time and the concentrations of the monomer and electrolyte. The ratio R increased with reaction time as well as with monomer or electrolyte concentrations for all P3MTs generated on the carbon‐felt electrodes, whereas for those films generated on platinum electrodes, the highest values were obtained for the lowest monomer and electrolyte concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1258–1266, 2000     

Electrochemically initiated chain polymerization of pyrrole in aqueous media

The electrochemical quartz crystal microbalance has been employed to investigate the electropolymerization of pyrrole in a variety of aqueous electrolytes. In contrast to the generally accepted cation–radical coupling process for the electropolymerization of pyrrole, an electrochemically initiated chain polymerization, featuring a high polymerization rate and involving little charge transport, was found under specific conditions in the presence of ClO^?₄, BF^?₄, and PF^?₆ electrolytes. The more typical cation-radical coupling mechanism, characterized by a constant polymerization charge to mass deposited ratio, is observed in the presence of Cl^?, NO^?₃, dodecyl sulfate, copper phthalocyanine tetrasulfonate, β-cyclodextrin tetradecasulfate, and poly(styrene sulfonate). Electrochemical characterizations of polypyrrole films prepared in aqueous ClO^?₄ electrolytes reveal that the polymer formed via chain polymerization exhibits the ability to transport both cations and anions during electrochemical switching between redox states, while the polymer synthesized through cation-radical coupling is only capable of transporting a single ionic species.     

Polypyrrole films electropolymerized from ionic liquids and in a traditional liquid electrolyte: A comparison of morphology and electro-optical properties

Polypyrrole (pPy) films have been formed by electropolymerization from a conventional media: lithium triflate in acetonitrile and in room temperature ionic liquids: 1-ethyl-3-methyl imidazolium bis(perfluoroethanesulfonyl)imide (EMIPFSI) and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (EMITF). The well ordered nodular morphology of the pPy film grown in EMIPFSI with significantly low roughness endows these films with superior redox activity and electro-optical properties. Ambient temperature dc conductivities of 43, 15 and 13 S cm⁻¹, for films grown in EMIPFSI, EMITF and control solutions have seen obtained. The well-organized particulate morphology of the pPy film grown in EMIPFSI seems to be responsible for its enhanced conductivity, as also better interfacial charge transfer capabilities as compared to their counterparts derived. Under an external bias of ±2.2 V, the sluggish switching kinetics shown by the films under scrutiny presumably are due to the (i) resistive barriers formed at the two interfaces of the pPy electrode (ii) a plausible passivation layer on the solution side of the film during electrochemical cycling. This demonstrates the need to further improve the interfacial properties of pPy so as to obtain a consistent and stable electrochromic response.     

邻苯二胺的电聚合及膜氧化还原过程的研究

石英晶体微天平;循环伏安法;邻苯二胺的电聚合及膜氧化还原过程的研究     

导电聚合物的电化学制备和电化学性质研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(I)

简要介绍本研究组自上世纪80年代以来在导电聚合物的电化学制备和电化学性质研究中取得的一些主要成果,包括吡咯电化学聚合条件的影响、电化学聚合反应机理及其反应动力学、导电聚吡咯的两种掺杂结构及其两步电化学氧化还原过程和电化学过氧化的机理、导电聚苯胺的电化学性质、导电聚合物稳定性的电化学解释等等.     

Influence of polymerization time on the properties of polypyrrole-poly[bis(phenoxyphosphazene)] composites electrogenerated at constant current density

The influence of different polymerization times on the characteristics of films of polypyrrole, PPy, and of composites of polypyrrole-poly[bis(phenoxyphosphazene)], PBPP-PPy, both with p-toluenesulfonic acid (HTSO) as supporting electrolyte and acetonitrile as solvent, has been studied. Films and composites were grown for 10-60 min under galvanostatic control at a current density of 4.2 mA cm⁻². The electrooxidation of the PPy in the films and the composites was controlled by diffusion. With increasing electropolymerization time the specific charge storage capacity of both the films and the composites decreased. PBPP increased the conductivity for all polymerization times, but had almost negligible effect on polimerization efficiency. The specific charge storage capacity and the conductivity increased with PBPP thickness. In contrast, the polymerization efficiency decreased for the thicker composite. The presence of PBPP increased PPy/TSO adhesion to the electrode surface but did not decrease its stability. The influence of the polymerization time on the morphology of films and composites was also studied.     

纳米纤维聚苯胺膜在不锈钢电极表面的生长过程

研究了脉冲电流法(PGM)聚合苯胺时, 纳米纤维聚苯胺(PANI)膜在不锈钢(SS)电极表面的生长过程. 用计时电位法和扫描电子显微镜(SEM)表征了聚苯胺生长过程的电化学特征和微观形貌; 并通过循环伏安(CV)法研究了苯胺的聚合速率. 结果表明, 聚苯胺的生长经历了两个阶段, 首先是在裸不锈钢电极表面上形成颗粒状聚苯胺, 此时聚合电位约为1.10 V, 经历了30 s后, 电极表面被一层颗粒状聚苯胺膜所覆盖; 在此基础上, 聚苯胺以纳米纤维状结构继续生长, 当颗粒状聚苯胺被纳米纤维状聚苯胺膜完全覆盖时, 聚合电位降至0.75 V左右并保持稳定.     

Conducting polymer diffraction gratings on gold surfaces created by microcontact printing and electropolymerization at submicron length scales

Conducting polymer diffraction gratings on Au substrates have been created using microcontact printing of C18-alkanethiols, followed by electropolymerization of either poly(aniline) (PANI) or poly(3,4-ethylenedioxythiophene) (PEDOT). Soft-polymer replicas of simple diffraction grating masters (1200 lines/mm) were used to define the alkanethiol template for polymer growth. Growth of PANI and PEDOT diffraction gratings was followed in real time, through in situ tapping-mode atomic force microscopy, and by monitoring diffraction efficiency (DE) as a function of grating depth. DE increased as grating depth increased, up to a limiting efficiency (13-26%, with white light illumination), defined by the combined optical properties of the grating and the Au substrate, and ultimately limited by the loss of resolution due to coalescence of the polymer films. Grating efficiency is strongly dependent upon the grating depth and the refractive index contrast between the grating material and the surrounding solutions. Both PEDOT and PANI gratings show refractive index changes as a function of applied potential, consistent with changes in refractive index brought about by the doping/dedoping of the conducting polymer. The DE of PANI gratings are strongly dependent on the pH of the superstrate solution; the maximum sensitivity (DeltaDE/DeltapH) is achieved with PANI gratings held at +0.4 V versus Ag/AgCl, where the redox chemistry is dominated by the acid-base equilibrium between the protonated (emeraldine salt) and deprotonated (emeraldine base) forms of PANI. Simulations of DE were conducted for various combinations of conducting polymer refractive index and grating depth, to compute sensitivity parameters, which are maximized when the grating depth is ca. 50% of its maximum obtainable depth.     

Synthesis and electrochromism of novel organosoluble polyarylates bearing triphenylamine moieties

A series of novel aromatic polyarylates with triphenylamine units in the main chain and as the pendent group were prepared from the dicarboxylic acid monomer, N,N‐bis(4‐carboxyphenyl)‐N′, N′‐diphenyl‐1,4‐phenylenediamine (1), and various bisphenols. These polyarylates were amorphous and readily soluble in common organic solvents. They had excellent levels of thermal stability associated with moderately high T_g values (182–263 °C). These polymers exhibited strong UV–vis absorption bands at 357–360 nm in toluene solution and the photoluminescence spectra showed maximum bands around 493–503 nm in the green region. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the polyarylates exhibited two reversible oxidation redox couples in acetonitrile solution at E_onset 0.77–0.79 V and 1.12–1.14 V, respectively. The typical polymer 3b film revealed good stability of electrochromic characteristics, with color change from colorless to green and blue at applied potentials ranging from 0.00 to 1.24 V. These anodically polymeric electrochromic materials not only showed excellent reversible electrochromic stability with good green coloration efficiency (CE = 159 cm²/C) and blue coloration efficiency (CE = 154 cm²/C) but also exhibited high contrast of optical transmittance change (ΔT%), 54% in 895 nm for green color and up to 84% in 595 nm for blue color. After over 100 cyclic switches, the polymer films still exhibited excellent stability of electrochromic characteristics. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2004–2014, 2007     

单体摩尔比对共聚物电化学及电致变色性质的影响

通过电化学聚合法制备了3, 6-(二噻吩基)-9-(二茂铁甲酸己酯基)-咔唑(BTC-H-Fc)与3, 4-乙烯二氧噻吩(EDOT)不同摩尔比下的共聚物,并运用电化学、傅里叶变换红外(FT-IR)光谱及光谱电化学对其结构与性能进行了表征。研究结果表明所得共聚物均能显示良好的电化学特性,光谱电化学测试结果表明,当摩尔浓度比为1时, P(BTC-H-Fc:EDOT)-1中性态下表现浅绿色,且随着施加电压增加转变为绿色和紫色; P(BTC-H-Fc:EDOT)-4则显示了最丰富的颜色,可在中性态的红褐色、棕黄色、绿色、蓝色和紫色五种颜色之间可逆变换;当摩尔比继续增加时, P(BTC-H-Fc:EDOT)-8可以显示红褐色、灰黑色、蓝绿色和天空蓝四种颜色。另外,三种摩尔比的聚合物薄膜还具有不错的光学对比度,转换响应时间及着色效率,该性能为其在电致变色器件的应用提供了潜力。     

Synthesis,photoluminescence, and electrochromism of polyamides containing (3,6‐di‐tert‐butylcarbazol‐9‐yl)triphenylamine units

A new carbazole‐derived, triphenylamine (TPA)‐containing aromatic dicarboxylic acid monomer, 4,4′‐dicarboxy‐4″‐(3,6‐di‐tert‐butylcarbazol‐9‐yl)TPA, was synthesized, and it led to a series of electroactive aromatic polyamides with main‐chain TPA and pendent 3,6‐bis(tert‐butyl)carbazole units by reacting it with various aromatic diamines via the phosphorylation polyamidation technique. The polyamides were amorphous with good solubility in many organic solvents and could be solution‐cast into flexible and strong films. They showed high glass‐transition temperatures (282–335 °C) and high thermal stability (10% weight loss temperatures >480 °C). The electroactive polymer films had well‐defined and reversible redox couples with good cycle stability in acetonitrile solutions. The polymer films also exhibited fluorescent and multielectrochromic behaviors. The anodically electrochromic polyamide films had moderate coloration efficiency (～100 cm²/C) and high optical contrast ratio of transmittance change (Δ%T) up to 47% at 813 nm and 48% at 414 nm for the green coloring. After hundreds of cyclic switches, the polymer films still retained good redox and electrochromic activity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

水介质中吡咯的电化学聚合反应

研究了扫描电位上限对循环伏安法制备聚吡咯膜性能的影响，吡咯在水溶液中于玻碳电极表面化学聚合的起始电位为0．58V，在聚吡咯（Ppy）修饰电极表面聚合的起始电位为0．55V，当聚合电位上限在0．80V以上时，Ppy的氧化还原反应可逆性变差，同时，氧化电位过高将导致Ppy膜导电性能下降；研究了聚合介质对循环伏安法制备导电聚吡咯膜的影响，实时观察了吡咯（Py）聚合过程溶液中质子含量的动态变化，发现Py聚合伴随有质掺杂←→释放过程；结合Ppy膜的元素分析、ESR分析和IR光谱分析，总结出了水介质中电化学聚合高导电性聚吡咯膜的条件。     

Biosensors based on electropolymerized films: new trends

Electropolymerized films have received considerable attention in the development of biosensors and biochips, and are advancing rapidly. This paper reviews recent advances and scientific progress in electrochemical immobilization procedures for biological macromolecules on electrodes via electrogenerated polymer films. Biomolecule immobilization is classified as covalent linkage, attachment by affinity interactions, and physical entrapment. The last approach entails the use of conducting and non-conducting films, composite polymer films, and templates for the electropolymerization process. Some advances in the electrochemical transduction of biological events (enzymatic reaction, immunoreaction, or oligonucleotide hybridization) involving the redox properties or the conductivity of electropolymerized films are also presented.