纳米接触过程中黏着规律的变化

本文应用大规模分子动力学方法, 模拟了两种具有不同粗糙形貌的、刚性球形探头与弹性平面基体之间的纳米尺度接触, 计算了探头与基体之间的拉离力和黏着功, 研究了接触过程中界面黏着力随载荷的变化规律, 分析了接触界面原子的法向应力分布. 研究发现, 原子级光滑接触的黏着力随着载荷的增大而线性增大, 而原子级粗糙接触的黏着力-载荷曲线分为以不同斜率增长的两个阶段. 相比于原子级光滑探头, 原子级粗糙探头与基体之间具有较小的拉离力和黏着功, 却在接触过程中形成了较大的黏着力. 因此, 拉离力和黏着功不能表征出纳米接触过程中原子吸引作用对界面法向力的贡献大小.     

Experimental investigation of an air-magnetic-liquid resonator

Experimental results obtained by studying a vibratory system in which a magnetic liquid playing the role of a mass shuts off the cross section of a tube under the effect of a magnetic field and is spring-loaded by an air cavity and elasticity of ponderomotive type are discussed. An expression for the resonant frequency of vibrations is derived with allowance for both types of elasticity. The expression agrees well with the experimental data.     

Limiting shape due to fretting wear in an adhesive contact in Dugdale approximation

We consider fretting wear in an adhesive contact due to tangential oscillations of small amplitude. While both wear in non-adhesive contacts and adhesive contacts without wear have been studied in detail, there still have been no attempts to combine both approaches. In the present paper, we study the problem of wear in adhesive contacts under the simplified assumption, that the adhesive (attractive) stress is constant up to some critical distance h and vanishes beyond this range (Dugdale approximation). In this approximation, the normal adhesive contact problem can be solved to a great extent analytically. In a series of previous works, it was shown that the worn shape due to fretting wear tends to some limiting shape which is determined solely by the solution of the normal contact problem. In the present paper, we exploit these ideas to derive the limiting shape of the worn body in an adhesive contact.     

Pseudoelastic deformation during nanoscale adhesive contact formation

Molecular dynamics simulations are employed to demonstrate that adhesive contact formation through classical jump to contact is mediated by extensive dislocation activity in metallic nanoparticles. The dislocations generated during jump to contact are completely annihilated by the completion of the adhesive contact, leaving the nanoparticles dislocation-free. This rapid and efficient jump to contact process is pseudoelastic, rather than purely elastic or plastic.     

Experimental and numerical investigation of friction-induced vibration of a beam-on-beam in contact with friction

The vibrations generated by friction are responsible for various noises such as squealing, squeaking and chatter. Although these phenomena have been studied for a long time, it is not well-understood. In this study, an experimental and numerical study of friction-induced vibrations of a system composed of two beams in contact is proposed. The experimental system exhibits periodic steady state vibrations of different types. To model and understand this experimental vibratory phenomenon, complex eigenvalue and dynamic transient analyses are performed. In the linear complex eigenvalue analysis, flutter instability occurs via the coalescence of two eigenmodes of the system. This linear study provides an accurate value of the experimental frequency of vibration. To understand what happens physically during friction-induced instability, a dynamic transient analysis that takes account of the non-linear aspect of a frictional contact is performed. In this analysis, friction-induced instability is characterized by self-sustained vibrations and by stick, slip and separation zones occurring at the surface of the contact. The results stemming from this analysis show that good correlation between numerical and experimental vibrations can be obtained (in time and frequency domains). Moreover, time domain simulations permit understanding the physical phenomena involved in two different vibratory behaviours observed experimentally.     

S波段相对论速调管振荡器的实验研究

 在20 GW加速器平台上开展了S波段相对论速调管振荡器（RKO）的单次和重复频率束流调制和微波辐射的实验研究。采用无箔空心阴极和0.9 T的恒流源磁场引出束压1 MV、束流13 kA、脉宽40 ns的环形电子束驱动RKO,该电子束经过3个紧密耦合的扩展互作用腔再经过一段漂移管的群聚后,产生了7.8 kA/20 ns的基波调制束流,该调制束流激励三轴输出腔,单次运行输出了3.5 GW的微波辐射,束波转换效率29%,脉宽20 ns;脉冲重复频率20 Hz运行时,输出微波功率3.4 GW,束波转换效率26%。该振荡器具有起振时间快、输出频谱较纯和结构紧凑等优点。     

S波段长脉冲相对论返波振荡器实验研究

从物理机制上定性地分析了导致脉冲缩短的主要原因,给出了长脉冲重复频率运行下的相对论返波振荡器(RBWO)设计原则。结合传统谐振式返波振荡器的基本设计理论,设计和模拟优化了工作在S波段的长脉冲RBWO,并利用本实验室现有长脉冲脉冲功率驱动源开展了S波段长脉冲RBWO的实验研究。实验结果表明：在单次运行条件下,微波输出功率达到约2 GW、脉宽约90 ns;在10 Hz重复频率运行条件下,输出微波功率达到约1 GW、脉宽约100 ns。器件产生的微波频率为3.6 GHz,输出模式为TM01模,效率约20%。对实验结果分析表明,器件截止颈和第一个慢波结构结合处的爆炸发射是导致脉冲缩短的主要原因之一。     

High strain rate response of an elastomer

Abstract

Plate impact experiments have been performed to examine the high strain rate response of an elastomer (explosive binder) shocked to 8 kbar stress. Particle velocity data have been obtained using in-material electromagnetic velocity gauges. Normal impact experiments have provided compression and release wave velocities and stress-strain results; ramp wave experiments indicate that the elastomer response is independent of loading rate; inclined plate impact measurements show that the material does not support any shear even at these strain rates. Additionally, numerical simulations have been performed to show that shock propagation in viscous fluids canbe simulated without artificial viscosity but by using the material viscosity in the constitutive relations. Such simulations will be useful in obtaining material viscosities from the measured wave profiles.     

An experimental investigation of electromechanical response in a dielectric acrylic elastomer

Electric-field-induced transverse-strain response was investigated in a dielectric acrylic elastomer at 1 Hz. The strain was observed to be proportional to square of the electric field strength within the measurement range (0 to 2 MV/m). Elastic compliance of the elastomer was measured as a function of frequency and was found to exhibit strong frequency dependence between 1 and 10 Hz. It was indicated that the field-induced-strain response in the acrylic elastomer originates primarily from the Maxwell stress effect. The experimental data obtained at low field and frequency were used to estimate the electromechanical behavior at higher field and frequency. PACS 77.65.-j; 77.84.Jd; 81.05.Lg     

Experimental investigation of time-dependent cavitation in an oscillatory squeeze film

The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while the other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.     

Experimental investigation of time-dependent cavitation in an oscillatory squeeze film

The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while the other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.     

Experimental investigation of the evolution of gaussian quantum discord in an open system

Gaussian quantum discord is a measure of quantum correlations in Gaussian systems. Using Gaussian discord, we quantify the quantum correlations of a bipartite entangled state and a separable two-mode mixture of coherent states. We experimentally analyze the effect of noise addition and dissipation on Gaussian discord and show that the former noise degrades the discord, while the latter noise for some states leads to an increase of the discord. In particular, we experimentally demonstrate the near death of discord by noisy evolution and its revival through dissipation.     

Experimental investigation of the resolution and sensitivity of an ultrasonic imaging camera with an immersion lens

An experimental evaluation of the space resolution of a prototype ultrasonic imaging camera with an immersion acoustic lens is performed. It is shown that the measured parameters agree well with the theoretical calculations. The measurements of the level of internal noise and the absolute sensitivity of the imaging camera are performed; the sensitivity is found to be 0.008 Pa/Hz^1/2.     

Experimental investigation of the plasma-wall transition

We report on measurements of the ion velocity distribution as a function of distance to a target immersed in a magnetized argon plasma. Two situations are investigated: (a) practically the whole plasma streams onto a large target, and (b) the size of the target is significantly smaller than the plasma diameter. The Mach number M=u/c_{s} decreases from M=1 at the target surface to values around 0.5 at a typical scale of lambda_{a}=30 mm and lambda_{b}=5 mm, respectively. In order to explain these small decay lengths, the measurements of case (a) are compared with a source-diffusion model and those of (b) to Hutchinson's model. In (a) good agreement between modeling and experiment is obtained assuming a low neutral gas temperature. The data in (b) also agree excellently with modeled profiles, although the large fitting parameter D=20 m;{2}/s indicates that other processes than diffusion contribute significantly to the transport.     

微穿孔介电弹性体薄膜的吸声性能试验分析*

针对普通薄膜型降噪结构的吸声性能较差和吸声带宽较窄的问题,本文设计了一种微穿孔的介电弹性体薄膜吸声结构。该结构由穿孔的介电弹性体薄膜与背腔组合而成,目的是拓宽介电弹性体薄膜低频率段的吸声带宽。针对微穿孔的介电弹性体薄膜吸声结构,从试验角度分析穿孔薄膜初始厚度、穿孔孔径及穿孔间距对结构吸声性能的影响。分析结果可知：通过适当增加薄膜的初始厚度,薄膜的整体吸声性能得到有效提升,最大可将319Hz吸声频带的吸声系数从0.2提升至0.7;减小薄膜的穿孔孔径能够有效拓宽穿孔薄膜的吸声频带,可使吸声系数0.4以上的吸声带宽由304Hz拓宽至432Hz;适当控制穿孔间距能够达到更好的吸声效果。     

Experimental investigation of the travel-time variance of an acoustic wave propagating through the grid-generated turbulence

An experimental technique for the investigation of the behaviour of acoustic wave propagation through a turbulent medium is discussed. The present study utilizes the ultrasonic travel-time technique to diagnose a grid-generated turbulence. Travel-time variance is studied versus mean flow velocity, travel distance and outer turbulence scale. The effect of thermal fluctuations, which result in fluctuations of sound speed, is studied using a heated-grid experiment. Experimental data obtained using ultrasonic technique confirm numerical and theoretical predictions of nonlinear increase of the travel-time variance with propagation distance, which could be connected to the occurrence of caustics. The effect of turbulent intensity on the travel-time variance and appearance of caustics is studied. It is demonstrated experimentally that the higher turbulence intensity leads to the shorter distance, at which the first caustic occurs. The probability density for caustics appearance is analysed against the measured wave amplitude fluctuations. The analysis reveals that the region of high-amplitude fluctuations corresponds to the region where the probability of formation of random caustics differs from zero. Experimental results are in very good agreement with theoretical and numerical predictions.     

Experimental investigation of the limits of ethanol combustion in the boundary layer behind an obstacle

Experimental data on the flow structure and mass transfer near the boundaries of the region existence of the laminar and turbulent boundary layers with combustion are considered. These data include the results of in-vestigation on reacting flow stability at mixed convection, mass transfer during ethanol evaporation “on the floor” and “on the ceiling”, when the flame surface curves to form the large-scale cellular structures. It is shown with the help of the PIV equipment that when Rayleigh–Taylor instability manifests, the mushroom-like structures are formed, where the motion from the flame front to the wall and back alternates. The cellular flame exists in a narrow range of velocities from 0.55 to 0.65 m/s, and mass transfer is three times higher than its level in the standard laminar boundary layer.     

Experimental investigation of nonlocality effects in the electron energy spectrum in an electronegative gas

The nonlocality of the electron energy distribution function (EEDF) in a dc discharge in oxygen is observed experimentally. A method is developed for measuring the isotropic part of the EEDF in a low-temperature plasma of electronegative gases. The radial dependence of the EEDF and the radial distributions of the electron density, the average electron energy, and the potential are determined. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 7, 511–516 (10 April 1996)