Molecular orientation in channel flows of main-chain thermotropic liquid crystalline polymers

 In situ wide angle X-ray scattering is employed for quantitative measurements of flow-induced molecular orientation in channel flows of thermotropic hydroxypropyl-cellulose (HPC). An extrusion die, constructed to allow X-ray access, generates slit flow, slit flow with superimposed contractions and expansions in cross-section, and slit flow past an obstruction. In slit flow, weak molecular orientation develops slowly with downstream position. Superimposed extension associated with contraction flows leads to a strong enhancement in orientation, which persists with distance further downstream of the contraction. Conversely, transverse extension present in expansion flows generates a bimodal orientation state and substantial reductions in average molecular orientation. These results are compared to earlier measurements on a commercial fully aromatic thermotrope. HPC is found to respond more strongly to superimposed extension, and more weakly to the prevailing inhomogeneous shear flow than the commercial material. Received: 22 October 1999/Accepted: 13 January 2000     

Molecular orientation in sheared molten thermotropic random copolyester

The macromolecular alignment and texture orientation in sheared thermotropic copolyester were investigated using in situ wide-angle X-ray scattering (WAXS) and polarizing optical microscopy (POM). The molecular behavior was correlated with viscoelastic properties. The polymer is a random copolyester based on 60 mol% 1,4-hydroxybenzoic acid (B) and 40 mol% ethylene terephthalate (ET) units. X-ray scattering showed that the molecular chains were aligned along the flow direction. The degree of molecular orientation, , is an increasing function of the applied shear rate. However, rheo-optics showed that shear flow could not orient the polydomain texture, i.e., neither defect stretching nor elimination of defects was observed. Instead, shear compressed the microdomains and gave rise to long-range orientation correlations. Rheology showed that the nematic melt is viscoelastic, the loss modulus G″ dominates the elastic modulus G′, and the dynamic viscosity η* is shear thinning. Moreover, the steady shear viscosity, η, also behaved shear thinning, while the first normal stress difference N ₁ remained positive. The empirical Cox–Merz rule did not hold, , within the shear rate range studied. The microscopic and rheological properties suggest that B–ET is a flow-aligning nematic polymer.     

Dynamic rheology of the immiscible blends of liquid crystalline polymers and flexible chain polymers

Immiscible blends containing liquid crystalline polymers (LCP) as dispersed phases show different dynamic rheological properties than those composed of flexible polymers. The widely used Palierne’s model was shown by many authors to be insufficient to describe the frequency dependence of dynamic modulus of such blends. A new model was presented to describe the dynamic rheology of the immiscible blend containing LCP as a dispersed phase. The flexible chain polymer matrix was assumed to be a linear viscoelastic material under small amplitude oscillatory shear flow, and the LCP was assumed to be an Ericksen’s transversely isotropic fluid. The Rapini-Papoular equation of anisotropic interfacial energy was used to account for the effect of nematic orientation on the interfacial tension. It was found that the orientation of the director and the anchoring energy greatly influenced the storage modulus at the “shoulder” regime. The overall dynamic modulus of the blend can be well described by the model with suitable choice of the orientation of the director and anchoring energy of LCP.     

Microstructure and viscoelasticity in thermotropic copolyesters: the influence of monomer concentration

This research investigates the influence of monomer composition on the thermal transitions, mi crostructure, and viscoelastic properties of thermotro pic liquid crystalline polymers (LCPs) based on 1, 4-hydroxy-benzoic acid (B) and 2,6-hydroxy-naphthoic acid (N). Compositions B–N of 1:1, 1:3, 3:1, and 2:1 mol% were studied. The solid-to-nematic transition T _s→n was greatly influenced by the monomer composition, ranging from 230 to 280 °C. However, the decomposition temperature T _dec was independent of composition, all the materials degrading at T _dec = 509 °C. Polarized optical microscopy showed a threaded texture in the nematic phase. Fiber X-ray diffraction showed aperiodic meridional maxima for all LCPs, the number of maxima depended on composition. B–N 3:1 and 1:3 mol% favor the orthorhombic crystallographic phase whereas the 1:1 and 2:1 mol% crystallized in a pseudohexagonal phase. Dynamic time sweeps showed that the nematic phases are stable at the temperatures studied. Strain sweeps showed the existence of a linear viscoelastic (LVE) regime. The LVE properties ranged from predominantly viscous (G^′ < G^″) for the 1:1 mol% composition to predominantly elastic (G^′ > G^″) and with a well-defined rubber-like regime for the 1:3 mol% composition, resembling the rheology of flexible polymer melts. The persistence length q appears to be the parameter driving the rheological behavior.

An evaluation of the Larson-Doi model for liquid crystalline polymers using recoil

The mesoscopic models for the rheological properties of liquid crystalline polymers proposed by Larson and Doi in 1991 and Kawaguchi and Denn in 1999 are based on phenomenological expressions that describe the evolution of the defect density and the contribution of the “texture” to the stress. In the present work, we attempt to assess some of these assumptions by monitoring how the energy stored in the texture of liquid crystalline materials evolves during shear flows. For that purpose, strain recovery is measured as a function of the applied strain for flow reversal and intermittent flow. Solutions of poly-benzylglutamate in m-cresol, hydroxypropylcellulose in water and a nematic surfactant solution are used as model systems. Although the behaviour is described qualitatively by the model, discrepancies between the predictions and the experiments are observed, especially when the shear history includes rest periods. Received: 14 July 1999 /Accepted: 30 August 1999     

Brownian dynamics simulations for suspension of ellipsoids in liquid crystalline phase under simple shear flows

Brownian dynamics simulations of shear flows are carried out for various suspensions of ellipsoids interacting via the Gay-Berne potential. In this simulation all the systems of the suspension are in a liquid crystalline phase at rest. In a shear flow they exhibit various motions of the director depending on the shear rate: the continuous rotation, the intermittent rotation, the wagging-like oscillation, and the aligning. The director is almost always out of the vorticity plane when it rotates, that is the kayaking. The number density of the system and the inter-particle potential intensity significantly affect the shear rate dependence of orientation. In particular, the continuous rotation of director is maintained to higher shear rates for the system with a stronger potential. Furthermore, the rheological properties are examined. The shear-thinning in viscosity is observed, but the negative first normal difference is not obtained.     

Investigation of the band texture occurring in acetoxypropylcellulose thermotropic liquid crystalline polymer using rheo-optical, rheological and light scattering techniques

The optical evolution of the band texture occurring in acetoxypropylcellulose thermotropic polymer has been investigated as a function of temperature and primary shear rate. Two distinct kinds of band texture were observed which are referred to here as the `fast' and `slow' band textures with regard to their rate of evolution. The fast band texture appears very quickly following the cessation of shear and then disappears. The slow band texture is much finer than the fast band texture and appears to exist both during and after the appearance of the fast band texture. The evolution behaviour of the fast band texture is interpreted in terms of the shifting of a three-region evolution curve. Particular attention has been paid to investigating the influence of temperature on the formation of the fast band texture. Rheo-optical experiments show that the minimum shear rate required to form the fast band texture increases as a power-law function of the temperature. By subsequently performing steady flow measurements over a range of temperatures, the minimum shear stress required to form the fast band texture has been found to be independent of temperature and to increase linearly with the molecular weight of the sample. Results obtained from dynamic tests are compared with similar tests conducted previously on a lyotropic hydroxypropylcellulose water solution (Harrison and Navard 1999). The results of the comparison provide evidence in support of a connection between the behaviour of the dynamic functions and the optical evolution of the slow band texture. These results suggest that nematic and cholesteric fluids can relax through several different possible mechanisms, each of which results in a periodic band texture following the cessation of shear. Received: 2 March 1999/Accepted: 26 July 1999     

Uniaxial extensional flow behavior of immiscible and compatibilized polypropylene/liquid crystalline polymer blends

In this work liquid crystalline polymer (LCP) and thermoplastic (TP) blends with and without compatibilizer were studied with respect to their elongational flow behavior, under uniaxial extensional flow. This knowledge is important because in processes involving dominantly extensional deformations, like the case of the formation of the LCP fibrillation, transient extensional flow properties become more important than transient or steady-shear properties. In systems characterized by disperse phase morphologies (10 and 20 wt%) the LCP acts as a plasticizer, decreasing the viscosity of the system and increasing its durability with respect to that of the matrix. On the other hand, for a system in which a co-continuous morphology is present (40 wt% LCP) fibrils and droplets deformation occurs simultaneously, leading to a much higher strain hardening and durability. Moreover, the addition of compatibilizers to the blends gives rise to an increase of the strain hardening and to a decrease of the durability, which is in accordance with the mechanical properties, namely a higher Young’s modulus and lower elongation at break, in comparison with noncompatibilized systems.     

Director dynamics of uniformly aligned nematic liquid crystals in transient shear flow

We have developed a modular rheo-optical apparatus to study the flow properties of liquid crystals. Its main components are shearing device, strong magnetic field, and optical microscope. We performed experiments on well defined initial morphologies with uniform molecular alignment. The monodomains were achieved with strong magnetic fields (4.7T). Time-resolved conoscopy is the primary optical technique in our investigation. We propose a simple relation between the distribution of alignment angles over the sample thickness and the conoscopically measured angle, to quantitatively measure the alignment angle in shear flow.We followed the relaxation of a shear-induced splay deformation in small molecule model systems (N-(p-methoxybenzylidene) p-butylaniline (MBBA), pentyl-cyano-biphenyl (5 CB) and a commercially available mixture OM14244). We define a rotational director diffusivity (K _s splay elastic constant.i7s splay viscosity) from the relaxation process and devised a model, based on the diffusion equation to determine their values.The director alignment behavior of the small molecule liquid crystals (SMLC's) in shear flow is well described by the two-dimensional Leslie-Ericksen model. The effect of director elasticity can clearly be seen in our experiments, resulting in a decrease of the steady state alignment angle at smaller Ericksen numbers.We found that there is no strain rate dependence of the director vorticity from 0.002/s to 2/s for poly-(-benzyl-D/L-glutamate) (PBG). We determined ₂/₃ = –44 for a 2007o solution of 280000 molecular weight PBG in m-cresol at 20°C. The conoscopic interference pattern vanished after 8 strain units from an initially planar alignment and shearing could be reversed up to 10 strain units to completely recover the initial monodomain.Presented at 4th Meeting of European Rheologists, Sept. 4–9, 1994, Seville, SpainDedicated to Prof. H. Janeschitz-Kriegl at the occasion of his 70th birthday.     

Impact of texture on stress growth in thermotropic liquid crystalline polymers subjected to step-shear

The Landau-de Gennes tensor order parameter equations of nemato-dynamics are formulated, solved and used to find the impact of textural transformation on stress growth in thermotropic liquid crystalline polymers subjected to shear start-up flow. The simulated textural transformations include nucleation and annihilation of twist inversion walls. Coarsening processes include wall-wall annihilation, wall pinching and wall-bounding surface reactions. In the absence of defect-related effects, the stress growth is characterized by an early stress plateau, intermediate power law growth, and a late stage stress plateau. As the Deborah number (De) increases, flow-induced textural transformations affect the late stage and then the intermediate stress growth stage. Defects are found to be stress sinks, and so removal of defects increases stress. At lower Deborah numbers, few defects arise and coarsening rates are low, so the main texture effect in this regime is in the late stage plateau region, causing localized step increases. At Deborah numbers close to one, nucleation and coarsening rates increase, and textural effects appear closer and closer to the intermediate stress growth regime. As De increases further, coarsening by pinching processes overcomes nucleation, and all defects disappear in the intermediate stress growth regime, causing the stress growth to exhibit a smooth staircase shape. Strain and amplitude scaling is not observed. Simulated textural transformations show that smooth staircase stress growth is the result of defect annihilation processes. The non-monotonic stress growth is consistent with experimental observations. Simulated textures provide specific knowledge important to the eventual understanding of the rheologies of textured liquid crystal polymers.     

Brownian dynamics simulation of rodlike polymers under shear flow

The highly nonlinear behaviors of rodlike polymers in nematic phase under shear flow are studied with Brownian dynamics simulation. The LebwohlLasher nematogen model is taken as the prototype of the simulation and the mean-field approximation is avoided. By considering the nearest-neighbor intermolecular interaction, the spatial orientational correlation is introduced and therefore the spatial inhomogeneity such as the multiple-domain effect can automatically be incorporated. The transient order parameters, birefringence axes, shear stresses and first normal stress differences are calculated. The important finding of this work is that the director wagging and damped oscillation share the same molecular origin as director tumbling. The only difference is that the system is split into micro-domains which tumble with different phase angles in the wagging and damped oscillation regimes. The tumbling of the director of the whole system is suppressed due to the spatial inhomogeneity of director fields and then the damped oscillation of macroscopic stresses becomes predominant. The negative first normal stress difference exists at moderate shear rates, where both elasticity and viscosity play important role. Our simulation results including some dimensionless scaling parameters find good agreement with experimental observations in literature.     

Quantitative NMR velocity imaging of a main-chain liquid crystalline polymer flowing through an abrupt contraction

 The flow of isotropic and liquid crystalline (LC) hydroxypropylcellulose (HPC) aqueous solutions into an abrupt axisymmetric contraction has been quantitatively measured by pulsed-field-gradient NMR techniques. Steady-state axial velocity profiles, acquired upstream of the contraction, reveal a large contraction entry length for the LC solution. This entry flow field exists over an order of magnitude change in flow rate and is attributed to elasticity that is associated with polydomain liquid crystallinity. Pronounced, off-centerline velocity maxima (in an axisymmetric flow field) were present upstream of the contraction, in the entry flow region. Apparently, a more viscous and elastic core of fluid was present along the centerline; this fluid resisted elongational strain more than the fluid closer to the walls. Quantitative velocity profiles were extracted from displacement distributions and corrected for elongational dispersion. The isotropic solution velocity profiles matched those obtained from viscoelastic simulations using an approximate Doi-Edwards model, parameterized with independent rheological data. Received: 29 April 1999/Accepted: 30 August 1999     

Evaluation of rheological constitutive equations for branched polymers in step shear strain flows

The pom-pom rheological constitutive equation for branched polymers proposed by McLeish and Larson is evaluated in step shear strain flows. Semianalytic expressions for the shear-stress relaxation modulus are derived for both the integral and approximate differential versions of the pom-pom model. Predictions from the thermodynamically motivated differential pompon model of ?ttinger are also examined. Single-mode integral and differential pom-pom models are found to give qualitatively different predictions, the former displays time–strain factorability after the backbone stretch is relaxed, while the latter does not. We also find that the differential pompon model gives quantitatively similar predictions to the integral pom-pom model in step strain flows. Predictions from multimode integral and differential pom-pom models are compared with experimental data on a widely characterized, low-density polyethylene known as 1810H. The experiments strongly support time–strain factorability, while the multimode pom-pom model predictions show deviations from this behavior over the entire range of time that is experimentally accessible.     

Influence of the flow history on stress growth and structure changes in the thermotropic liquid crystalline polymer Vectra B950

The structure changes in the start-up flow of the thermotropic liquid crystalline polymer Vectra 8950 are probed by performing transient experiments after various flow histories. The shear and normal stress growth curves of a squeezed sample and of a randomly oriented sample show a pronounced overshoot at low strains, whereas the stress growth curve of a sample pre-sheared until steady state shows a gradual increase. This first peak is associated with the re-orientation of the director into the shearing plane. All stress transients show a second broad maximum at large strains that results from the generation of a steady defect network. The effect of varying the relaxation period after pre-shearing is reflected in the appearance of two peaks in the subsequent stress growth curves. One of these peaks shifts linearly with re laxation period and the other is more or less fixed in position. The orientation of the molecules during steady shear flow is on average in the flow direction. Intermediate orientation levels may exist in the transient depending on the amount of strain. The material is able to maintain the flow-induced orientation distribution for a long time after cessation of flow. This is reflected in a similar fashion in the initial magnitudes of the stresses and the dynamic moduli after various preshear strains. Moreover, the dynamic moduli decrease with time after cessation of steady shear flow, indicating that the orientation increases during relaxation.     

Effect of melt viscosity of polypropylene on fibrillation of thermotropic liquid crystalline polymer in in situ composite film

 Various grades of polypropylene were melt blended with a thermotropic liquid crystalline polymer, a block copolymer of p-hydroxy benzoic acid and ethylene terephthalate (60/40 mole ratio). The blends were extruded as cast films at different values of draw ratio (slit width/film thickness). Fibrillation of TLCP dispersed phase with high fiber aspect ratio (length/width) was obtained with the matrix of low melt flow rate, i.e., high viscosity and with increasing film drawing. Melt viscosities of pure components and blends measured using capillary rheometer were found to decrease with increasing shear rate and temperature. Viscosity ratios (dispersed phase to matrix phase) of the systems being investigated at 255 °C at the shear rate ranged from 10² to 10⁴ s⁻¹, were found to lie between 0.04 and 0.15. The addition of a few percent of elastomeric compatibilizers; a tri-block copolymer SEBS, EPDM rubber and maleated-EPDM, was found to affect the melt viscosity of the blend and hence the morphology. Among these three compatibilizers, SEBS was found to provide the best fibrillation. Received: 10 January 2000/Accepted: 24 January 2000     

Polydomain model predictions of liquid crystalline polymer orientation in mixed shear/extensional channel flows

 The Larson-Doi (LD) polydomain model is used to simulate orientation development along the centerline of slit-expansion and slit-contraction flows of liquid crystalline polymers (LCPs). Orientation is computed using the LD structural evolution equations, subject to an imposed velocity field that accounts for the spatial variation of both shear and extension rates characteristic of this class of flows. Computed axial distributions of orientation averaged through the sample thickness are qualitatively similar to birefringence and X-ray scattering measurements of molecular orientation in similar flows of lyotropic and thermotropic LCPs. In slit-expansion flows, the simulations predict a 90^∘ flip in orientation direction near the midplane due to transverse stretching in the expansion region. Far away from the midplane where shear gradients dominate, orientation remains primarily along the flow direction. Within the LD model, tumbling and flow aligning materials respond in a qualitatively similar manner to mixed shear and extension, although tumbling materials are systematically more susceptible to the effects of extension. Received: 22 October 1999/Accepted: 13 January 2000     

Wavy texture in pressure-driven startup flows of liquid crystalline polymer solutions through a slit cell: effects of polymer concentration and solution temperature

Dependences of wavy texture on polymer concentration and solution temperature were examined using aqueous solutions of hydroxypropylcellulose (HPC). The phase of aqueous solution of HPC varied from an isotropic (I) system to a liquid crystalline (LC) one through a biphasic (I+LC, LC+I) system with increasing the HPC concentration and/or decreasing the solution temperature. The wavy texture emerged not only in the LC system but also in the LC+I system. Furthermore, induction time of wavy texture was evaluated in terms of apparent shear strain. It is suggested that polydomain structures included in liquid crystalline systems and droplets of isotropic phase in biphasic systems affect the initial stage of emergence of wavy texture at low shear rates.