Excess enthalpies of binary mixtures of some propylamines + some propanols at 298.15 K

The molar excess enthalpies of 1,2- and 1,3-propanediamine + 1- or 2-propanol and 1,2- and 1,3-propanediol + 1- or 2-propaneamine have been determined at 298.15 K using a twin-microcalorimeter for a series of runs over the whole range of mole fractions. All excess enthalpies were large exothermic, in particular, the systems of amines + propanediols were more than −5 kJ mol⁻¹ at the minimum. Primary or secondary alcohols and amines showed systematically different enthalpic behaviors. Equilibrium constant K1 expressed in terms of mole fractions and standard enthalpy of the formation of a 1:1 complex have been evaluated by ideal mixtures of momomeric molecules and their associated complexes.     

Excess Chemical Potentials and Partial Molar Enthalpies in Aqueous 1,2- and 1,3-Propanediols at 25°C

Excess chemical potentials and excess partial molar enthalpies of 1,2- and 1,3-propanediols (abbreviated as 12P and 13P), ^E _i, and H ^E _i (i = 12P or 13P) were determined in the respective binary aqueous solutions at 25^°C. For both systems, the values of ^E _i are almost zero, within ±0.4 kJ-mol^–1. However, the excess partial molar enthalpies, H ^E _i show a sharp mole fraction dependence in the water-rich region. Thus, the systems are highly nonideal, in spite of almost zero ^E _i. Namely, the enthalpy-entropy compensation is almost complete. From the slopes of the H ^E _i against the respective mole fraction x _i we obtain the enthalpic interaction functions between solutes, H _i–i ^E, (i = 12P or 13P). Using these quantities and comparing them with the equivalent quantities for binary aqueous solutions of 1-propanol (1P), 2-propanol (2P), glycerol (Gly), and dimethyl sulfoxide (DMSO), we conclude that there are three composition regions in each of which mixing schemes are qualitatively different. Mixing Schemes II and III, operative in the intermediate and the solute-rich regions, seem similar in all the binary aqueous solutions mentioned above. Mixing Scheme I in the water-rich region is different from solute to solute. 12P shows a behavior similar to that of DMSO, which is somewhat different from typical hydrophobic solute, 1P or 2P. 13P, on the other hand, is less hydrophobic than 12P, and shows a behavior closer to glycerol, which shows hydrophilic behavior.     

Addition of 1,2- and 1,3-Dithiols to 2-alkoxypropenals - a New Method for the Production of Substituted Dithiacycloalkanes

The reaction of 2-alkoxypropenals with ethane-1,2-dithiols and propane-1,3-dithiols under various conditions was studied by ¹H NMR and chromato-mass spectrometry. Under kinetically controlled conditions at 20° in the absence of catalysts the addition of dithiols takes place according to the Markovnikov rule. The primary adducts are unstable and are quickly converted into the corresponding substituted 1,4-dithiacycloheptane or 1,4-dithiane. The latter in turn can be converted under the reaction conditions or at high temperature into a thiolane derivative. The reaction of 2-ethoxypropenal with a twofold excess of ethane-1,2-dithiol at 60°C in the presence of p-toluenesulfonic acid leads to 2-methyl-2,2'-bi(dithiolane)     

Synthesis of new polyazines by 1,4 photochemical or anionic polymerization of 1,2-diaza-1,3-butadienes

Photochemical and anionic polymerizations of 1,2-diaza-1,3-butadienes are described. Photochemical polymerization was smoothly performed by irradiation of some 1-aminocarbonyl-1,2-diaza-1,3-butadienes with high pressure mercury arc (λ = 300 nm) in the presence of allyltributylstannane. Molecular weights (M_w) in the range 14.6-559 × 10² g/mol were obtained. The TGA curve revealed a first weight loss starting at about 200 °C of some 85%, and a second starting at about 300 °C. The DSC showed the glass transition (T_g) at about −34 °C. Anionic polymerization was performed by treatment of some 1-alkoxycarbonyl-1,2-diaza-1,3-butadienes with n-butyllithium. Molecular weights (M_w) in the range 8.44-242 × 10² g/mol were obtained.     

Interaction of benzimidazole-2-thione with propargyl bromide and 1,3-dibromopropyne

Interaction of benzimidazole-2-thione with propargyl bromide under found conditions permitted the direct synthesis of 2-(2-propynylsulfanyl)-3H-1,3-benzimidazolium bromide, the base 2-(2-propynylsulfanyl)-1H-1,3-benzimidazole, stable crystalline 2-(1,2-propadienylsulfanyl)-1H-1,3-benzimidazole, and 3-methyl[1,3]thiazolo[3,2-a][1,3]benzimidazole. The reaction of benzimidazole-2-thione with 1,3-dibromopropyne in chloroform or absolute methanol gave 2-(3-bromo-2-propynylsulfanyl)-3H-1,3-benzimidazolium bromide, and in absolute methanole in the presence of a twofold excess of sodium methoxide the reaction proceeded stereo-and regioselectively to give 3-[(Z)-bromomethylidene][1,3]thiazolo[3,2-a][1,3]benzimidazole. Presented to Academician B. A. Trofimov on his 70^th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, 1399–1405, September, 2008.     

Reactions of cyclic 1,3-dicarbonyl compounds with 1,2(1,4)-dihydro-1-methyl-2(4)-methylene-N-heterocycles. A new access to 6,12-methano-dibenz[d,g]-[1,3]oxazocinones

Summary The enamine-type methylene-N-heterocycles1–5 react with cyclic 2-ethoxymethylene-1,3-dicarbonyl compounds6 to give 2-[2-(hetarylidene)ethylidene]-1,3-dicarbonyl compounds7–14. The result of the reactions between 1,2-dihydro-1-methyl-2-methylene-quinoline (1a) and cyclic 1,3-dicarbonyl compounds depends on the nature of the dihydro intermediatesA/B. Dehydrogenation of keton intermediatesA results in 2-(1,2-dimethyl-4(1H)-quinolylidene)-1,3-dicarbonyl compounds17–21. Enol intermediatesB with 6-membered dicarbonyl ring form 6,12-methano-dibenz-[d,g][1,3]oxazocinones22–25.¹H NMR spectra and X-ray structure analysis prove the structure of23.

---

Reaktionen cyclischer 1,3-Dicarbonylverbindungen mit 1,2(1,4)-Dihydro-1-methyl-2(4)-methylen-N-heterocyclen. Ein neuer Zugang zu 6,12-Methano- dibenz[d,g][1,3]oxazocinonen

Zusammenfassung Aufgrund ihres Enamincharakters reagieren die Methylen-N-heterocyclen1–5 mit cyclischen 2-Ethoxymethylen-1,3-dicarbonylverbindungen6 zu den 2-[2-(Hetaryliden)ethyliden]-1,3-dicarbonylverbindungen7–14. Das Ergebnis der Reaktionen zwischen 1,2-Dihydro-1-methyl-2-methylen-chinolin (1a) und cyclischen 1,3-Dicarbonylverbindungen hängt von der Natur der zwischenzeitlich entstehenden DihydroverbindungenA/B ab. Die Intermediat-KetoneA gehen durch Dehydrierung während der Reaktion in die 2-(1,2-Dimethyl-4(1H)chinolyliden)-1,3-dicarbonylverbindungen17–21 über. Die Intermediat-EnoleB mit sechsgliedrigem Dicarbonylring bilden in intramolekularer Reaktion die 6,12-Methano-dibenz[d,g][1,3]oxazocinone22–25, deren Struktur am Beispiel der Verbindung23 durch¹H-NMR sowie durch Röntgenkristallstrukturanalyse bewiesen wird.

     

2-[2-(2,3-Dihydrobenzimidazolylidene)]- and 2-[2-(2,3-Dihydropyrido[2,3-d]imidazolylidene)]-5,5-dimethyl-1,3-cyclohexanediones

The reaction of 2-aminocarbonyl-5,5-dimethyl-1,3-cyclohexanedione with 2,3-diaminopyridine, 1,2-phenylenediamine (and its 4-methyl, 4-nitro, 4-carboxy, and 4-benzoyl derivatives), and 3,3-diaminobenzidine gave the corresponding 2-[2-(2,3-dihydrobenzimidazolylidene)]- and 2-[2-(2,3-dihydropyrido[2,3-d]imidazolylidene)]-5,5-dimethyl-1,3-cyclohexanediones. Their structure was confirmed by ¹H NMR spectroscopic data and X-ray analysis.     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

Excess molar volumes and viscosities of binary mixtures of 1,2-diethoxyethane with chloroalkanes at 298.15 K

Excess molar volumes (V _m ^E ) and viscosities (η) of the binary mixtures of 1,2-diethoxyethane with di-, tri- and tetrachloromethane have been measured at 298-15 K and atmospheric pressure over the entire mole fraction range. The deviations in viscosities (δlnη) and excess energies of activation (δG*^E) for viscous flow have been calculated from the experimental data. The Prigogine-Flory-Patterson (PFP) model has been used to calculateV _m ^E , and the results have been compared with experimental data. The Bloomfield and Dewan model has been used to calculate viscosity coefficients and these have also been compared with experimental data for the three mixtures. The results have been discussed in terms of dipole-dipole interactions between 1,2-diethoxyethane and chloroalkanes and their magnitudes decreasing with the dipole character of the molecules. A short comparative study with results for mixtures with polyethers and chloroalkanes is also described.     

Excess enthalpies of binary solvent mixtures of N-methylacetamide with aliphatic alcohols

The molar excess enthalpies H _m ^E of binary solvent mixtures of N-methylacetamide with methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol have been measured with a flow microcalorimeter at 40°C. The excess enthalpies are negative for methanol and positive for the other alcohols over the whole composition range, except for t-butanol which exhibits a sigmoid curve with a deep minimum at low mole fractions of the amide. The values for the primary alcohols increase in the order methanol < ethanol < 1-propanol < 1-butanol. The partial molar excess enthalpies have also been evaluated. Intermolecular interactions in these mixtures are discussed through comparison of the results with those for the corresponding binary mixtures of N,N-dimethylacetamide.     

Acid-Catalyzed Intra- and Intermolecular Acyl Exchabge in Mono- and Diglycerides

Acid-catalyzed transformation of 1-monolauroylglycerine (1-MLG) was investigated. It has been demonstrated that 1-MLG disproportionates readily and quickly into a mixture of 1,2- and 1,3-diacylglycerines and glycerine. The transformation of 1,3-diglycerides into 1,2-diglycerides was studied.     

Excess enthalpies of alkane-1-amines {CnH2n+1NH2, n = 3-8} + methyl methylthiomethyl sulfoxide and +dimethyl sulfoxide at 298.15 K

Excess enthalpies of binary mixtures between each of alkane-1-amines {C_nH_2n+1NH₂, n=3-8} and methyl methylthiomethyl sulfoxide (MMTSO) or dimethyl sulfoxide (DMSO) have been determined at 298.15 K. All mixtures showed positive enthalpy changes over the whole range of mole fractions.The limiting excess partial molar enthalpies of the aliphatic amines, H₁^E,∞, of all the mixtures with MMTSO or DMSO studied were smaller than those of MMTSO or DMSO, H₂^E,∞, respectively. Linear relations are obtained between limiting excess partial molar enthalpies and number of methylene groups.     

Deuterium Isotope Effect on Excess Enthalpies of Methanol or Ethanol and Their Deuterium Derivatives at 298.15 K

Excess enthalpies of six binary mixtures of CH₃ OD+CH₃ OH, CH₃ OD+CD₃ OD, CD₃ OD+CH₃ OH, C₂ D₅ OD+C₂ H₅ OH, C₂ D₅ OD+C₂ H₅ OD, C₂ H₅ OD+C₂ H₅ OH have been determined over the whole range of mole fractions at 298.15 K in order to know the isotopic effect on hydrogen-bonding accurately, although there are many reports on the differences in the strength of hydrogen-bonding between OH and OD. All excess enthalpies measured are very small and endothermic. The mixtures of CH₃ OD+ CH₃ OH, and C₂ D₅ OD+C₂ H₅ OH showed the largest excess enthalpies among each methanol and ethanol mixtures. The difference of intermolecular interaction between OH and OD in methanol and ethanol was almost same value of (1.82±0.04) J mol^-1 Excess enthalpies of 1,4-dimethylbenzene+1,3-dimethylbenzene and 1,4-dimethylbenzene+1,2-methylbenzene were measured by three different principle calorimeters at 298.15 K in order to know the precision of calorimetry for a small enthalpy change. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cationic ring-opening polymerizations of cyclic ketene acetals initiated by acids at high temperatures

Three unsubstituted cyclic ketene acetals (CKAs), 2-methylene-1,3-dioxolane, 1a , 2-methylene-1,3-dioxane, 2a , and 2-methylene-1,3-dioxepane, 3a , undergo exclusive 1,2-addition polymerization at low temperatures, and only poly(CKAs) are obtained. At higher temperatures, ring-opening polymerization (ROP) can be dominant, and polymers with a mixture of ester units and cyclic ketal units are obtained. When the temperature is raised closer to the ceiling temperature (T_c) of the 1,2-addition propagation reaction, 1,2-addition polymerization becomes reversible and ring-opened units are introduced to the polymer. The ceiling temperature of 1,2-addition polymerization varies with the ring size of the CKAs (lowest for 3a , highest for 2a ). At temperatures below 138°C, 2-methylene-1,3-dioxane, 2a , underwent 1,2-addition polymerization. Insoluble poly(2-methylene-1,3-dioxane) 100% 1,2-addition was obtained. At above 150°C, a soluble polymer was obtained containing a mixture of ring-opened ester units and 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxolane, 1a , polymerized only by the 1,2-addition route at temperatures below 30°C. At 67–80°C, an insoluble polymer was obtained, which contained mostly 1,2-addition units but small amounts of ester units were detected. At 133°C, a soluble polymer was obtained containing a substantial fraction of ring-opened ester units together with 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxepane, 3a , underwent partial ROP even at 20°C to give a soluble polymer containing ring-opened ester units and 1,2-addition cyclic ketal units. At −20°C, 3a gave an insoluble polymer with 1,2-addition units exclusively. Several catalysts were able to initiate the ROP of 1a, 2a , and 3a , including RuCl₂(PPh₃)₃, BF₃, TiCl₄, H₂SO₄, H₂SO₄ supported on carbon, (CH₃)₂CHCOOH, and CH₃COOH. The initiation by Lewis acids or protonic acids probably occurs through an initial protonation. The propagation step of the ROP proceeds via an S_N2 mechanism. The chain transfer and termination rates become faster at high temperatures, and this may be the primary reason for the low molecular weights (M_n ≤ 10³) observed for all ring-opening polymers. The effects of temperature, monomer and initiator concentration, water content, and polymerization time on the polymer structure have been investigated during the Ru(PPh₃)₃Cl₂-initiated polymerization of 2a . High monomer concentrations ([M]/[ln]) increase the molecular weight and decreased the amount of ring-opening. Higher initiator concentrations (Ru(PPh₃)₃Cl₂) and longer reaction times increase molecular weight in high temperature reactions. Successful copolymerization of 2a with hexamethylcyclotrisiloxane was initiated by BF₃OEt₂. The copolymer obtained displayed a broad molecular weight distribution; M̄_n = 6,490, M̄_w = 15,100, M̄_z = 44,900. This polymer had about 47 mol % of ( Me₂SiO ) units, 35 mol % of ring-opened units, and 18 mol % 1,2-addition units of 2a . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3655–3671, 1997     

Synthesis,ABTS-Radical Scavenging Activity,and Antiproliferative and Molecular Docking Studies of Novel Pyrrolo[1,2-a]quinoline Derivatives

A new 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS)-radical scavenging and antiproliferative agents of pyrrolo[1,2-a]quinoline derivatives have been synthesized. An efficient method for the synthesis of 14 novel diversified pyrrolo[1,2-a]quinoline derivatives has been described using 4-(1,3-dioxolan-2-yl)quinoline and different phenacyl bromides in acetone and followed by reacting with different acetylenes in dimethylformamide/K₂CO₃. The structure of the newly synthesized compounds was determined by infrared, ¹H NMR, ¹³C NMR, mass spectrometry, and elemental analysis. The in vitro antioxidant activity revealed that among all the tested compounds 5n exhibited maximum scavenging activity with ABTS. Compound 5b has showed good antiproliferative activity as an inhibitor of epidermal growth factor receptor (EGFR) tyrosine kinase.     

Isomer effects in the excess enthalpies of mixtures of alkanes and cycloalkanes

Using the Picker flow calorimeter, excess molar enthalpies H ^E have been obtained at 25°C for mixtures of 1,2-, 1,3- and 1,4-cis- and trans-dimethylcyclohexane and cis- and trans-decalin with n-hexadecane and the highly branched C₁₆ isomer, 2,2,4,4,6,8,8-heptamethylnonane. Values of H ^E are also obtained for cis- and trans-decalin mixed with C₆, C₇, and C₉ isomers. Anomalously low values of H ^E occur for normal alkanes mixed with cycloalkanes in the di-equatorial configuration, suggesting the presence of a negative contribution in H ^E possibly due to a restriction of n-alkane molecular motion by the flat, plate-like cycloalkane.     

Development of Abraham model correlations for enthalpies of solvation of organic solutes dissolved in 1,3-dioxolane

Published excess enthalpy of mixing data has been assembled from the chemical literature for binary mixtures containing 1,3-dioxalane. The experimental data were converted into partial molar enthalpies of solution and enthalpies of solvation for solutes dissolved in 1,3-dioxolane using standard thermodynamic relationships. The compiled enthalpy of solvation data for 59 different organic solutes was used to derive mathematical correlations based on the Abraham solvation parameter model. The derived correlations describe the experimental enthalpy of solvation data in 1,3-dioxolane to within a standard deviation of 2.0 kJ mol^?1.     

Carbon-phosphorus bond formation and transformation in the reaction of 1,2-diaza-1,3-butadienes with alkyl phenylphosphonites

The reaction of 1,2-diaza-1,3-butadienes with dialkyl phenylphosphonites under solvent-free conditions proceeds via zwitterionic intermediate and gives, by precipitation, the stable ylidic α-phosphanylidene-hydrazones that, in turn, can be transformed into the corresponding 3-phenyl-2H-1,2,3λ⁵-diazaphospholes. The latter compounds are converted by hydrolytic cleavage in methanol-water (95:5) into E-hydrazonophosphonates that are useful for the preparation of the corresponding β-ketophosphonates and 4-[alkoxy(phenyl)phosphoryl]-1,2-diaza-1,3-butadienes. These peculiar 1,2-diaza-1,3-butadienes, bearing an alkoxy(phenyl)phosphoryl group on the carbon atom in position 4 are also able to add different nucleophiles, such as methanol or thiourea, giving 2-[alkoxy(phenyl)phosphoryl]-2-methoxyhydrazones and 5-phosphinate-substituted thiazol-4-ones, respectively.     

1,2-Diphospha-3,4-diboretane und 1,3-Diphospha-2,4,5-triborolan: Synthese und Struktur sowie Berechnungen zur Molekülstruktur Über den Einfluß von Substituenten auf die Struktur von 1,2-Diphospha-3,4-diboretan

1,2-Diphospha-3,4-diboretanes and 1,3-Diphospha-2,4,5-triborolane: Synthesis and Structure as well as Calculations on the Molecular Structure On the Effect of Substituents on the Structure of 1,2-Diphospha-3,4-diboretane [2 + 2]-Cyclocondensation reactions led to the synthesis of the 1,2-diphospha-3,4-diboretanes [(t-BuP)₂B₂(NMe₂)₂], 1 a , and [(t-BuP)₂B(NMe₂)B(NiPr₂)], 1 b . Their molecular structures have been determined by X-ray methods, and these are compared with the structure of [(t-Bu)P? BN(iPr₂)]₂, 2 a . Compounds 1 show a folded B₂P₂ four membered ring having tert.-butyl groups in anti-positions. Ab initio calculations on 1,2-diphospha-3,4-diboretanes demonstrate that two conformers with anti-orientation of the substituents at the phosphorus atoms can be expected. These differ by the relative orientation of the almost planar P₂BR groups to the BP₂ plane. The influence of substituents (H and NH₂ at the B atoms, and H and Me at the P atoms) on the ring conformation has been studied. Finally, the first derivative of a 1,3-diphospha-2,4,5-triborolane, 3 a , is reported.     

Structural studies of 4-aryloctahydro-pyrido[1,2-c]pyrimidine derivatives

¹³C cross-polarisation magic angle spinning NMR data have been reported for four derivatives of 4-aryl-octahydro-pyrido[1,2-c]pyrimidine-1,3-dione and the X-ray diffraction data for two (with 2′-Me and 2′-OMe). The crystal structures show the presence of centrosymmetric cyclic dimers with intermolecular C1O?H-N or C3O?H-N hydrogen bonds, the configuration at the chiral centres (C4 and C4_a) was determined as RR (SS). The twisting of aromatic ring at C4 with respect to the pyrido[1,2-c]pyrimidine skeleton is about 68-109°.