地磁环境下结构变形引起的扰动磁场

基于磁弹性相互作用的线性化理论，针对地磁环境特点，忽略磁场对结构位移的影 响而仅考虑位移对磁场的耦合作用，通过将位移梯度引入变形后界面外法线矢量方 法，给出了变形引起的扰动磁场计算的定解场方程和界面衔接条件，并计算了符拉 芒问题的变形扰动磁场. 结果表明，变形扰动磁场完全取决于位移梯度在界面外法 向上的投影；扰动场强与外力成正比；空气中扰动磁场的法向强度和切向强度分布 特征明显不同，法向强度在力作用点对称分布，并且在 力作用点处存在奇点；切向强度则呈反对称分布，在力作用点处发生突变.     

带圆孔无限大受拉板的变形扰动磁场

利用磁弹性耦合问题的线性化理论,采用分离变量方法对带圆孔的无限大板在受拉应力和横向磁场共同作用下的变形扰动磁场进行了求解,得到了变形引致的扰动磁场的解析解,并对其强度量级和分布情况进行了讨论.结果表明,变形扰动磁场场强与外力成正比;与无变形磁场强度相比,变形扰动磁场小3个量级,但波峰波谷数目增加,且在圆孔边界径向扰动磁场强度迅速衰减.     

The Stress State of a Transversely Isotropic Ferromagnetic with a Parabolic Crack in a Homogeneous Magnetic Field

The magnetoelastic problem for a transversely isotropic ferromagnetic body with a parabolic crack in the plane of isotropy is solved explicitly. The body is in an external magnetic field, which is perpendicular to the plane of isotropy. The field induces elastic strains and a magnetic field in the body. The characteristics of the stress–strain distribution and induced magnetic field are determined; and their singularities in the neighborhood of the crack are analyzed. Formulas for the stress intensity factors of the mechanical and magnetic fields near the crack tip are presented     

软铁磁材料平面裂纹问题的耦合场

由磁弹性问题的线性化理论导出磁场下平面软铁磁体问题的控制方程和复势解。利用复势解和奇异积分方程方法,对面内磁场和远场载荷作用下的含裂纹无限大软铁磁平面问题进行了求解,得到耦合场的解。并对不同磁力模型的结果和磁场与机械载荷共同作用下的裂尖应力强度因子进行了讨论。     

Magnetoelastic interactions in a soft ferromagnetic body with a nonlinear law of magnetization: Some applications

Linearized equations and boundary conditions of a magnetoelastic ferromagnetic body are obtained with the nonlinear law of magnetization. Magnetoelastic interactions in a multi-domain ferromagnetic materials are considered for magneto soft materials, i.e. the case when the magnetic field intensity vector and magnetization vector are parallel. As a special case, the following two problems are considered: (1) the magnetoelastic stability of a ferromagnetic plate-strip in a homogeneous transverse magnetic field; (2) the stress–strain state of a ferromagnetic plane with a moving crack in a transverse magnetic field. It is shown that the modeling of magnetoelastic equations with a nonlinear law of magnetization provides qualitative and quantitative predictions on physical quantities including critical loads and stresses. In particular, it is shown that the critical magnetic field in plate stability problems found with the nonlinear law of magnetization is in better agreement with the experimental finding than the one found with a linear law. Furthermore, it is also shown that the stress concentration factor around a crack predicted with the nonlinear law of magnetization is more accurate than the one obtained with a linear counterpart. Numerical results are presented for above mentioned two problems and for various forms of nonlinear laws of magnetization.     

Interfacial crack problem in layered soft ferromagnetic materials in uniform magnetic field

The magnetoelastic plane strain problem of an interfacial Griffith crack between two dissimilar soft ferromagnetic elastic materials subjected to a uniform magnetostatic field is considered within the framework of linear magnetoelasticity. By making use of the Fourier integral transform technique, the mixed boundary problem is then reduced to a pair of singular integral equations of the second kind. Solutions of the singular integral equations are obtained numerically by means of a Jacobi polynomial expansion method. Effects of the magnetic field, the combinations of the magnetic properties of materials and the geometric parameters on the magnetoelastic stress intensity factors in the vicinity of crack tip are shown graphically.     

A small-scale magnetic-yielding model for an infinite magnetostrictive plane with a crack-like flaw

The effect of an external magnetic field on the fracture toughness of magnetostrictive materials has been investigated by determining the local stress fields around the tip of a very slender elliptical flaw embedded in an infinite magnetostrictive plane subjected to magnetic loading, based on the assumption of linear magnetization. In this paper, the above-mentioned analytical approach is extended to develop a small-scale magnetic-yielding model. The magnetic saturation zone is constructed and the distributions of magnetic field and magnetization are obtained around the tip of a slender elliptical crack. Based on the complex potential theory, the stress field is obtained in the vicinity of the tip of the slender elliptical crack by implementing the continuity conditions of displacement and resultant force at the interface between the magnetic saturation and magnetoelastic zones. The stress fields near the tip of the slender elliptical crack are obtained for two kinds of soft ferromagnetic materials each with a small induction magnetostrictive modulus. The theoretical results obtained show that the stresses in the neighborhood of a crack-tip are finite even when the elliptical crack reduces to a sharp crack, and are much smaller than the yield stress or the nominal fracture stress of the material. This suggests that, generally, the magnetic field has no obvious effects on the apparent fracture toughness of soft ferromagnetic materials, which is in agreement with the existing experimental results published in the existing literature. In addition, the theoretical analysis illustrates that no crack is magnetically impermeable, and the corresponding boundary conditions are inappropriate for fracture analysis of soft ferromagnetic materials.     

Nonlinear magnetoelastic coupling effects in a soft ferromagnetic material with a crack

In this paper, the magnetoelastic coupling effect in an infinite soft ferromagnetic material with a crack is analyzed. The nonlinear effect of magnetic field upon stress and the effect of the deformed crack configuration are taken into consideration. The coupling field is determined in the deformed configuration by regarding the deformed crack as an elliptical cylinder with its geometric coefficients, which are determined from a set of algebraic equations deduced from the displacements. The magnetic and stress fields near the crack tip are discussed for the case where both of the magnetic loading and the mechanical tension are present.     

Pre-kinking of a moving crack in a magnetoelectroelastic material under in-plane loading

A constant moving crack in a magnetoelectroelastic material under in-plane mechanical, electric and magnetic loading is studied for impermeable crack surface boundary conditions. Fourier transform is employed to reduce the mixed boundary value problem of the crack to dual integral equations, which are solved exactly. Steady-state asymptotic fields near the crack tip are obtained in closed form and the corresponding field intensity factors are expressed explicitly. The crack speed influences the singular field distribution around the crack tip and the effects of electric and magnetic loading on the crack tip fields are discussed. The crack kinking phenomena is investigated using the maximum hoop stress intensity factor criterion. The magnitude of the maximum hoop stress intensity factor tends to increase as the crack speed increases.     

Stress State of a Transversely Isotropic Ferromagnetic with an Elliptic Crack in a Homogeneous Magnetic Field

The magnetoelastic stress-strain problem for a transversely isotropic ferromagnetic body with an elliptical crack in the isotropy plane is solved explicitly. The body is in an external magnetic field perpendicular to the isotropy plane. The magnetic field induces elastic strains and an internal magnetic field in the body. The main characteristics of stress-strain state and induced magnetic field are determined and their features in the neighborhood of the crack are analyzed. Formulas for the stress intensity factors of the mechanical and magnetic fields near the crack tip are presented__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 48–59, January 2005.     

Changes in the natural frequency of a ferromagnetic rod in a magnetic field due to magnetoelastic interaction

Based on the magnetoelastic generalized variational principle and Hamilton＇s principle, a dynamic theoretical model characterizing the magnetoelastic interaction of a soft ferromagnetic medium in an applied magnetic field is developed in this paper. From the variational manipulation of magnetic scale potential and elastic displacement, all the fundamental equations for the magnetic field and mechanical deformation, as well as the magnetic body force and magnetic traction for describing magnetoelastic interaction are derived. The theoretical model is applied to a ferromagnetic rod vibrating in an applied magnetic field using a perturbation technique and the Galerkin method. The results show that the magnetic field will change the natural frequencies of the ferromagnetic rod by causing a decrease with the bending motion along the applied magnetic field where the magnetoelastic buckling will take place, and by causing an increase when the bending motion of the rod is perpendicular to the field. The prediction by the mode presented in this paper qualitatively agrees with the natural frequency changes of the ferromagnetic rod observed in the experiment.     

Loading effect on ACPD of a crack in ferromagnetic material

The loading effect on alternating current potential drop (ACPD) for a ferromagnetic material containing a two-dimensional surface crack was investigated under opening mode loading without shear (mode I). The change in potential drop due to load was obtained with and without a magnetic field around the specimen. To remove the magnetic field from the circumference of the specimen, a new measuring system using the characteristic of coaxial transmission line was made. When the magnetic field does not exist around the specimen, the change in potential drop with load is governed by the change in electromagnetic properties near the crack tip. The results obtained by using the new measuring system are the basis for an application of the ACPD technique to the experimental determination of the stress intensity factor, since they are independent of the arrangement of the measuring probe lines and the current supply lines. The relationship between the change in potential drop and the change in load is linearized by demagnetization. The change in potential drop per unit change in the stress intensity factor is independent of the crack length.     

含单个Ⅰ型裂纹的高温超导块材应力强度因子修正及计算

高温超导块材在外磁场下降过程中会受到拉伸应力的作用,可能导致其断裂,且其在受到拉伸应力作用时裂纹尖端产生小范围屈服,此时用线弹性理论计算应力强度因子将不准确。本文通过统一强度理论对裂纹尖端塑性区的应力强度因子计算公式进行修正。随后基于Bean模型分别讨论了外磁场变化速率和外磁场大小对应力强度因子的影响。结果表明高温超导块材充磁过程中,外磁场以较小速率下降时主要考虑外磁场下降速率对裂纹扩展的影响,当外磁场较大时,主要考虑外磁场大小对裂纹扩展的影响。本文结果对高温超导块材充磁过程中的裂纹扩展和应力强度因子的计算具有一定的参考价值。

     

Intensification of externally applied magnetic field around a crack in layered composite

Dynamic stress intensification around the crack in a layered composite subjected to an externally applied magnetic field is investigated. The effect of magnetic force is accounted for in the analysis as a body force. It tends to introduce damping into the system and reduces the intensification of the crack tip stress field. This is illustrated through the variations of the Mode I and Mode II stress intensity factors with time in addition to the influence of the geometric and material parameters of the composite structure. Numerical results are presented and discussed as the magnetic flux is varied with the physical parameters.     

In-plane perturbation of the tunnel-crack under shear loading I: bifurcation and stability of the straight configuration of the front

One considers a planar tunnel-crack embedded in an infinite isotropic brittle solid and loaded in mode 2+3 through some uniform shear remote loading. The crack front is slightly perturbed within the crack plane, from its rectilinear configuration. Part I of this work investigates the two following questions: Is there a wavy “bifurcated” configuration of the front for which the energy release rate is uniform along it? Will any given perturbation decay or grow during propagation? To address these problems, the distribution of the stress intensity factors (SIF) and the energy release rate along the perturbed front is derived using Bueckner–Rice's weight function theory. A “critical” sinusoidal bifurcated configuration of the front is found; both its wavelength and the “phase difference” between the fore and rear parts of the front depend upon the ratio of the initial (prior to perturbation of the front) mode 2 and 3 SIF. Also, it is shown that the straight configuration of the front is stable versus perturbations with wavelength smaller than the critical one but unstable versus perturbations with wavelength larger than it. This conclusion is similar to those derived by Gao and Rice and the authors for analogous problems.     

Dielectric crack problem for a magnetoelectroelastic strip with functionally graded properties

The paper presents a fracture analysis for an electromagnetically dielectric crack in a functionally graded magnetoelectroelastic strip. It is considered that the material properties are varying exponentially along the width direction. Under the assumption of the in-plane magneto-electro-mechanical loadings, the dielectric crack is simulated by using the semi-permeable crack-face boundary conditions. The Fourier transform technique is applied to solve the boundary-value problem and four coupling singular integral equations are determined. A nonlinear system of algebraic equations is further derived and solved numerically to determine the electromagnetic field inside the crack. Then the field intensity factors of stress, electric displacement, and magnetic induction are given. Through the numerical computations, the effects of the material non-homogeneity and the permeability of crack interior on the electric displacement and the magnetic induction at the crack faces are studied. The variations of the intensity factors of stress, electric displacement, and magnetic induction versus the geometry of the crack, the strip width, and the material non-homogeneity are presented in graphics respectively.     

Near-tip out of plane displacement fields for dynamic crack propagation in functionally graded materials

Asymptotic expansion for the out of plane displacement field around a crack propagating along the gradient in a functionally graded material is developed. The irregular behavior of one of the terms in the expansion at low crack speeds is further examined and a remedial solution, which is well behaved at low crack speeds, is proposed. The developed out of plane displacement field is used to estimate stress intensity factor from quasi-static finite element solution. The results indicate that inclusion of the proposed nonhomogeneity specific terms gives estimates of stress intensity factor, which are consistent with existing analytical predictions.     

Observation of Stress Field Around an Oscillating Crack Tip in a Quenched Thin Glass Plate

The variation of stress field around an oscillating crack tip in a quenched thin glass plate is observed using instantaneous phase-stepping photoelasticity. The successive images around the propagating crack are recorded by a CCD camera that is equipped with a pixelated micro-retarder array. Then, the phase maps of the principal stress difference and the principal direction are easily obtained even though the photoelastic fringes cannot be visualized. The path of the crack growth as well as the stress intensity factors and the crack tip constraint are obtained from these phase distributions. Results show that the mode I stress intensity factor and the crack tip constraint vary remarkably with the crack growth. In addition, the results show that the mode-II stress intensity factor exists even though the crack propagates smoothly.     

Theoretical model of crack branching in magnetoelectric thermoelastic materials

Thermomagnetoelectroelastic crack branching of magnetoelectro thermoelastic materials is theoretically investigated based on Stroh formalism and continuous distribution of dislocation approach. The crack face boundary condition is assumed to be fully thermally, electrically and magnetically impermeable. Explicit Green’s functions for the interaction of a crack and a thermomagnetoelectroelastic dislocation (i.e., a thermal dislocation, a mechanical dislocation, an electric dipole and a magnetic dipole located at a same point) are presented. The problem is reduced to two sets of coupled singular integral equations with the thermal dislocation and magnetoelectroelastic dislocation densities along the branched crack line as the unknown variables. As a result, the formulations for the stress, electric displacement and magnetic induction intensity factors and energy release rate at the branched crack tip are expressed in terms of the dislocation density functions and the branch angle. Numerical results are presented to study the effect of applied thermal flux, electric field and magnetic field on the crack propagation path by using the maximum energy release rate criterion.     

Crack problem for superconducting strip with finite thickness

The inclined crack problems are considered for a thin strip and a strip with finite thickness in a perpendicular magnetic field. The critical current density is assumed to be a constant. The crack orientation is varied and the effect of crack on the magnetic field distribution is neglected. Based on the analytical results and variational inequality, the field and current distributions are computed for both thin strip and strip with finite thickness cases, respectively. Then, the stress intensity factors at the crack tip are determined using the finite element method for magnetic field loads. The numerical results are presented for different inclined crack angles, magnetization processes and geometry parameters of the strip. The results show that the fracture behavior of the strip with finite thickness is more complicated than that of the thin strip. With the numerical results, we can predict the largest possibility of cracking as the strip is in an external field.