共查询到20条相似文献,搜索用时 31 毫秒
1.
The surface potential at the silver chloride aqueous interface was measured by means of a single-crystal silver chloride electrode (SCr-AgCl). The measurements were conducted by titration of the KCl solution with AgNO3, and vice versa. The SCr-AgCl electrode potentials were converted to surface potentials psi(0) by setting zero at the point of zero charge at pCl = 5.2. The psi(0)(pCl) function was linear, with a slope 12% lower with respect to the Nernst equation. It was demonstrated that the surface potential at the silver halide aqueous interface could be interpreted by means of the surface complexation model, originally developed for metal oxides. 相似文献
2.
A device for measuring surface potentials of individual crystal planes was constructed. The surface potentials of the (0 1 2), (1 0 -2), (1 1 3), and (1 1 -3) crystal planes of hematite were measured as a function of pH at different sodium nitrate concentrations. Results of measurement enabled differentiation between the planes, showing agreement with the surface potentials obtained with a single-crystal hematite electrode. At low ionic strength there was no significant difference in potential between the crystal planes, whereas at relatively high ionic strength the difference was noticeable. In the absence of counterion association, but also in the case of their symmetric association taking place, point of zero potential (pH(pzp)) coincides with other zero points, i.e., with the isolectric point (pH(iep)) and the point of zero charge (pH(pzc)). If the counterion affinities toward association are not equal, the pH(pzp) is shifted in the same directions as the pH(pzc). The shift in the point of zero potential to the basic region was more pronounced for the (1 1 -3) plane than for the (1 0 -2) one, indicating a higher affinity of anions for association with oppositely charged surface groups compared to cations. It was demonstrated that measurements of surface potentials of individual crystal planes could help to better understand the equilibrium at solid/liquid interfaces. 相似文献
3.
Kosmulski M 《Journal of colloid and interface science》2001,238(1):225-227
Electrokinetic measurements and potentiometric titrations of indium oxide (commercially available reagent grade powder, washed with NaOH and HNO(3) to remove strongly adsorbed species) indicate the pristine point of zero charge to be pH 8.7. The isoelectric point at pH 9 was obtained for gallium oxide prepared in the same way. These values match the pristine point of zero charge of alumina, but they are much higher than the values reported for indium oxide and gallium oxide in the literature. Copyright 2001 Academic Press. 相似文献
4.
Construction of a metal oxide electrode enabling measurement of surface potential is described. The electrode was made using a hematite monocrystal, which avoids the problems arising from the possible porosity of the oxide layer. The potential of this electrode was measured as a function of pH. The hematite electrode provides reproducible results, especially in the acidic region. Surface potentials were calculated from electrode potentials using the electrokinetic isoelectric point. The slope of surface potential with respect to pH was found to be lower than the Nernstian, especially in the basic region. The effect was more pronounced at higher ionic strengths. It was shown how the measurement of surface potential can help to interpret the equilibrium data and evaluate the choice of a theoretical model describing the interfacial equilibrium at the metal oxide-water interface. 相似文献
5.
The new method of evaluation of the point of zero potential for the metal oxide exhibiting a saddle-like surface potential function Ψ 0(pH), as obtained by acid base potentiometric titration using Single Crystal Electrode, was proposed. The electrode potential of sapphire single crystal electrode (A crystal plane, $11\bar{2}0$ ) was measured, point of zero potential and surface potentials were evaluated, and the results were analyzed using the Surface Complexation Model. The electroneutrality point corresponding to the point of zero potential was found to be at pHpzp=7.0. Thermodynamic protonation equilibrium constants for the first and the second step of protonation were obtained as $\lg K_{1}^{\circ} = 12.7$ ; $\lg K_{2}^{\circ} = 1.2$ . 相似文献
6.
Electrostatic potential at the inner plane of the hematite aqueous interface, i.e., surface potential, was measured by means of a single-crystal hematite electrode. Acidic solutions were titrated with base and then back-titrated with acid. Surface potentials were evaluated from electrode potentials by setting the zero value at the isoelectric point. In the case of fast titrations the equilibration time was approximately 10 min, and significant hysteresis was obtained, more pronounced at higher electrolyte concentrations. Hysteresis disappeared in slow titration runs when the equilibration time was extended up to 120 min, and also when ultrasound was applied. Hysteresis was observed in the pH region close to neutrality, where the concentrations of potential-determining H+ and OH- ions are low. Equilibration was fast in acidic and basic regions. These results are explained on the basis of the kinetics of surface reactions, supported by the following rate of single-crystal electrode equilibration. It is concluded that the equilibration rate at the interface is specific for a given system and is not a general phenomenon. As several systems may undergo fast equilibration, such data may be regarded as equilibrium data and interpreted by the surface complexation model. In other cases, one should perform kinetic tests and apply extended equilibration times. 相似文献
7.
Equilibrium parameters characterizing the ice-water interface were obtained from electrokinetic and potentiometric data. The dependency of surface potential on pH was measured by the ice electrode. Electrokinetic zeta potentials were measured by electrophoresis. In the interpretation, the 1-pK and 2-pK concepts of the surface complexation model, developed for metal oxides, were used. The equilibrium parameters (constants of surface reactions) were determined. The results were confirmed by numerical simulations. Both 1-pK and 2-pK models fit the experimental data well. 相似文献
8.
Yu. Yu. Petrov S. Yu. Avvakumova M. P. Sidorova L. E. Ermakova O. M. Merkushev 《Colloid Journal》2010,72(5):663-668
Electrosurface characteristics of tungsten oxide in solutions of 1: 1 electrolytes are studied in a wide range of concentration
and pH values. The dependence of the position of isoelectric point on the concentration of background electrolyte and the
cation nature is revealed. The equilibrium constants of surface reactions, adsorption potentials of ions, specific surface
conductivities, and degrees of dissociation of surface groups in the point of zero charge are calculated. 相似文献
9.
Barale M Lefèvre G Carrette F Catalette H Fédoroff M Cote G 《Journal of colloid and interface science》2008,328(1):34-40
Zetametric measurements on suspensions of oxide particles (cobalt ferrite, nickel ferrite, and magnetite) representative of corrosion products from primary circuits of pressurized water reactors were performed at 25 and 70 degrees C in the presence of lithium and borate species. No effect of lithium ions was observed. Borate species cause a decrease of the isoelectric point (IEP), attributed to the sorption of borate as a negative complex MOB(OH)3(-). A predictive model based on thermodynamic calculations (2-pK and diffuse layer models) of the surface acidity constants from the data of acid-base titrations combined with an empirical relationship between the surface potential Psi 0 and the zeta potential determined by zetametry was developed. A whole set of parameters valid at 25 degrees C, in a range of ionic strength between 10(-4) and 10(-2) molL(-1) and in a range of pH between 4 and 8, was determined for this model. Increase of temperature to 70 degrees C in the presence of borate results in a decrease of IEP for cobalt ferrite and an increase of the IEP for nickel ferrite. 相似文献
10.
Successfully modeling the surface charge of goethite and anion adsorption on goethite using a surface complexation model (SCM) alone cannot verify the assumptions of this model. In this study, the assumptions of 2-pK triple layer model (TLM) and two-site 1-pK basic stern model (BSM) were assessed with respect to their ability to interpret both the proton-anion adsorption ratios of dimethylarsinate (DMA), monomethylarsonate (MMA), and arsenate and their effect on the zeta-potential. The proton-DMA adsorption ratio is around 0.9 at pH 4.25 and 1.1 at pH 6.75 at DMA surface coverage ranging from 0 to 2 micromol m(-2), and the zeta-potential is independent of DMA adsorption at these two pH values. The proton-MMA adsorption ratio increases to 1.5 at pH 4 and 2.1 at pH 6.75 as the MMA surface coverage decreases to 0.5 micromol m(-2). The zeta-potential is less dependent on MMA adsorption at a surface coverage range of 0 to 1.8 micromol m(-2), and it then decreases with a further increase in the MMA surface coverage at pH 4 and 6.75. The proton-arsenate adsorption ratio decreases to 2 as the arsenate surface coverage approaches zero, and the zeta-potential decreases linearly with the increasing arsenate surface coverage at pH 4 and 6.75. Neither the 2-pK TLM nor the 1-pK BSM give a consistent interpretation of both the proton-arsenic adsorption ratio and the effect of arsenic on the zeta-potential. The results suggest that the 1-pK MUSIC model in which each type of surface hydroxyls has its own intrinsic proton-affinity constant and only one type of surface hydroxyls is involved in DMA, MMA, and arsenate adsorption is preferably pursued. The protonation degree of reactive hydroxyls estimated from proton-arsenic adsorption ratios is 0.2 at pH 4 and 0 at pH 6.75 in 0.001 M NaNO(3). 相似文献
11.
Interfacial charge in a solid/liquid system is due to interactions of ions with surface sites affected by the electrostatic potential that is a consequence of their accumulation. The present theoretical approach is based on the so-called Surface Complexation Model that has several modifications known as either the 1-pK, the 2-pK, or the "MUSIC" model. These models assume different surface reactions and their equilibrium constants, taking into account electrostatic interactions. For that purpose the relationships between potentials affecting the state of interfacial ions and their surface densities need to be known, so that a certain model of the electrical interfacial layer should be introduced. The complexity of the problem results in the use of a variety of different theoretical approaches that cannot be distinguished experimentally. This article discusses several aspects of the problem, such as counterion association, structure of the electrical interfacial layer, potential-charge relationships, surface potentials, the zero charge condition, enthalpy of surface reactions, and the influence of the interfacial ionic equilibrium on the colloid stability. Copyright 2000 Academic Press. 相似文献
12.
The specific features of the electric double-layer structure at polycrystalline electrodes in the absence of specific ion adsorption have been examined for two different models: Model I and Model II. In the case of Model I each of the faces showing on the surface of a polycrystalline electrode retains its own Helmholtz and diffuse double layers. In the case of Model II the faces retain only their own Helmholtz layer, whereas the diffuse layer is common to the entire electrode surface. The difference of zero charge potentials of the faces is defined both by their dissimilar hydrophilic properties and by different work functions. The experimental data available at present on the electric double-layer structure at polycrystalline electrodes for which the potentials of zero charge of the faces differ significantly are described by Model I. 相似文献
13.
Baldelli S Mailhot G Ross PN Somorjai GA 《Journal of the American Chemical Society》2001,123(31):7697-7702
Sum frequency generation (SFG) vibrational spectra of D(2)O and/or acetonitrile (CH(3)CN) on a Pt(111) single-crystal electrode were obtained as a function of applied potential in a 5 mol % water/acetonitrile mixed solvent with different 0.1 molar MSO(3)CF(3) salts (M = H(+), Li(+), Na(+), K(+), and Cs(+)). The results provide a very specific model for the composition of the inner Helmholtz layer as a function of potential and surface charge. Acetonitrile dominates the inner layer with the CN group directed toward the metal at potentials where the metal has a positive charge. As the surface becomes negatively charged, the acetonitrile orientation flips 180 degrees, with the CH(3) group pointing toward the surface. At even more negative surface charge, D(2)O displaces acetonitrile from the inner layer and is the predominant molecule on the surface. Here water is present as an oriented molecule with the oxygen end pointing toward the metal. The potential (and surface charge) where water is the dominant molecule in the inner Helmholtz layer is determined by the solvation energy of the cation. 相似文献
14.
The adsorption of surfactants, which form insoluble monolayers on an aqueous substrate, onto a single crystal gold electrode have been described. Adsorption of this class of surfactants have been characterized using a combination of electrochemistry and Langmuir-Blodgett techniques. We have developed a technique to simultaneously measure the film pressure at the gas-solution (GS) interface and the film pressure of the surfactants that spread to the metal-solution (MS) interface. We have shown that surfactants such as octadecanol and stearic acid, which interact weakly with the metal surface, adsorb at an uncharged MS interface (at the potential of zero charge) and progressively desorb when the electrode surface is charged negatively. The electrode potential (charge density at the metal surface) influences the transfer of the surfactant from the GS interface to the MS interface. The transfer ratio is 1:1 at an uncharged MS interface, and is progressively reduced to zero when the MS interface is charged. We have employed 12-(9-anthroloxy) stearic acid, a surfactant dye molecule, to study the mechanism of potential induced desorption and adsorption of the film of insoluble molecules. With the help of electroreflectance spectroscopy and light scattering measurements, we have shown that if desorbed, the surfactant molecules form micelles (flakes or vesicles) that are trapped under the electrode surface. The micelles spontaneously spread back onto the electrode surface when the charge density at the metal approaches zero. The repeatable desorption and readsorption involve micellisation of the film at negative potentials and spontaneous spreading of the micelles to reform the monolayer at potentials close to pzc. 相似文献
15.
For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods. 相似文献
16.
Lützenkirchen J 《Journal of colloid and interface science》2005,290(2):489-497
Surface titrations of minerals in aqueous electrolyte solutions are used as building blocks for surface complexation modelling. However, these potentiometric data may contain less model relevant information than previously and presently assumed. In the literature, derivative analyses have been applied to experimental surface charge versus pH curves and four or more pK values were extracted for goethite or aluminium oxide. Derivative analysis of specific surface charge versus pH curves calculated for various published model variants for goethite shows that not more than the net-zero proton surface charge condition can be extracted from computer generated data. Generated data can be produced in density and precision superior to experimental data, but yield only relatively little output from such derivative analysis compared to what has previously been extracted from derivatives of experimental data. For the generated goethite data and for all model variants only the point of zero could be extracted. For the various goethite model variants tested a nearly symmetrical peak appeared at the point of zero charge in the derivative curve. A different pattern could be obtained for generic models, for which two sites with unequal sites densities and different pK values were assumed. Variation of these parameters could result in derivatives of the charging curves with two maxima or one maximum and a broad tailing. In the literature, curves with features nearly identical to these generated curves have been interpreted by up to four pK values (i.e., four different sites within a 1-pK model). It is concluded that the interpretation of the generated data is in all cases hampered by the overwhelming electrostatic contributions to the free energy of proton ad/desorption. In no case except for the one-site 1-pK model was it possible to extract the input pK value(s) from the derivatives. Plausible explanations for the discrepancy between generated data and published experimental data are discussed. 相似文献
17.
The relative equations among intrinsic surface reaction equilibrium constants (K in 1-pK model, K(a1)(int) and K(a2)(int) in 2-pK model, and *K(Na)(int) and *K(Cl)(int) in inert electrolyte chemical binding model), points of zero charge (PZC), and structural charge density (sigma(st)) for amphoteric solids with structural charge were established to investigate the effects of sigma(st) on intrinsic equilibrium constants and PZC. The intrinsic equilibrium constants of HTlc with general formulas [(Zn,Mg)(1-x)Al(x)(OH)(2)](Cl,OH)(x) and [Mg(1-x)(Fe,Al)(x)(OH)(2)](Cl,OH)(x) were evaluated. The following main conclusions were obtained. For amphoteric solids with structural charge, a point of zero net charge (PZNC) independent of electrolyte concentration (c) exists. A common intersection point (CIP) should appear among the acid-base titration curves at different c, and the pH at the CIP is pH(PZNC). The pK, pK(a1)(int), and pK(a2)(int) may be expressed as a function of pH(PZNC) and sigma(st), and these intrinsic equilibrium constants can be directly calculated from pH(PZNC) and sigma(st). The inert electrolyte chemical binding does not exist for amphoteric surfaces with structural charge. PZNC is not equal to the point of zero net proton charge (PZNPC) when sigma(st) not equal 0. pH(PZNC) > pH(PZNPC) when sigma(st)>0; pH(PZNC) < pH(PZNPC) when sigma(st)<0; and pH(PZNC) = pH(PZNPC) only when sigma(st)=0. With increasing c, the difference between pH(PZNC) and pH(PZNPC) decreases; i.e., pH(PZNPC) moves forward to pH(PZNC) with increasing c. For the HTlc samples studied, with increasing x, the pH(PZNC) and the pK(a1)(int) and pK(a2)(int) decrease, and the pK increases. These results can be explained on the basis of the affinity of metal cations for H(+) or OH(-) and the electrostatic interaction between the charging surface and H(+) or OH(-). 相似文献
18.
The position of electronic energy levels in a phase depends on the surface potentials at its boundaries. Bringing two phases in contact at an interface will alter the surface potentials shifting the energy levels relative to each other. Calculating such shifts for electrochemical interfaces requires a combination of methods from computational surface science and physical chemistry. The problem is closely related to the computation of potentials of electrochemically inactive electrodes. These so-called ideally polarizable interfaces are impossible to cross for electrons. In this perspective we review two density functional theory based methods that have been developed for this purpose, the workfunction method and the hydrogen insertion method. The key expressions of the two methods are derived from the formal theory of absolute electrode potentials. As an illustration of the workfunction method we review the computation of the potential of zero charge of the Pt(111)-water interface as recently published by a number of groups. The example of the hydrogen insertion method is from our own work on the rutile TiO(2)(110)-water interface at the point of zero proton charge. The calculations are summarized in level diagrams aligning the electronic energy levels of the solid electrode (Fermi level of the metal, valence band maximum and conduction band minimum of the semiconductor) to the band edges of liquid water and the standard potential for the reduction of the hydroxyl radical. All potentials are calculated at the same level of density functional theory using the standard hydrogen electrode as common energy reference. Comparison to experiment identifies the treatment of the valence band of water as a potentially dangerous source of error for application to electrocatalysis and photocatalysis. 相似文献
19.
Adsorption of protons on a heterogeneous solid surface is modeled using the Monte Carlo (MC) simulation method. The surface of an oxide is assumed to consist of adsorption sites with pK assigned according to a quasi-Gaussian distribution. The influence of the electrostatic interactions combined with the energetic heterogeneity of the surface is examined and the MC results are compared with the predictions of the analytical 1-pK approach. The surface potential behavior is examined using both "experimental" MC results and "theoretical" results obtained from the application of 1-pK model. The results are compared qualitatively with experimental determination of the surface potential of metal oxide surfaces. They confirm that the relation between the surface potential and the pH of bulk solution should not be described by the Nernst equation but by the equation with the parameter linearly reducing Nerstian potential. The values of this parameter are examined with respect to degree of surface energetic heterogeneity and site density of the surface. 相似文献
20.
Bourikas K Kordulis C Lycourghiotis A 《Advances in colloid and interface science》2006,121(1-3):111-130
The mechanism of the protonation of solid metal (hydr)oxides in aqueous media was investigated using simulation and experimental work. It was found that the apparent acidity/basicity of each kind of surface sites of metal (hydr)oxides in aqueous suspensions is strongly influenced by the overall surface charge of the (hydr)oxide and thus by the electrical potential smeared out at the interfacial region. Depending on its sign this increases or decreases the hydrogen ion concentration on the surface, thus promoting or hindering protonation. This is manifested by the shifts of the protonation peaks of the various kinds of sites with respect to the -pK values of the corresponding intrinsic protonation constants and the appearance of an extra peak in the d[H+cons,surf]/dpH vs. pH curves. Potentiometric titrations experiments performed for four technologically important oxides showed that the proposed protonation mechanism describes indeed the protonation of polycrystalline (hydr)oxides in aqueous media. 相似文献