Hydration patterns and salting effects in sodium chloride solution

The salting effects of 2M sodium chloride electrolyte are studied based on a series of model solutes with properties ranging from hydrophobic to hydrophilic. Generally, hydrophobic solutes will be salted out and hydrophilic solutes will be salted in by NaCl solution. The solvation free energy changes are highly correlated with Kirkwood-Buff integrals. The underlying mechanism resorts to the preferential binding of ions and water to solutes. Our results demonstrate that the salting effect not only depends on the salt's position in Hofmeister series, but also on the solutes' specifics. Taking the hydration free energies of solutes and ions as independent variables, a schematic diagram of salting effects is suggested. The resolved multifaceted salting effects rely on the sensitive balance of the tripartite interaction among solutes, ions, and water.     

In-capillary derivatization and capillary electrophoresis separation of amino acid neurotransmitters from brain microdialysis samples

A new in-capillary derivatization method with naphtalene-2,3-dicarboxyaldehyde (NDA)/CN(-) has been developed for capillary electrophoresis with laser-induced fluorescence detection of brain microdialysate amino acids. Samples are sandwiched between two plugs of reagent mixture at the capillary inlet and subsequently separated. Highest derivatization yields are obtained by using a reagent to sample plug length ratio equal to 4, performing a first electrophoretic mixing followed by a zero potential amplification step before applying the separation voltage and using a NaCN to NDA concentration ratio equal to 1. This new single-step methodology allows the analysis of amino acid neurotransmitters in rat brain microdialysis samples.     

Urine polyamines determination using dansyl chloride derivatization in solid-phase extraction cartridges and HPLC

The derivatization of biogenic amines such as putrescine, cadaverine, spermidine and spermine with dansyl chloride in solid phase extraction cartridges is described. Different types of filling materials were tested in order to have the highest retention of the different analytes. The best results were obtained by using C18 cartridges. The optimal conditions were: amine solution buffered at pH 12, 2 mM dansyl chloride (acetone-bicarbonate solution 20 mM (pH 9-9.5), 2 + 3 v/v) as reagent concentration, room temperature and 30 min reaction time. The developed procedure was applied to the determination of these polyamines in urine samples from healthy controls and cancer patients using HPLC with 1,7-diaminoheptane as internal standard. The concentrations ranged from 0.5 to 5 micrograms mL-1 and the detection limits were 10 ng mL-1 for all polyamines. By concentrating the urine extracts, the detection limits were improved down to 2 ng mL-1. The accuracy and the precision of the method were tested. The proposed dansylation method is advantageous with respect to solution dansylation. It improves the total analysis time, avoids high temperatures that can affect the thermal stability of the derivatives and could make possible the automation of the procedure.     

Capillary electrophoretic determination of thiosulfate,sulfide and sulfite using in-capillary derivatization with iodine

A new capillary electrophoresis (CE) method was developed for the rapid, simple and selective determination of thiosulfate, sulfide and sulfite species. The proposed method is based on the in-capillary derivatization of separated sulfur anions by mixing their zones with the iodine zone during the electrophoretic migration and direct UV detection of iodide formed. The optimal conditions for the separation and derivatization reaction were established by varying electrolyte pH, electrolyte counter-ion, concentration of iodine, and applied voltage. The optimized separations were carried out in 20 mmol/L Tris-chloride electrolyte (pH 8.5) using direct UV detection at 214 nm. All three sulfur species were well resolved in less than 4 min. The method gives repeatability comparable or even better than this obtained for sulfur anions using standard CE technique. The proposed CE system was applied to the monitoring of sulfur anions in spent fixing solutions during the electrolytic oxidation.     

In-capillary derivatization and laser-induced fluorescence detection for the analysis of organophosphorus pesticides by micellar electrokinetic chromatography

We developed a rapid and sensitive method using in-capillary derivatization and laser-induced fluorescence (LIF) detection for the fully automated analysis of organophosphorus pesticides (OPPs), including glufosinate, aminomethylphosphonic acid (AMPA) and glyphosate by micellar electrokinetic chromatography (MEKC). The potential of 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as in-capillary derivatization reagent is described for the first time. The unique feature of this MEKC method is the capillary being used as a small reaction chamber. In in-capillary derivatization, the sample and reagent solutions were injected directly into the capillary by tandem mode, followed by an electrokinetic step to enhance the mixing efficiency of analytes and reagent plugs in accordance with their different electrophoretic mobilities. Standing a specified time for reaction, the derivatives were then immediately separated and determined. Careful optimization of the derivatization and separation conditions allowed the determination of glufosinate, AMPA and glyphosate with detection limits of 2.8, 3.6 and 32.2 ng/mL, respectively. These detection limits were comparable to those of 1.4, 1.9 and 23.8 ng/mL obtained from conventional pre-capillary derivatization. Furthermore, repeatability better than 0.40% for migration time and 3.4% for peak area, as well as shorter migration time, was obtained. The method was successfully applied to the analysis of spiked river water sample with satisfactory results.     

The determination of hydroxide and carbonate in concentrated sodium chloride solutions

A computer method for the determination of carbonate and hydroxide in concentrated (2.89 M) sodium chloride solutions is described. The method is based on multiparametric curve-fitting and can also be applied to salts of dibasic acids with unknown equilibrium constants. The systematic error is not more than 1%. The titration and calculation takes less than 20 min.     

Dilute solution properties of poly(dimethyldiallylammonium chloride) in aqueous sodium chloride solutions

MW fractions of poly(dimethyldiallylammonium chloride) (PDMDAAC) were prepared by preparative size-exclusion chromatography and characterized by static and dynamic light scattering, viscometry, size-exclusion chromatography, and electrophoretic light scattering, in 0.50M NaCl solution. The behavior of fractions with MW < 2 × 10⁵ was as expected for a strong polyelectrolyte in a good solvent, with a Mark-Houwink exponent of ca. 0.8, and MW-dependencies of the hydrodynamic radius and the radius of gyration of corresponding magnitude. At higher MW, curvature appears in the MW-dependencies, which can be best explained by the presence of branching. While this notably lowers the intrinsic viscosity at high MW, the electrophoretic mobility is unchanged regardless of molar mass. Thus, the branched polymers display the electrophoretic free-draining behavior characteristic of linear polyelectrolytes. ©1995 John Wiley & Sons, Inc.     

In-capillary derivatization and analysis of ephedrine and pseudoephedrine by micellar electrokinetic chromatography with laser-induced fluorescence detection

This paper describes an automatic rapid approach for in-capillary derivatization of ephedrine (E) and pseudoephedrine (PE) and subsequent sensitive determination of the derivatives by micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence (LIF) detection using 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as fluorescent reagent. The unique feature of this method is the capillary being used as a small reaction chamber, in which the sample, derivatization buffer and reagent solutions were injected directly into the capillary by tandem mode, followed by an electrokinetic step (5 kV, 15s) to enhance the mixing efficiency of analytes and reagent plugs. Standing a specified time of 1 min for reaction, the derivatives were then immediately separated and determined. Several parameters for in-capillary derivatization and subsequent MEKC separation were systematically investigated. Under these optimized conditions, a baseline separation of the two analytes was achieved within 10 min and the derivatization concentration limits of detection were found to be 4.8 ng mL(-1) for E and 1.6 ng mL(-1) for PE, respectively. The method was validated in terms of precision, linearity, accuracy and successfully applied for the determination of the two alkaloids in ephedra herb and its preparations.     

Helium diffusion in aqueous sodium chloride solution at high pressures

A molecular dynamic investigation of self-diffusion coefficients of helium and water in aqueous NaCl solution is performed. To understand the nonlinear behavior of the self-diffusion coefficients, a number of structural characteristics (radial distribution functions, hydrogen bond network topology) are calculated. The electrolyte concentration range is discussed in which a local increase in helium self-diffusion coefficient is observed. It is shown that this behavior is caused by a breakdown of the network of hydrogen bonds due to competition between ion positions in the states of solvent-separated and contact pairs.     

Relationships between microstructure and pitting corrosion of ADI in sodium chloride solution

Austempered ductile iron (ADI) has complex microstructure containing a multiphase matrix (called ‘ausferrite’), graphite spheres and oxide inclusions. The corrosion resistance of ADI is related to its microstructure which is determined by heat treatment parameters (like austempering temperature, austempering time, austenitising temperature and austenitising time). In the present paper, the electrochemical behaviour and corrosion resistance of ADI have been investigated by means of the electrochemical microcell technique and classical electrochemical measurements in sodium chloride solution. Particular attention has been paid to the influence of austempering temperature on the microstructure and pitting corrosion. It has been shown that ADI austempered at 430 °C has upper ausferritic microstructure and reveals a better corrosion resistance in sodium chloride solution than ADI austempered at 280 °C. Moreover, the corrosion resistance increases as the volume fracture of ferrite increases and the carbon content of austenite decreases. The good corrosion behaviour of ADI austempered at 430 °C was also related to the good coarsening of the austenite grains and broad ferrite needles (less ferrite/austenite interfaces). It has been demonstrated that silicon is the alloying element hindering the anodic dissolution of the alloy.     

Coacervation of copolymer of diallyldimethylammonium chloride and sodium styrenesulfonate aqueous solution

Coacervate behavior of polyelectrolyte complexes has been studied by many papers. Few studies have focused on the coacervate behavior of amphoteric polymer. In this study, amphoteric copolymer of diallyldimethylammonium chloride (DM) and sodium styrenesulfonate (SS) (the copolymer was noted as DMS) was synthesized with the mole content of SS to DM ranged from 0 to 10%. Firstly, DMS was characterized by static light scattering, FTIR, ¹H-NMR, TGA and DSC. Then, its phase and coacervate behaviors were studied. Turbidity was utilized as an indicator for the coacervate formation. It was found that when the SS content was more than 4 mol%, DMS coacervate would be formed in deionized water at a certain concentration. Temperature and pH have no effect on the formation of DMS coacervate. Meanwhile, salts has a great influence on the DMS coacervation. Unlike the results of the other polyelectrolyte complexes, Na₂SO₄, Na₂HPO₄, NaCOOCH₃, sodium citrate and NaI cannot prevent the DMS coacervate formation. However, the addition of NaCl, NaNO₃, NaBr and NaSCN can prevent the coacervate formation. The influence cannot be described by Hofmeister-like behavior. Results of surface tension and fluorescence spectrum presented that the driving forces to formation of DMS coacervate are the electrostatic interaction and the intermolecular hydrophobic interaction.     

In-capillary solid-phase extraction-capillary electrophoresis for the determination of chlorophenols in water

A novel CE method combined with SPE in a single capillary was developed for analysis of chlorophenols in water. A frit of 0.5 mm was first made by a sol-gel method, followed by packing a SPE sorbent in the inlet end of the capillary. Two phenol derivatives, 2,4-dichlorophenol and 2,4,5-trichlorophenol, were used as the model compounds. By loading sample solutions into the capillary, the two chlorophenols were extracted into the sorbent. They were desorbed by injecting only about 4 nL of methanol. Finally, the analytes were separated by conventional CE. The technique provided a concentration enhancement factor of over 4000-fold for both chlorophenols. The detection limits (S/N = 3) of 2,4-dichlorophenol and 2,4,5-trichlorophenol were determined to be 0.1 ng/mL and 0.07 ng/mL, respectively. For replicate analyses of 5 ng/mL of 2,4-dichlorophenol, within-day and between-day RSDs of migration time, peak height and peak area were in the range of 1.8-2.0%, 4.0-4.4% and 4.1-4.6%, respectively. The method shows wide linear range, acceptable reproducibility and excellent sensitivity, and it was applied to the analyses of spiked river water samples. The capillary packed with the SPE sorbents can be used for more than 400 runs without performance deterioration.     

Liquid chromatographic determination of biogenic amines in fermented foods after derivatization with 3,5-dinitrobenzoyl chloride

The reagent 3,5-dinitrobenzoyl chloride (DNBZ-Cl) was tested for pre-column derivatization of biogenic amines (BAs). Samples were derivatized within 3 min in 1 M NaOH at ambient temperature by adding 2-propanole and 50 mM DNBZ-Cl in acetonitrile. The reaction was terminated by addition of 2 M HCl. For high-performance liquid chromatography an encapsulated stationary reversed-phase and gradient elution using a ternary gradient system were used. The DNBZ derivatives were quantified by their UV-absorption at 260 nm. The structures of the derivatives were elucidated using coupling of HPLC with electrospray ionization mass spectrometry. Detection limits of BAs were approximately 124-864 microg l(-1) (injected amounts 203-1410 pg) at a signal-to-noise ratio of 3:1. The coefficients of determination were 0.989-0.996, with the exceptions of cadaverine (0.976) and serotonin (0.965). The method was applied to the quantitative determination of agmatine, cadaverine, histamine, octopamine, 2-phenylethylamine, putrescine, serotonin, spermidine, spermine, tryptamine and tyramine, in fermented cabbage juices, soy sauces, Misos (soy pastes), fermented fish sauces, and anchovy paste.     

Single hollow fiber SLM extraction of polyamines followed by tosyl chloride derivatization and HPLC determination

Determination of polyamines in biological fluids possesses medical diagnostic relevance. Despite the vast panel of analytical methods developed for polyamines they are not applied in routine clinical usage, mainly due to the time and labor consuming sample preparation step and complicated derivatization procedures. Thus, new simpler methods are needed. This paper describes a single hollow fiber SLM extraction method of polyamines followed by simple pre-column derivatization with tosyl chloride and HPLC-UV analysis. The influence of different parameters such as the extraction time, organic phase composition, acceptor pH, donor pH, acceptor volume, donor volume and stirring speed on the transport parameters and enrichment was studied and discussed. The optimized method was applied to real matrices such as urine and plasma.     

Gas-chromatographic determination of trace amounts of vinyl chloride in water and air after derivatization to 1,2-dibromochloroethane

Summary A quantitative method for the determination of trace amounts of vinyl chloride in water and air is presented. Analysis of water is performed by stripping it with 250 ml/min helium from a 1-l sample at 20°C for 30 min to transfer the vinyl chloride into the gas phase. The vinyl chloride is concentrated on an ice-cooled adsorption tube, which is filled with 550 mg of silica gel and 300 mg of activated charcoal. Air samples are taken by drawing a known volume directly through the ice-cooled adsorption tube. The tubes are eluted with carbon disulfide and the vinyl chloride is derivatizised with bromine water to form 1,2-dibromochloroethane. The derivative is determined by capillary gas chromatography with an electron capture detector. The method was tested using water samples over a range from 0.4 ng/l to 1.25 g/l. The detection limits are 0.4 ng/l for 1-l water samples or 50 ng/m³ for 7.5 l air.     

Further study of individual ion activities in pure aqueous sodium chloride solution

The e.m.f. values between a chloride electrode and a reference electrode were measured in aqueous NaCl solutions between 10(-5) and 6 m, saturated KC1 and 1M KNO(3) bridges being used. The effect of the various liquid junctions is calculated and discussed. The consistency of the results is inspected, assuming either the MacInnes or the Guggenheim convention. The choice of different reference points for the standardization of the e.m.f.'s and for the activity coefficients is discussed. A comparison is made between the results obtained with an Ag/AgCl electrode of the second kind and a solid membrane chloride electrode.     

Titrimetric determination of thiocyanate and thiosulphate ions by oxidation with iodine in alkaline solution

Thiocyanate (2.7-90 mug) and thiosulphate (4.5-90 mug) ions are oxidized by iodine in alkaline media to sulphate ions. After acidification, the excess of iodine is extracted into chloroform, and the iodide ions formed in the redox reaction subjected to an amplification reaction. Either a titrimetric or a spectrophotometric finish may be used. Each thiocyanate and thiosulphate ion results in the ultimate production of 19 and 24 iodine molecules, respectively.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

High performance liquid chromatographic determination of N-nitrosoamines by pre-column fluorescence derivatization with acridone-N-acetyl chloride

A sensitive high performance liquid chromatographic method for the determination of N-nitrosoamines with pre-column fluorescence derivatization has been developed. N-nitrosoamines are first changed into secondary amines using denitrosation reagent, then react with acridone-N-acetyl chloride (ARC-Cl) to produce corresponding secondary amine derivatives, which exhibit a strong fluorescence. Maximum emission for ARC derivatives is 430 nm (lambda(ex) 404 nm). The labelled derivatives are very stable, less than 4% decomposition occurs after heating at 40 degrees C for 24 h. Fluorescence intensities of derivatives are higher in neutral and alkaline than in acidic solutions. This method, in conjunction with a multi-gradient program, offers a baseline resolution of the ARC derivatives from a linear acetonitrile gradient. Separation is carried out on a reverse phase C(18) column. Derivatization and chromatographic conditions are optimized. The relative standard deviation (n=6) at an analytical concentration of 10 pmol of each N-nitroamine is less than 4.5%. The detection limits at the fmol level. The method described is also suitable for analysis of other amino compounds in different biological samples.