太阳能光解水制氢的研究进展

本文概述了利用光催化技术催化分解水制氢的反应机理和研究进展。结合作者的最近研究,重点描述了TiO2及过渡金属氧化物,层状金属氧化物以及某些能利用可见光的光催化材料的结构和光催化特性,阐述了核课题的意义和今后的研究方向。     

Inorganic Photocatalysts for Overall Water Splitting

Photocatalytic water splitting using semiconductor photocatalysts has been considered as a “green” process for converting solar energy into hydrogen. The pioneering work on electrochemical photolysis of water at TiO₂ electrode, reported by Fujishima and Honda in 1972, ushered in the area of solar fuel. As the real ultimate solution for solar fuel‐generation, overall water splitting has attracted interest from researchers for some time, and a variety of inorganic photocatalysts have been developed to meet the challenge of this dream reaction. To date, high‐efficiency hydrogen production from pure water without the assistance of sacrificial reagents remains an open challenge. In this Focus Review, we aim to provide a whole picture of overall water splitting and give an outlook for future research.     

Carbon‐Electrode‐Tailored All‐Inorganic Perovskite Solar Cells To Harvest Solar and Water‐Vapor Energy

Moisture is the worst enemy for state‐of‐the‐art perovskite solar cells (PSCs). However, the flowing water vapor within nanoporous carbonaceous materials can create potentials. Therefore, it is a challenge to integrate water vapor and solar energies into a single PSC device. We demonstrate herein all‐inorganic cesium lead bromide (CsPbBr₃) solar cells tailored with carbon electrodes to simultaneously harvest solar and water‐vapor energy. Upon interfacial modification and plasma treatment, the bifunctional PSCs yield a maximum power conversion efficiency up to 9.43 % under one sun irradiation according to photoelectric conversion principle and a power output of 0.158 μW with voltage of 0.35 V and current of 0.45 μA in 80 % relative humidity through the flowing potentials at the carbon/water interface. The initial efficiency is only reduced by 2 % on exposing the inorganic PSC with 80 % humidity over 40 days. The successful realization of physical proof‐of‐concept multi‐energy integrated solar cells provides new opportunities of maximizing overall power output.     

Interfacial Engineering FeOOH/CoO Nanoneedle Array for Efficient Overall Water Splitting Driven by Solar Energy

Interface engineering has been applied as an effective strategy to boost the electrocatalytic performance because of the strong coupling and synergistic effects between individual components. Here, we engineered vertically aligned FeOOH/CoO nanoneedle array with a synergistic interface between FeOOH and CoO on Ni foam (NF) by a simple impregnation method. The synthesized FeOOH/CoO exhibits outstanding electrocatalytic activity and stability for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. For the overall water splitting, the bifunctional FeOOH/CoO nanoneedle catalyst requires only a cell voltage of 1.58 V to achieve a current density of 10 mA cm⁻², which is much lower than that required for IrO₂//Pt/C (1.68 V). The FeOOH/CoO catalyst has been successfully applied for solar cell-driven water electrolysis, revealing its great potential for commercial hydrogen production and solar energy storage.     

Enhanced Conversion Efficiency Enabled by Species Migration in Direct Solar Energy Storage

Solar energy can be stored via either an indirect route in which electricity is involved as an intermediate step, or a direct route that utilizes photogenerated charge carriers for direct solar energy conversion. In this study, we investigate the fundamental difference between the direct and indirect routes in solar energy conversion using a new photoelectrochemical energy storage cell (PESC) as a model device. This PESC centers on a liquid junction that utilizes CH₃NH₃PbI₃ perovskite to drive photoelectrochemical reactions of Benzoquinone (BQ) and Ferrocene (Fc) redox species. The experimental studies show that the equilibrium redox potentials are 0.1 V and −0.78 V (vs Ag/AgNO₃) for Fc⁺/Fc and BQ/BQ^.−, respectively, which would produce a theoretical open-circuit voltage of 0.88 V for the storage device. The physics-based computational analysis shows a relatively flat reaction rate distribution in the electrode for the indirect route; however, in the direct route the photoelectrochemical reaction rate is critically affected by electron concentration due to strong light absorption of the perovskite material, which has been shown to vary by at least 10-fold in the transverse direction across the photoelectrode. The drastic variation of reaction rate in the photoelectrode creates an electric field that is 7.5 times stronger than the bulk electrolyte, which causes the photo-converted reaction product (i. e., BQ^.−) to drift away from the photoelectrode thereby creating a constant reaction driving force. As a result, it has been shown that the intrinsic solar to chemical conversion (ISTC) efficiency improves by ∼40 % for the direct route compared to the indirect route at 0.05 mA/cm².     

Photocatalytic Conversion of CO(2) in Water over Layered Double Hydroxides

Have a bit of bubbly: Significant amounts of CO and O(2) gas are evolved in the photocatalytic conversion of CO(2) over layered double hydroxides (LDHs) in water. A simple mixture of the same metal hydroxides, which has the same constituent elements of the LDH, shows low activity for CO and O(2) evolution. Dissolved CO(2) gas was shown to be the source of carbon in the reaction over LDHs in water.     

太阳能转换过程中的高分子应用

近年来,在太阳能利用的科学领域内,高分子材料得到了广泛的应用。本文从太阳能工艺学和太阳能转换两个方面对此问题作了介绍和讨论。     

Integrated Photoelectrochemical Solar Energy Conversion and Organic Redox Flow Battery Devices

Building on regenerative photoelectrochemical solar cells and emerging electrochemical redox flow batteries (RFBs), more efficient, scalable, compact, and cost‐effective hybrid energy conversion and storage devices could be realized. An integrated photoelectrochemical solar energy conversion and electrochemical storage device is developed by integrating regenerative silicon solar cells and 9,10‐anthraquinone‐2,7‐disulfonic acid (AQDS)/1,2‐benzoquinone‐3,5‐disulfonic acid (BQDS) RFBs. The device can be directly charged by solar light without external bias, and discharged like normal RFBs with an energy storage density of 1.15 Wh L^?1 and a solar‐to‐output electricity efficiency (SOEE) of 1.7 % over many cycles. The concept exploits a previously undeveloped design connecting two major energy technologies and promises a general approach for storing solar energy electrochemically with high theoretical storage capacity and efficiency.     

太阳能光催化制氢研究进展

由于化石燃料本身的不可持续性,以及燃烧化石燃料释放的大量CO₂ 产生的温室效应、环境污染等严重的全球性问题,构建洁净的、环境友好的、非化石燃料的、可再生新能源体系,已经成为世界各国高度关注的焦点和重大战略。太阳能由于其取之不竭、洁净无污染、可再生等优点,必将在未来的新能源开发中占据举足轻重的地位。而氢能具有高燃烧值、燃烧产物是水因此无环境污染等优点,因此,利用自然界丰富的太阳能光催化制氢作为可持续发展的新能源途径之一,正日益受到国际社会的高度关注。本文简要综述了近年来这一研究领域的一些重要进展,总结了本课题组在半导体光催化制氢研究方面所取得的最新结果,并对太阳能光催化制氢的未来发展进行展望。     

Hot‐Electron‐Transfer Enhancement for the Efficient Energy Conversion of Visible Light

Great strides have been made in enhancing solar energy conversion by utilizing plasmonic nanostructures in semiconductors. However, current generation with plasmonic nanostructures is still somewhat inefficient owing to the ultrafast decay of plasmon‐induced hot electrons. It is now shown that the ultrafast decay of hot electrons across Au nanoparticles can be significantly reduced by strong coupling with CdS quantum dots and by a Schottky junction with perovskite SrTiO₃ nanoparticles. The designed plasmonic nanostructure with three distinct components enables a hot‐electron‐assisted energy cascade for electron transfer, CdS→Au→SrTiO₃, as demonstrated by steady‐state and time‐resolved photoluminescence spectroscopy. Consequently, hot‐electron transfer enabled the efficient production of H₂ from water as well as significant electron harvesting under irradiation with visible light of various wavelengths. These findings provide a new approach for overcoming the low efficiency that is typically associated with plasmonic nanostructures.     

Integration of Semiconducting Sulfides for Full‐Spectrum Solar Energy Absorption and Efficient Charge Separation

The full harvest of solar energy by semiconductors requires a material that simultaneously absorbs across the whole solar spectrum and collects photogenerated electrons and holes separately. The stepwise integration of three semiconducting sulfides, namely ZnS, CdS, and Cu_2?xS, into a single nanocrystal, led to a unique ternary multi‐node sheath ZnS–CdS–Cu_2?xS heteronanorod for full‐spectrum solar energy absorption. Localized surface plasmon resonance (LSPR) in the nonstoichiometric copper sulfide nanostructures enables effective NIR absorption. More significantly, the construction of pn heterojunctions between Cu_2?xS and CdS leads to staggered gaps, as confirmed by first‐principles simulations. This band alignment causes effective electron–hole separation in the ternary system and hence enables efficient solar energy conversion.     

太阳能光催化分解水制氢※

利用太阳能光催化分解水制氢是解决能源环境问题并实现太阳能有效转化和储存最有前途的技术之一, 这一“圣杯”式反应经过几十年不懈努力取得了诸多重要研究进展. 本文将综述光催化分解水制氢体系的基本概念、活性测试方法与注意事项、光催化材料种类等; 并从光催化分解水制氢的光吸收、光生电荷分离和表面催化反应等基本过程和关键科学问题的角度总结其重要研究进展, 最后对于太阳能光催化分解水制氢的挑战和潜在的发展方向进行分析和展望. 希望通过本综述的简要介绍能让刚从事光催化分解水制氢研究的青年科技人员清晰地了解掌握该领域的一些基本概念、操作规范、研究总体进展和现状等.     

二氧化钛纳米材料及其能源应用

简要介绍了二氧化钛纳米材料的合成、性质、改性及其在能源方面的应用.其中合成方法包括溶胶凝胶、水/溶剂热、氧化、沉积和超声/微波助合成法:性质包括结构和热力学以及电学和光学性质;改性包括掺杂和敏化;应用包括光催化、光伏打和光解水.     

Harvesting Solar Light with Crystalline Carbon Nitrides for Efficient Photocatalytic Hydrogen Evolution

Described herein is the photocatalytic hydrogen evolution using crystalline carbon nitrides (CNs) obtained by supramolecular aggregation followed by ionic melt polycondensation (IMP) using melamine and 2,4,6‐triaminopyrimidine as a dopant. The solid state NMR spectrum of ¹⁵N‐enriched CN confirms the triazine as a building unit. Controlling the amount and arrangements of dopants in the CN structure can dramatically enhance the photocatalytic performance for H₂ evolution. The polytriazine imide (PTI) exhibits the apparent quantum efficiency (AQE) of 15 % at 400 nm. This method successfully enables a substantial amount of visible light to be harvested for H₂ evolution, and provides a promising route for the rational design of a variety of highly active crystalline CN photocatalysts.     

The Application of Graphene and Its Derivatives to Energy Conversion,Storage, and Environmental and Biosensing Devices

Graphene (GR) and its derivatives are promising materials on the horizon of nanotechnology and material science and have attracted a tremendous amount of research interest in recent years. The unique atom‐thick 2D structure with sp² hybridization and large specific surface area, high thermal conductivity, superior electron mobility, and chemical stability have made GR and its derivatives extremely attractive components for composite materials for solar energy conversion, energy storage, environmental purification, and biosensor applications. This review gives a brief introduction of GR's unique structure, band structure engineering, physical and chemical properties, and recent energy‐related progress of GR‐based materials in the fields of energy conversion (e.g., photocatalysis, photoelectrochemical water splitting, CO₂ reduction, dye‐sensitized and organic solar cells, and photosensitizers in photovoltaic devices) and energy storage (batteries, fuel cells, and supercapacitors). The vast coverage of advancements in environmental applications of GR‐based materials for photocatalytic degradation of organic pollutants, gas sensing, and removal of heavy‐metal ions is presented. Additionally, the use of graphene composites in the biosensing field is discussed. We conclude the review with remarks on the challenges, prospects, and further development of GR‐based materials in the exciting fields of energy, environment, and bioscience.     

Coupling of Solar Energy and Thermal Energy for Carbon Dioxide Reduction: Status and Prospects

Enormous efforts have been devoted to the reduction of carbon dioxide (CO₂) by utilizing various driving forces, such as heat, electricity, and radiation. However, the efficient reduction of CO₂ is still challenging because of sluggish kinetics. Recent pioneering studies from several groups, including us, have demonstrated that the coupling of solar energy and thermal energy offers a novel and promising strategy to promote the activity and/or manipulate selectivity in CO₂ reduction. Herein, we clarify the definition and principles of coupling solar energy and thermal energy, and comprehensively review the status and prospects of CO₂ reduction by coupling solar energy and thermal energy. Catalyst design, reactor configuration, photo‐mediated activity/selectivity, and mechanism studies in photo‐thermo CO₂ reduction will be emphasized. The aim of this Review is to promote understanding towards CO₂ activation and provide guidelines for the design of new catalysts for the efficient reduction of CO₂.     

能源转换演示装置的设计

针对高中化学教材中提到的新能源问题,探索设计了可将太阳能转化为电能,电能转化为化学能,化学能转化为电能,电能转化为热能的能源转换演示装置。通过该实验的演示,可以让学生直观地感受到几种能量之间的转化过程,可供教学参考和借鉴。     

From Solar Energy to Fuels: Recent Advances in Light‐Driven C1 Chemistry

Catalytic C₁ chemistry based on the activation/conversion of synthesis gas (CO+H₂), methane, carbon dioxide, and methanol offers great potential for the sustainable development of hydrocarbon fuels to replace oil, coal, and natural gas. Traditional thermal catalytic processes used for C₁ transformations require high temperatures and pressures, thereby carrying a significant carbon footprint. In comparison, solar‐driven C₁ catalysis offers a greener and more sustainable pathway for manufacturing fuels and other commodity chemicals, although conversion efficiencies are currently too low to justify industry investment. In this Review, we highlight recent advances and milestones in light‐driven C₁ chemistry, including solar Fischer–Tropsch synthesis, the water‐gas‐shift reaction, CO₂ hydrogenation, as well as methane and methanol conversion reactions. Particular emphasis is placed on the rational design of catalysts, structure–reactivity relationships, as well as reaction mechanisms. Strategies for scaling up solar‐driven C₁ processes are also discussed.