火焰原子吸收光谱法测定锡阳极泥中铜的含量

建立了火焰原子吸收光谱法测定锡阳极泥中铜元素的分析方法。对锡阳极泥样品,采用盐酸、硝酸、高氯酸分解,氢溴酸挥发除去锡和锑的溶样方式,火焰原子吸收光谱仪测定铜,测定范围为1%～5%,并考察了仪器条件、不同酸浓度、干扰元素对铜含量测定的影响。实验结果表明铜的检出限为0.013μg/mL,加标回收率为95.5%～104%,相对标准偏差为0.81%～2.1%,方法准确度高、精密度好,能够很好地满足锡阳极泥中铜元素的测定。     

电感耦合等离子体质谱法同时测定矿泉水中痕量溴和碘

建立了电感耦合等离子体质谱法(ICP-MS)同时测定矿泉水中痕量溴、碘,比较了不同酸碱度对溴、碘测定的影响。测量过程中对溴、碘的记忆效应进行消除,选择了最佳的工作条件,溴、碘的方法检出限分别为0.63,0.112μg/L,相对标准偏差分别为3.1%和1.8%,加标回收率为96%～107%。对国家标准水样进行了测定,测定结果与推荐值一致性较好。     

火焰原子吸收光谱法测定铜冶炼烟尘中铋

本文研究了测定铜冶炼烟尘中铋含量0.050% ~5.00%的火焰原子吸收光谱法。对铜冶炼烟尘试样的溶解、测定体系中酸介质的影响和各干扰元素进行了试验研究。制定了铜冶炼烟尘中铋含量的原子吸收光谱法。方法标准偏差为0.0013 %~ 0.057 %,相对标准偏差为0.78 % ~1.44 %,样品加标回收率为98.95%~101.87%。本方法具有灵敏度高、结果准确、操作简便等特点,适合铜冶炼烟尘中铋含量0.050 % ~ 5.00 % 的测定。     

高频红外碳硫仪快速测定镍基高温合金中碳、硫

建立了高频红外碳硫仪快速测定镍基高温合金中碳、硫的方法。通过对样品称样量、助熔剂的选择及加入量等方面考察,确定了镍基高温合金样品的最佳测定条件。结果表明,称取样品、钨锡助熔剂各1.0 g左右时,测定效果最佳,碳和硫的方法检出限分别为0.000 11%、0.000 03%,方法测定下限分别为0.000 44%、0.000 12%,测定值的相对标准偏差为0.51%～2.38%(n=6),相对误差均小于5%。该方法适合于镍基高温合金中碳、硫含量的测定。     

分光光度法测定工业水中的酚酞碱度

建立了分光光度法测定工业及锅炉用水中酚酞碱度的分析方法。以间硝基苯酚为显色剂,采用分光光度法,测定了吸光度与酚酞碱度之间的线性关系。对测定波长、显色剂用量、显色时间等条件进行优化选择,考察了该方法的准确度和精密度。方法检出限为0.004 5 mmol/L,测定结果的相对标准偏差为0.20%～0.70%(n=9),加标回收率为97.0%～99.0%。该方法检出限低,精密度高,受样品颜色,浑浊度等的影响小,适合工业及锅炉用水酚酞碱度的测定,尤其适用于低酚酞碱度水样。     

电感耦合等离子体原子发射光谱(ICP-AES)法测定真空精炼镁合金物料中铁、铜、镍

真空精炼是目前镁金属提纯的重要工艺,工艺原料及真空精炼提纯镁金属过程残留物中Fe、Cu、Ni含量的准确测定对工艺参数的优化及调整具有重要的指导作用。传统测定方法中以邻二氮杂菲分光光度法、新亚铜灵分光光度法、丁二酮肟分光光度法测定三种元素含量,结果准确,但操作繁琐,周期较长,难以满足工业生产中高效、快速测定的需要,且方法中所需的有机萃取剂对环境污染较大。本研究选择电感耦合等离子体发射光谱法(ICP-AES)测定真空蒸馏精炼镁合金物料中Fe、Cu、Ni,系统探究了溶解酸、溶解温度、溶解时间对物料溶解和测定的影响,选择了(1+1)盐酸和过氧化氢溶解体系,200℃加热条件下反应20min为最佳消解镁合金原料条件;选择了王水溶解体系,200℃加热条件下反应25min为真空精炼残留物最佳溶解条件。并探讨了ICP-AES测定过程中各元素的检出限和测定下限以及共存元素的干扰情况,建立了ICP-AES测定真空精炼提纯镁合金物料的方法。方法测定结果的相对标准偏差(RSD,n=11)为Fe 5.89%～11.49%、Cu 2.58%～11.78%、Ni 3.36%～11.47%;各元素加标回收率为;Fe 96.35%～102%、Cu 101.3%～108%、Ni 103%～104.7%;按照实验方法测定镁合金原料、真空精炼残留物中的铁、铜、镍,并与国标方法测定结果进行对比,结果相一致。本研究实现了ICP-AES法快速、准确测定真空蒸馏精炼镁合金物料中铁、铜、镍含量,对及时、高效、准确评估真空精炼提纯镁工艺及产品具有重要意义。     

微波消解氢化物发生-原子荧光光谱法测定罐头食品中汞和锡

建立了一种微波消解、氢化物发生-原子荧光光谱法同时测定罐头食品中汞和锡的方法。研究了测定汞、锡时介质的酸度和硼氢化钾的用量对汞、锡测定的影响。优化了样品消解和测定的条件,采用硫脲-抗坏血酸为掩蔽剂,以酒石酸为载流,消除了影响锡测定的干扰因素。汞和锡的检出限、相对标准偏差、回收率分别为:0.005μg.L-1和0.20μg.L-1;5.0%~6.5%和4.0%~7.3%;93.0%~101.0%和92.5%~94.0%。     

溴酸钾滴定法测定铜冶炼烟尘中的砷含量

研究了测定铜冶炼烟尘中砷含量的溴酸钾滴定方法。对测定体系中的各共存元素进行研究,探讨了测定方法的各项测定条件,方法的相对标准偏差RSD为0.13%～0.61%,样品加标回收率在99.5%～100%,方法精密度高,准确度好,适用于铜冶炼烟尘中砷含量为1.00%～50.00%的测定。     

电感耦合等离子体原子发射光谱法测定稀土钢中微量镧、铈

采用稀王水溶解样品,选择La408.672 nm、Ce456.236nm为分析线,建立了电感耦合等离子体原子发射光谱法(ICP-OES)测定稀土钢中微量镧、铈的方法。结果表明,各元素校准曲线线性良好,相关系数可达0.99999;方法测定范围为：0.0001%～0.10%。检出限为：镧0.00002%,铈0.00006%。按照实验方法测定标样中镧、铈,结果的相对标准偏差RSD(n=8)为2.18%、1.68%。     

顶空毛细管气相色谱法测定茶多酚中有机溶剂的残留量

建立了顶空毛细管气相色谱法测定茶多酚中正己烷、氯仿、乙酸乙酯和丙酮4种有机溶剂残留量的方法.并讨论了平衡温度、平衡时间、盐效应对测定的影响.分析结果表明:该方法对上述4种有机溶剂均达到了完全分离,相关系数为0.994～0.999,检出限范围为0.065～0.268 μg/g,测定结果的相对标准偏差为0.39%～2.13%,样品的回收率为90.9%～105.3%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.