Iodometric determination of aryldialkylamine-N-oxides

A simple, rapid and selective titrimetric procedure for the determination of 0.1–20 mg of aryldialkylamine has been developed. The method is based on the reduction of the aryldialkylamine oxides with iodide in acidic medium. The rate of reaction is accelerated by heating the reactants just to boiling, and after cooling the reaction products, the liberated iodine is titrated with thiosulphate solution, with starch as indicator. The method can be applied successfully to the determination of aryldialkylamine oxides in the presence of aliphatic and aromatic amine oxides and amines.Dedicated to the memory of the late Dr. Darwish Amin     

Spectrophotometric determination of maneb by ternary complex formation with PAR and CTAB

A rapid, simple, direct, and sensitive method has been developed for the determination of maneb (manganese ethylenebisdithiocarbamate) based on the formation of manganese-4-(2′-pyridylazo) resorcinol complex by a ligand displacement reaction, which is rendered water soluble by a cationic surfactant cetyltrimethylammonium bromide (CTAB) by the formation of an ion association complex. Beer's law is obeyed over the concentration range 0.08–2.4 μg/ml of the final solution at 500 nm in pH range 8–12. The molar absorptivity and Sandell's sensitivity are calculated to be 8.84 × 10⁴ l.mol⁻¹.cm⁻¹ and 0.003 μg/cm², respectively. The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixture, grain samples and vegetables.     

Sensitive determination of aliphatic amines in water by high-performance liquid chromatography with chemiluminescence detection

A sensitive method has been developed for liquid chromatographic determination of short aliphatic amines in water samples. Analytes are preconcentrated and dansylated on solid sorbents (C18 solid-phase extraction cartridges). The dansyl derivatives are chromatographed and post-column mixed with peroxyoxalate (TCPO) and H2O2 in order to perform chemiluminescence detection. Optimal results have been obtained using a sample volume of 5 ml. The method has been applied to the quantification or screening of several aliphatic amines: methylamine, ethylamine, butylamine, diethylamine, pentylamine and hexylamine. The screening procedure has been developed including also polyamines (putrescine, cadaverine, spermidine and spermine). The results obtained by using chemiluminescence (CL) detection have been compared with other detection systems (fluorescence and UV). The sensitivity can increase from 3 to 75 times respect UV detection and from 2 to 10 times respect fluorescence detection depending on the amine. The detection limits achieved were between 0.15 and 0.9 microg/l.     

8-Phenyl-(4-oxy-acetic acid N-hydroxysuccinimidyl ester)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene as a new highly fluorescent-derivatizing reagent for aliphatic amines in disease-related samples with high-performance liquid chromatography

A novel fluorescent-activated ester, 8-phenyl-(4-oxy-acetic acid N-hydroxysuccinimidyl ester)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (TMPAB-OSu) has been designed and synthesized for amine labeling in HPLC. Being used 11 aliphatic amines as the models, the derivatization conditions were optimized. In 0.2 mol/l borate buffer (pH 8.8), amines reacted with TMPAB-OSu at 30 °C to form the derivatives in 10 min. The fluorescent quantum yield of TMPAB-OSu and its amine derivatives are high even compared with fluorescein. The separation of these amine derivatives was achieved with a C₈ column and gradient elution by using 0.1 mol/l sodium acetate buffer (pH 5.0) and methanol. With fluorescence detection at an emission wavelength of 509 nm and an excitation wavelength of 497 nm, the detection limits of aliphatic amines were 2–18 fmol, at a signal-to-noise ratio of 3:1. The proposed TMPAB-OSu-based HPLC method has been applied to the analysis of urine samples of health, hepatic and renal patients and lake water. Recoveries from different matrices are from 96 to 104%, depending on the sample investigated.     

Extraction and spectrophotometric determination of trace amount of Pd(II) with 2,2'-dithiodianiline

A method for the extraction-spectrophotometric determination of palladium with 2,2′-dithiodianilline (DTDA) is described. DTDA–Pd(II) complex is extracted from an aqueous solution with pH 3 into isobutyl methyl ketone (IBMK) layer. The absorbance is measured at 397 nm and the molar absorptivity found to be 1.47×10⁶ l mol⁻¹ cm⁻¹. The complex system conforms to Beer's law over the range 0.3–220 ng ml⁻¹ palladium (II). The effect of pH (1–6), NaClO₄ concentration, DTDA concentration and shaking time were studied. The ratio of the metal ion to ligand molecules in the complex and its stability constant were found to be 1:1 and 1.45×10⁶, respectively. The tolerance limit for many cations and anions have been determined. Finally the method has been applied successfully to the determination of palladium in synthetic mixtures, alloy and catalyst samples.     

Spectrophotometric determination of beryllium with carminic acid

Summary A new reagent has been proposed for the determination of beryllium. The method is based on the reaction between beryllium and carminic acid, forming a Be-carminic acid complex at pH 4. The absorption is measured at 580 nm. The molar absorptivity is 2.25×10³ mol^–1 cm^–1. Beer's law is obeyed from 0.4 ppm to 1.6 ppm of beryllium. The effects of pH, reagent concentration and interferences from foreign ions have been studied. The method has been applied to the determination of beryllium in polluted water and blood samples.

---

Spektralphotometrische Bestimmung von Beryllium mit CarminsÄure

     

Synthesis and properties of 1,2,2,6,6-pentamethyl-3,5-dimethylene-4-piperidone

1,2,2,6,6-Pentamethyl-3,5-dimethylene-4-piperidone was synthesized, whereas analogous compounds in the 4-piperidone series could not be isolated. An unusual reaction of the compound obtained with primary aliphatic amines, consisting of successive addition of the amine at the C=C bonds, with a possible formation of an intermediate bicyclic adduct and further elimination of methylamine, was detected.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 937–942, July, 1984.     

A novel method for the spectrophotometric determination of nitrite in water

A rapid, simple, selective and sensitive method for the spectrophotometric determination of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. Nitrite reacts with barbituric acid in acidic solution to give the nitroso derivative, violuric acid. At analytical wavelength of 310 nm, Beer's law is obeyed over the concentration range 0.00–3.22 ppm of nitrite. The molar absorptivity is 15330 ± 259.7 (95%) with pooled standard deviation of 355.57 and R.S.D. of 2.32%. As well as the method is sensitive (2.99 × 10⁻³ μg NO₂ cm⁻²) and selective, it tolerates most of the potential interferents. It has been successfully applied to nitrite determination in natural waters by use of a calibration graph with determination limit of 1.66 μg NO₂ in 100 mL working solution corresponding to minimum 9.5 ppb NO₂–N in water samples. Lower concentrations of nitrite (3.0 μg NO₂/L sample) is precisely analyzed by using the method of dilution with sample, with R.S.D. of lower than 0.5%. The results were compared with standard N-(1-naphtyl)ethylenediamine dihydrochloride method and very good agreement between the data was observed. The method can easily be applied in the field.     

Rapid fluorimetric assay for primary amine groups in water samples

Bond Elut C₁₈ solid-phase extraction cartridges were used for pre-concentration followed by derivatization with o-phthaldialdehyde-N-acetylcysteine (OPA-NAC) of primary amines in water. Optimal conditions were: conditioning the cartridges with borate buffer pH 10.4, retention of the primary amines, addition of the OPA-NAC(3.7 mmol L^–1) 1:1 molar ratio and borate buffer pH 8, elution of the isoindol with MeOH-borate buffer (9:1) pH 10.2 and fluorescence measurement. The equations of the calibration graphs for methylamine, ethylamine, propylamine, butylamine, pentylamine, and -phenylethylamine at _excitation=330 nm and _emission=440 nm, in the optimal conditions are presented. The solid-phase extraction procedure improved ten times the detection limits of the solution derivatization. Those values are in the 0.01–0.06 mg L^–1 interval in function of the amine. Also, it is possible to estimate the total primary aliphatic amine concentration in water, expressed as molar concentration of –NH₂ group or –NH₂-N mg L^–1. On the basis of these studies, the method was applied for the determination of primary amino groups in tap, ground, factory and source water samples.     

Capillary electrophoresis of organic cations at high salt concentrations

At concentrations of 100 mM or higher the chemical nature of both the cation and anion in the background electrolyte (BGE) can be varied to manipulate the migration times of protonated aniline cations. Significant differences were noted with Li+, Na+ and K+ for capillary electrophoretic runs carried out at pH 3. However, much greater differences in migration times were observed at acidic pH values when the BGE contained protonated cations of aliphatic amines. Analyte migration became progressively slower in the series: methylamine, diethylamine, diethylamino ethanol and triethylamine. A major part of this effect was attributed to an opposing electroosmotic flow (EOF) resulting from a positively-charged coating of the capillary surface with the amine cations in the BGE via a dynamic equilibrium. The amine cations also interact in solution with the analyte ions to reduce their electrophoretic mobilities. Migration times of anilines could be varied systematically over a broad range according to the BGE amine cation selected. Excellent separations of seven closely-related anilines were obtained with the new system.     

Extraction and sensitive spectrophotometric determination of ytterbium with 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol

The operating conditions for the absorptiometric determination of Yb(III) with the reagent 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol (3,5-diClDMPAP) by a liquid—liquid extraction technique are presented. The complex yields a molar absorptivity of 1.54 × 10⁵l.mole⁻¹.cm⁻¹ (λ_max = 588 nm) and an optimum concentration range of 0.025–1.360n mg/l., at pH = 10. The method developed has been applied to the determination of Yb(III) in synthetic and concrete mixtures.     

Spectrophotometric determination of aliphatic primary and secondary amines by reaction with p-benzoquinone

A simple, sensitive and selective spectrophotometric method has been developed for determination of aliphatic primary and secondary amines. It is based on a reaction with excess of p-benzoquinone in ethanol whereby 1:1 (amine:quinone) coloured products are obtained, which have maximum absorption at 510 nm and E(1cm)(1%) in the range 400-650. The effect of solvent, temperature, concentration of quinone and the presence of water have been kinetically investigated by the initial rate method. The conditions for monitoring amine concentrations as low as 0.1 microg/ml are optimized in the light of the kinetic data. Results with an average recovery of 98.5% and mean standard deviation of 1.9% are obtained with 9 different amines without interference from tertiary amines, ammonia, amides, imides, anilides, hydrazines and alpha-amino-acids.     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.     

Studies on vanadium(IV) complexes of azoxine s dyes

Comparative studies of the reaction of 7-arylazo-8-hydroxyquinoline-5-sulphonic acid (Azoxine S) dyes with vanadium(IV), show that 2:1 yellow, water-soluble complexes are formed over the pH range 2.5–6, and that the phenyl derivative is the most suitable for spectrophotometric determination of 0.2–1.4 ppm of vanadium(IV). The colour is formed instantaneously and is stable for about 8 hr. The molar absorptivity at λ_max, 400 mμ;, is 1.15 × 10⁴, and the equilibrium constant for complex formation is of the order of 10². These dyes can also be used as indicators in the direct complexometric determination of vanadium(IV). The interference of a number of anions and cations is reported.     

Determination of aliphatic amines by gas chromatography–mass spectrometry after in-syringe derivatization with pentafluorobenzoyl chloride

A simple and highly sensitive gas chromatographic method has been developed for the determination of low molecular weight short-chain aliphatic amines (SCAAs) after their simultaneous extraction and in-syringe derivatization with pentafluorobenzoyl chloride (PFBOC). Derivatization of the low molecular weight aliphatic amines in bicarbonate buffer of pH 10.5 with PFBOC was followed by immersed solvent microextraction. Derivatization conditions, including reagent concentration, reaction pH, ionic concentration of buffer, reaction time, stirring rate, reaction temperature and extraction solvent, have been investigated for method optimization. Linearity was studied within range of 0.15 pg ml⁻¹–50 ng ml⁻¹. The correlation coefficients were between 0.9934 and 0.9999. Detection limit of derivatized amines proved to be in the range of 0.117–1.527 pg ml⁻¹, and the intraday and interday relative standard deviation (RSD) values were less than 8% with respect to peak area. The method was applied for analysis of lake, river and industrial waste water. The recoveries of extraction from lake, river and industrial waste water samples, which have been spiked with different levels of aliphatic amines, were in the range of 68–99%, 63–102% and 62–105%, respectively.     

Sensitive spectrophotometric determination of traces of zirconium with 2-(6-bromo-2-benzothiazolylazo)-5-diethylaminophenol in the presence of sodium lauryl sulphate

A simple and highly sensitive procedure for spectrophotometric determination of zirconium has been developed. At pH 4.6, zirconium reacts with 2-(6-bromo-2-benzothiazolylazo)-5-diethylaminophenol in the presence of sodium lauryl sulphate to form a red-violet complex, which has an absorption maximum at 520 nm. The molar absorptivity at 520 nm is 4.4 × 10⁵ 1.mole⁻¹ .cm⁻¹. Beer's law is obeyed for 0.25–1.50 μg of zirconium in 25 ml of solution. The method has been used in the determination of zirconium in aluminium alloy and steel samples.     

Influence of the Solution Acidity and pK a of the Amine on the Reaction of Dextran Polyaldehyde with Amines

The influence exerted by the solution pH and pK _a of the amine on the reaction of dextran polyaldehyde with aromatic and aliphatic amines was studied.     

Determination of low molecular weight aliphatic primary amines in urine as their benzenesulphonyl derivatives by gas chromatography with flame photometric detection.

A selective and sensitive method for the determination of low molecular weight aliphatic primary amines in urine is described. These amines were converted into their benzenesulphonyl derivatives by a modified Hinsberg procedure, and measured by gas chromatography with flame photometric detection (FPD-GC) using a DB-1 capillary column. The derivatives were very stable and provided excellent FPD responses. By FPD-GC, linear calibration curves were obtained in the range 10-200 ng of methylamine, ethylamine, n-propylamine, isobutylamine and n-butylamine using tert-butylamine as an internal standard, and the detection limits of these amines were ca. 6-25 pg as the injection amount. Benzenesulphonamide derived from ammonia was converted into its N-dimethylaminomethylene derivative which has a longer retention time, and separated from benzenesulphonyl derivatives of low molecular weight primary amines on the chromatogram. The recoveries of aliphatic primary amines added to urine samples were 91-107% and the relative standard deviations were 0.2-4.5%. Analytical results of aliphatic primary amine contents in urine samples of normal subjects are presented.     

A new spectrophotometric method for the determination of primary aromatic amines

A new spectrophotometric method for the assay of primary aromatic amines with metol-chromium(VI) reagent has been developed. The method is simple, reproducible and accurate within +/- 1.0%. It has been extended to the determination of drugs (in pure samples and pharmaceutical preparations) which either contain a free primary aromatic amine or release it through hydrolysis or reduction. The method is also applicable to the assay of p-aminobenzenesulphonamides in rat urine and blood. All the sulphonamide derivatives tested, as well as other aniline derivatives with an electron-withdrawing group in the para-position, afford nearly the same molar absorptivity. Depending on the absorptivity, 0.3-2 mumole of amine will give an absorbance of approximately 0.1.     

Liquid chromatographic determination of aliphatic amines in water using solid support assisted derivatization with 9-fluorenylmethyl chloroformate

Summary A simple and sensitive method has been developed for the liquid chromatographic determination of short-chain aliphatic amines in water. Analytes are retained in solid-phase extraction (SPE) cartridges, and then derivatized by drawing an aliquot of the fluorogeneic reagent 9-fluorenylmethyl chloroformate (FMOC) through the cartridges. After a certain reaction time the derivatives formed are desorbed with acetonitrile. The collected extracts are then chromatographed on a LiChrospher 100 RP₁₈ 125 mm×4 mm i.d., 5 μm, column using an acetonitrile-water gradient. The influence of experimental conditions (SPE material, volume of sample, concentration of FMOC, time of reaction and pH) has been investigated. Optimal results have been obtained with C₁₈ SPE cartridges using a sample volume of 5.0 mL. For derivatization, 0.25 mL aliquots of 25 mM FMOC have been used, the reaction time being only 2 min. The method has been applied to the quantification of several aliphatic amines: methylamine, ethylamine, dimethylamine,n-butylamine,n-pentylamine andn-hexylamine. Under the proposed conditions the percentages of analytes retained plus derivatized were of about 54–107% compared to those obtained with direct solution derivatization. The method provided good reproducibility, linearity and accuracy within the 0.050–1.0 mg L⁻¹ concentration range. The limits of detection were in the 0.25–5.0 μg L⁻¹ range. The utility of the described approach has been tested by analysing tap water, river water and industrial waste water.