Surface modification of poly(dimethylsiloxane) with a perfluorinated alkoxysilane for selectivity toward fluorous tagged peptides

Poly(dimethylsiloxane) (PDMS) and similar polymers have proved to be of widespread interest for use in microfluidic and similar microanalytical devices. Surface modification of PDMS is required to extend the range of applications for devices made of this polymer, however. Here we report on the grafting of perfluorooctyltriethoxysilane via hydrolysis onto an oxidized PDMS substrate in order to form a fluorinated microchannel. Such a fluorinated device could be used for separating fluorous tagged proteins or peptides, similar to that which has been recently demonstrated in a capillary electrophoresis system or in an open tubular capillary column. The modified polymer is characterized using chemical force titrations, contact angle measurements, and X-ray photoelectron spectroscopy (XPS). We also report on a novel means of performing electroosmotic measurements on this material to determine the surface zeta potential. As might be expected, contact angle and chemical force titration measurements indicate the fluorinated surface to be highly hydrophobic. XPS indicates that fluorocarbon groups segregate to the surface of the polymer over a period of days following the initial surface modification, presumably driven by a lower surface free energy. One of the most interesting results is the zeta potential measurements, which show that significant surface charge can be maintained across a wide range of pH on this modified polymer, sufficient to promote electroosmotic flow in a microfluidic chip. Matrix-assisted time-of-flight mass spectrometry (MALDI-TOF MS) measurements show that a fluorous-tagged peptide will selectively adsorb on the fluorinated PDMS in aqueous solution, demonstrating that the fluorinated polymer could be used in devices designed for the enrichment or enhanced detection of fluorous-labeled proteins and peptides.     

PMMA人工晶状体表面的CF4/O2等离子体修饰

为了改善聚甲基丙烯酸甲酯(PMMA)人工晶状体的生物相容性和透光性, 采用CF4/O2等离子体技术修饰其表面. 通过衰减全反射红外光谱(ATR-FTIR)、X射线光电子能谱(XPS)、静态接触角(CA)测定、扫描电子显微镜(SEM)、紫外-可见近红外光谱(UV-Vis)等方法进行表征, 结果表明, 经CF4/O2等离子体处理后, PMMA表面的含氟和含氧基团增加, 其表面的亲水性增强, 生物相容性改善, 紫外光的隔离效率增大. 因此, 通过CF4/O2等离子体修饰能够有效地改善PMMA人工晶状体的性质.     

低能量链端对聚苯乙烯薄膜铺展和润湿行为的影响

通过低能量功能端基的表面富集作用,研究了聚苯乙烯（ＰＳ）薄膜在聚甲基丙烯酸甲酯（ＰＭＭＡ）表面上的铺展和润湿动力学．用光学显微镜跟踪了ＰＳ薄膜的润湿行为,并对高分子熔体膜中非连续部分尺寸的增大速率进行了测定．分别用ＸＰＳ和ＡＦＭ对ＰＳ薄膜的表面组成和ＰＳ液滴的平衡接触角进行了测定．发现具有低表面能的氟碳端基在薄膜表面富集使ＰＳ薄膜的表面张力下降,并使ＰＳ液滴在ＰＭＭＡ表面上的平衡接触角减小,从而使高分子熔体膜中非连续部分尺寸的增长速率下降,得到了与液液界面铺展和润湿理论一致的实验结果．     

Effect of Electrolyte Concentration on the Stern Layer Thickness at a Charged Interface

The chemistry and physics of charged interfaces is regulated by the structure of the electrical double layer (EDL). Herein we quantify the average thickness of the Stern layer at the silica (SiO₂) nanoparticle/aqueous electrolyte interface as a function of NaCl concentration following direct measurement of the nanoparticles’ surface potential by X‐ray photoelectron spectroscopy (XPS). We find the Stern layer compresses (becomes thinner) as the electrolyte concentration is increased. This finding provides a simple and intuitive picture of the EDL that explains the concurrent increase in surface charge density, but decrease in surface and zeta potentials, as the electrolyte concentration is increased.     

Contact angle hysteresis of microbead suspensions

Microbead suspensions are often used in microfluidic devices for transporting biomolecules. An experimental investigation on the wettability of microbead suspension is presented in this study. The variation in the surface tension and the equilibrium contact angle with the change in the volume fraction of the microbead is presented here. The surface tension of the microbead suspension is measured with the pendant drop technique, whereas the dynamic contact angle measurements, i.e., advancing and receding contact angles, are measured with the sessile drop technique. An equilibrium contact angle of a suspension with particular volume fraction is determined by computing an average over the measured advancing and receding contact angles. It is observed that the surface tension and the equilibrium contact angle determined from advancing and receding contact angles vary with the magnitude of the microbeads volume fraction in the suspension. A decrease in the surface tension with an increase in the volume fraction of the microbead suspension is observed. The advancement and the recession in contact line for dynamic contact angle measurements are achieved with the motorized dosing mechanism. For microbead suspensions, the advancement of the contact line is faster as compared to the recession of the contact line for the same flow rate. The presence of microbeads assists in the advancement and the recession of the contact line of the suspension. A decrease in the equilibrium contact angles with an increase in the microbead suspension volume fraction is observed. Inclusion of microbeads in the suspension increases the wetting capability for the considered combination of the microbead suspension and substrate. Finally, empirical correlations for the surface tension and the contact angle of the suspension as a function of microbead volume fraction are proposed. Such correlations can readily be used to develop mechanistic models for the capillary transport of microbead suspensions related to LOC applications.     

Protonation of Lysozymes and Its Consequences for the Adsorption onto a Mica Surface

Several physicochemical properties of chicken egg white lysozyme (LSZ) in electrolyte solutions were determined. The hydrodynamic diameter of LSZ at an ionic strength of 0.15 M was found to be 4.0 nm. Using the determined parameters, the number of uncompensated (electrokinetic) charges, N(c), on the molecule surface was calculated from the electrophoretic mobility data. It was found that the N(c) = 2.8 at pH = 3.0 and an ionic strength of I = 0.15 M. At the lower ionic strength, I = 1 × 10(-3) M, this positive charge increased to N(c) = 5.6 at a pH = 3.0 The physicochemical characteristics were supplemented by the dynamic viscosity measurements. The intrinsic viscosity and the hydrodynamic diameter results were compared with theoretical predictions from Brenner's model. Using this approach, it was found that the effective molecule length of LSZ is equal to L(ef) = 5.6 nm. Additional information on the LSZ adsorbed films was obtained by the contact angle measurements. The notably large contact angles were measured on LSZ films formed under the conditions where both the LSZ and the mica were oppositely charged. The higher the positive zeta potential of LSZ, the greater the contact angle measured, which indicates that LSZ affinity for the adsorption on mica increases with its uncompensated charge. The adsorption dependence on the zeta potential of LSZ was explained, assuming a roughly uniform distribution of the net charge on the molecule surface. This assumption is supported by the results of depositing negatively charged, fluorescent latex particles onto the mica surface, which had been modified by LSZ adsorption. The highest latex coverage was formed on mica surfaces that had first been coated with LSZ solutions of lower pH, as a result of the increasing charge of LSZ monolayers in this condition.     

Wettability of polymeric solids by ternary mixtures composed of hydrocarbon and fluorocarbon nonionic surfactants

Contact angle (θ) measurements on poly(tetrafluoroethylene) (PTFE) and polymethyl methacrylate (PMMA) surface were carried out for the systems containing ternary mixtures of surfactants composed of: p-(1,1,3,3-tetramethylbutyl)phenoxypoly(ethylene glycols), Triton X-100 (TX100), Triton X-165 (TX165) and Triton X-114 (TX114), and fluorocarbon surfactants, Zonyl FSN100 (FSN100) and Zonyl FSO100 (FSO100). The aqueous solutions of ternary surfactant mixtures were prepared by adding TX114, FSN100 or FSO100 to binary mixtures of TX100+TX165, where the synergistic effect in the reduction of the surface tension of water (γ(LV)) was determined. From the obtained contact angle values, the relationships between cosθ, the adhesion tension and surface tension of solutions, cosθ and the reciprocal of the surface tension were determined. On the basis of these relationships, the correlation between the critical surface tension of PTFE and PMMA wetting and the surface tension of these polymers as well as the work of adhesion of aqueous solutions of ternary surfactant mixtures to PTFE and PMMA surface were discussed. The critical surface tension of PTFE and PMMA wetting, γ(C), determined from the contact angle measurements of aqueous solutions of surfactants including FSN100 or FSO100 was also discussed in the light of the surface tension changes of PTFE and PMMA under the influence of film formation by fluorocarbon surfactants on the surface of these polymers. The γ(C) values of the studied polymeric solids were found to be different for the mixtures composed of hydrocarbon surfactants in comparison with those of hydrocarbon and fluorocarbon surfactants. In the solutions containing fluorocarbon surfactants, the γ(C) values were different taking into account the contact angle in the range of FSN100 and FSO100 concentration corresponding to their unsaturated monolayer at water-air interface or to that saturated.     

Multitechnique surface spectroscopic studies of plasma modified polymers III. H2O and O2/H2O plasma modified poly(methyl methacrylate)s

The surfaces of poly(methyl methacrylate) (PMMA) films modified by O₂H₂O and H₂O radio-frequency glow discharge plasmas were studied using electron spectroscopy for chemical analysis (ESCA or XPS), low energy ion scattering (LEISS or ISS), Fourier transform IR spectroscopy (FTIR) with attenuated total reflectance (ATR) sampling, and critical surface energy from contact angle measurements. The extent and nature of modification with respect to promotion of a hydrophilic surface compared to the hydrophobic surface of the unmodified PMMA has been probed. Results show drastic decreases in C/O ratio at the near surface, which increases to that of the unmodified PMMA as deeper cross sections are analyzed. In addition peak fitting of ESCA data correlated with FTIR functional group information allows for the qualitative and quantitative analysis of the resulting bonding and structure of the modified layer. From these results combined with the polarity and surface energy differences obtained from contact angle measurements, the structural changes are discussed with respect to plasma reaction mechanisms and differences in the structure of the modified polymer films.     

Wetting of heterogeneous surfaces of block copolymers containing fluorinated segments

 The wetting of well-characterized heterogeneous surfaces of block copolymers has been studied by low-rate dynamic contact angle measurements using axisymmetric drop-shape analysis. Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were used to investigate the roughness, the heterogeneity and the chemical composition of the surfaces. By changing the block length of polysulfone and semifluorinated polyester segments in the block copolymers, the surface heterogeneity of thin films prepared on silicon wafers could be controlled. Tapping-mode AFM measurements showed that soft, hydrophobic domains of varying size on the submicrometer length scale were obtained on these surfaces (60–250 nm). The mean roughness was of the order of several nanometers. The results of the contact angle measurements showed that neither roughness nor heterogeneity had a significant effect on the advancing contact angle of water, at the scale of the features present; however, the contact angle hysteresis increased with increasing percentage of the soft domains. We assume that liquid retention by the solid upon retraction of the three-phase line is the main cause for the observed increase in contact angle hysteresis. Concerning the molecular composition of these block copolymer surfaces, angle-resolved XPS analysis showed a surface segregation of fluorine within the surface region. A direct correlation was found between the fluorine content of the block copolymer surfaces and the advancing contact angle of water. Received: 26 May 2000 Accepted: 3 January 2001     

Zeta potential and surface free energy changes of solid-supported phospholipid (DPPC) layers caused by the enzyme phospholipase A2 (PLA2)

Stability and wetting properties changes of systems formed of phospholipid DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) layers covering silica particles or glass slides due to the phospholipase A₂ (PLA₂) action were determined by zeta potential measurements and the surface free energy evaluation, respectively. The comparison of the zeta potential and surface free energy, which was evaluated from advancing and receding contact angles via applying models of interfacial interactions, i.e. van Oss et al. (LWAB) and contact angle hysteresis (CAH), was found to be helpful for better understanding the mechanism of PLA₂ action on the lipid layers, what is discussed in the paper.     

Correlation between chemical and physical surface properties and blood compatibility of PPE/EVA-blends

The chemical and physical surface properties of a biomaterial are of high importance for the blood compatibility of an implant. Blends of poly(propylene-co-ethylene) with various amounts of poly(ethylene-co-vinyl acetate) (PPE/EVA-blends) were examined because of the varying surface hydrophilicity. Surface characterizations were performed by means of X-ray Photoelectron Spectroscopy (XPS), Infrared Spectroscopy in Attenuated Totalreflexion Mode (IR-ATR) in relation to dynamic contact angle and zeta potential measurements. The examination of the blood compatibility of the polymer surfaces was carried out in vitro in a modified BOWRY blood chamber with native whole human blood. A balanced ratio of polar and dispersive surface free energy and a zeta potential of −4 mV are the conditions for a good blood compatibility of the investigated PPE/EVA-blends.     

Effect of oxygen plasma treatment on surface charge and wettability of PVC blood bag—In vitro assay

Wettability and zeta potential studies were performed to characterize the hydrophobicity and surface charge of PVC blood bag samples and evaluate the effect of these properties on fibroblast cells growth. The surface properties of PVC and plasma treated PVC were compared by water drop contact angle and zeta potential measurement. Light microscopy was used to study the behavior of cell attachment and growth on these surfaces. Water drop contact angle measurement shows that the plasma treated PVC becomes more hydrophilic and wettability increased. Zeta potential and in vitro cell culture measurements noticed that the plasma treated PVC surface is more negatively charge and consequently attachment of the L929 fibroblast cells decreased on this surface.     

支链化甜菜碱和阳离子表面活性剂在聚甲基丙烯酸甲酯表面的吸附及其润湿性质

利用座滴法研究了两性离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基羧酸甜菜碱(n = 0, 3)和阳离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基季铵盐溶液在聚甲基丙烯酸甲酯(PMMA)表面上的润湿性质,考察了表面活性剂类型、结构及浓度对接触角的影响趋势。研究发现,表面活性剂浓度低于临界胶束浓度(cmc)时,分子通过氢键以平躺的方式吸附到PMMA界面,亲水基团靠近固体界面, PMMA表面被轻微疏水化;表面张力和粘附张力同时降低,导致此阶段接触角随浓度变化不大。浓度高于cmc时,表面活性剂通过疏水作用吸附,亲水基团在外, PMMA表面被明显亲水改性,接触角随浓度升高显著降低。由于具有相同的支链烷基,表面活性剂类型变化和聚氧乙烯基团的引入对接触角影响不大。     

Water-vapor plasma-based surface activation for trichlorosilane modification of PMMA

Separation rates and resolutions within capillary electrophoretic (CE) systems can be enhanced when surface zeta potentials are uniform with minimum deviations from ideal pluglike flow. Microfluidic CE devices based on poly(methyl methacrylate) (PMMA) are being developed due to the optical clarity, availability, stability, and reproducible electroosmotic flow (EOF) rates displayed by this polymer. Control of EOF in polymer-based CE systems can be achieved by surface zeta potential alteration through chemical modification. Herein, a method will be presented for the surface functionalization of PMMA with chemistry analogous to formation of trichlorosilane self-assembled monolayers on SiO2. The current method involves two separate steps. First, surface activation with water-vapor plasma introduces surface hydroxylation. Second, treatment of the plasma-treated PMMA with a substituted trichlorosilane solution forms the functional surface layer. The modified surfaces were characterized using several analytical techniques, including water contact angle, X-ray photoelectron spectroscopy, Fourier transform infrared-attenuated total reflection, secondary ion mass spectroscopy, and measurement of EOF velocities within PMMA microchannels.     

Surface characteristics of polysulfoalkyl methacrylates

Coated hydroxyethyl methacrylate-sodium sulfoalkyl methacrylate copolymer films were surface characterized. The contact angle hysteresis increases and the receding angle decreases with increasing alkyl side-chain length, while the advancing angle decreases with hydration time. It was found that the buoyancy slopes of the advancing (r_a) and receding (r_r) process determined by the Wilhelmy plate method were not parallel. The ratio of r_a to r_r was greater than 1, and increases with the alkyl side-chain length and the hydration time, contrary to that of polyhydroxyethyl methacrylate, where r_a/r_r was less than 1. The slope ratio would be suppressed in solution with added salt, revealing that the reorientation and expansion of the polymer chain in water is being suppressed. X-ray photoelectron spectroscopy (XPS) analysis of the surface of these copolymers showed a striking enrichment of the sulfonate groups in the surface. The zeta potential was between −40 and −50 mV as measured by the streaming potential method. During dehydration, along with a decrease in sulfur and sodium concentration in the surface, the carbon 1s peak at the high binding energy decreased and the alkyl carbon main peak increased. The surface tension of aqueous solutions of sulfoalkyl methacrylate monomers and homopolymers decreases with increasing alkyl side-chain length, which may contribute to the decrease in water-polymer film interfacial tension and thus the increase in the slope ratio.     

Surface modification of aromatic polyamide film by oxygen plasma

The surface of poly(p-phenylene terephthalamide) (PPTA) films was modified by oxygen plasma, and the modified film surface was analyzed by an advancing contact meter and X-ray photoelectron spectroscopy (XPS). The advancing contact measurement showed that the oxygen plasma treatment made the surface of the PPTA film hydrophilic. The XPS analyses also showed the increase in the O/C and N/C atom ratio, especially the O/C atom ratio, at the PPTA film surface by the oxygen plasma treatment. A main oxygen functionality formed by the oxygen plasma treatment is a carboxylic acid group, and a main nitrogen functionality formed is a protonated amino group. The formation of the oxygen and nitrogen functionalities formed by the oxygen plasma treatment is not restricted to the surface of the PPTA film, but penetrates at least 35 Å deep from the film surface. The formation of these carboxylic acid and protonated amino groups is a result of the bond scission of the amide linkages in the PPTA film. Interactions of photons in the oxygen plasma rather than interactions of electrons and activated oxygen atoms contribute greatly to the bond scission. © 1995 John Wiley & Sons, Inc.     

Characterisation of hydroxyapatite surface modified by poly(ethylene glycol) and poly(hydroxyethyl methacrylate) grafting

Hydroxyapatite (HA) has many applications in medicine as a biocompatible and bioactive biomaterial. Numerous studies have shown that modification of the HA surface can improve its biological and chemical properties. However, little is known about the surface properties of modified materials. In this paper the influence of organic polymers: polyethylene glycol (PEG) and polyhydroxyethyl methacrylate (pHEMA) on the surface properties and surface chemistry of hydroxyapatite (HA) is presented. The surface properties of modified HA were characterised by the FT-IR, XPS, BET, and zeta potential measurements. Specific surface area was determined by BET. Infrared and XPS spectra confirmed the presence of PEG and pHEMA on the surface of HA. The BET N₂ adsorption revealed slight changes in the HA surface chemistry after grafting modification. The surface chemical properties of the HA were considered to be based on the zeta potential. The decrease in zeta potential results in the increasing stability of the modified material and also in the reduction of bacterial adhesion. The reaction for surface modification of HA is proposed and described.     

Solvent-induced self-assembly of mixed poly(methyl methacrylate)/polystyrene brushes on planar silica substrates: molecular weight effect

The effect of molecular weight on the solvent-induced self-assembly of mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes on silicon wafers was studied. For a series of mixed brushes with a fixed PMMA M(n) and systematically changed PS M(n), a transition in water advancing contact angle (theta(a)) from 74 degrees, the value for a flat PMMA surface, to 91 degrees, the value for a flat PS film, was observed with increasing PS M(n) after treatment with CHCl(3). Atomic force microscopy studies showed smooth surfaces for all samples. While no significant changes in surface morphologies were observed after treatment with cyclohexane, a selective solvent for PS, contact angle and XPS studies indicated that the mixed brushes with a PS M(n) slightly smaller than that of PMMA underwent self-reorganization, exhibiting a different theta(a). Intriguing surface morphologies composed of relatively ordered nanoscale domains were found from mixed brushes with PS M(n) slightly smaller than or similar to that of PMMA after treatment with acetic acid, a selective solvent for PMMA. The nanodomains are speculated to be of a micellar structure, with PS chains forming a core shielded by PMMA chains.     

Surface characterization and radical decay studies of oxygen plasma‐treated PMMA films

Polymethylmethacrylate (PMMA) films were modified by RF oxygen plasma with various powers applied for different periods, and the effects of these parameters on the surface properties such as hydrophilicity, surface free energy (SFE), chemistry, and topography were investigated by water contact angle, goniometer, X‐ray photoelectron spectroscopy (XPS), and atomic force microscopy, and the types of the created free radicals and their decay were detected by electron spin resonance spectroscopy (ESR). SFE and contact angle results varied depending on the plasma parameters. Oxygen plasma treatment (100 W–30 min) enhanced the hydrophilicity of PMMA surface as shown by decreasing the water contact angle from 70° to 26°. XPS analysis showed the change in the amounts of the present functionalities as well as formation of new groups as free carbonyl and carbonate groups. The roughness of the surface increased considerably from ~2 nm to ~75 nm after 100 W–30 min oxygen plasma treatment. ESR analysis indicated the introduction of peroxy radicals by oxygen plasma treatment, and the intensity of the radicals increased with increasing the applied power. Significant decrease in radical concentration was observed especially for the samples treated with higher powers when the samples were kept under the atmospheric conditions. As a conclusion, RF plasma, causes changes in the chemical and physical properties of the materials depending on the applied parameters, and can be used for the creation of specific groups or radicals to link or immobilize active molecules onto the surface of a material. Copyright © 2012 John Wiley & Sons, Ltd.     

The wettability of polytetrafluoroethylene and polymethyl methacrylate by aqueous solution of two cationic surfactants mixture

Advancing contact angle (theta) measurements were carried out for aqueous solutions of cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPyB) mixtures on polytetrafluoroethylene (PTFE) and polymethyl methacrylate (PMMA). The obtained results indicate that the wettability of PTFE and PMMA by aqueous solutions of CTAB and CPyB mixtures depends on the composition and concentration of the mixture; however, synergism in the wettability does not exist. In the range of low concentrations of aqueous solution mixtures there is a linear dependence between the contact angle and composition of the mixtures, but at a concentration close to CMC a deviation from linear dependence is observed. In contrast to Zisman, there is no linear dependence between costheta and the surface tension of aqueous solution of CTAB and CPyB mixtures, but a linear dependence exists between the adhesional and surface tension, and these lines have a slope -1 and -0.34 for PTFE and PMMA, respectively, which suggests that adsorption of CTAB and CPyB mixtures at water-air and PTFE-water is the same, and the orientation of the CTAB and CPyB molecules at both interfaces in the saturated monolayer should also be the same. Adsorption of these mixtures at water-air interface is considerably higher than at PMMA-water interface, and CTAB and CPyB molecules should be parallelly oriented to PMMA surface in the saturated monolayer. Extrapolation of the straight lines to the points corresponding to the surface tension of aqueous solution, which completely spreads over the PTFE and PMMA surface, gives a critical surface tension of wetting equal to 23.44 and 33.13 mN/m, respectively. The value of 23.44 mN/m is higher than that of the surface tension of PTFE, but the value of 33.13 is lower than that of Lifshitz-van der Waals components of PMMA surface tension. On the basis of the critical surface tension, the surface tension of PTFE and PMMA, the Young equation, and thermodynamic analysis of the adhesion work of aqueous solution of surfactant to polymer surface, it was found that for PTFE and PMMA the changes of the contact angle of aqueous solution of two cationic surfactants mixtures on their surfaces as a function of the solution concentration resulted only from the decrease of the polar component of the solution surface tension.