Copper(I)-Fesulphos Lewis Acid catalysts for enantioselective Mannich-type reaction of N-sulfonyl imines

[reaction: see text] Copper(I) complexes of Fesulphos ligands are efficient chiral Lewis acid catalysts in the Mannich-type addition of silyl enol ethers of ketones, esters, and thioesters to N-(2-thienyl)sulfonyl aldimines. The corresponding optically active beta-amino carbonyl derivatives were obtained in good yields (58-91%) and with moderate to good enantioselectivity (61-93% ee). Removal of the N-activating group was achieved under mild conditions by simple treatment of the products with Mg in methanol.     

N-alkoxyacrylamides as substrates for enantioselective Diels-Alder reactions

[reaction: see text] The use of N-alkoxyacrylamides as substrates for Lewis acid catalyzed Diels-Alder reactions has been examined. Enantioselectivities up to 92% ee have been achieved using very simple chiral Lewis acids prepared from triisobutylaluminum and 2,2-dimethyl-alpha,alpha,alpha',alpha'-tetra-1-naphthalenyl-TADDOL (1-NaphtTADDOL). The use of Yamamoto's Zn-BINOL, easily prepared from Et2Zn and 1,1'-bi-2-naphthol (BINOL), proved to be even more efficient, and enantioselectivities up to 96% ee were achieved.     

Chiral dendritic bis(oxazoline) copper(II) complexes as Lewis acid catalysts for enantioselective aldol reactions in aqueous media

A series of copper(II) complexes, with chiral bis(oxazoline) ligands disubstituted at the carbon atom linking the two oxazolines by Fréchet-type polyether dendrimers, have been designed and synthesized. These complexes were used as Lewis acid catalysts in enantioselective aldol reactions in aqueous media. Good yields and moderate enantioselectivities were achieved, which are comparable with those resulting from the corresponding smaller catalysts.     

Supported chiral Mo-based complexes as efficient catalysts for enantioselective olefin metathesis

Syntheses and catalytic activities of seven new polymer-supported chiral Mo-based complexes are disclosed. Four of the complexes are polystyrene-based, and three involve polynorbornene supports. Studies concerning the ability of the polymer-bound chiral complexes to promote an assortment of asymmetric ring-closing (ARCM) and ring-opening (AROM) metathesis reactions are detailed. In many instances, levels of reactivity and enantioselectivity are competitive with those of the analogous homogeneous catalysts. The positive effect of lower cross-linking within the polymer backbone on reaction efficiency and asymmetric induction is detailed. The optically enriched products obtained through the use of the supported complexes, after simple filtration and removal of the supported Mo catalysts, contain significantly lower levels of metal impurities as compared to products synthesized with the corresponding homogeneous catalysts.     

New and efficient catalysts for enantioselective borohydride reduction of ketones and imines

Optically active aldiminato cobalt(II) complexes have been found to catalyze the enantioselective reduction of ketones with sodium borohydride affording the corresponding optically active secondary alcohols in high chemical yields with high enantioselectivities. The enantioselective borohydride reduction is also applicable to not only C=O bonds in aromatic ketones but also to C=N bonds in aromatic imines.     

Chiral bispyridylamide metal complexes as catalysts for the enantioselective addition of TMSCN to aldehydes

The use of (1R,2R)-N,N′-bis(2-pyridinecarboxyamido)-1,2-diphenylethane metal complexes as catalysts for the enantioselective addition of trimethylsilyl cyanide to aldehydes is described. Enantioselectivities up to 70% ee were obtained with a Ti(IV) catalyst. Complexes with Zr(IV), Sc(III), Yb(III) and Cu(II) afforded less selective catalysts. For the Zr(IV) complex, a rate and selectivity enhancement was observed when adding 0.5 equiv. of water with respect to the catalyst. Studies of the metal complexes involved in the reaction were carried out by means of ¹H NMR spectroscopy. A Zr complex was shown by X-ray crystallography to exhibit distorted octahedral coordination, with the four nitrogen atoms of the doubly deprotonated ligand essentially in one plane.     

Synthesis of new chiral cyclic 1,2-diamines and their evaluation as catalysts for enantioselective Diels-Alder reactions

The synthesis of new, enantiomerically pure cyclic 1,2-diamine structures was realized through a zinc promoted coupling of chiral bis-imines easily prepared starting from a chiral biphenyl dicarboxylic acid. The catalytic properties of such novel compounds were preliminarily studied; the trifluoroacetate salts of these chiral 1,2-diamines were shown to be able to catalyze the Diels-Alder reaction between cyclopentadiene and α,β-unsaturated aldehydes with good exo stereoselectivity and enantioselectivities up to 71%.     

Chiral 1,1'-binaphthyl-2,2'-diammonium salt catalysts for the enantioselective Diels-Alder reaction with alpha-acyloxyacroleins

[reaction: see text] A diammonium salt of chiral 1,1'-binaphthyl-2,2'-diamine and trifluoromethanesulfonimide (Tf(2)NH) shows excellent catalytic activity and enantioselectivity for the Diels-Alder reaction of alpha-acyloxyacroleins with cyclic dienes. For example, in the presence of 5 mol % of the ammonium catalyst, the Diels-Alder reaction of alpha-(cyclohexanecarbonyloxy)acrolein with cyclopentadiene proceeded in EtCN at -75 degrees C to give the adducts in 88% yield with 92% exo and 91% ee. This catalyst can be easily prepared in situ by mixing the commercially available chiral diamine and Tf(2)NH.     

Design and development of highly effective Lewis acid catalysts for enantioselective Diels-Alder reactions

This report describes the design and development of chiral Co(III)-salen catalysts for enantioselective Diels-Alder reactions. A crystal structure of a Co-salen catalyst with two equivalents of benzaldehyde provided insight on the factors that may be important for enantioselectivity. On the basis of this structural information, new catalysts were prepared in which the "bay region" tert-butyl groups were replaced by trimethylsilyl groups. The new silyl-substituted catalysts were exceptionally effective (catalyst loadings down to 0.05 mol %) and convenient to use-room temperature, under an air atmosphere, using a minimum amount of solvent.     

Chiral aminophosphines as catalysts for enantioselective double-Michael indoline syntheses

The bisphosphine-catalyzed double-Michael addition of dinucleophiles to electron-deficient acetylenes is an efficient process for the synthesis of many nitrogen-containing heterocycles. Because the resulting heterocycles contain at least one stereogenic center, this double-Michael reaction would be even more useful if an asymmetric variant of the reaction were to be developed. Aminophosphines can also facilitate the double-Michael reaction and chiral amines are more readily available in Nature and synthetically; therefore, in this study we prepared several new chiral aminophosphines. When employed in the asymmetric double-Michael reaction between ortho-tosylamidophenyl malonate and 3-butyn-2-one, the chiral aminophosphines produced indolines in excellent yields with moderate asymmetric induction.     

Chiral hydroxythiols as catalysts for enantioselective borane ketone reductions

Several chiral 1,2- and 1,3-hydroxythiols derived from (R)-camphor, (1S)-(+)-10-camphorsulfonyl chloride, cysteine and cystine derivatives were prepared and evaluated as catalysts in borane ketone reductions. Under the best experimental conditions (10 mol% catalyst, THF, 35°C), a 95% yield of (R)-1-phenylethanol of 64% ee was obtained in the borane reduction of acetophenone.     

Cerium complexes of cyclodextrin dimers as efficient catalysts for luminol chemiluminescence reactions

The chemiluminescence of a luminol-H(2)O(2) system is found to be remarkably enhanced by the Ce(IV) complexes of EDTA-bridged cyclodextrin dimers. The dimers were proved to work much more efficiently than the corresponding monomer. The cavity shape of cyclodextrin moieties and their cooperation displayed an important role in amplifying the chemiluminescence. Further modification of either the cyclodextrin rims or the EDTA linker altered significantly the catalytic abilities of the cyclodextrin dimers, and the examination of the effect of substituents on the chemiluminescence outputs suggested that the proximity between the cyclodextrin cavity and the metallic center might account for the amelioration of the chemiluminescence output.     

Simple and efficient heterogeneous copper catalysts for enantioselective C-H carbene insertion

Immobilized box-Cu complexes are able to efficiently catalyze the insertion of a carbene, from methyl phenyldiazoacetate, into C-H bonds of THF, with high enantioselectivity (up to 88% ee). The immobilization not only allows recovery and reuse of the enantioselective catalyst but also provides an improvement in the selectivities from the values obtained in solution, probably due to a confinement effect of the bidimensional support. [reaction: see text].     

Hydroxyapatite-bound cationic ruthenium complexes as novel heterogeneous lewis acid catalysts for Diels-Alder and aldol reactions

Creation of a stable and well-defined active center on a solid surface is a promising protocol for designing more efficient hybrid-catalysts that bridge the gap between homogeneous and heterogeneous catalysis. Treatment of a hydroxyapatite-bound Ru complex (RuHAP) with an aqueous solution of AgX (X = SbF6-, TfO-) afforded a new type of cationic Ru phosphate complex, having potentially vacant coordination sites. These cationic RuHAPs exhibited Lewis acidity toward carbonyl and cyano groups, promoting Diels-Alder and Aldol reactions with high efficiencies. Moreover, no Ru leaching was detected in the above organic reactions, and then the catalysts were recyclable.     

Alpha'-hydroxy enones as achiral templates for Lewis acid-catalyzed enantioselective Diels-Alder reactions

alpha'-Hydroxy enones react with dienes in the presence of (S,S)-[Cu(tBu-box)](OTf)2 or (S,S)-[Cu(tBu-box)](SbF6)2 (2 to 10 mol %) to afford the corresponding Diels-Alder adducts in high yield and selectivity. Isomeric ratios (regioselectivity, endo/exo or cis/trans) of up to >99:1 and ee values of up to >99% are obtained. Significantly, difficult dienes such as isoprene, 2,3-dimethyl butadiene and piperylene behave satisfactorily. Subsequent oxidative cleavage of the ketol in the resulting cycloadducts by treatment with cerium ammonium nitrate (CAN) yields the corresponding enantiopure carboxylic acids. Alternatively, carbonyl addition and subsequent diol cleavage with CAN produces the corresponding ketone adducts.     

Chiral phosphine-squaramides as enantioselective catalysts for the intramolecular Morita-Baylis-Hillman reaction

Novel squaramides containing tertiary phosphine were developed as chiral bifunctional organic catalysts to promote the asymmetric intramolecular Morita-Baylis-Hillman reaction of ω-formyl-enones. The adducts were obtained in high yields with good-to-excellent enantioselectivity (up to 93% ee).     

Chiral (iminophosphoranyl)ferrocenes: highly efficient ligands for rhodium- and iridium-catalyzed enantioselective hydrogenation of unfunctionalized olefins

A series of chiral (iminophosphoranyl)ferrocenes (1-3) are highly efficient ligands for Rh- and Ir-catalyzed hydrogenation of a number of unfunctionalized olefins; almost perfect enantiomeric excesses (up to 99% ee) have been achieved under mild reaction conditions.     

Recoverable salen-based macrocyclic chiral complexes; catalysts for enantioselective Henry reactions

Cobalt and chromium complexes have been prepared from chiral calix–salen cyclic ligands. The corresponding tetrahydrosalen reduced forms have been used for copper salt complexation. These new chiral catalysts have been tested for their ability to promote asymmetric Henry reactions between various aldehydes and nitromethane under heterogeneous conditions. The best results were obtained by using tetrahydrosalen-based copper macrocycles, in terms of activity, selectivity, and stability during the recycling process. Ten consecutive runs could indeed be performed with the same catalyst batch to produce the target 1-(2-methoxy-phenyl)-2-nitro-ethanol with highly stable values in terms of yield and enantioselectivity (up to 94% ee).