金属-有机骨架材料MOF-5的改进与吸附甲烷的巨正则蒙特卡罗模拟

根据金属-有机骨架材料(MOFs)的设计思想, 在MOF-5(对苯二甲酸为桥联配体, Zn4O金属簇为中心的配位化合物)的基础上设计了10 种以Zn4O 金属簇为中心(Corner), 以不同基团单取代的对苯二甲酸(BDC)衍生物为桥联配体(Linker)的多孔材料. 用巨正则蒙特卡罗(GCMC)模拟方法, 计算了这些材料在298 K、1-10 MPa条件下对甲烷的吸附量, 讨论了不同取代基与甲烷吸附量的关系.结果发现, 在298 K、3.5 MPa 时甲烷的吸附量主要取决于吸附热, 并且以硝基取代的配体构成的MOF分子吸附甲烷效果最好. 在此基础上, 进一步设计了以四硝基取代对苯二甲酸为桥联配体的MOF-4NO2, 该结构在相同条件下对甲烷的超额吸附量为209 cm3·cm-3, 总吸附量达到228 cm3·cm-3, 比美国能源部(DOE)提出的甲烷吸附材料应用要求标准高26%.     

分子模拟研究微孔材料对光气吸附扩散性能的影响及材料筛选

利用分子模拟的方法研究了微量光气(COCl₂)在微孔材料中的吸附和扩散性能, 并分析了材料结构的影响. 结果表明, 光气在金属有机框架材料(MOF)和共价有机框架材料(COF)中的吸附等温线主要表现为第Ⅰ类型和第Ⅴ类型吸附. 当光气压力较低时, COF材料和含有开放金属位点的材料对其吸附性能较好. 通过对不同压力下吸附量的比较发现, 吸附达到饱和前, 随着压力和孔隙率(VF)的升高, 材料对光气的吸附量增大. 通过分子动力学模拟研究光气在微孔材料中的扩散性能发现, 较强吸附位点的存在不利于光气在孔道中的扩散. 通过气体分子在材料中的径向函数分布图及模拟轨迹分析发现, 分子协同效应和空间位阻效应相互竞争决定了扩散速率的快慢. 综合评价材料的吸附和扩散性能发现, COF-102, COF-300, ZnMOF-74, Zn-DOBDC和PCN-60是理想的吸附材料, 这些材料可以应用于环境中光气泄漏的防治.     

蒸气辅助合成PCN-6(M)双金属有机框架材料及其CH_(4)和CO_(2)吸附性能北大核心CSCD

以PCN-6(Cu_(3)TATB_(2))为母体材料,Co、Fe、Mn、Zn和Ni为第2种金属,将蒸气辅助法应用于双金属有机框架材料(MOFs)的合成中,并成功制备出PCN-6(M)(M=Co/Fe/Mn/Zn/Ni)系列双金属材料,采用粉末X射线衍射仪(PXRD)、扫描电子显微镜(SEM)、能谱仪(EDS)、电感耦合等离子发射光谱仪(ICP-OES)和气体吸附等技术手段对合成的材料进行了结构、形貌、组成和性能的表征,结果表明制备的PCN-6(M)系列双金属材料的PXRD衍射峰和形貌与母体材料PCN-6一致,交换的金属在材料中分布均匀,交换量(质量分数)分别为Co:12.1%,Fe:22.0%,Mn:16.1%,Zn:17.5%,Ni:16.8%,远高于相同条件下溶剂热法的金属交换量(5%左右),在气体吸附性能方面,PCN-6(Zn)、PCN-6(Ni)和PCN-6(Co)这3种双金属材料对CH_(4)和CO_(2)的吸附能力优于母体材料,理想吸附溶液理论(IAST)计算表明,PCN-6(Fe)对CO_(2)/CH_(4)的吸附选择性优于母体材料。通过蒸气辅助法制备双金属MOFs材料,可以提高金属的交换量并改变MOFs材料对不同气体分子的亲合力,进而提高材料对气体的吸附性能和选择性。蒸气辅助法为双金属MOFs材料的制备提供了新的思路,且有望用应于其它材料的制备中。     

金属有机框架材料在催化领域的研究现状与展望（英文）

金属有机骨架材料(MOF)又称多孔配位聚合物(PCP),是一类由金属团簇和有机配体通过配位作用形成的新型晶态多孔材料.近30年, MOF材料在催化领域受到了广泛的关注和研究.MOF的多孔结构和高比表面积可以实现催化位点的空间分离并促进物质传输,从而提高催化活性.MOF可以像均相催化剂一样在原子精度进行灵活剪裁和调控,同时具有非均相催化剂易分离回收的优势.通过结合均相和非均相催化剂的优点, MOF表现出了诸多优于传统催化材料的独特性质.本文首先简要介绍了MOF基催化材料设计的基本原理和MOF应用于催化的独特性,其次对MOF在催化中面临的瓶颈和局限进行了论述,最后指出了MOF在未来催化领域中潜在的独特应用前景.MOF材料中金属节点、有机配体和孔空间都可以进行灵活功能化,从而赋予催化活性.金属节点上的不饱和配位点可作为路易斯酸催化中心.配体可以通过修饰不同功能基团从而赋予催化活性.此外,金属节点和有机配体还可以通过接枝外来催化位点进行功能化.更重要的是, MOF孔空间可以限域客体活性单元,极大扩展了活性位的来源.MOF还可以作为前驱体通过化学转化获得多孔碳、金属化合物及其复合材料.MOF的高...     

Hg(Ⅱ)和Pb(Ⅱ)-MOF探针研究进展

金属有机框架材料(MOF)是一种由金属离子和桥联配体自组装而成三维网状结晶固体骨架材料，是一种新型的多孔配位聚合物材料。由于其具有孔结构可调节性，结构可设计性和超高比表面积等特点，因此在很多领域展现出广泛的应用前景，尤其是在吸附重金属离子方面的应用受到了很大关注。本文综述了近几年分别由单配和混合方式构筑的MOF材料在吸附Hg(Ⅱ)和Pb(Ⅱ)方面的应用，并对MOF材料在重金属离子吸附领域做出展望。     

锆基MOF孔道限域强化及其低碳烃吸附分离性能

从天然气中回收C2/C3低碳烃组分以及乙烯/乙烷、丙烯/丙烷的分离纯化具有重要的工业价值,吸附分离技术可以在常温常压下高效分离低碳烃。对金属有机骨架(Metal-Organic Framework,MOF)材料进行次级结构单元(Second Building Units,SBU)调控,构筑限域强化的碱性孔道化学微环境并引入新的吸附位点,可以提升其吸附分离性能。文章用三乙烯二胺(TED)取代Zr-TBAPy中SBU配位的水分子,制备了具有更大烷烃吸附容量和选择性的TED@Zr-TBAPy。其中,TED_1/3@Zr-TBAPy表现出优先吸附烷烃的特征,丙烷/丙烯、乙烷/乙烯的理想吸附溶液理论(Ideal Adsorption Solution Theory,IAST)选择性分别为1.32、1.49,比Zr-TBAPy提高了15.7%和3.5%。常温常压下,丙烷/甲烷和乙烷/甲烷的IAST选择性分别达到287和14,比Zr-TBAPy提高了116%和19.7%,超过大部分已报道的同类材料。机理研究表明,TED的引入提高了孔道的限域吸附作用,同时引入对烷烃具有更强吸附作用...     

基于金属有机框架水凝胶的一步式快速富集检测养殖水体中孔雀石绿北大核心CSCD

孔雀石绿是一种三苯甲烷类化合物,在水产品饲养中对疾病的防治有着不错的疗效,但因对人体健康有危害而被列为禁用药。由于实际样品中成分复杂,对于此类染料的检测方法难以同时兼具富集性好、灵敏度高且方便快速的优点。该工作制备了金属有机框架材料(MOF),采用MOF纳米材料掺杂的水凝胶(PAAM-SA/MOF)对养殖水体中的孔雀石绿进行吸附研究。采用一系列表征手段对MOF、PAAM-SA和PAAM-SA/MOF的微观形貌进行分析,结果表明吸附材料已成功合成。通过优化水凝胶吸附剂用量、吸附时间、孔雀石绿溶液pH、吸附温度、孔雀石绿溶液初始浓度等吸附萃取条件,使溶液中的孔雀石绿基本完全吸附在水凝胶中,在最优条件下,吸附效率最高可达97%。此外,采用不同极性的有机溶剂对吸附的孔雀石绿进行洗脱,通过优化洗脱液体积,脱附率最高达99%。在最佳条件下,该方法在高、中、低3个水平下的样品加标回收试验中回收率达到84.8%~118.1%,相对标准偏差小于5.1%,方法的检出限为0.083μg/L(S/N=3),定量限为0.25μg/L(S/N=10)。该方法简化了前处理过程,结合了MOF和水凝胶这二者各自的优点,添加的MOF材料可以在水凝胶体系中发挥其良好的吸附性,既解决了传统的MOF材料因粒径太小而回收率低的难题,便于吸附后直接提取,同时也解决了纯水凝胶吸附效率较低的问题,整体上提高了吸附效率和可回收性。实际样品测试表明该新型水凝胶吸附材料可用于养殖水体中孔雀石绿的快速萃取和检测,在食品检测领域具有很大潜力。     

多孔金属有机骨架材料储氢性能分子模拟

采用优化的DREIDING力场参数, 通过巨正则系综蒙特卡洛(GCMC)模拟方法对H₂在IRMOF-1、IRMOF-61和IRMOF-62共3种金属有机骨架(MOFs)材料中的吸附平衡性能进行了比较研究. 结果表明, 该力场能够在全压力范围内很好地复制H₂在IRMOF-62材料中的等温吸附曲线; 但对低压下H₂在IRMOF-61中的等温吸附曲线预测出现低估. 与IRMOF-1相比, 具有互穿骨架结构的IRMOF-61和IRMOF-62材料在常温下的储氢能力并无明显提高. 进一步比较77 K时100 kPa、3.0 MPa下H₂在上述MOFs材料中达到吸附平衡时的几率密度分布发现, H₂会优先吸附在Zn₄O骨架附近靠近苯环的位置;对具有互穿结构的MOFs材料而言,由于其孔腔尺寸缩小, 使得H₂优先吸附位区域零散化. 适当长度的有机配体形成的互穿骨架结构能增强与H₂分子之间的相互作用, 具备较高的储氢能力; 而有机配体尺寸过长则会增加骨架结构中H₂吸附死角, 对H₂的吸附能力反而出现下降.     

金属-有机骨架材料中吸附气体的扩散速率

采用分子动力学方法,以甲烷为探针分子研究了不同压力条件下气体在具有不同孔道结构的金属-有机骨架材料(MOFs)中的扩散速率.通过计算气体在八种材料中的自扩散系数,并结合气体分子在材料中的质心分布图等,讨论了气体扩散速率与孔道结构之间的关系.研究结果表明:对于同时含有孔笼(pocket)和三维正交孔道(channel)结构的MOF材料(P-C材料),低压时甲烷气体吸附在孔笼结构中,随着压力的升高,气体分子开始进入正交孔道,同时其自扩散系数增加;而对于只含有三维立方孔道结构的IRMOF(isoreticular MOF)系列材料,在中低压范围内,气体分子在其中的自扩散系数随压力变化较小.当压力进一步升高时,气体分子在材料孔道中的吸附逐渐接近饱和,其自扩散系数均降低.因此,在不同MOF材料中气体分子扩散速率的差异主要取决于孔道结构的不同.对P-C材料,中低压下通过控制压力可以控制气体在其中的扩散速率,从而为MOF材料在气体存储、分离等方面的实际应用提供参考信息.     

氨/醛基金属有机骨架材料合成及其在吸附分离中的应用

吸附分离过程具有高效率、低能耗等特点,广泛用于石油、化工、制药、环保等诸多领域。其中,吸附分离材料的结构特点(如比表面积、孔径、孔体积、表面官能团等)对吸附分离效果起决定性作用。金属有机骨架(MOF)材料具有优异的孔结构特点,同时其表面还具有丰富的官能团(—NH₂、—CHO等),易于后修饰功能化并赋予其特定的功能,从而增强MOF材料与吸附质之间的相互作用,实现较高的吸附容量和分离选择性。以此为导向,本文首先概括了氨/醛基MOF材料的合成策略,总结了亚胺共价后修饰MOF (ICPSM-MOF)材料的研究进展,并重点介绍了这类材料在气、液相吸附分离领域的应用,最后分析了当前ICPSM-MOF材料面临的困难与挑战,并对其未来研究方向进行了展望。     

Metal-organic framework from an anthracene derivative containing nanoscopic cages exhibiting high methane uptake

A microporous metal-organic framework, PCN-14, based on an anthracene derivative, 5,5'-(9,10-anthracenediyl)di-isophthalate (H4adip), was synthesized under solvothermal reaction conditions. X-ray single crystal analysis revealed that PCN-14 consists of nanoscopic cages suitable for gas storage. N2-adsorption studies of PCN-14 at 77 K reveal a Langmuir surface area of 2176 m2/g and a pore volume of 0.87 cm3/g. Methane adsorption studies at 290 K and 35 bar show that PCN-14 exhibits an absolute methane-adsorption capacity of 230 v/v, 28% higher than the DOE target (180 v/v) for methane storage.     

Unusual adsorption site behavior in PCN-14 metal-organic framework predicted from Monte Carlo simulation

The adsorption equilibrium of methane in PCN-14 was simulated by the Monte Carlo technique in the grand canonical ensemble. A new force field was proposed for the methane/PCN-14 system, and the temperature dependence of the molecular siting was investigated. A detailed study of the statistics of the center of mass and potential energy showed a surprising site behavior with no energy barriers between weak and strong sites, allowing open metal sites to guide methane molecules to other neighboring sites. Moreover, this study showed that a model assuming weakly adsorbing open metal clusters in PCN-14, densely populated only at low temperatures (below 150 K), can explain published experimental data. These results also explain previously observed discrepancies between neutron diffraction experiments and Monte Carlo simulations.     

金属-有机骨架材料中甲烷吸附机理的密度泛函理论研究

采用密度泛函理论研究了甲烷在MOF-5中的吸附位置、吸附构型和吸附能. 结果表明: 吸附位置主要有四种, Zn₄O簇为最佳吸附位, 其吸附能为17.38 kJ•mol^－1, 高于沸石中的甲烷吸附能. 从吸附能与MOF-5的结构关系分析得出: 在苯环中引入给电子基团, 有利于增强甲烷与MOFs的吸附作用; 引入含氧等极性官能团, 将增加甲烷吸附位, 有利于提高吸附储存量.     

Further investigation of the effect of framework catenation on hydrogen uptake in metal-organic frameworks

Hydrogen-sorption studies have been carried out for the catenation isomer pairs of PCN-6 and PCN-6' (both have the formula of Cu(3)(TATB)(2), where TATB represents 4,4',4'-s-triazine-2,4,6-triyl-tribenzoate with a formula of C(24)H(12)N(3)O(6)). Inelastic neutron scattering (INS) studies reveal that the initial sites occupied by adsorbed H(2) are the open Cu centers of the paddlewheel units with comparable interaction energies in the two isomers. At high H(2) loadings, where the H(2) molecules adsorb mainly on or around the organic linkers, the interaction is found to be substantially stronger in catenated PCN-6 than in noncatenated PCN-6', leading to much higher H(2) uptake in the isomer with catenation. Hydrogen sorption measurements at pressures up to 50 bar demonstrate that framework catenation can be favorable for the enhancement of hydrogen adsorption. For example, the excess hydrogen uptake of PCN-6 is 72 mg/g (6.7 wt %) at 77 K/50 bar or 9.3 mg/g (0.92 wt %) at 298 K/50 bar, respectively, and that for PCN-6' is 42 mg/g (4.0 wt %) at 77 K/50 bar or 4.0 mg/g (0.40 wt %) at 298 K/50 bar. Importantly, PCN-6 exhibits a total hydrogen uptake of 95 mg/g (8.7 wt %) (corresponding to a total volumetric value of 53.0 g/L, estimated based on crystallographic density) at 77 K/50 bar and 15 mg/g (1.5 wt %) at 298 K/50 bar. Significantly, the expected usable capacity of PCN-6 is as high as 75 mg/g (or 41.9 g/L) at 77 K, if a recharging pressure of 1.5 bar is assumed.     

Design of covalent organic frameworks for methane storage

We designed 14 new covalent organic frameworks (COFs), which are expected to adsorb large amounts of methane (CH(4)) at 298 K and up to 300 bar. We have calculated their delivery uptake using grand canonical Monte Carlo (GCMC) simulations. We also report their thermodynamic stability based on 7.5 ns molecular dynamics simulations. Two new frameworks, COF-103-Eth-trans and COF-102-Ant, are found to exceed the DOE target of 180 v(STP)/v at 35 bar for methane storage. Their performance is comparable to the best previously reported materials: PCN-14 and Ni-MOF-74. Our results indicate that using thin vinyl bridging groups aid performance by minimizing the interaction methane-COF at low pressure. This is a new feature that can be used to enhance loading in addition to the common practice of adding extra fused benzene rings. Most importantly, this report shows that pure nonbonding interactions, van der Waals (vdW) and electrostatic forces in light elements (C, O, B, H, and Si), can rival the enhancement in uptake obtained for microporous materials derived from early transition metals.     

Tailor-made metal-organic frameworks from functionalized molecular building blocks and length-adjustable organic linkers by stepwise synthesis

In this work, we have demonstrated a family of diamondoid metal-organic frameworks (MOFs) based on functionalized molecular building blocks and length-adjustable organic linkers by using a stepwise synthesis strategy. We have successfully achieved not only "design" and "control" to synthesize MOFs, but also the functionalization of both secondary building units (SBUs) and organic linkers in the same MOF for the first time. Furthermore, the results of N(2) and H(2) adsorption show that their surface areas and hydrogen uptake capacities are determined by the most optimal combination of functional groups from SBUs and organic linkers, interpenetration, and free volume in this system. A member of this series, DMOF-6 exhibits the highest surface area and H(2) adsorption capacity among this family of MOFs.     

Principles of methane adsorption and natural gas storage

The adsorption amount of methane on 16 different kinds of materials at 3.5 MPa and 298 K holds a linear relation with the specific surface area. The linear relationship implies that gases are adsorbed monolayerly on the surface of adsorbents at above-critical temperatures. Determination of surface area and calculation of storage capacity of a material are explicitly discussed. It is indicated that methane storage is different from natural gas storage and the difference affects the development of storage material. Natural gas is a mixture and all components other than methane cannot be desorbed when the tank pressure released to atmospheric at ambient temperature, therefore, a storage mechanism other than adsorption might be more suitable.     

Ligand design for functional metal-organic frameworks

Metal-organic frameworks (MOFs), also known as coordination polymers, are formed by the self-assembly of metallic centres and bridging organic linkers. In this critical review, we review the key advances in the field and discuss the relationship between the nature and structure of specifically designed organic linkers and the properties of the products. Practical examples demonstrate that the physical and chemical properties of the linkers play a decisive role in the properties of novel functional MOFs. We focus on target materials suitable for the storage of hydrogen and methane, sequestration of carbon dioxide, gas separation, heterogeneous catalysis and as magnetic and photoluminescent materials capable of both metal- and ligand-centred emission, ion exchangers and molecular sieves. The advantages of highly active discrete complexes as metal-bearing ligands in the construction of MOFs are also briefly reviewed (128 references).     

纳米碳管储能的化学原理与储存容量研究

通过在大温度、压力范围内系统地测定氢在纳米碳管粉末与压片上的吸附等温线和对所得等温线的理论分析,计算出吸附热,并用超临界气体的吸附模型充分地描述了氢在纳米碳管上的吸附行为,证明纳米碳管储氢的原理是超临界吸附;比表面积和储气温度控制着储气容量.甲烷在干纳米碳管上的吸附机理与氢气相同,但在湿纳米碳管中的存储机理在于甲烷水合物的生成,因此孔容控制储气容量.单位质量多壁管的湿储容量是干储容量的5.1倍 ,单壁管可能产生更大的增强存储作用.