Zinc complexes supported by claw-type aminophenolate ligands: synthesis, characterization and catalysis in the ring-opening polymerization of rac-lactide

A series of zinc silylamido complexes bearing claw-type multidentate aminophenolate ligands, [LZnN(SiMe(3))(2)] (L = -OAr(1)-CH(2)N[(CH(2))(n)NR(2)]CH(2)Ar(2), n = 2 or 3; R = Me or Et (1a-3a, 5a, 7a and 8a); L = -OC(6)H(2)-4,6-(t)Bu(2)-2-CH(2)N[(CH(2))(2)OMe](2) (9a)), have been synthesized via the reaction of Zn[N(SiMe(3))(2)](2) and 1 equiv. of corresponding aminophenol. The reaction of Zn[N(SiMe(3))(2)](2) with the proligand L(6)H (2-{N-(2-methoxybenzyl)-N-[3-(N',N'-dimethylamino)propyl]aminomethyl}-4-methyl-6-tritylphenol) resulted in the formation of bisphenolate zinc complex 6 regardless of the stoichiometric ratio of the two starting materials. Complex 4b with an initiating group of 3-tert-butyl-2-methoxy-5- methylbenzyloxy was obtained and further studied via the X-ray diffraction method to be monomeric. Zinc ethyl complex 2c was also prepared from the reaction of ZnEt(2) and 1 equiv. of proligand L(2)H as the representative complex with an alkyl initiating group. All zinc silylamido complexes efficiently initiated the ring-opening polymerization of rac-lactide in the presence or absence of isopropanol at ambient temperature. The steric and electronic characteristics of the ancillary ligands significantly influenced the polymerization performance of the corresponding zinc complexes. The introduction of bulky ortho- substituents on the phenoxy moiety resulted in an apparent decrease of catalytic activity while a slightly enhanced isotactic selectivity. Meanwhile, the elongation of the pendant amine arm to three-carbon-atom linkage led to significant decline of the catalytic activity in the absence of isopropanol. The zinc ethyl complex 2c was not such an efficient initiator as the silylamido ones, but the alkoxy complex 4b gave an obviously faster and better controlled polymerization when compared to the zinc silylamido complexes.     

Heteroscorpionate rare-earth metal zwitterionic complexes: syntheses, characterization, and heteroselective catalysis on the ring-opening polymerization of rac-lactide

Novel neutral phosphine-modified heteroscorpionate ligand (3,5-Me(2)Pz)(2)CHPPh(2) (1) and its derivatives oxophosphine (2) and iminophosphine (3) heteroscorpionates were synthesized for the first time. These neutral heteroscorpionate ligands displayed unique chemistry towards rare-earth metal tris(alkyl)s [Ln(CH(2)SiMe(3))(3)(thf)(2)] (Ln=Y, Lu, Sc). The reaction between compound 1 and [Ln(CH(2)SiMe(3))(3)(thf)(2)] afforded heteroscorpionate rare-earth metal trialkyl adduct complexes 4a-c. Compounds 2 and 3 were treated with [Ln(CH(2)SiMe(3))(3)(thf)(2)] to give the unprecedented zwitterionic heteroscorpionate rare-earth metal dialkyls 5 and 6, respectively. In the process, the heteroscorpionates transferred to the carbanions by means of methine C-H bond cleavage that was attributed to the presence of the electron-withdrawing groups. In addition the ligand and central metal showed a concerted effect on both the catalytic activity and specific selectivity of complexes 4-6 for the ring-opening polymerization (ROP) of rac-lactide (rac-LA). All the adduct complexes 4 were nonselective and gave atactic polylactide (PLA), probably due to the dissociation of ligand 1 from the active metal center during the polymerization. Strikingly, zwitterionic complexes 5 catalyzed rapid ROP of rac-LA to produce PLAs with heterotacticity up to 0.87. However, the zwitterionic complexes 6 were less active and less selective than 5, which might be on account of the stronger coordination of the tetradentate ligand. Complexes 5 represent rare examples of the selective ROP of rac-LA mediated by rare-earth metal complexes supported by non-bisphenolate ligands.     

Highly heteroselective ring-opening polymerization of racemic lactide initiated by divalent ytterbium complexes bearing amino bis(phenolate) ligands

Polymerization of racemic lactide initiated by divalent ytterbium complexes supported by either dimethylamino-amino bis(phenolate) or methoxy-amino bis(phenolate) ligands proceeds rapidly at room temperature in a living fashion to give heterotactic polylactide with the racemic enchainment of monomer units P(r) ranging from 0.97-0.99.     

Rare-earth metal dichloride and bis(alkyl) complexes containing amidinate-amidopyridinate ligands: synthesis,structure, and reactivity

A reaction of anhydrous yttrium chloride with an equimolar amount of lithium amidinateamidopyridinate obtained in situ by metallation of N,N’-bis(2,6-dimethylphenyl)-N-{6-[(2,6-dimethylphenyl)amino]pyridin-2-yl}acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N(2,6-Me₂C₆H₃)C(Me)=N(2,6-Me₂C₆H₃), L¹H) (1) with n-butyllithium in THF at–70 °C was used to synthesize the yttrium dichloride complex (L¹)YCl₂(THF)₂ (2). The lutetium bis(alkyl) complex, namely, N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl-N-{6-[(2,6-dimethylphenyl)amido]pyridin-2-yl}acetimidoamidinatebis(trimethylsilylmethyl)lutetium (4), was obtained by the reaction of N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl)-N-(6-((2,6dimethylphenyl)amino)pyridin-2-yl)acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N-(2,6-Me₂C₆H₃)C(Me)=N(2,6-Pr ₂ ⁱ C₆H₃), L²H (3)) with an equimolar amount of Lu(CH₂SiMe₃)₃(THF)₂. Complex 4 was found to be very stable and did not show indications of C—H-activation and other kinds of disintegration in benzene or toluene solution even upon prolonged heating at 60 °C. The reaction of complex 4 with an equimolar amount of 2,6-diisopropylaniline in toluene solution at room temperature led to the formation of the lutetium alkyl-anilide complex (L²)Lu(CH₂SiMe₃)(NH-2,6-Pr ₂ ⁱ C₆H₃) (5). A three-component system 4—AlBu ₃ ⁱ —[X][B(C₆F₅)₄] ([X] = [Ph₃C], [PhNHMe₂], the molar ratio of 1: 10: 1) was found to catalyze polymerization of isoprene.     

Aluminium alkyl complexes supported by [OSSO] type bisphenolato ligands: synthesis, characterization and living polymerization of rac-lactide

Aluminium alkyl complexes [(OSSO)AlR](1-3: R = Me, Et) were isolated in good yields from the protonolysis reaction of AlR3 with the corresponding tetradentate 1,omega-dithiaalkanediyl-bridged bisphenols (1,4-dithiabutanediyl-bis(6-tert-butyl-4-methylphenol), etbmpH2; ortho-xylylenedithio-bis(6-tert-butyl-4-methylphenol), xytbmpH2). The monomeric structures of all three complexes were confirmed by X-ray diffraction studies. Complexes 1 and 2 have an isotypic packing arrangement. The aluminium center is coordinated by the etbmp ligand and one alkyl group with distorted trigonal bipyramidal geometry. Complex 3 shows Cs symmetry with square pyramidal geometry around the metal center. Substitution reaction of complex 1 with trityl alcohol gave the monomeric alkoxide complex [(etbmp)Al(OCPh3)] 4, which has a similar trigonal bipyramidal geometry around the aluminium atom as complex 1. In the presence of isopropanol, complexes 1-3 initiated the living ring-opening polymerization of rac-lactide (PDI = 1.03-1.06, Mw/Mn). The ligand structure influenced the tacticity of the obtained polymer, with complex 3 giving heterotactic-enriched polylactides.     

Bimetallic aluminum complexes supported by bis(salicylaldimine) ligand: Synthesis,characterization and ring-opening polymerization of lactide

Two types of bifunctional bis(salicylaldimine) ligands (syn-L and anti-L) were designed and synthesized to support bimetallic aluminum complexes.Owing to the rigid anthracene skeleton,syn-L and anti-L successfully locked two Al centers in close proximity (syn-Al2) and far apart (anti-Al2),respectively.The distance between two Al centers in syn-Al2 was defined by X-ray diffraction as 6.665 (A),which is far shorter than that in anti-Al2.In the presence of stoichiometrical BnOH,syn-Al2 and anti-Al2 were both efficient for ring-opening polymerization (ROP) of rac-LA with the former being more active.In the presence of excess BnOH,syn-Al2 showed an efficient and immortal feature,consistent with high conversions,matched Mns,narrow molecular weight distributions and end group fidelity,while anti-Al2 had a much lower activity or even became entirely inactive due to rapid decomposition,indicated by in situ 1H-NMR experiments of A1 complexes with BnOH.     

Titanium complexes supported by an [OSSO]-type bis(phenolato) ligand based on a trans-cyclooctanediyl platform: synthesis, structures, and 1-hexene polymerization

trans-Cyclooctanediyl-bridged [OSSO]-type ligand 4 reacts with TiCl(4)(thf)(2) in toluene to produce the corresponding titanium(IV) dichloro complexes as an inseparable mixture of cis-α isomer 6a and cis-β isomer 6b in a ratio of 2:1, whereas treatment of dilithio salt of 4 with TiCl(3)(thf)(3) in Et(2)O afforded chloride-bridged dimeric titanium(III) complex 8, which indicated the antiferromagnetic character in a nonpolar solvent solution. Di(isopropoxy) titanium(IV) complex 10 having a C(2)-symmetric cis-α configuration was synthesized by the reaction of 4 with Ti(O(i)Pr)(4) in toluene as yellow crystals. Moreover, the reaction of 4 with Ti(NEt(2))(4) in toluene resulted in the unexpected formation of [OSSO]-type bis(phenolato)-bridged dinuclear diamido titanium(IV) complex 11, which adopted a distorted tetrahedral geometry on the titanium center. These titanium complexes were characterized on the basis of their NMR spectroscopic data, and the molecular structures of complexes 8, 10, and 11 were established by single crystal X-ray diffraction. The titanium(IV) and (III) complexes 6 and 8 upon activation with a cocatalyst in toluene polymerized 1-hexene isospecifically to produce poly(1-hexene) having high molecular weight (M(w) = 22,000-52,000 g mol(-1)) and relatively narrow polydispersity (M(w)/M(n) = 1.7-1.8), albeit with low activity [0.27-1.0 g mmol(cat)(-1) h(-1)].     

Homoleptic lanthanide complexes of chelating bis(phosphanyl)amides: synthesis,structure, and ring-opening polymerization of lactones

Treatment of the bis(phosphanyl)amide (Ph2P)2NH with KH in boiling THF followed by crystallization from THF/n-pentane leads to [K(thf)n][N(PPh2)2] (n = 1.25, 1.5). Reaction of [K(thf)n][N(PPh2)2] with anhydrous yttrium or lanthanide trichlorides in a 3:1 molar ratio afforded homoleptic bis(phosphanyl)amide complexes [Ln[N(PPh2)2]3] (Ln = Y, Er) as large crystals in good yields. [Ln[N(PPh2)2]3] can also be obtained by reaction of the homoleptic bis(trimethylsilyl)amides of Group 3 metals and lanthanides [Ln[N(SiMe3)2]3] (Ln = Y, La, Nd) with three equivalents of (Ph2P)2NH in boiling toluene. The single-crystal X-ray structures of these complexes always show eta 2 coordination of the ligand. Dynamic behavior of the ligand is observed in solution and is caused by rapid exchange of the two different phosphorus atoms. [Ln[N(PPh2)2]3] was used as catalyst for the polymerization of epsilon-caprolactone. Significant differences in terms of correlation of theoretical and experimental molecular weights as well as polydispersities were observed depending on the nature of Ln. On the basis of the crystal structure of the heteroleptic complex [Lu[N(PPh2)2]3(thf)], we suggest that in the initiation step of epsilon-caprolactone polymerization the lactone adds to the lanthanide atom to form a sevenfold coordination sphere around the central atom.     

Zinc bis-Schiff base complexes: Synthesis,structure, and application in ring-opening polymerization of rac-lactide

A series of bis-ligated zinc complexes supported by Schiff base ligands were successfully synthesized and characterized by ¹H,¹³C NMR,elemental analysis,and X-ray crystallography.These zinc complexes can be used as catalysts for the polymerization of rac-lactide in solution as well as in molten lactide.The results show that all catalysts exhibited high catalytic activity and obtained moderate heterotactic PLAs with the expected molecular weight.Complex 1 can catalyze the polymerization of rac-lactide under controllable conditions with living and immortal character in toluene solution.In addition,the steric hindrance and electronic effects has a great influence on the catalytic activity and selectivity of catalysts.     

Lanthanide borohydride complexes supported by diaminobis(phenoxide) ligands for the polymerization of epsilon-caprolactone and L- and rac-lactide

Reaction of Na2O2NN' [H2O2NN' = (2-C5H4N)CH2N[2-HO-3,5-C6H2(t)Bu2]2] with M(BH4)3(THF)3 afforded the dimeric, rare-earth borohydride compounds [M(O2NN')(mu-BH4)(THF)n]2 [M = Y(III), n = 0.5 (1-Y); M = NdIII, n = 1 (1-Nd); M = SmIII, n = 0 (1-Sm)]. For comparison the chloride analogues [M(O2NN')(mu-Cl)(THF)n]2 (2-M; M = La(III) or Sm(III), n = 0; M = Nd(III), n = 1) and the corresponding pyridine adducts [M(O2NN')(mu-X)(py)]2 [X = BH4 (3-M) or Cl (4-M); M = La(III), Nd(III), or Sm(III)] were prepared and structurally characterized for 4-La. Compounds 1-M initiated the ring-opening polymerization of epsilon-caprolactone. The best molecular weight control (suppression of chain transfer) for all three monomers was found for the samarium system 1-Sm. The most effective heterotactic enrichment (Pr) in the polymerization of rac-lactide was found for 1-Y (P(r) = 87%). Compound 1-Nd catalyzed the block copolymerization of epsilon-caprolactone and L- and rac-lactide provided that epsilon-caprolactone was added first. Attempted block polymerization by the addition of L-lactide first, or random copolymerization of a ca. 1:1 mixture of epsilon-caprolactone and L-lactide, gave only a poly(L-lactide) homopolymer.     

Cationic rare-earth metal bis(tetrahydridoborato) complexes: direct synthesis, structure and ring-opening polymerisation activity toward cyclic esters

Rare-earth metal tris(borohydrides) [Ln(BH4)3(thf)3] (Ln = Y, La, Nd, Sm) are converted with one equivalent of the Br?nsted acid [NEt3H]+[BPh4]- in thf into the monocationic bis(borohydride) complexes [Ln(BH4)2(thf)5]+[BPh4]-. They efficiently initiate the ring-opening polymerisation of epsilon-caprolactone.     

Lithium complexes supported by tripodal diaminebis(aryloxido) ligands: synthesis and structure

The diaminebis(aryloxido) ligand precursors H(2)L(1) and H(2)L(2) [H(2)L(1) = Me(2)NCH(2)CH(2)N(CH(2)-4-CMe(2)CH(2)CMe(3)-C(6)H(3)OH)(2); H(2)L(2) = Me(2)NCH(2)CH(2)N(CH(2)-4-Me-C(6)H(3)OH)(2)] were synthesized by a straightforward single-step Mannich condensation. Their reactions with 2 molar equivalents of MeLi in thf afforded [Li(4)(μ-L-κ(4)O,N,N,O)(2)(thf)(2)] (1a, L(1); 1b, L(2)) and unexpectedly small amounts (～9%) of [Li(6)(μ-L-κ(4)O,N,N,O)(2)(μ(3)-Cl)(2)(thf)(4)]·thf (2a·thf; L(1); 2b·thf, L(2)). Stoichiometric reactions of LiCl, MeLi and ligand precursors H(2)L led to the formation of 2a and 2b in high yield (～80%). All compounds were characterized by chemical and physical techniques including X-ray crystallography for H(2)L(1), H(2)L(2), 1b, 2a and 2b.     

Zinc(II) silsesquioxane complexes and their application for the ring-opening polymerization of rac-lactide

In this Communication, we report the unprecedented solid-state structures for a series of zinc(II) silsesquioxane complexes. Initial catalytic data for the ring-opening polymerization of rac-lactide are also presented together with analogous heterogeneous species.     

Rare-earth metal allyl and hydrido complexes supported by an (NNNN)-type macrocyclic ligand: synthesis, structure, and reactivity toward biomass-derived furanics

The preparation and characterization of a series of neutral rare‐earth metal complexes [Ln(Me₃TACD)(η³‐C₃H₅)₂] (Ln=Y, La, Ce, Pr, Nd, Sm) supported by the 1,4,7‐trimethyl‐1,4,7,10‐tetraazacyclododecane anion (Me₃TACD^?) are reported. Upon treatment of the neutral allyl complexes [Ln(Me₃TACD)(η³‐C₃H₅)₂] with Brønsted acids, monocationic allyl complexes [Ln(Me₃TACD)(η³‐C₃H₅)(thf)₂][B(C₆X₅)₄] (Ln=La, Ce, Nd, X=H, F) were isolated and characterized. Hydrogenolysis gave the hydride complexes [Ln(Me₃TACD)H₂]_n (Ln=Y, n=3; La, n=4; Sm). X‐ray crystallography showed the lanthanum hydride to be tetranuclear. Reactivity studies of [Ln(Me₃TACD)R₂]_n (R=η³‐C₃H₅, n=0; R=H, n=3,4) towards furan derivatives includes hydrosilylation and deoxygenation under ring‐opening conditions.     

Lithium complexes supported by amine bis-phenolate ligands as efficient catalysts for ring-opening polymerization of L-lactide

Lithium complexes bearing dianionic amine bis(phenolate) ligands are described. Reactions of ligand precursors H(2)O(2)NN(Me), H(2)O(2)NN(Py) or H(2)O(2)NO(Me) [H(2)O(2)NN(Me)=Me(2)NCH(2)CH(2)N-(CH(2)-2-HO-3,5-C(6)H(2)((t)Bu)(2))(2); H(2)O(2)NN(Py)=(2-C(5)H(4)N)CH(2)N-(CH(2)-2-HO-3,5-C(6)H(2)((t)Bu)(2))(2); H(2)O(2)NO(Me)=MeOCH(2)CH(2)N-(CH(2)-2-HO-3,5-C(6)H(2)((t)Bu)(2))(2)] with 2.2 molar equivalents of (n)BuLi in diethylether afford (Li(2)O(2)NN(Me))(2) (1), (Li(2)O(2)NN(Py))(2) (2) and (Li(2)O(2)NO(Me))(2) (3) as tetra-nuclear lithium complexes. The crystalline solids of partially hydrolyzed product, (LiO(HO)NN(Py)) (4), were obtained from recrystallization of 2 in diethylether solution for three months. The synthesis of (LiO(HO)NO(Me))(2) (5) was carried out at ambient temperature by carefully layering a solution of water in hexane on top of a solution of 3 in Et(2)O. Crystalline solids of were obtained after two months. Molecular structures are reported for compounds 1, 3, 4 and 5. Compounds 1-3 show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Novel lanthanide(II) complexes supported by carbon-bridged biphenolate ligands: synthesis, structure and catalytic activity

[Ln[N(SiMe3)2]2(THF)2](Ln = Sm, Yb) reacts with 1 equiv. of carbon-bridged biphenols, 2,2'-methylene-bis(6-tert-butyl-4-methylphenol)(L1H2) or 2,2'-ethylidene-bis(4,6-di-tert-butylphenol)(L2H2), in toluene to give the novel aryloxide lanthanide(II) complexes [[LnL1(THF)n]2](Ln = Sm, n = 3 (1); Ln = Yb, n = 2 (2)) and [[LnL2(THF)3]2](Ln = Sm (5); Ln = Yb (6)) in quantitative yield, respectively. Addition of 2 equiv. of hexamethylphosphoric triamide (HMPA) to a tetrahydrofuran (THF) solution of 1, 2 and 5 affords the corresponding HMPA-coordinated complexes, [[LnL1(THF)m(HMPA)n]2(THF)y](Ln = Sm, n = 2, m = 0, y = 2 (3); Ln = Yb, m = 1, n = 1, y = 6 (4)) and [[SmL2(HMPA)2]2](7) in excellent yields. The single-crystal structural analyses of 3, 4 and 7 revealed that these aryloxide lanthanide(II) complexes are dimeric with two Ln-O bridges. The coordination geometry of each lanthanide metal can be best described as a distorted trigonal bipyramid. Complexes 1-3, 5 and 7 can catalyze the ring-opening polymerization of epsilon-caprolactone (epsilon-CL), and 1-3, along with 5 show moderate activity for the ring-opening polymerization of 2,2-dimethyltrimethylene carbonate (DTC) and the copolymerization of epsilon-CL and DTC to give random copolymers with high molecular weights and relatively narrow molecular weight distributions..     

Chromium(III) complexes bearing bis(benzotriazolyl)pyridine ligands: synthesis,characterization and ethylene polymerization behavior

Reaction of benzotriazole with 2,6-bis(bromomethyl)pyridine and 2,6-pyridinedicarbonyl dichloride yields the tridentate ligands 2,6-bis(benzotriazol-1-ylmethyl)pyridine (1) and 2,6-bis(benzotriazol-1-ylcarbonyl) pyridine (2). The molecular structures of the ligands were determined by single-crystal X-ray diffraction. These ligands react with CrCl₃(THF)₃ in THF to form neutral complexes, [CrCl₃{2,6-bis(benzotriazolyl)pyridine-N,N,N}] (3, 4), which are isolated in high yields as air stable green solids and characterized by mass spectra (ESI), FTIR spectroscopy, UV–Visible, thermogravimetric analysis (TGA), and magnetic measurements. After reaction with methylaluminoxane (MAO), the chromium(III) complexes are active in the polymerization of ethylene showing a bimodal molecular weight distribution. A DFT computational investigation of the polymerization reaction mechanism shows that the most likely reaction pathway originates from the mer configuration when the spacer is CH₂ (complex 3) and from the fac configuration when the spacer is CO (complex 4).