Investigation of dehydration process,II

The dehydration of hydrated calcium and strontium bromides and iodides was studied by thermogravimetry and differential thermal analysis. The melting in the crystallization water was distinguished from the dehydration in a self-generated atmosphere. The results of the TG and DTA curves made simultaneously were verified by measurements with a Du Pont DSC apparatus. This latter investigation was extended to the previously studied chlorides too. Correlations were found between the temperature of melting or of dehydration and the ionic radii of the respective cations and anions.

---

Zusammenfassung Die Dehydratisierung von Calcium- und Strontium-Bromid- und Jodidhydraten wurde mit den Methoden der Thermogravimetrie und Differentialthermoanalyse verfolgt. Das Schmelzen im Kristallwasser wurde von der Dehydratisierung in der selbsterzeugten Atmosphäre getrennt. Die Ergebnisse der simultan erhaltenen TG- und DTA-Kurven wurden durch Messungen mit einem Du Pont DSC-Gerät bestätigt, wobei die bereits schon untersuchten Chloride mit einbezogen wurden. Korrelationen zwischen den Schmelzoder Dehydratisierungstemperaturen und den Ionenradien der entsprechenden Kationen und Anionen werden beschrieben.

---

Résumé Etude de la déshydratation des bromures et iodures de calcium et de Strontium hydratés par thermogravimétrie et par analyse thermique différentielle. La fusion dans l'eau de cristallisation a été distinguée de la déshydratation en atmosphère auto-générée. Les résultats des courbes TG et ATD obtenues simultanément ont été vérifiés par des mesures effectuées à l'aide d'un analyseur calorimétrique différentiel (DSC) Du Pont. L'étude a également été étendue aux chlorures précédemment étudiés. On propose des corrélations entre les températures de fusion ou de déshydratation et les rayons ioniques des cations et anions respectifs.

---

, . . . . .

     

Isothermal dimensional changes of some dental materials

The isothermal dimensional changes of four types of dental amalgams during the setting and for the next 24 hours after condensation have been studied by means of a Heraeus TA 500 thermal analysis system. The four types of dental amalgams were the lathe-cut conventional lowcopper amalgam (Amalcap), the spherical conventional low-copper amalgam (Spheralloy), the ternary unicomposition high-copper amalgam (Sybralloy) and the admixed high-copper (Dispersalloy) amalgam.The dimensional changes of the four types of amalgams are explained on the basis of their particle sizes and shapes and their constitutions.

---

Zusammenfassung Mittels eines Heraeus TA 500 Thermoanalysensystemes wurden isotherme Größenveränderungen von Dentalamalgamen während des Setting und der 24 Stunden nach der Kondensation untersucht. Die Größenveränderungen der vier Amalgamgrundtypen (am Beispiel von Amalcap, Spheralloy, Sybralloy und Dispersalloy) wurden auf der Grundlage ihrer Teilchengröße und -form sowie auf der Grundlage ihrer Zusammensetzung erklärt.

---

500 24 . : (), (), () ( ). , .

     

Identification and biological activity of the volatile organic substances emitted by plants and insects II. Sesquiterpene composition of the native scent of leaves of the potatoSolanum tuberosum

By dynamic gas extraction of the volatile components of the native scent of the leaves of the potatoSolanum tuberosum L. growing under natural conditions, followed by the gas-chromatographic separation and massspectrometric analysis of the substances obtained, the following sesquiterpene compounds have been identified:trans-andcis-caryophyllenes, -ylangene, -copaene, -bourbonene, -elemene, Z--farnesene, aromadendrene, -humulene, -elemene, -bisabolene, -cadinene, and -cadinene.Institute of Petrochemistry and Catalysis, Academy of Sciences of the Republic of Bashkortostan, and Ufa Scientific Center, Russian Academy of Sciences. Ufa-450075, Prospekt Oktyabrya, 141, tel./fax 7+(3472) 312750; ink@anrb.ru. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 472–477, July–August, 1999.     

Immobilized sol of cobalt(III) hydroxide as an efficient catalyst of water oxidation to dioxygen by the Ru(bpy)33+ complex

Catalysts of water oxidation to dioxygen by Ru(bpy) ₃ ³⁺ have been obtained by immobilization of colloidal Co(III) hydroxide on supports of the hydroxide types. These supports are found to be able either to enhance (Al(III), Bi(III), Sn(IV) and Ce(IV) hydroxides) or to weaken (Fe(III) and Mn(IV) hydroxides) the catalytic efficiency of the initial sol. The possible nature of the influence of the support is discussed.

---

Ru(bpy) ₃ ³⁺ Co(III). - , ( Al(III), Bi(III), Sn(IV), Ce(IV)), ( Fe(III), Mn(IV)) . .

     

Effect of catalyst surface modification on pentachlorobutene-1 oxidation to dichloromaleic anhydride

Modification of V–P–O catalyst surface by reaction products changes the reaction course and increases its catalytic activity in pentachlorobutene-1 oxidation to dichloromaleic anhydride.

---

V–P–O . -1 .

     

Comparison of various semiempirical MO LCAO methods

In an orthogonalized basis, the diagonal element F of the Fock operator, for a number of semiempirical MO LCAO methods, can be represented by a trinomial which is quadratic with respect to the Mulliken charge. The coefficients differ for different methods, depending on the manner in which the interelectronic interaction is taken into account. From a study, in general form, of the influence of change in the coefficients of the trinomial F on the bond order matrix, an explanation has been given for certain familiar calculation results: the equalization of the -charges on going from the Hückel method to the more advanced techniques, and the decrease in the covalent character of metal-ligand bonds when allowance is made for the interelectronic interaction in the calculations for complexes.In conclusion, we wish to thank V. D. Sutula and L. I. Chernyavskii for much valuable discussion.     

Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments

Highly crystalline I-rich type Cladophora cellulose, which had been kept in never-dried condition, was treated in 60wt% sulfuric acid at 100°C, for 1–48h. The cellulose microcrystals thus obtained were analysed by X-ray diffractometry, FT-IR, and transmission electron microscopy. The I component was found to be more degraded than the I component. The cellulose I/I ratios of the samples acid-treated for 0, 24, and 48 h were about 8:2, 6:4, and 4:6, respectively. After the acid treatment, the microcrystals became narrower in width, and very sharp at their ends. These results indicate that the I phase is mostly located at the surface of the microcrystals, which is morphologically more susceptible to the acid treatment.     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.     

Effects of pH and Dye Concentration on the Optical and Structural Properties of Coumarin-4 Dye-Doped SiO2-PDMS Xerogels

Optical and structural properties of coumarin-4 dye-doped SiO₂-PDMS xerogels synthesized by acid catalyzed (one-step) and acid-base catalyzed (two-step) sol-gel routes with varying pH (0.6 to 7) and dye content ( 5 × 10^–4 to 5 × 10^–2 mole) are reported. Spectroscopic methods such as photo-luminescence, FT-IR and FT-Raman were used for characterizations. The acid catalyzed xerogels prepared with pH < 2.5 exhibited two fluorescence peaks, I at 390 nm and II at 480 nm. The acid-base catalyzed xerogels synthesized with pH < 2.5 also exhibited two peaks, I at 400 nm and II at 475 nm. Peak II was not observed for the samples with pH 2.5. This phenomenon was attributed to the existence of pH dependent different forms of coumarin-4 molecule. The concentration-quenching phenomenon was observed for the acid catalyzed xerogels prepared with different dye concentration. TheFT-IR spectra indicated the existence of hydrogen bonds between the carbonyl groups of dye molecules and the silanol groups of gel matrix. The hydrogen bonding was the highest for the samples with the extremity pH, 0.6 and 7, resulting in the highest dye/gel matrix interactions, hence, the highest fluorescence peaks. The Raman studies indicated that the samples prepared with pH < 2.5 possessed relatively more number of 3-membered siloxane rings than 4-membered siloxane rings. The ring statistics was reversed for the samples with pH > 2.5. The number of silanol groups was higher for the samples with pH > 2.5.     

Reaction of arylidene-2-naphthylamines with the ethyl ester of (2-quinolyl)-β-oxopropionic acid

The reaction of arylidene-2-naphthylamines with the ethyl ester of (2-quinolyl)--oxopropionic acid results in the synthesis of ethyl esters of 1-(2-quinolyl)-3-arylbenzo[f]quinoline-2-carboxylic acids. All the theoretically possible intermediate reaction products were isolated: the amino esters of 2-quinoline--oxopropionic acid, the hydroxy esters of tetrahydro- and esters of dihydrobenzo[f]quinoline-2-carboxylic acid, as well as the by-products — the ethyl ester of 2-quinolyl--(R-benzylidene)--oxopropionic acid. The IR, UV, and mass spectra of the synthesized compounds are discussed.Institute of Physical Organic Chemistry, Belorussian Academy of Sciences, Minsk 220603. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1406–1410, October, 1994. Original article submitted October 5, 1994.     

In-line determination of U,Pu and Np in process streams by energy-dispersive X-ray fluorescence analysis (EDXRF)

A -ray source of 300 keV was used in order to excite the fluorescent K-radiation of the heavy elements which is only weakly absorbed in the walls of metal tubes. Thus, uranium can be determined quantitatively in solutions within tubes in the concentration range form 5 mg/l to 100 g/l. The influences of the energy and the activity of the radiation source, the geometrical arrangement, the thickness of the wall and the wall material have been investigated.     

Thermoanalytical investigations of silicone caoutchouc polymers and silicone rubbers,I

The investigations proved that isothermal thermogravimetry yields useful information on the thermal stability of silicone caoutchouc and silicone rubber. It was established that the thermal degradation is a first-order reaction. Measurements and calculations verified that in multicomponent systems the resultant degradation curve obtained by isothermal measurements is formed additively from the degradation curves of the components, i.e. the thermal decompositions of the components proceed independently of one another.

---

Zusammenfassung Die isotherme Thermogravimetrie liefert nützliche Informationen über die thermische Stabilität von Silkonkautschuk und Silikongummi. Der thermische Abbau verläuft nach einer Reaktion erster Ordnung. Messungen und Berechnungen haben bestätigt, daß in Vielkomponentensystemen die resultierende isotherme Zersetzungskurve sich additiv aus den Zersetzungskurven der Komponenten zusammensetzt, d. h., daß die thermische Zersetzung der Komponenten unabhängig voneinander verläuft.

---

, . . , , , , . . .

     

Comparative analysis of purity determination methods using a differential scanning calorimeter

Comparative analysis of several methods for purity determination using DSC is presented. This is based on a mathematical model including the construction of theoretical melting curves for two-component systems and the calculation of recorded melting curves with the help of a set of equations describing the formation of a DSC output signal. It is shown that the true accuracy of purity determinations in the range of impurity concentrations ¯x=0.005–0.02 does not exceed 30–50%.

---

Zusammenfassung Eine Vergleichende Analyse verschiedener Methoden zur Reinheitsbestimmung mittels DSC wurde ausgeführt. Diese basiert auf einem mathematischen System, daß die Konstruktion theoretischer Schmelzkurven für Zweikomponentensysteme und die Berechnung von registrierten Schmelzkurven mit Hilfe einer Reihe die Ausbildung des DSC-Signals beschreibenden Gleichungen in sich einschließt. Es wird gezeigt, daß die Genauigkeit der Reinheitsbestimmungen bei Konzentrationen der Verunreinigungen von ¯X₂=0.005–0.02 30–50% nicht überschreitet.

---

, , . , 0,005-0,02 30–50%.

     

51V NMR studies of a system vanadium pentoxide-potassium pyrosulfate

Two states of pentavalent vanadium in the system K₂S₂O₇–V₂O₅ have been found by the⁵¹V NMR method. For state 1 a polynuclear structure with greater distorted local environment compared with V₂O₅ is retained. For state 2 the nearest environment of vanadium differs significantly from V₂O₅, and is probably characterized by the higher ionic nature of the vanadium-oxygen bond.

---

⁵¹V K₂S₂O₇–V₂O₅ . V₂O₅. , V₂O₅ , , -.

     

IR spectroscopic determination of protonation heats of bases on catalyst surfaces

IR spectra of pyridine adsorbed on zirconium phosphate and zeolite HNaY were studied at temperatures of 400–500 K. Protonation heats of pyridine determined on the OH groups of zirconium phosphate and zeolite HNaY having theOH at 3640 cm^–1, are 65±6.0 and 172±16 kJ/mol, respectively.

---

400–500 K , HNaY. OH (Q=65±6, /) OH HNaY cOH 3640 ^–1 (Q=172±16 /).

     

Hydrogenation of CO on thoria supported group VIII (Pd, Pt, Ir) metal catalysts

Comparative studies of the transformation of CO/H₂ mixtures on Pd supported (MgO, Al₂O₃, ThO₂) catalysts reveal the promoting effect of thoria, particularly towards hydrocarbon products.

---

CO/H₂ Pd MgO, Al₂O₃ ThO₂ ThO₂, .

     

Decomposition of N2O over CuxMg1?xAl2O4 catalysts

The results show that there is not difference between the catalytic activities of two series of Cu_xMg_1–xAl₂O₄ catalysts, despite a small but significant difference in cation distribution. The activity is mainly affected by the presence of CuO.

---

, , , , - Cu_XMg_1–XAl₂O₄. CuO.

     

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (SPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA. The percentage recovery improved from 0 to 40% when the OTA sample solution was acidified with 1 M HCl (1% by volume). At a flow rate of 0.2 mL/min, maximum OTA binding was reached in 6 min after a total loading of 3.2 ng OTA. Final elution of the OTA was analyzed by high performance liquid chromatography (HPLC) with fluorescence detection, using 20:80 v/v acetonitrile–ammonia buffer (NH₄Cl/NH₃, 20 mM, pH 9.2) as the mobile phase. The MIPPy-SPP-HPLC results clearly demonstrated that the MIPPy-SPP device afforded selective preconcentration of OTA from red wine samples, at OTA concentration levels as low as 0.05 ppb, prior to HPLC analysis.     

Kinetics and mechanism of the copper(II) catalyzed oxidation of N-substituted p-phenylenediamines by 2,3,9,10-tetramethyl-1,4,5,7,8,11,12,14-octaazacyclotetradeca-1,3,8,10-tetraenecopper(II)

The kinetics of oxidation of N,N-dimethyl- and N,N,N,N-tetramethyl-p-phenylenediamines, to the corresponding semiquinonediimine radical and the quinonediimine, with a macrocyclic copper(II)-complex were studied at pH7. Under pseudo-first order conditions, the reaction rate for the N,N,N,N-tetramethyl derivative was much faster than for N,N-dimethyl-p-phenylenediamine, due to the increased probability of electron transfer. The reaction rate decreases with increasing acidity of the medium as a result of protonation of the amine nitrogen atoms. The rate constants and activation parameters were evaluated and the reaction was found to be enthalpy controlled. Furthermore, kinetic measurements revealed a remarkable superadditive effect when CuCl₂ solution was added, even at concentrations lower than that of the copper complex. This observation was used for the kinetic determination of copper ions at concentrations <10^–5M.