The role of mineral surface chemistry in modified dextrin adsorption

The adsorption of two modified dextrins (phenyl succinate dextrin--PS Dextrin; styrene oxide dextrin--SO Dextrin) on four different mineral surfaces has been studied using X-ray photoelectron spectroscopy (XPS), in situ atomic force microscopy (AFM) imaging, and captive bubble contact angle measurements. The four surfaces include highly orientated pyrolytic graphite (HOPG), freshly cleaved synthetic sphalerite (ZnS), and two surfaces produced through surface reactions of sphalerite: one oxidized in alkaline solution (pH 9, 1 h immersion); and one subjected to metal ion exchange between copper and zinc (i.e. copper activation: exposed to 1×10(-3) M CuSO(4) solution for 1 h). XPS measurements indicate that the different sphalerite surfaces contain varying amounts of sulfur, zinc, oxygen, and copper, producing substrates for polymer adsorption with a range of possible binding sites. AFM imaging has shown that the two polymers adsorb to a similar extent on HOPG, and that the two polymers display very different propensities for adsorption on the three sphalerite surface types, with freshly cleaved sphalerite encouraging the least adsorption, and copper activated and oxidized sphalerite encouraging significantly more adsorption. Contact angle measurements of the four surfaces indicate that synthetic sphalerite has a low contact angle upon fracture, and that oxidation on the timescale of one hour substantially alters the hydrophobicity. HOPG and copper-activated sphalerite were the most hydrophobic, as expected due to the carbon and di/poly-sulfide rich surfaces of the two samples, respectively. SO Dextrin is seen to have a significant impact on the wettability of HOPG and the surface reacted sphalerite samples, highlighting the difficulty in selectively separating sphalerite from carbonaceous unwanted minerals in flotation. PS Dextrin has the least effect on the hydrophobicity of the reacted sphalerite surfaces, whilst still significantly increasing the wettability of graphite, and thus has more potential for use as a polymer depressant in this separation.     

Development of a HPLC method for determination of four UV filters in sunscreen and its application to skin penetration studies

This study describes the development, validation and application of a high‐performance liquid chromatography (HPLC) method for the simultaneous determination of the in vitro skin penetration profile of four UV filters on porcine skin. Experiments were carried out on a gel‐cream formulation containing the following UV filters: diethylamino hydroxybenzoyl hexyl benzoate (DHHB), bis‐ ethylhexyloxyphenol methoxyphenyl triazine (BEMT), methylene bis‐ benzotriazolyl tetramethylbutylphenol (MBBT) and ethylhexyl triazone (EHT). The HPLC method demonstrated suitable selectivity, linearity (10.0–50.0 μg/mL), precision, accuracy and recovery from porcine skin and sunscreen formulation. The in vitro skin penetration profile was evaluated using Franz vertical diffusion cells for 24 h after application on porcine ear skin. None of the UV filters penetrated the porcine skin. Most of them stayed on the skin surface (>90%) and only BEMT, EHT and DHHB reached the dermis plus epidermis layer. These results are in agreement with previous results in the literature. Therefore, the analytical method was useful to evaluate the in vitro skin penetration of the UV filters and may help the development of safer and effective sunscreen products.     

An improved algorithm for satellite-derived UV radiations

The improved algorithm surface irradiance derived from a range of satellite-based sensors (SIDES) is presented in this article. It calculates various types of surface UV intensities, such as biologically weighted or unweighted UV spectra, integrated doses or irradiance at specific wavelengths, using data from satellite instruments. These surface UV data are mainly useful for environmental impact or process studies where high accuracy or a high temporal resolution is required. In contrast to several previous studies, SIDES has been validated with spectral measurements. By this method an averaging of positive or negative deviations over the complete wavelength range is avoided. This is especially important for UV wavelengths around 300 nm where biological effectiveness is highest. The results of SIDES deviate less than 7% from ground-based observations for wavelengths between 295 and 400 nm. In contrast, the corresponding deviations of the joint research center algorithm escalate for shorter wavelengths, reaching 35% at 295 nm. This large deviation is due to an inaccurate interpolation procedure that has been detected by spectral analysis. Thus, spectral validation is demonstrated to be an appropriate tool to detect weaknesses in such an algorithm and provides information essential for improvement.     

The effect of UV absorbing sunscreens on the reflectance and the consequent protection of skin

The in vivo reflectance spectra of Caucasian skin, coated with preparations containing sunscreen vehicle, vehicle with olive oil and vehicle with the UVB and UVA absorbers 2-ethylhexyl-4-methoxycinnamate and 4-t-butyl-4'-methoxydibenzoylmethane were determined. All preparations reduced the reflectance of skin throughout the UVA spectral range (320 to 400 nm), with the sunscreen preparations containing the UVB and UVB plus UVA absorbers reducing the reflectance more than the sunscreen vehicle alone. This phenomenon, which facilitates the penetration of UV radiation to the lower epidermis and dermal layers of skin and therefore lessens sunscreen efficacy, is attributed to optical coupling mediated by refractive index matching of the sunscreen to the upper epidermis. The greater reduction in skin diffuse reflectance caused by sunscreens containing methoxycinnamate is associated with this compound's high refractive index. Also, by determining the excitation spectra of the autofluorescence originating from the dermal layer of skin, the transmission spectra of the various components of sunscreen on skin were established, and these were in good general agreement with previously published spectra.     

UV radiation and skin cancer in Norway

A distinct increase in skin cancer incidences is observed since the registration started in Norway in the 1950s. As UV radiation is assumed to be the main risk factor for skin cancer, hourly values of the UV irradiance were reconstructed for the period 1957–2005 for 17 of the Norwegian counties (58–70°N). For reconstruction, a radiation transfer model is run with total ozone amount and cloud information as meteorological input. Reconstructed hourly erythemally weighted UV irradiances for about 5 years are compared to measurements at four stations, two stations representing the north–south extension of Norway, and two stations at about 60°N representing the eastern inland – Western coastal contrasts. The agreement between reconstructed and measured UV varies between 0% for the northernmost site to 10–15% overestimation for the other locations. For clear sky, a reasonable agreement between reconstructed and measured data was found for all stations, while for overcast, an overestimation of 10–20% was found for all but the northernmost station. Both the cancer incidences and the reconstructed UV values have a distinct north–south increase. The UV increase towards south is mostly due to increasing solar elevation. The west to east increase is much smaller, and differences in UV are due to differences in both cloud optical thickness and total cloud amount. One additional outcome from this work is that long-term UV-data are reconstructed for Norway, data that can be used in further biological and medical studies related to UV effects.     

Pristine and BN doped graphyne derivatives for UV light protection

This report aims to explore the possibility of using graphyne derivatives as UV‐light protector. Boron (B) and nitrogen (N) atoms are systematically substituted into the structures, and we find that BN‐substituted analogs exhibit distinct characteristics compared with their parent two‐dimensional structure. Due to the presence of BN at different sites, the optical band gap is tuned from infrared to UV via visible region depending on substitution sites. These findings will lead the way to utilize these BN doped structures in various optoelectronic applications such as in hybrid solar cell, electroluminescence cell, light emitting cell, and as selective electromagnetic radiation absorber. The origin of this tunable optical response and band gap is explained in the light of partial density of states analysis and electron density distribution. The presence of strong absorption peak in UV region indicates that these materials may be used as an excellent candidate for UV light protection. © 2015 Wiley Periodicals, Inc.     

Optimizing UV laser focus profiles for improved MALDI performance

Matrix assisted laser desorption/ionization (MALDI) applications, such as proteomics, genomics, clinical profiling and MALDI imaging, have created a growing demand for faster instrumentation. Since the commonly used nitrogen lasers have throughput and life span limitations, diode-pumped solid-state lasers are an alternative. Unfortunately this type of laser shows clear performance limitations in MALDI in terms of sensitivity, resolution and ease of use, for applications such as thin-layer sample preparations, acceptance of various matrices (e.g. DHB for glycopeptides) and MALDI imaging. While it is obvious that the MALDI process has some dependence on the characteristics of the laser used, it is unclear which features are the most critical in determining laser performance for MALDI. In this paper we show, for the first time, that a spatially structured laser beam profile in lieu of a Gaussian profile is of striking importance. This result enabled us to design diode-pumped Nd : YAG lasers that on various critical applications perform as well for MALDI as the nitrogen lasers and in some respects even better. The modulation of the beam profile appears to be a new parameter for optimizing the MALDI process. In addition, the results trigger new questions directing us to a better understanding of the MALDI process.     

Development and validation of HPLC method for imiquimod determination in skin penetration studies

A simple, rapid and sensitive analytical procedure for the measurement of imiquimod in skin samples after in vitro penetration studies has been developed and validated. In vitro penetration studies were carried out in Franz diffusion cells with porcine skin. Tape stripping technique was used to separate the stratum corneum (SC) from the viable epidermis and dermis. Imiquimod was extracted from skin samples using a 7:3 (v/v) methanol:acetate buffer (100 mM, pH 4.0) solution and ultrasonication. Imiquimod was analyzed by HPLC using C(8) column and UV detection at 242 nm. The mobile phase used was acetonitrile:acetate buffer (pH 4.0, 100 mM):diethylamine (30:69.85:0.15, v/v) with flow rate 1 mL/min. Imiquimod eluted at 4.1 min and the running time was limited to 6.0 min. The procedure was linear across the following concentration ranges: 100-2500 ng/mL for both SC and tape-stripped skin and 20-800 ng/mL for receptor solution. Intra-day and inter-day accuracy and precision values were lower than 20% at the limit of quantitation. The recovery values ranged from 80 to 100%. The method is adequate to assay imiquimod from skin samples, enabling the determination of the cutaneous penetration profile of imiquimod by in vitro studies.     

Self-assembled reduced graphene oxide/sulfur composite encapsulated by polyaniline for enhanced electrochemistry performance

Reduced graphene oxide/sulfur/polyaniline (referred to RGO/S/PANI) composite was self-assembled through in situ synthesis and used to investigate the electrochemical properties of lithium/sulfur cells. The RGO/S/PANI composite possessed 809.3/801.9 mAh g^?1 of initial charge/discharge capacities, higher than 588.3/588.2 mAh g^?1 for reduced graphene oxide/sulfur (referred to RGO/S) and 681.4/669.9 mAh g^?1 for sulfur/polyaniline (referred to S/PANI) at similar conditions. The RGO/S/PANI composite obtained 400 mAh g^?1 at 2 C and good reversible capacities of 605.5 and 600.8 mAh g^?1 at 100th charge/discharge cycle at 0.1 C, in comparison with low electrochemical performance of RGO/S and S/PANI. The improved properties could be attributed to the collaboration of RGO and PANI. Co-generation of RGO and sulfur acted as seeds for their depositions, stimulated their uniform distributions, and restricted the agglomeration of sulfur particles in situ synthesis. Polyaniline coated RGO/S and stabilized the nanostructure of RGO/S/PANI in repeated charge/discharge cycles. In addition, RGO and PANI provided many electron channels to enhance sulfur conductivity and sufficient void space for sulfur swelling during charge/discharge cycles.     

Solubilization of active molecules in microemulsions for improved environmental protection

Various industries including food and pharmaceuticals are sharing increasing interest in microemulsions. Also, one can demonstrate that solubilization of active materials within the core or interface of microemulsions may have environmental benefits.

In this work, we report three examples of new microemulsion formulations specially designed to be capable of solubilizing active materials and protecting the environment from the emission of hazardous matter or protecting sensitive molecules from the detrimental effects of the environment.

In the first example, fire-resistant ingredients were incorporated in hydraulic fluids based on water-in-oil (W/O) microemulsions and their typical characteristics were described. In the second example, five-component oil-in-water (O/W) microemulsions were designed to solubilize lycopene and protect it from exposure to light. In the third example, a friendly solvent (butyl lactate) was microemulsified to form nanosized liquid droplets capable of solubilizing bromine-based bactericide formulations of sophisticated wood preservatives.

The new vehicles exhibit a very significant solubilization capacity and can be applied in aqueous media. In the last example, the active matter may be triggered when demanded and the release will be followed by film formation.     

Electrolyte additives for improved lithium-ion battery performance and overcharge protection

Much effort is being expended on the development of smart, safe, high-power lithium-ion batteries that are also environmentally friendly. Scaled-up lithium-ion batteries still raise safety concerns, especially when they are overcharged. Therefore, efforts continue to improve the thermal and chemical stability of positive electrodes, negative electrodes, separators, and electrolytes within the battery to counter thermal runaway. This opinion discusses highlights of research on additives for nonaqueous electrolytes published during 2018 and 2019.     

Determination of wavelength-specific UV protection factors of sunscreens in intact skin by EPR measurement of UV-induced reactive melanin radical

There remains an unmet need for skin tissue-based assays for the measurement of the UVA protection and efficacy of sunscreens. Here we describe development of a novel electron paramagnetic resonance assay that uses the photogeneration of reactive melanin radical as a measure of UV light penetration to melanocytes in situ in skin. We have used areas of focal melanocytic hyperplasia in the skin of Monodelphis domestica to model the human nevus. We show that we are able to use this assay to determine the monochromatic protection factors (mPF) of research and commercial sunscreens at specific narrow wavebands of UVB, UVA and blue visible light. Both commercial sunscreens, a sun protection factor (SPF) 4 and an SPF 30 product, had mPFs in the UVB range that correlated well with their claimed SPF. However, their mPF in the UVA ranges were only about one-third of claimed SPF. This technique can be used to design and assay sunscreens with optimally balanced UVA and UVB protection.     

Photostability and skin penetration of different E-resveratrol-loaded supramolecular structures

It is desirable and challenging to prevent E-resveratrol (E-RSV) from photoisomerizing to its Z-configuration to preserve its biological and pharmacological activities. The aim of this research was to evaluate the photostability of E-RSV-loaded supramolecular structures and the skin penetration profile of chemically and physically stable nanoestructured formulations. Different supramolecular structures were developed to act as carriers for E-RSV, that is, liposomes, polymeric lipid-core nanocapsules and nanospheres and solid lipid nanoparticles. The degrees of photostability of these formulations were compared with that of an ethanolic solution of E-RSV. The skin penetration profiles of the stable formulations were obtained using vertical diffusion cells (protected from light and under UVA radiation) with porcine skin as the membrane, followed by tape stripping and separation of the viable epidermis and dermis in a heated water bath. Photoisomerization was significantly delayed by the association of resveratrol with the nanocarriers independently of the supramolecular structure. Liposomes were the particles capable of maintaining E-RSV concentration for the longest time. On the other hand, E-RSV-loaded liposomes reduced in size showing low physical stability under UVA radiation. In the dark, the skin penetration profiles were very similar, but under UVA radiation the E-RSV-loaded nanocarriers showed increasing amounts in the total epidermis.     

Photostabilization of butyl methoxydibenzoylmethane (Avobenzone) and ethylhexyl methoxycinnamate by bis-ethylhexyloxyphenol methoxyphenyl triazine (Tinosorb S), a new UV broadband filter

It is now well documented that chronic UVA exposure induces damage to human skin. Therefore, modern sunscreens should not only provide protection from both UVB and UVA radiation but also maintain this protection during the entire period of exposure to the sun. UVA filters, however, are rare and not sufficiently photostable. We investigated the effect of the introduction of a new UV filter, bis-ethylhexyloxyphenol methoxyphenyl triazine (Tinosorb S), in oil in water sunscreen formulations on the photostability of butyl methoxydibenzoylmethane (Avobenzone [AVB]) after irradiation with an optically filtered Xenon arc source (UV irradiance adjusted at 1 mean effective dose [MED]/min). With spectrophotometrical methods to assess the sun protection factor (SPF) and UVA ratio and chromatographical methods to determine the amount of UV filters recovered after irradiation we showed that Tinosorb S prevented the photodegradation of AVB in a concentration-dependent way, leading to a sustained SPF and UVA ratio even after irradiation with doses of up to 30 MED. Since AVB was shown to destabilize ethylhexyl methoxycinnamate (EHM) we tested the effect of Tinosorb S in sunscreens containing this UV filter combination. Here too Tinosorb S showed photoprotective properties toward both UV filters. Thus, Tinosorb S can be used successfully to improve the photostability and efficiency of sunscreens containing AVB and EHM.     

UV spectroscopic study of oxidized and reduced palladium loaded zeolites

UV and visible reflectance spectra of Pd(II) ion exchanged zeolites have been recorded before and after hydrogen reduction. The reduction was performed either at 25°C (60% reduction) or at 500°C. Reoxidation by oxygen at 400°C restored the initial Pd(II) ions only in the case of the sample reduced at low temperature. With nitric oxide, reoxidation occurred even at 25°C, regardless of the temperature of reduction, The Pd(II) ions were redispersed in the zeolite lattice through the formation of nitrosyl complexes.

---

Pd(II) . 25°C ( 60%) 500°C. 400°C Pd(II) , . 25°C ; Pd(II) .

     

Inflammatory doses of UV may not be necessary for skin carcinogenesis

The UV wavelengths in sunlight are the main cause of skin cancer in humans. Sunlight causes gene mutations, immunosuppression and, at higher doses, inflammation. While it is clear that immunosuppression and gene mutations are essential biologic events via which UV causes skin cancer, the requirement for UV-induced inflammation is less certain. Both the UVB (290-320 nm) and UVA (320-400 nm) wavebands within sunlight can cause skin cancer, gene mutations and immunosuppression. However, UVB, but not UVA, at realistic doses can cause inflammation, and UVB induces skin cancer, immunosuppression and gene mutations at doses much lower than those required to cause inflammation. Inflammation enhances skin carcinogenesis, but may not be UV induced, and inflammatory mediators at doses too low to cause inflammation may be required. UV-induced mutations can cause epidermal cells to make proinflammatory factors or to induce them in the surrounding stroma, creating an oxidizing environment in which additional oncogenic mutations are likely to take place, even in the absence of UV. Our hypothesis is therefore that subinflammatory doses of both UVA and UVB cause benign skin tumors. One of the effects of sunlight-induced mutations may be the production of inflammatory mediators that enhance carcinogenesis.     

UV protection and singlet oxygen quenching activity of aloesaponarin I

The UV protection and singlet oxygen quenching of aloesaponarin I have been studied by means of laser spectroscopy. The excited-state intramolecular proton transfer that provides the UV protection takes place along only one of the molecule's two intramolecular hydrogen bonds, and this can be understood by considering the nodal pattern of the wave function. The functional groups participating in the excited-state intramolecular proton transfer also play important roles in the singlet oxygen quenching. Aloesaponarin I has a quenching rate constant larger than that of vitamin E and has a long duration of action due to its resistance to UV degradation and chemical attacks by singlet oxygen and free radicals.     

Fluorescent AIE dots encapsulated organically modified silica (ORMOSIL) nanoparticles for two-photon cellular imaging

2,3-Bis(4-(phenyl(4-(1,2,2-triphenylvinyl)phenyl)amino)phenyl) fumaronitrile (TPE-TPA-FN or TTF), which possesses aggregation-induced emission (AIE) characteristic, is doped in organically modified silica (ORMOSIL) nanoparticles. By increasing the weight ratio of TTF to the precursor of silica nanoparticles (the quantities of the precursors were kept the same), the fluorescence intensity of nanoparticles increased correspondingly, due to the formation of larger AIE dots in the cores of ORMOSIL nanoparticles. The fluorescent and biocompatible nanoprobes were then utilized for in vitro imaging of HeLa cells. Two-photon fluorescence microscopy clearly illustrated that the nanoparticles have the capacity of nucleus permeability, as well as cytoplasm staining towards tumor cells. Our experimental results may offer a promising method for fast and bright fluorescence imaging, as well as bio-molecule/drug delivery to cell nucleus.     

An improved methodology for adsorption characterization of unmodified and modified silica gels

An improvement in the adsorption characterization of the surface and structural properties of unmodified and modified mesoporous silica gels is presented. This improvement was achieved by selection of proper macroporous silica as the reference solid for adsorption characterization of porous silica gels. Experimental illustration is provided for unmodified and n-octyl-modified silica gels of different bonding density. The surface and structural properties of these silica gels were characterized by utilizing the standard adsorption data for both unmodified and octyl-modified LiChrospher Si-1000 macroporous silica gels. It was shown that the standard nitrogen adsorption data have an appreciable influence on the analysis of the pore size and surface properties of silica gels. This analysis can be improved by selecting the reference solid of the surface properties close to those of the silica gel studied.