Chiral CE of aromatic amino acids by ligand-exchange with zinc(II)-L-lysine complex

A novel method of chiral ligand-exchange CE was developed with either L- or D-lysine (Lys) as a chiral ligand and zinc(II) as a central ion. This type of chiral complexes was explored for the first time to efficiently separate either individual pairs of or mixed aromatic amino acid enantiomers. Using a running buffer of 5 mM ammonium acetate, 100 mM boric acid, 3 mM ZnSO(4) x 7H(2)O and 6 mM L-Lys at pH 7.6, unlabeled D,L-tryptophan, D,L-phenylalanine, and D,L-tyrosine were well separated, giving a chiral resolution of up to 7.09. The best separation was obtained at a Lys-to-zinc ratio of 2:1, zinc concentration of 2-4 mM and running buffer pH 7.6. The buffer pH was determined to have a strong influence on resolution, while buffer composition and concentration impacted on both the resolution and peak shape. Boric acid with some ammonium acetate was an adoptable buffer system, and some additives like ethylene diamine tetraacetic acid capable of destroying the complex should be avoided. Fine-tuning of the chiral resolution and elution order was achieved by regulating the ratio of L-Lys to D-Lys; i.e. the resolution increased from zero to its highest value as the ratio ascended from 1:0 to 1:infinitive, and L-isomers eluted before or after D-isomers in excessive D- or L-Lys, respectively.     

Capillary Coated with Layer-by-Layer Assembly of γ-Zirconium Phosphate/ Lysozyme Nanocomposite Film for Open Tubular Capillary Electrochromatography Chiral Separation

A new capillary coating of alternate -zirconium phosphate lysozyme fabricated for open-tubular electrochromatography enantioseparation. The chiral compounds D, L-tryptophan tested were enantiomerically resolved. The influences brought by experimental parameters, such as organic modifier, temperature, applied voltage and pH of running buffer on the performance of the column, were investigated.     

3-[(3-Dehydroabietamidopropyl)dimethylammonio]-1-propane-sulfonate as a new type of chiral surfactant for enantiomer separation in micellar electrokinetic chromatography

A new type of chiral surfactant, 3-[(3-dehydroabietamidopropyl) dimethylammonio]-1-propanesulfonate (DHAMAP) has been synthesized. The ability of this compound to perform chiral separation of D/L-amino acids derivatized with naphthalene-2, 3-dicarboxaldehyde (NDA-D/L-amino acids) has been investigated by capillary electrophoresis (CE). Enantiomeric separation of NDA-D/L-amino acids was achieved with a running buffer consisting of 50 mM borate (pH 9.75) and 25 mM DHADMP. Under the conditions selected, 6 pairs of tested amino acids enantiomers including NDA-D/L-tryptophan, NDA-D/L-phenylalanine, D/L-D/L-kynurenine, NDA-D/L-beta-phenylalanine, NDA-D/L-4-methylphenylalanine and NDA-D/L-arginine were well resolved. The resolution values were in the range of 1.56-5.40.     

Direct chiral resolution of malic acid in apple juice by ligand-exchange capillary electrophoresis using copper(II)-L-tartaric acid as a chiral selector

Chiral resolution of native DL-malic acid was achieved by ligand-exchange capillary electrophoresis using copper(II)-L-tartrate as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of malic acid were studied. The running conditions for optimum separation of malic acid were found to be 1 mM copper(II) sulfate-1 mM L-tartrate (pH 5.1) with an effective voltage of -20 kV at 30 degrees C, using direct detection at 280 nm, and resolution (Rs) of racemic malic acid was approximately 4. With this system, D- and L-malic acids in apple juice were analyzed successfully.     

Direct chiral resolution of lactic acid in food products by capillary electrophoresis

Chiral resolution of native DL-lactic acid was performed by capillary electrophoresis using 2-hydroxypropyl-beta-cyclodextrin as a chiral selector. Various factors affecting chiral resolution, migration time, and peak area of lactic acid were studied. The running conditions for optimum separation of lactic acid were found to be 90 mM phosphate buffer (pH 6.0) containing 240 mM 2-hydroxypropyl-beta-cyclodextrin with an effective voltage of -30 kV at 16 degrees C, using direct detection at 200 nm. In order to enhance the sensitivity, sample injection was done under a pressure of 50 mbar for 200 s. On-line sample concentration was accomplished by sample stacking. With this system, D- and L-lactic acids in food products were analyzed successfully.     

Synthesis and application of dehydroabietylisothiocyante as a new chiral derivatizing agent for the enantiomeric separation of chiral compounds by capillary electrophoretic

A new chiral derivatizing reagent, dehydroabietylisothiocyante (DHAIC), was synthesized and used for the enantiomeric separation of chiral compounds in capillary electrophoresis (CE). The synthetic route to obtain DHAIC is described. The separation conditions for the chiral separation of several chiral compounds, such as protein amino acids and chiral drug DOPA were optimized. Best results for the chiral separation of DHAIC derivatized amino acids and DOPA were obtained in a running buffer consisted of 50 mM borate (pH 9.5), 5 mM sodium dodecyl sulphate (SDS) and 20% acetonitrile for amino acids and 60 mM Na₂HPO₄ (pH 8.0), 17 mM SDS and 25% acetonitrile for DOPA. Under the conditions studied, chiral separation of five amino acids including Ser, Val, Ala, Thr, Cys and a chiral drug DOPA as their diastereomeric DHAIC derivatives has been achieved by micellar electrokinetic chromatography (MEKC).     

Cyclodextrin-mediated micellar electrokinetic chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the enantiomer separation of racemorphan in human urine.

Micellar electrokinetic chromatography (MEKC) was successfully and conveniently applied to the chiral separation with the addition of cyclodextrins (CDs) as chiral selector to the running buffer. Chiral separation depended on the type of CD; in particular, beta-CD was effective for the chiral separation of racemorphan. We investigated the optimal conditions of type and concentration of CD as chiral selector for the routine enantiomeric separation of racemorphan with good reproducibility. The effects of other parameters such as buffer pH and detection wavelength were also investigated to obtain the optimum conditions for the enantiomeric separation of racemorphan. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used for confirmation of racemorphan. The optimal conditions for enantiomeric separation of the racemorphan were as follows: 50 mM borate buffer at pH 9.4 with 50 mM SDS, 10 mM beta-CD and 20% 1-propanol, 57 cm x 50 microns fused-silica capillary column, and UV detection at 192 nm. Based on the developed method, racemorphan in human urine was also separated and determined using solid-phase extraction and MEKC.     

Separation of atropisomers of anti-hepatitis drug dimethyl diphenyl bicarboxylate analogues by capillary electrophoresis with vancomycin as the chiral selector

Separation of atropisomers of analogues of the anti-hepatitis drug dimethyl diphenyl bicarboxylate (DDB) by capillary electrophoresis with vancomycin as the chiral selector is described. Among several tested chiral selectors, including various cyclodextrin derivatives as well as vancomycin, only the latter displayed the enantioselectivity to the studied atropisomers. However, relatively poor separation efficiency was obtained due to the adsorption of vancomycin on the capillary wall. This problem was overcome by modifying the capillary wall with a polycationic electrolyte named hexadimethrine bromide (HDB) to produce a positively charged coating, which minimized the adsorption of vancomycin on the capillary wall by electrostatic repulsion. Moreover, the positively charged coating could shorten the separation time by reversing the EOF because the reversed EOF migrated to the same direction as the negatively charged analyte. Effects of buffer pH, vancomycin and buffer concentrations and applied voltage on the separation were investigated and the optimal conditions were established as follows: 40 mM Tris-phosphate buffer (pH 6.0) containing 6.0 mM vancomycin and 0.001% HDB. Baseline separation of three racemic DDB analogues was obtained within 12 min under the optimal conditions.     

Enantiomer separation of drugs by capillary electrophoresis using proteins as chiral selectors

The separation of drug enantiomers using proteins as the chiral selectors in capillary electrophoresis (CE) is considered in this review. The proteins used include albumins such as bovine serum albumin, human serum albumin and serum albumins from other species, glycoproteins such as alpha1-acid glycoprotein, crude ovomucoid, ovoglycoprotein, avidin and riboflavin binding protein, enzymes such as fungal cellulase, cellobiohydrolase I, pepsin and lysozyme and other proteins such as casein, human serum transferrin and ovotransferrin. Protein-based CE is carried out in two modes: in one proteins are immobilized or adsorbed within the capillary, or protein-immobilized silica gels are packed into the capillary (affinity capillary electrochromatography mode), and in the other proteins are dissolved in the running buffer (affinity CE mode). Furthermore, the advantages and limitations of the two modes and the factors affecting the chiral separations of various drugs by protein-based CE are discussed.     

牛血清白蛋白手性毛细管整体柱的制备及对映体的分离

A silica-bonded bovine serum albumin (BSA) chiral monolithic stationary phase for capillary electrochromatography(CEC) was introduced. An inorganic-organic hybrid monolithic column was firstly prepared by sol-gel chemistry with homogeneously distributed aminopropyl groups throughout the silica matrix. Then the chiral stationary phase was synthesized by the in situ covalent immobilization of BSA on the monolithic column activated with glutaraldehyde. The effects of pH value and concentration of phosphate buffer on the separation of D,L-tryptophan were investigated. The separation factor of D,L-tryptophan reached 3.37 on CEC mode.     

Fast enantiomeric separation with vancomycin as chiral additive by co-electroosmotic flow capillary electrophoresis: increase of the detection sensitivity by the partial filling technique

A fast and sensitive method is described by using vancomycin as a chiral additive for enantiomeric separation by capillary electrophoresis (CE). In order to overcome disadvantages associated with use of vancomycin as chiral additive in CE, several strategies including the dynamic coating technique, the co-electroosmotic flow technique, and the partial filling technique were employed sequentially in this method. Using the polycationic polymer hexadimethrine bromide (HDB) as a buffer additive, the capillary wall was dynamically coated with a thin film formed by the adsorbed HDB. Consequently, the adsorption of vancomycin onto the capillary wall was minimized via electrostatic repulsion between the coating of the capillary wall and the vancomycin molecule. In addition, the reversed electroosmotic flow (from cathode to anode) produced by the positively charged capillary wall migrates in the same direction of negatively charged analytes (co-electroosmotic flow electrophoresis). Thereby the electrophoretic mobility of negatively charged analytes were drastically accelerated leading to a short separation time of less than 3.4 min. The separation time was further reduced by the use of a short-end-injection technique. For example, the analysis time was achieved by as short as 55 s for a baseline separation of dansyl-alpha-amino-n-butyric acid. Concurrently, the partial filling technique was used to avoid the loss of detection sensitivity caused by the presence of vancomycin in the running buffer. The effect of several parameters, such as HDB concentration, buffer pH, plug length of the chiral selector, concentration of the chiral selector and applied voltage, on enantioselectivity were investigated toward optimization. Besides the advantage of a very short separation time, the method is characterized by high detection sensitivity, high selectivity, and high efficiency.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Enhanced capillary zone electrophoresis in cyclic olefin copolymer microchannels using the combination of dynamic and static coatings for rapid analysis of carnosine and niacinamide in cosmetics

Cosmetics that have medicinal effects, including anti-inflammatory and antioxidant, have become a daily care routine consumption. The peptide additives, such as carnosine and nicotinamide, were frequently used to realize these medicinal effects. To accomplish rapid and effective quantitation of carnosine and niacinamide in cosmetics, capillary zone electrophoresis was executed in cyclic olefin copolymer microchips having both dynamic and static coatings. The static coating of cyclic olefin copolymer microchannel was constructed from bovine serum albumin adsorption, immobilization, and active site closure, while the dynamic coating was formed by adding surfactant into running buffer of capillary zone electrophoresis. The static coating can improve the hydrophilicity of cyclic olefin copolymer surface and avoid nonspecific peptide adsorption. The dynamic coating of sodium dodecyl sulfate in running buffer proved to be useful in flow velocity adjustment and the column efficiency enhancement in the capillary zone electrophoresis separation channel of the cyclic olefin copolymer microchip device. A separation resolution up to 4.24 on the mixture of carnosine and nicotinamide was obtained. Moreover, an analysis method was established and applied to simultaneous carnosine and nicotinamide determination in a liquid whitening essence and a solid antiglycation pill, and the results were verified by comparison with high-performance liquid chromatography methods, indicating its potential in complex sample analysis.     

Small diamines as modifiers for phosphatidylcholine/phosphatidylserine coatings in capillary electrochromatography

Greater stability of liposome coatings and improved resolution of model steroids in capillary electrochromatography (CEC) were sought by adding small diamines (ethylenediamine, diaminopropane, bis-tris-propane, or N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid, HEPES)) to the liposome solution before coating of fused silica capillaries. The phospholipid coatings consisted of 1 mM of 8:2 mol% phosphatidylcholine (PC)/phosphatidylserine (PS) and 5 mM of modifier in buffer solutions (acetate, phosphate, or Tris) at pH 4.0-7.4. The coating was based on a published procedure, and five steroids were used as neutral model analytes in evaluation of the coating. The results showed that under optimal conditions, the small linear diamines increased the packing density of anionic phospholipids, leading to improved separations. In addition, the choice of buffer for the liposome coating and separation appeared to influence the performance of the coatings. While buffers with amino groups take part in the phospholipid bilayer formation, buffers like phosphate may even have negative effect on coating formation. The factors affecting phospholipid coatings with diamines as modifiers are clarified.     

Enantiomer resolution by using capillary zone electrophoresis: resolution of racemic tryptophan and determination of the enantiomer composition of commercial pharmaceutical epinephrine

The enantiomers of D- and L-tryptophan were separated by capillary electrophoresis, using alpha-cyclodextrin as a chiral active component in the background electrolyte. The separation of (-) and (+) epinephrine was achieved by supplementing the background electrolyte with Heptakis (2,6-di-O-methyl-beta-cyclodextrin). As a practical application of the method, the quantitative analysis of (-) and (+) enantiomers in commercial pharmaceutical solutions of adrenaline is shown.     

Immobilization of phospholipid-avidin on fused-silica capillaries for chiral separation in open-tubular capillary electrochromatography

Phospholipid-coated fused-silica capillaries with immobilized avidin were applied in the chiral separation of D,L-tryptophan, D,L-PTH-serine, and D,L-PTH-threonine at pH 7.4 by open-tubular CEC. Liposomes prepared from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(Cap biotinyl), or 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(Biotinyl) with different amounts of phosphatidylserine were assessed as phospholipid coating materials. The stability of the coating and the success of the coating procedure were evaluated in terms of the repeatability of the enantiomer migration times and the resolution of enantiomers. The coating procedure itself significantly affected the migration times and resolution of the enantiomers. Reliable chiral separations with high separation efficiencies were achieved through careful choice of the coating method.     

Application of carboxymethyl-beta-cyclodextrin as a chiral selector in capillary electrophoresis for enantiomer separation of selected neurotransmitters

The aim of this work was to optimize conditions for capillary electrophoresis separation of different neurotransmitters (serotonin, phenylalanine, dopamine, adrenaline, ephedrine, propranolol and DOPA) in a single run, including separation of existing enantiomers. As chiral selectors added to the borate background, electrolyte unsubstituted alpha-, beta- and -gamma-cyclodextrins (CDs), methyl-, dimethyl-, and trimethyl-substituted beta-CDs, and hydroxypropyl-substituted alpha-, beta- and gamma-CDs were examined. Also carboxymethyl-beta-CD and succinyl-beta-CD were used for this purpose. In addition to the kind and concentration of chiral selector, some other experimental factors also have been optimized, such as concentration of borate buffer, content of methanol, pH of electrolyte, method of sample introduction into the capillary and washing procedure between consecutive runs. The best results were obtained using 20 mM carboxymethyl-beta-CD in borate buffer of pH 7.5 as running electrolyte and hydrostatic injection. The obtained sensitivity of response (peak height) varied from 0.4 for adrenalines to 2.3 mAU mM(-1) for propranolols. The concentration detection limits (S/N=3) were in the range from 0.04 mM for propranolols to 0.2 mM for adrenalines. The resolution obtained in optimized conditions in a single run was from 0.75 for adrenalins and 1.0 for propranolols up to 2.0 for ephedrines. The developed method was employed for determination of these analytes in brain tissue extracts.     

Enantioselective Separation of Basic Drugs by CE with Polygalacturonic Acid as a Novel Chiral Selector

Polygalacturonic acid, a linear high molecular weight homopolysaccharide was investigated as a chiral selector in capillary zone electrophoresis for the separation of enantiomers of basic drugs. The choices of running buffer pH and concentration of chiral selector were found to be important for the improvement of enantioselectivity. The effects of background electrolyte concentration and the capillary temperature on the separation were also examined. Enantioseparations were carried out in the acidic conditions using 1.5% polygalacturonic acid (w/v) in a 40 mM phosphate buffer under an applied voltage of 15 kV. The optimization of these separations was dependent on the nature of the analytes and could be achieved by the proper choice of experimental conditions. A brief mechanism of enantiorecognition by polygalacturonic acid was also given.     

Enantiomeric separation of D- and L-carnitine by integrating on-line derivatization with capillary zone electrophoresis.

A new capillary zone electrophoretic method has been developed for the enantiomeric separation and quantification of enantiomers of carnitine, D- and L-carnitine were derivatized with 9-fluorenylmethyl chloroformate in a flow system, working on-line with the capillary electrophoretic equipment. The separation was performed using a selective chiral buffer containing 2,6-dimethyl-beta-cyclodextrin (heptakis). Triethanolamine was used as electroosmotic modifier and the separation was carried out in a uncoated capillary. Under the optimal conditions the resolution between D- and L-carnitine was 1.2 and the limits of detection for both isomers were about 5.0 microM. The proposed method was applied to the determination of D-carnitine in excess of L-carnitine in synthetic samples, and the results demonstrated that the maximal D-:L-carnitine ratio determined was approximately 1:100.     

Stable physically adsorbed coating of poly-vinyl alcohol for the separation of basic proteins

In aqueous capillary electrophoresis, the electroosmotic flow can be strongly suppressed by coating the inner surface of the capillary. In the present work hydrophilic coating of 4% polyvinyl alcohol (PVA) has been used for the analysis of basic proteins. The coating is simple and easy to obtain. The separation of ribonuclease and α-chymotrypsin has been uniquely done with other three basic proteins (lysozyme, cytochrome-c and trypsin) using a buffer 11.60 mM sodium acetate and 18.40 mM acetic acid at pH 4.5 in addition to positive power supply of 20 kV at 25°C. Detection was performed using UV detector at 230 nm. The proposed PVA coated capillary provides reproducible separation of five basic proteins within 10 min with RSD values for mobility bellow 1.4% (n = 6) for all the five basic proteins. The stability of coated capillary has been checked up to 40 runs. The viscosity measurement for 4% PVA have been studied and scanning electron microscope (SEM) images obtained to make it compatible with future micro-chip applications.