Silica-metal core-shell nanostructures

Silica-metal nanostructures consisting of silica cores and metal nanoshells attract a lot of attention because of their unique properties and potential applications ranging from catalysis and biosensing to optical devices and medicine. The important feature of these nanostructures is the possibility of controlling their properties by the variation of their geometry, shell morphology and shell material. This review is devoted to silica-noble metal core-shell nanostructures; specifically, it outlines the main methods used for the preparation and surface modification of silica particles and presents the major strategies for the formation of metal nanoshells on the modified silica particles. A special emphasis is given to the St?ber method, which is relatively simple, effective and well verified for the synthesis of large and highly uniform silica particles (with diameters from 100 nm to a few microns). Next, the surface chemistry of these particles is discussed with a special focus on the attachment of specific organic groups such as aminopropyl or mercaptopropyl groups, which interact strongly with metal species. Finally, the synthesis, characterization and application of various silica-metal core-shell nanostructures are reviewed, especially in relation to the siliceous cores with gold or silver nanoshells. Nowadays, gold is most often used metal for the formation of nanoshells due to its beneficial properties for many applications. However, other metals such as silver, platinum, palladium, nickel and copper were also used for fabrication of core-shell nanostructures. Silica-metal nanostructures can be prepared using various methods, for instance, (i) growth of metal nanoshells on the siliceous cores with deposited metal nanoparticles, (ii) reduction of metal species accompanied by precipitation of metal nanoparticles on the modified silica cores, and (iii) formation of metal nanoshells under ultrasonic conditions. A special emphasis is given to the seed-mediated growth, where metal nanoshells are formed on the modified silica cores with deposited metal nanoparticles. This strategy assures a good control of the nanoshell thickness as well as its surface properties.     

Water-soluble surface-anchored gold and palladium nanoparticles stabilized by exchange of low molecular weight ligands with biamphiphilic triblock copolymers

A study is presented of the stabilization of gold and palladium nanoparticles (NPs) via a place-exchange reaction. Au and Pd NPs of approximately 3.5 nm were prepared by a conventional method using tetraoctylammonium bromide (TOAB) as the stabilizing agent. The resulting nanoparticles, referred to as Au-TOAB or Pd-TOAB, were later used as templates for the replacement of TOAB ligand with poly(ethylene oxide)- b-polystyrene- b-poly(4-vinylpyridine) (PEO- b-PS- b-P4VP) triblock copolymer. This biamphiphilic triblock copolymer was synthesized by atom transfer radical polymerization (ATRP) with control over the molecular weight and polydispersity. The place-exchange reaction was mediated through strong coordination forces between the 4-vinylpyridine copolymer and the metal species located on the surface of the nanoparticles. In addition, the displacement of the outgoing low molecular weight TOAB ligands by high molecular weight polymers is an entropy-assisted process and is believed to contribute to stabilization. The prepared complex, polymer-NP, exhibits greatly improved stability over the metal-NP complex in common organic solvents for the triblock copolymer. Self-assembly in water after ligand exchange resulted in micellar structures of about approximately 20 nm (electron microscopy) with the metal NP found located on the surface of the micelles. The stability of the nanoparticles in water was shown to depend greatly on the grafting density of the copolymer, with high stability (more than 6 months) at high grafting density and low stability, accompanied with irreversible agglomeration, at relatively low grafting densities. The surprising location of the metal NP (for both Au and Pd) on the surface of the micelles in water is explained by the fact that, upon self-assembly in THF/water system, the most hydrophobic chains (i.e., PS) undergo self-assembly first at low water content forming the core, followed by the P4VP (whether or not associated with the metal) forming a shell, and finally the PEO forming the corona. In lower metal content assemblies, the P4VP chains located in the shell undergo swelling in an acidic medium causing a substantial increase in micellar corona size, as confirmed by dynamic light scattering measurements. The present study offers a simple approach for the stabilization of various metal nanoparticles of catalytic interest, using a unique polymeric support that can be dispersed in organic solvents as well as aqueous solutions.     

Hierarchical positioning of gold nanoparticles into periodic arrays using block copolymer nanoring templates

We report a simple and versatile self-assembly method for controlling the placement of functional gold nanoparticles on silicon substrates using micellar templates. The hierarchical positioning of gold nanoparticles is achieved in one-step during the spontaneous phase inversion of spherical poly(styrene)-block-poly(2-vinylpyridine) copolymer micelles into nanoring structures. The placement is mainly driven by the establishment of electrostatic interactions between the nanoparticle ligands and the pyridine groups exposed at the interface. In particular, we show the formation of ordered arrangements of single gold nanoparticles or nanoparticle clusters and demonstrate that their morphologies, densities and periodicities can be tuned by simply varying the initial block copolymer molecular weight or the deposition conditions. Besides gold nanoparticles, the method can be used for controlling the assembly of a large variety of nanoscale building blocks, thus opening an attractive pathway for generating functional hybrid surfaces with periodic nanopatterns.     

Mechanism of gold metal ion reduction, nanoparticle growth and size control in aqueous amphiphilic block copolymer solutions at ambient conditions

Spontaneous formation and efficient stabilization of gold nanoparticles with an average diameter of 7 approximately 20 nm from hydrogen tetrachloroaureate(III) hydrate (HAuCl4.3H2O) were achieved in air-saturated aqueous poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer solutions at ambient temperature in the absence of any other reducing agent. The particle formation mechanism is considered here on the basis of the block copolymer concentration dependence of absorption spectra, the time dependence (kinetics) of AuCl4- reduction, and the block copolymer concentration dependence of particle size. The effects of block copolymer characteristics such as molecular weight (MW), PEO block length, PPO block length, and critical micelle concentration (cmc) are explored by examining several PEO-PPO-PEO block copolymers. Our observations suggest that the formation of gold nanoparticles from AuCl4- comprises three main steps: (1) reduction of metal ions by block copolymer in solution, (2) absorption of block copolymer on gold clusters and reduction of metal ions on the surface of these gold clusters, and (3) growth of metal particles stabilized by block copolymers. While both PEO and PPO blocks contribute to the AuCl4- reduction (step 1), the PEO contribution appears to be dominant. In step 2, the adsorption of block copolymers on the surface of gold clusters takes place because of the amphiphilic character of the block copolymer (hydrophobicity of PPO). The much higher efficiency of particle formation attained in the PEO-PPO-PEO block copolymer systems as compared to PEO homopolymer systems can be attributed to the adsorption and growth processes (steps 2 and 3) facilitated by the block copolymers. The size of the gold nanoparticles produced is dictated by the above mechanism; the size increases with increasing reaction activity induced by the block copolymer overall molecular weight and is limited by adsorption due to the amphiphilic character of the block copolymers.     

Surface-functionalized CdSe nanorods for assembly in diblock copolymer templates

Poly(ethylene oxide)-covered CdSe nanorods were prepared and assembled in diblock copolymer templates by floating the block copolymer templates onto aqueous nanorod solutions. The assembly was enabled by consideration of the surface ligand coverage of the nanorods. Alkane-covered CdSe nanorods prepared by state-of-the-art techniques are not compatible with this assembly process. However, poly(ethylene oxide) (PEO)-functionalized CdSe nanorods were successfully used to assemble the nanorods into the channels and pores of diblock copolymer templates. Other water-dispersible CdSe nanorods, such as those covered with 11-mercaptoundecanoic acid (MUA), did not give the desired assemblies. These results are understood by considering the surface energies of the PEO-covered CdSe nanorods in this interfacial assembly process.     

Effect of hydrophobicity inside PEO-PPO-PEO block copolymer micelles on the stabilization of gold nanoparticles: experiments

In this paper we present the effect of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer micelles and their hydrophobicity on the stabilization of gold nanoparticles. Gold nanoparticles were prepared by a method developed by Sakai et al. (Sakai, T.; Alexandridis, P. Langmuir 2004, 20, 8426). An absorption centered at 300-400 nm in time-dependent UV spectra provided evidence that the very first step of the synthesis was to form primary gold clusters. Then the gold clusters grew in size and were stabilized by block copolymer micelles. The stabilization capacities of the micelles were modulated by tuning the block copolymer concentration and composition and by adding salts. With good stabilization, gold particles were spherical and uniform in size with a diameter of 5-10 nm. Otherwise they were aggregates with irregular shapes such as triangular, hexagonal, and rodlike. The presence of a small amount of NaF significantly increased the stabilization capacity of the micelles and consequently modified the quality of the gold particles. Using FTIR and 1H NMR spectroscopy, micellization of the block copolymers and hydrophobicity of the micelles were proven very important for the stabilization. A higher hydrophobicity of the micelle cores was expected to favor the entrapment of primary gold clusters and the stabilization of gold nanoparticles.     

Synthesis of tubular gold and silver nanoshells using silica nanowire core templates

We report the synthesis of tubular gold and silver nanoshells on silica nanowire core templates in solution. Silica nanowires were synthesized and characterized with optical and NMR methods. Gold nanoparticle seeds (2 to 3 nm) with weak repulsive surfactants such as tetrakis-hydroxymethyl-phosphonium chloride (THPC) were conjugated to the surface of these nanowires. A regrowth process was initiated from these nanoparticles on the surface of the silica nanowires dispersed in gold or silver stock solutions in the presence of reducing agents. Micrometers-long gold and silver tubular nanoshells (80-150 nm o.d.) were made, fully covering the silica nanowires.     

Synthesis and plasmonic properties of silver and gold nanoshells on polystyrene cores of different size and of gold–silver core–shell nanostructures

Simple methods of preparing silver and gold nanoshells on the surfaces of monodispersed polystyrene microspheres of different sizes as well as of silver nanoshells on free-standing gold nanoparticles are presented. The plasmon resonance absorption spectra of these materials are presented and compared to predictions of extended Mie scattering theory. Both silver and gold nanoshells were grown on polystyrene microspheres with diameters ranging from 188 to 543 nm. The commercially available, initially carboxylate-terminated polystyrene spheres were reacted with 2-aminoethanethiol hydrochloride (AET) to yield thiol-terminated microspheres to which gold nanoparticles were then attached. Reduction of silver nitrate or gold hydroxide onto these gold-decorated microspheres resulted in increasing coverage of silver or gold on the polystyrene core. The nanoshells were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis spectroscopy. By varying the core size of the polystyrene particles and the amount of metal (silver or gold) reduced onto them, the surface plasmon resonance of the nanoshell could be tuned across the visible and the near-infrared regions of the electromagnetic spectrum. Necklace-like chain aggregate structures of gold core–silver shell nanoparticles were formed by reducing silver nitrate onto free citrate-gold nanoparticles. The plasmon resonance absorption of these nanoparticles could also be systematically tuned across the visible spectrum.     

Selective surface chemistry using alumina nanoparticles generated from block copolymers

Developing orthogonal surface chemistry techniques that perform at the nanoscale is key to achieving precise control over molecular patterning on surfaces. We report the formation and selective functionalization of alumina nanoparticle arrays generated from block copolymer templates. This new material provides an alternative to gold for orthogonal surface chemistry at the nanometer scale. Atomic force microscopy and X-ray photoelectron spectroscopy confirm these particles show excellent selectivity over silica for phosphonic and carboxylic acid adsorption. As this is the first reported synthesis of alumina nanoparticles from block copolymer templates, characterizations via Fourier transform infrared spectroscopy, Auger electron spectroscopy, and transmission electron microscopy are presented. Reproducible formation of alumina nanoparticles was dependent on a counterintuitive synthetic step wherein a small amount of water is added to an anhydrous toluene solution of block copolymer and aluminum chloride. The oxidation environment of the aluminum in these particles, as measured by Auger electron spectroscopy, is similar to that of native aluminum oxide and alumina grown by atomic layer deposition. This discovery expands the library of available surface chemistries for nanoscale molecular patterning.     

Preparation of stable gold nanoparticles by using diblock copolymer mixture as encapsulating agent

Gold nanoparticles by using the mixture of polystyrene-block-poly(2-vinyl pyridine)/poly(2-vinyl pyridine)-block-poly(ethylene oxide) (PS-b-P2VP/P2VP-b-PEO) block copolymers as encapsulating agent was prepared. The prepared nanoparticles were characterized by transmission electron microscopy, UV-Vis spectroscopy and contact angle. It is demonstrated that the obtained gold nanoparticles are covered with mixed block copolymer shells. The hydrophilic property of the nanoparticles can be varied by the change of the dispersion medium. The obtained gold nanoparticles with mixed block copolymer shells are stable in organic solvents (such as tetrahydrofuran and toluene) and water.     

Evolution of ultrafine gold seed nanoparticles with temperature and time and synthesis of plasmonic nanoshells

Features of the evolution of ultrafine gold nanoparticles synthesized by the Duff method with temperature and time have been studied in relation to their use as seeds for the formation of plasmonic nanoshells. A quantitative relation has been revealed between the duration of preheating of such particles at a preset temperature and their size. The obtained relation indicates that Au nanoparticles grow mainly via the Ostwald ripening mechanism. Using anisotropic composite FeOOH/Ag particles as an example, it has been shown that the obtained information may be used to substantially decrease the duration of the synthesis of metal nanoshells on diverse cores.     

Ordered two-dimensional ensembles of nanoparticles with Au-core/Ag-shell structure. Optical and sensor properties

Optical spectroscopy and atomic force microscopy are used to study the formation of silver shells on gold nanoparticles in their highly ordered two-dimensional ensembles produced by the method of block copolymer micellar lithography. The shells are synthesized using formaldehyde or hydroquinone as a reducing agent. The spectral characteristics of the nanoparticle ensemble are shown to be essentially sensitive to the silver shell thickness. As a result, working units of solid-state optical sensors for detecting trace amounts of metal ions and different reductants may be created based on highly ordered 2D ensembles of gold nanoparticles.     

Nanoscale patterning of two metals on silicon surfaces using an ABC triblock copolymer template

Patterning technologically important semiconductor interfaces with nanoscale metal films is important for applications such as metallic interconnects and sensing applications. Self-assembling block copolymer templates are utilized to pattern an aqueous metal reduction reaction, galvanic displacement, on silicon surfaces. Utilization of a triblock copolymer monolayer film, polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) (PS-b-P2VP-b-PEO), with two blocks capable of selective transport of different metal complexes to the surface (PEO and P2VP), allows for chemical discrimination and nanoscale patterning. Different regions of the self-assembled structure discriminate between metal complexes at the silicon surface, at which time they undergo the spontaneous reaction at the interface. Gold deposition from gold(III) compounds such as HAuCl4(aq) in the presence of hydrofluoric acid mirrors the parent block copolymer core structure, whereas silver deposition from Ag(I) salts such as AgNO3(aq) does the opposite, localizing exclusively under the corona. By carrying out gold deposition first and silver second, sub-100-nm gold features surrounded by silver films can be produced. The chemical selectivity was extended to other metals, including copper, palladium, and platinum. The interfaces were characterized by a variety of methods, including scanning electron microscopy, scanning Auger microscopy, X-ray photoelectron spectroscopy, and atomic force microscopy.     

Interfacial synthesis of dendritic platinum nanoshells templated on benzene nanodroplets stabilized in water by a photocatalytic lipoporphyrin

Nanoscale metal shells have many potential uses and in some applications offer significant advantages over nanoparticles. The synthesis of platinum nanoshells using stabilized nanodroplets of benzene in water as growth templates is described; the nanodroplets are stabilized by a surfactant-like tin(IV)-porphyrin complex localized at the benzene-water interface. The porphyrin also acts as a photocatalyst that reduces the platinum complex and deposits metal onto the nanodroplets to form dendritic metal nanoshells. Below the solubility limit of benzene in water, the lipoporphyrin-stabilized nanodroplets have a reproducible number, size distribution, and surface area, which allows the thickness of the platinum shell walls to be controlled by changing the amount of platinum complex. Nanoscale platinum shells with magnetic interiors can be made by dispersing Fe3O4 nanoparticles in the benzene nanodroplets.     

Influence of metalation on the morphologies of poly(ethylene oxide)-block-poly(4-vinylpyridine) block copolymer micelles

Micellization of a poly(ethylene oxide)-block-poly(4-vinylpyridine) (PEO45-b-P4VP28) copolymer in water during metalation (incorporation of gold compounds and gold nanoparticle formation) with three types of gold compounds, NaAuCl4, HAuCl4, and AuCl3, was studied using dynamic light scattering (DLS) and transmission electron microscopy (TEM). The transformations of the PEO45-b-P4VP28 block copolymer micelles in water were found to depend on a number of parameters including the thermal history of the as-prepared block copolymer, the type of the metal compound, and the metal loading. For the HAuCl4-filled PE045-b-P4VP28 micelles, the subsequent reduction with hydrazine hydrate results in a significant fraction of rodlike micelles, suggesting that slow nucleation (confirmed by the formation of the large gold nanoparticles) and facilitated migration of gold ions yields the ideal conditions for sphere-to-rod micellar transition.     

Gold nanoparticle localization at the core surface by using thermosensitive core-shell particles as a template

We report novel thermosensitive hybrid core-shell particles via in situ gold nanoparticle formation using thermosensitive core-shell particles as a template. This method for the in situ synthesis of gold nanoparticles with microgel interiors offers the advantage of eliminating or significantly reducing particle aggregation. In addition, by using thermosensitive microgel structures in which the shell has thermosensitive and gel properties in water--whereas the core itself is a water-insoluble polymer--we were able to synthesize the gold nanoparticles only at the surface of the core, which had reactive sites to bind metal ions. After the gold nanoparticles were synthesized, electroless gold plating was carried out to control the thickness of the gold nanoshells. The dispersions of the obtained hybrid particles were characterized by dynamic light scattering and UV-vis absorption spectroscopy, and the dried particles were also observed by electron microscopy. Adaptation of the technique shown here will create a number of applications as optical, electronic, and biomedical functional materials.     

Micrometer-long gold nanowires fabricated using block copolymer templates

Micrometer-long gold nanowires were fabricated via self-assembly. Diblock copolymer films served as templates for the selective adsorption of 10 nm gold nanoparticles from solution to form well-defined nanostructures. An oxygen plasma treatment induced aggregation of the nanoparticles and the formation of continuous gold nanostructures. The electrical continuity of the nanostructures was observed using scanning electron microscopy.     

Supramolecular assemblies of block copolymers as templates for fabrication of nanomaterials

Self-assembled polymeric systems have played an important role as templates for nanofabrication; they offer nanotemplates with different morphologies and tunable sizes, are easily removed after reactions, and could be further modified with different functional groups to enhance the interactions. Among the various self-assembled polymeric systems, block copolymer supramolecular assemblies have received considerable attention because of the inherent processing advantages. These supramolecular assemblies are formed by the non-covalent interactions of one of the blocks of the block copolymer with a low molar-mass additive. Selective extraction of the additive leads to porous membranes or nano-objects which could then be used as templates for nanofabrication leading to a variety of ordered organic/inorganic nanostructures. In this feature article, we present an over-view of the recent developments in this area with a special focus on some examples from our group.     

Block copolymers in the synthesis of gold nanoparticles. Two new approaches: Copolymer aggregates as reductants and stabilizers and simultaneous formation of copolymer aggregates and gold nanoparticles

In this article, innovative applications of amphiphilic triblock and pentablock copolymers in the synthesis of gold nanoparticles are reported. The synthesis of gold nanoparticles is performed using two methods. In the first method, micellar aggregates of block copolymers and AuCl₄^? ions directly react in water; the nanoparticles obtained by this method are variable in size and are associated with copolymer aggregates. In the second method, two processes take place simultaneously: the aggregation of block copolymers and the reduction of Au (III) by the copolymers to form nanoparticles. In contrast with the first method, in this case, the nanoparticles obtained are located inside the copolymer aggregates. In both methods of synthesis, the block copolymers act simultaneously as reducing and stabilizing agents. To understand the role of copolymer aggregates in the synthesis of nanoparticles, molecular simulation methods are used. The gold nanoparticles, copolymer aggregates, and nanocomposite systems are characterized using transmission electron microscopy and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3069–3079     

Wet-chemical synthesis and characteristics of Au nanoshell

Noble metal nanostructures have been the research focus for many decades because of their real or poten-tial applications, such as catalysis, photography, optics, electronics, optoelectronics, information storage, bio-logical and chemical sensing, surface…