Chemiluminescence in the reaction of LnI<Subscript>2</Subscript> (Ln = Dy,Nd) with water

Chemiluminescence (CL) upon the reaction of crystalline LnI₂ (Ln = Dy, Nd) with water was found. The CL emitters are the Ln³⁺* electron-excited ions (Dy³⁺*, λ_max = 470, 570 nm; Nd³⁺*, λ = 700–1200 nm) generated by the electron transfer from the Ln^II ions to the H₂O molecules. The identified reaction products are H₂, dissolved LnI₃, and insoluble LnI(OH)₂ (49–51% and 48–50% yield for DyI₂ and NdI₂, respectively). The treatment of NdI₂ with an H₂O solution in THF gives the NdI₂OH(thf)₂·3H₂O complex and hydrogen. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1890–1893, October, 2007.     

Syntheses,spectroscopic study and crystal structures of some new <Emphasis Type="Italic">N</Emphasis>-benzoylphosphoric triamides

The reaction of N-benzoylphosphoramidic dichloride with amines afforded some new N-benzoylphos-phoric triamides with formula C₆H₅C(O)NHP(O)(X)₂, X=NH–CH(CH₃)₂ (1), NH–CH₂–CH(CH₃)₂ (2), NH–CH₂–CH(OCH₃)₂ (3), N(CH₃)[CH₂CH(OCH₃)₂] (4) and N(CH₃)(C₆H₁₁) (5) that were characterized by ¹H,¹³C,³¹P NMR, IR spectroscopy and elemental analysis. The structures have been determined for compounds 4 and 5 by X-ray crystallography. These compounds contain one amidic hydrogen atom and form centrosymmetric dimmers via intermolecular –P–O⋯H–N–hydrogen bonds besides weak C–H⋯O hydrogen bonds that lead to three-dimensional polymeric clusters in the crystalline lattice.     

Reduction of nitrogen with neodymium(II) and dysprosium(II) diiodides and selected properties of the resulting nitrides

The diiodides NdI₂ and DyI₂ react with nitrogen at an atmospheric pressure at 2704-550 °C to give the nitrides (LnI₂)₃N (Ln = Nd and Dy). The products obtained are insoluble in organic solvents; in THF, they rapidly disproportionate into LnI₃(THF)₃ and the iodide nitrides (NdI)₃N₂ of unclear structures. The nitrides (NdI₂)₃N and (DyI₂)₃N can be completely hydrolyzed into ammonia, the triiodide hydrates LnI₃(H₂O)₂, and the monoiodide hydrates LnI(OH)₂(H₂O). A reaction of (NdI₂)₃N with excess iodobenzene in THF gives Ph₃N and PhNH₂ in 9 and 5% yields, respectively. Reactions of (NdI₂)₃N with propyl chloride, benzyl chloride, and acetyl chloride produce no nitrogen-containing products. A reaction of (NdI₂)₃N with CpK gives Cp₃Nd(THF) in 63% yield.     

Specific chemical behavior of NdII and DyII iodides in reactions with aromatic compounds

Benzene, toluene, tert-butylbenzene, or biphenyl virtually do not react with NdI₂ (1) or DyI₂ (2) in THF at –20 °C but appreciably accelerate the reactions of these salts with solvents, resulting in LnI₃ and intractable mixtures of products of the general composition [LnI(H)(R)(THF)] (R are fragments of the THF molecule). The same effect is induced by the addition of diphenylmercury or tetraphenyltin to solutions of 1 or 2. Phenol easily oxidizes 1 and 2 to give at 0 °C the PhOLnI₂(THF) _x complexes (x = 3, 4) in 55—95% yields. At –90 °C, iodide 2 is converted into a similar complex PhODyI₂(THF)₄, whereas 1 gives a mixture of PhONdI₂(THF)₄, (PhO)₂NdI(THF)₅, NdI₃(THF)₃, and [NdI(H)R(THF)]. A plausible pathway of the reactions including the intermediate formation of extremely reactive monovalent lanthanide iodides LnI is discussed.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Crystal structures of [Hg(<Emphasis Type="Italic">N</Emphasis>-ethylthiourea)<Subscript>2</Subscript>(CN)<Subscript>2</Subscript>] and [Hg(<Emphasis Type="Italic">N</Emphasis>-propylthiourea)<Subscript>2</Subscript>(CN)<Subscript>2</Subscript>]

Two mercury(II) cyanide complexes of N-ethylthiourea (Ettu) and N-propylthiourea (Prtu) ligands, [Hg(Ettu)₂(CN)₂] (1) and [Hg(Prtu)₂(CN)₂] (2), were prepared and their crystal structures were determined by X-ray crystallography. In both structures, the mercury atom is coordinated to two sulfur atoms of thioureas and two cyanide carbon atoms in a pseudo-tetrahedral mode with the bond angles in the range of 90.52(11)–162.2(3)°. The structures are stabilized by N-H—S, N-H—N, and C-H—N intramolecular and intermolecular hydrogen bonds.     

Complexes of neodymium and dysprosium triiodides with amines. Molecular structures of the {Dy[Me2N(CH2)3NH2]8}I3, NdI3(PriNH2)4, and NdI3(PriNH2)5 complexes

The dissolution of DyI₂ in diamine Me₂N(CH₂)₃NH₂ (DMDA) is accompanied by the disproportionation of the salt, hydrogen evolution, and oxidation of Dy^II to Dy^III. The [Dy(DMDA)₈]I₃ complex (1) was isolated from the solution. The neodymium amide amine complex (PrⁱNH)NdI₂(IPA)₄ was produced by the reaction of NdI₂ with isopropylamine (IPA). The recrystallization of this complex from IPA afforded the NdI₃(IPA)₄ complex (2). The recrystallization of (PrⁱNH)NdI₂(IPA)₄ from a toluene-IPA mixture gave the complex with five amine ligands, NdI₃(IPA)₅ (3). The structures of compounds 1, 2, and 3 were established by X-ray diffraction. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1674–1679, September, 2007.     

Pyrrole alkaloids from <Emphasis Type="Italic">Alhagi sparsifolia</Emphasis>

The novel pyrrole alkaloid alhagifoline A (1) together with the two known analogs pyrrolezanthine (2) and pyrrolezanthine-6-methyl ether (3) were isolated from the aerial part of Alhagi sparsifolia. Their structures were established based on spectral (HR-ESI-MS, ¹ H and ¹³C NMR, ¹ H–¹ H COSY, HSQC, HMBC) data. Compounds 2 and 3 were isolated from the genus Alhagi for the first time.     

Solvothermal Syntheses,Crystal Structures,and Properties of New [Mn(<Emphasis Type="BoldItalic">dien</Emphasis>)<Subscript>2</Subscript>]<Superscript>2+</Superscript> Complexes

Summary.  The two new compounds Mn(dien)₂[MoS₄] (1) and Mn(dien)₂[Mo₂O₂S₆] (2) (dien = diethylenetriamine) were prepared under solvothermal conditions. Both compounds were obtained as phase-pure products. The structures consist of new [Mn(dien)₂]²⁺ cations and isolated tetrahedral [MoS₄]²⁻ (1) or [Mo₂O₂S₆]²⁻ (2) anions. Between the anions and the cations, hydrogen bonding is observed. Compound 1 crystallizes in the tetragonal space group I (a = 10.219(2), c = 9.259(2) ?, Z = 2), whereas 2 crystallizes in the monoclinic space group P2₁/c (a = 8.703(2), b = 18.390(4), c = 14.603(3) ?, β = 103.18(3)°, Z = 4). The thermal behaviour of the thiomolybdates was investigated using difference thermoanalysis (DTA) and thermogravimetry (TG). Both compounds decompose under argon with a single endothermic signal in the DTA curve (peak maximum: 252 (1) and 242°C (2)). Received November 5, 2001. Accepted December 27, 2001     

Osmotic and Activity Coefficients of the {<Emphasis Type="Italic">x</Emphasis>ZnCl<Subscript>2</Subscript>+(1−<Emphasis Type="Italic">x</Emphasis>)ZnSO<Subscript>4</Subscript>}(aq) System at 298.15 K

Isopiestic vapor pressure measurements were made for {xZnCl₂+(1−x)ZnSO₄}(aq) solutions with ZnCl₂ molality fractions of x=(0,0.3062,0.5730,0.7969, and 1) at the temperature 298.15 K, using KCl(aq) as the reference standard. These measurements cover the water activity range 0.901–0.919≤a _w≤0.978. The experimental osmotic coefficients were used to evaluate the parameters of an extended ion-interaction (Pitzer) model for these mixed electrolyte solutions. A similar analysis was made of the available activity data for ZnCl₂(aq) at 298.15 K, while assuming the presence of equilibrium amounts of ZnCl⁺(aq) ion-pairs, to derive the ion-interaction parameters for the hypothetical pure binary electrolytes (Zn²⁺,2Cl⁻) and (ZnCl⁺,Cl⁻). These parameters are required for the analysis of the mixture results. Although significant concentrations of higher-order zinc chloride complexes may also be present in these solutions, it was possible to represent the osmotic coefficients accurately by explicitly including only the predominant complex ZnCl⁺(aq) and the completely dissociated ions. The ionic activity coefficients and osmotic coefficients were calculated over the investigated molality range using the evaluated extended Pitzer model parameters.     

Selective synthesis and spectroscopic properties of alkyl-substituted lanthanide(<Emphasis Type="SmallCaps">III</Emphasis>) mono-, di-, and triphthalocyanines

Methods for the selective synthesis of mono-(^RPcLnOAc), di-(^RPc₂Ln), and triphthalocyanines (^RPc₃Ln₂) of rare-earth metals (Ln = Lu, Er, Eu) from symmetrically substituted 2,3,9,10,16,17,23,24-octaalkylphthalocyanines ^RPcH₂ (R = Et, Bu) were developed. The synthesized complexes were characterized by NMR spectroscopy, mass spectrometry, and electronic absorption spectra. The conditions for ¹H NMR spectra recording were optimized. Regularities in changing the spectral properties of the synthesized compounds, depending on the lanthanide nature and the planarity of metal phthalocyanine complexes, were found. tom@org.chem.msu.su Dedicated to Academician A. L. Buchachenko on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2024–2030, September, 2005.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Synthesis,structure, and magnetic properties of the cobalt(<Emphasis Type="SmallCaps">II</Emphasis>) 1,3,5-benzenetricarboxylate layered coordination polymer

The reaction of Co(NO₃)₂·6H₂O with 1,3,5-benzenetricarboxylic acid (H₃btc, trimesic acid) in DMF at 100 °C afforded the coordination polymer [Co₃(dmf)₆(btc)(Hbtc)(H₂btc)]··9H₂O (1) (dmf is N,N′-dimethylformamide, DMF). According to the X-ray diffraction study, the metal-organic coordination polymer is composed of planar honeycomb (6,3) networks, in which the organic benzenetricarboxylate anions and the inorganic Co²⁺ cations play a role of three-connected nodes. Disordered water molecules are intercalated between the layers. A study of the magnetic properties showed the presence of a weak antiferromagnetic coupling between the Co²⁺ ions (S = 3/2). Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1719–1723, September, 2007.     

Accessing HgSe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>S<Subscript><Emphasis Type="Italic">1−x</Emphasis></Subscript> Nanoparticles Using the Single-Source Reagent Me<Subscript>3</Subscript>Si–SeS–SiMe<Subscript>3</Subscript>

Mercury-selenosulfide (HgSe _x S _1-x ) nanoparticles have been synthesized using the single-source reagent Me₃Si–SeS–SiMe₃. The reagent distributes Se²⁻ and S²⁻ to the metal core as the reaction between Me₃Si–SeS–SiMe₃ and mercury acetate occurs via a redox pathway, ultimately giving rise to Se–S bond cleavage. Particles are characterized by EDX, TEM and powder X-ray diffraction analysis in conjunction with UV–Visible absorption spectroscopy. Dedicated to Prof. Dr. Dieter Fenske on the occasion of his 65th birthday.     

Theoretical studies on the pentacoordinate silylenoid PhCH<Subscript>2</Subscript>(NH<Subscript>2</Subscript>)CH<Subscript>3</Subscript>SiLiF

The structures of pentacoordinate silylenoid PhCH₂(NH₂)CH₃SiLiF were studied by density functional theory at the B3LYP/6-31G(d) level. Three equilibrium structures, the three-membered ring (1), the p-complex (2), and the σ-complex (3) structures, were located. Their energies are in the order of 2 > 1 > 3 both in vacuum and in THF. To exploit the stability of PhCH₂(NH₂)CH₃SiLiF, the insertion reactions of 1 and PhCH₂(NH₂)CH₃Si into C–F have been investigated, respectively. The results show that the insertion of PhCH₂(NH₂)CH₃Si is more favorable. To probe the influence of amine-coordination to the stability of PhCH₂(NH₂)CH₃SiLiF, the insertion reaction of PhCH₃CH₃SiLiF was also investigated. The calculations indicate that the insertion of PhCH₃CH₃SiLiF is more favorable than that of 1. So the N atom plays an important role on the stability of silylenoid PhCH₂(NH₂)CH₃SiLiF.     

Oxygen- versus carbon-coordination of the alpha-stabilized phosphorus ylide Ph<Subscript>3</Subscript>P=C(H)R in palladacycles bearing secondary amines

The ortho-metalated complex [Pd(x){κ ² (C,N)-[C₆H₄CH₂NRR′ (Y)}] (2a–4a and 2b–3b) was prepared by refluxing in benzene equimolecular amounts of Pd(OAc)₂ and secondary benzylamine [a, EtNHCH₂Ph; b, t-BuNHCH₂Ph followed by addition of excess NaCl. The reaction of the complexes [Pd(x){κ ² (C,N)-[C₆H₄CH₂NRR′ (Y)}] (2a–4a and 2b–3b) with a stoichiometric amount of Ph₃P=C(H)COC₆H₄-4-Z (Z = Br, Ph) (ZBPPY) (1:1 molar ratio), in THF at low temperature, gives the cationic derivatives [Pd(OC(Z-4-C₆H₄C=CHPPh₃){κ ² (C,N)-[C₆H₄CH₂NRR′(Y)}] (5a–9a, 4b–6b, and 4b′–6b′), in which the ylide ligand is O-coordinated to the Pd(II) center and trans to the ortho-metalated C(6)H(4) group, in an “end-on carbonyl”. Ortho-metallation, ylide O-coordination, and C-coordination in complexes (5a–9a, 4b–6b, and 4b′–6b′) were characterized by elemental analysis as well as various spectroscopic techniques.     

Hexanuclear methanediolate bridged iron(<Emphasis Type="SmallCaps">III</Emphasis>) complex

The hexanuclear complex [Fe₆(O)₂(CH₂O₂) (OOCCMe₃)₁₂ (THF)₂]·THF was synthesized. The characteristic feature of this complex is the presence of the methanedithiolate bridge.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 795–797, March, 2005.     

(Tetramethylcyclobutadiene)cobalt complexes 7. Mono- and dinuclear arene complexes containing the [(C<Subscript>4</Subscript>Me<Subscript>4</Subscript>)Co]<Superscript>+</Superscript> fragment

The mononuclear arene complexes [Cb*Co(arene)]⁺ (3a–g; Cb* = C₄Me₄; arene is biphenyl (a), diphenylmethane (b), 1,2-diphenylethane (c), diphenyl ether (d), p-terphenyl (e), 1,2-dimesitylethane (f), or 1,3-dimesitylpropane (g)) were synthesized by the reactions of arenes either with the benzene complex [Cb*Co(C₆H₆)]⁺ (1) under visible light irradiation or with the acetonitrile derivative [Cb*Co(MeCN)₃]⁺ (2) in refluxing THF. The reactions of 2 with 1,2-diphenyle-thane, 1,3-dimesitylpropane, and p-terphenyl in a ratio of 2: 1 afforded the dinuclear complexes [Cb*Co(μ-η:η-arene)CoCb*]²⁺ (4c,e,g). The stability of the dinuclear arene complexes was estimated by DFT calculations. The structures of the complexes [3a]PF₆ and [3e]PF₆ ere established by X-ray diffraction. For Part 6, see Ref. 1. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 535–539, March, 2008.     

A study of complexation between crystalline <Emphasis Type="Italic">trans</Emphasis>-[Pd(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>] and acetylacetone

Complexation between crystalline trans-[Pd(H₂O)₂(NO₃)₂] and acetylacetone was studied. The complexes Pd₂(Acac)₂(μ-NO₃)₂(I) and Pd₂(Acac)₂(μ-Acac)(μ-NO₃)(II) were obtained and examined by elemental analysis, X-ray powder diffraction analysis, differential scanning calorimetry, simultaneous thermal analysis, mass spectrometry, and vibrational spectroscopy.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.