Synthesis of mono- and trinuclear palladium(II) complexes via oxidative addition of a bulky hexathioether containing a disulfide bond to palladium(0)

The oxidative addition reactions of a bulky hexathioether containing a disulfide bond, TbtS(o-phen)S(o-phen)SS(o-phen)S(o-phen)STbt (1) (Tbt = 2,4,6-tris[bis(trimethylsilyl)methyl]phenyl, o-phen = o-phenylene), to a palladium(0) complex were studied. In the reaction of 1 with 3 molar amounts of [Pd(PPh₃)₄], a trinuclear palladium(II) complex, [Pd₃{S(o-phen)S}₂{(o-phen)STbt}₂(PPh₃)₂] (2), was formed via three-step palladium insertion reaction including unusual C(aryl)-S bond cleavages. On the other hand, the reaction of 1 with an equimolar amount of [Pd(PPh₃)₄] afforded mononuclear palladium(II) complex having a pseudo-octahedral structure, [Pd{S(o-phen)S(o-phen)STbt}₂] (3). The hexa-coordinated geometry for the palladium center in 3 was confirmed by the atoms in molecule (AIM) analysis, which revealed the presence of the bond critical points between the central Pd atom and the S atoms at the axial positions. In contrast to the bulky system, the reaction of Ph-substituted hexathioether, PhS(o-phen)S(o-phen)SS(o-phen)S(o-phen)SPh (4), with an equimolar amount of [Pd(PPh₃)₄] gave a palladium(II) complex having square-planar structure, [Pd{S(o-phen)S(o-phen)SPh}₂] (5). Theoretical calculations revealed that there is no remarkable difference among the energies of isomers of [Pd{S(o-phen)SPh}₂], 6a-syn, 6a-anti, 6b-syn, and 6b-anti. This result suggests that a reason for the preference of the trans-anti-conformation in 3 is the steric repulsion between the bulky Tbt groups, and that of the cis-syn-conformations in 5 and 6 is the intermolecular interactions.     

Uncatalyzed insertion reaction of isocyanides into a carbon-sulfur bond

Tert-butylisocyanide and tert-octylisocyanide insert into the carbone-sulfur bond of activated sulfides 2 yielding thioimidates 5 which rearrange to enamines 6.     

硫醚中碳硫键室温选择性断裂反应的研究

本文研究了在四氟硼酸银存在下, 硫醚与碘甲烷室温下发生碳硫键选择性断裂反应。研究结果表明: 只有当二苄基硫醚的苯环对位连有强的供电子基团甲氧基时, 方可发生碳硫键的断裂。提出了一个离子型反应机理且碳硫键的断裂分三步完成。首先, 硫醚与甲基化试剂反应生成甲基锍盐; 继而, 此锍离子离解成由苄基碳正离子和硫醚组成的离子-偶极集合物; 最后, 甲基化试剂再进攻集合物中的硫醚, 从而导致碳硫键的断裂。     

Mechanistic studies of the O2-dependent aliphatic carbon-carbon bond cleavage reaction of a nickel enolate complex

The mononuclear nickel(II) enolate complex [(6-Ph(2)TPA)Ni(PhC(O)C(OH)C(O)Ph]ClO(4) (I) was the first reactive model complex for the enzyme/substrate (ES) adduct in nickel(II)-containing acireductone dioxygenases (ARDs) to be reported. In this contribution, the mechanism of its O(2)-dependent aliphatic carbon-carbon bond cleavage reactivity was further investigated. Stopped-flow kinetic studies revealed that the reaction of I with O(2) is second-order overall and is ～80 times slower at 25 °C than the reaction involving the enolate salt [Me(4)N][PhC(O)C(OH)C(O)Ph]. Computational studies of the reaction of the anion [PhC(O)C(OH)C(O)Ph](-) with O(2) support a hydroperoxide mechanism wherein the first step is a redox process that results in the formation of 1,3-diphenylpropanetrione and HOO(-). Independent experiments indicate that the reaction between 1,3-diphenylpropanetrione and HOO(-) results in oxidative aliphatic carbon-carbon bond cleavage and the formation of benzoic acid, benzoate, and CO:CO(2) (～12:1). Experiments in the presence of a nickel(II) complex gave a similar product distribution, albeit benzil [PhC(O)C(O)Ph] is also formed, and the CO:CO(2) ratio is ～1.5:1. The results for the nickel(II)-containing reaction match those found for the reaction of I with O(2) and provide support for a trione/HOO(-) pathway for aliphatic carbon-carbon bond cleavage. Overall, I is a reasonable structural model for the ES adduct formed in the active site of Ni(II)ARD. However, the presence of phenyl appendages at both C(1) and C(3) in the [PhC(O)C(OH)C(O)Ph](-) anion results in a reaction pathway for O(2)-dependent aliphatic carbon-carbon bond cleavage (via a trione intermediate) that differs from that accessible to C(1)-H acireductone species. This study, as the first detailed investigation of the O(2) reactivity of a nickel(II) enolate complex of relevance to Ni(II)ARD, provides insight toward understanding the chemical factors involved in the O(2) reactivity of metal acireductone species.     

Catalytic C-C bond cleavage and C-Si bond formation in the reaction of RCN with Et3SiH promoted by an iron complex

Catalytic C-C bond cleavage of acetonitrile and C-Si bond formation have been attained in the photoreaction of MeCN with Et3SiH in the presence of an iron complex, Cp(CO)2FeMe. This catalytic system can be applied for arylnitrile C-C bond cleavage.     

C-S bond cleavage of pyridine-2-thiol: a new functionality of quadruply bridged dinuclear platinum and palladium complexes

Treatment of pyridine-2-thiol (pytH) with H(2) (60 atm) in the presence of 5-methylpyridine-2-thiolate (5-mpyt)-bridged dinuclear Pt(III), Pt(II), or Pd(II) complexes (1 mol %) in DMF at 150 degrees C for 72 h leads to the formation of pyridine in 3-51% yield. From the (1)H NMR study of the exchange reactions and of the products under D(2) pressure, it is suggested that the catalytic reaction involves bimetallic activation of the pyt ligand followed by the liberation of pyridine and H(2)S.     

Benzyl radical addition reaction through the homolytic cleavage of a benzylic C-H bond

Direct generation of a benzyl radical by C-H bond activation of toluenes and the addition reaction of the resulting radical to an electron deficient olefin were developed. The reaction of dimethyl fumarate with toluene in the presence of Et(3)B as a radical initiator at reflux afforded 2-benzylsuccinic acid dimethyl ester in good yield.     

Synthesis and structure of a distorted octahedral palladium(II) complex coordinated with a tetrathioether ligand tethered with bulky substituents

A new type of an o-phenylene-bridged tetrathioether ligand tethered with extremely bulky substituents, 2,4,6-tris[bis(trimethylsilyl)methyl]phenyl (Tbt) groups, at its terminal sulfur atoms, TbtS[(o-phenylene)S]3Tbt (1), was synthesized by taking advantage of the coupling reaction of thiols with iodobenzenes using Cu2O in 2,4,6-trimethylpyridine. Complexation of 1 with Na2PdCl4 gave the corresponding dichloropalladium(II) complex, [PdCl2(1)] (7). The X-ray structural analysis of 7 indicated that the central palladium metal is in a distorted octahedral environment, where the two inner sulfur atoms of 1 and the two chlorine atoms form a square planar arrangement around the palladium metal and the two terminal sulfur atoms of 1 weakly coordinate to the palladium center at the axial positions. In addition, a phenyl analogue of 1, PhS[(o-phenylene)S]3Ph (2), was synthesized by a method similar to that for 1. Reaction of 2 with Na2PdCl4 gave the corresponding dichloropalladium(II) complex, [PdCl2(2)] (8). X-ray crystallography of 8 showed a type of the structure different from the distorted octahedral structure in 7, i.e., a square planar arrangement around the central palladium atom with the one terminal sulfur atom of 2, its neighboring sulfur atom, and the two chlorine atoms. The results of the NMR studies on 8 in a CDCl3 solution were not consistent with the results of the X-ray crystallography and suggested the coordination of the two inner sulfur atoms of 2 to the palladium metal, although a possibility of the existence of the rapid interconversion among isomers could not be excluded.     

A ruthenium-catalyzed reaction of aromatic ketones with arylboronates: a new method for the arylation of aromatic compounds via C-H bond cleavage

The ruthenium-catalyzed reaction of aromatic ketones with arylboronic acid esters (arylboronates) gave the ortho arylation product. For this coupling reaction, a RuH2(CO)(PPh3)3 complex exhibited the highest catalytic activity among the complexes screened. Several aromatic ketones, for example, acetophenones, acetonaphthone, alpha-tetralone, and benzosuberone, can be used in this coupling reaction. A variety of arylboronates containing electron-donating (OMe and NMe2) and -withdrawing (F and CF3) groups were found to react with aromatic ketones to give the corresponding aylation products. The corresponding arylboronic acids could be used in this coupling reaction, but the yields were slightly lower, as compared to those of the reaction using the corresponding arylboronates.     

Oxidative heck-type reaction involving cleavage of a carbon-phosphorus bond of arylphosphonic acids

Cleavage of a carbon-phosphorus bond is achieved under palladium catalysis in an oxidative Heck-type reaction which exploits arylphosphonic acids. The reaction of arylphosphonic acids with alkenes provides arylation products in good yields in the presence of TBAF with trimethylamine oxide as an oxidant.     

Preparation of a palladium dimer with a cobalt-containing bulky phosphine ligand: Its application in palladium catalyzed Suzuki reactions

A palladium dimer with a cobalt-containing phosphine ligand, {(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-(tBu)₂PCCC₆H₄-κC¹)Pd(μ-Cl)}₂ (3), was prepared from the reaction of its monomer precursor, (μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-(tBu)₂PCCC₆H₄-κC¹)Pd(μ-OAc) (2), with LiCl. The crystal structure of 3, determined by X-ray diffraction methods, revealed a doubly chloride-bridged palladium dimeric conformation. Suzuki coupling reactions of bromobenzene with phenylboronic acid were carried out catalytically using these two novel palladium complexes 2 and 3 as catalyst precursors. Factors such as the molar ratio of substrate/catalyst, reaction temperature, base and solvent that might affect the catalytic efficiencies were investigated. As a general rule, the performance is much better by employing 3 than 2 as the catalyst precursor.     

Synthesis of palladium nanoparticles by reaction of filamentous cyanobacterial biomass with a palladium(II) chloride complex

The interaction of cyanobacterial biomass (Plectonema boryanum UTEX 485) with aqueous palladium(II) chloride (PdCl2 degrees ) has been investigated at 25-100 degrees C for up to 28 days. We report that the release of organic materials from the cyanobacteria promoted the precipitation of Pd(0) as crystalline spherical and elongate nanoparticles (< or =30 nm), both in solution and as dispersed and encrusted nanoparticles on cyanobacterial cells. In contrast, under abiotic conditions at 100 degrees C, palladium hydride (PdHx) was the principal palladium phase precipitated, with only minor amounts of palladium metal.     

Macroporous polystyrene-supported palladium catalyst containing a bulky N-heterocyclic carbene ligand for Suzuki reaction of aryl chlorides

Macroporous polystyrene (MPS)-supported 1-mesitylimidazolium chloride resin was prepared by reacting macroporous chloromethyl polystyrene with 1-mesitylimidazole as a supported N-heterocyclic carbene (NHC) precursor for the immobilization of a palladium catalyst. This MPS-supported NHC precursor readily formed a stable complex with Pd(OAc)2, which effectively catalyzed the Suzuki reaction of aryl iodide and bromides at room temperature and even aryl chlorides at elevated temperatures (100 degrees C). This catalyst showed reusability in the Suzuki reaction of aryl bromide.     

Sequential N-O and N-N bond cleavage of N-heterocyclic carbene-activated nitrous oxide with a vanadium complex

Chemically induced bond cleavage of nitrous oxide typically proceeds by rupture of the N-O bond with concomitant O-atom transfer and liberation of dinitrogen. On a few occasions, N-N bond scission has been observed instead. We report a reaction sequence involving an N-heterocyclic carbene and a vanadium complex that results in cleavage of both the N-O bond and the N-N bond.