The effect of the anion fraction on the physicochemical properties of EMIm(HF)nF (n = 1.0-2.6)

A series of molten salts EMIm(HF)nF's with different n values has been synthesized by the reaction of EMImHF(2) and anhydrous hydrogen fluoride. The salts contain EMIm cation and some oligomeric fluorohydrogenate anions, (HF)nF-, of which the fraction changes with the change of n. A phase diagram of EMIm(HF)nF's (n = 1.0-2.6) has been constructed which suggests the presence of the stoichiometric compounds, EMIm(HF)1.5F and EMIm(HF)2F, in this range. Compared to the EMIm(HF)2.3F previously reported, EMIm(HF)nF's (n = 1.8-2.0) possess wider liquid temperature ranges because of their similar melting points and superior thermal stabilities at elevated temperatures. The electrochemical windows of EMIm(HF)nF's (n = 1.0-2.6) falls in the range of 2.9-3.4 V. The conductivity of EMIm(HF)nF's (n = 1.0-2.6) increases with the increase of n.     

Reversible bromide-chloride exchange in zirconium cluster compounds: synthesis by means of ionic liquids, structures, and some spectral data of (EMIm)(4)[(Zr(6)Z)Br(18)] cluster phases (Z = Be, Fe)

The solid-state precursor cluster chlorides Na(4)[(Zr(6)Be)Cl(16)] and K[(Zr(6)Fe)Cl(15)] readily dissolve in Lewis-basic ionic liquids consisting of mixtures of EMIm-Br and AlBr(3) (EMIm: 1-ethyl-3-methyl-imidazolium) to give dark colored solutions. From these solutions, the cluster phases (EMIm)(4)[(Zr(6)Fe)Br(18)] (1) and (EMIm)(4)[(Zr(6)Be)Br(18)] (2) were obtained in acceptable yields. Crystallographic data of the isostructural phases are the following: monoclinic, P2(1)/c, Z = 2. The data for 1 follow: a = 10.5746(4) Angstrom, b = 22.6567(9) Angstrom, and c = 13.0260(5) Angstrom, beta = 111.279(2) degrees. The data for 2 follow: a = 10.574(2) Angstrom, b = 22.681(4) Angstrom, and c = 13.041(2) Angstrom, beta = 111.31(2) degrees. Compound 1 is the first detailed structurally characterized molecular Fe-centered zirconium bromide cluster phase. In the bromide based ionic liquid, a complete exchange of all the outer and inner chlorides by bromide takes place. Since the inverse reaction, the exchange of all bromides by chlorides, was reported before, this complete ligand exchange can be considered as reversible, with the equilibrium being largely determined by the free ligand concentration. The electronic spectra of a chloride supported cluster precursor in different ionic liquids were measured and analyzed.     

Properties of fluorosulfate-based ionic liquids and geometries of (FO2SOH)OSO2F- and (FO2SOH)2O2SOF-

A room temperature ionic liquid (IL) based on the fluorosulfate anion (SO(3)F(-)) has been synthesized by the reaction of 1-ethyl-3-methylimidazolium (EMIm(+)) chloride and fluorosulfuric acid (HOSO(2)F). The viscosity, ionic conductivity, and electrochemical window of EMImSO(3)F at 25 °C are 46.6 mPa s, 10.8 mS cm(-1), and 4.3 V, respectively. According to a solvatochromic measurement using ILs, there is a trend in the donor ability of fluoro- and oxofluoroanions, PF(6)(-) < BF(4)(-) < N(SO(2)CF(3))(2)(-) < SO(3)CF(3)(-) < SO(3)F(-) < PO(2)F(2)(-), which is explained by the atomic charges obtained from quantum mechanical calculations. The 1 : 2 and 1 : 3 stoichiometric reactions of EMImCl and HOSO(2)F give EMIm(FO(2)SOH)OSO(2)F and EMIm(FO(2)SOH)(2)O(2)SOF, respectively. Both the salts are liquid at room temperature without a HOSO(2)F dissociation pressure (< 1 Pa) and have low viscosity and high ionic conductivity (9.2 mPa s and 30.8 mS cm(-1) for EMIm(FO(2)SOH)OSO(2)F and 5.1 mPa s and 43.2 mS cm(-1) for EMIm(FO(2)SOH)(2)O(2)SOF). The vibrational modes and bonding properties of these anionic species are discussed with the aid of quantum mechanical calculations. The (FO(2)SOH)OSO(2)F(-) anion in EMIm(FO(2)SOH)OSO(2)F does not have an inversion centre, which stands in contrast to the one with an inversion centre (e.g. observed in solid Cs(FO(2)SOH)OSO(2)F). The (FO(2)SOH)(2)O(2)SOF(-) anion in EMIm(FO(2)SOH)(2)O(2)SOF is characterized by vibrational spectroscopy under C(s) symmetry.     

Hydrogen-bond-directing effect in the ionothermal synthesis of metal coordination polymers

Four new cobalt coordination polymers, (EMIm)[Co2(TMA-H)2(44bpy)3]Br 1, (EMIm)[Co(TMA-H)(44bpy)2](44bpy)Br 2, (EMIm)[Co(TMA)(Im-H)]3 and (EMIm)2[Co(TMA)2(TED-H2)] 4, were prepared from 1-ethyl-3-methyl imidazolium bromide (EMIm-Br). All the compounds have similar two-dimensional cobalt trimesate (TMA) coordination layers but different three-dimensional supramolecular architectures that contain one of three potentially ditopic amines, 4,4'-bipyridine (44bpy), imidazole (Im-H) and triethylenediamine (TED). Two-fold interpenetration of hydrogen-bonding networks was found for 1, 2 and 4. The coordination layers of 1 and 2 are neutral while 3 and 4 have anionic molecular assemblies. The use of organic amines, that act as supramolecular bridging ligands, introduces hydrogen-bond-directing effects in the ionothermal synthesis of metal coordination polymers. Hydrogen bonding helps to align the packing between the coordination layers and control the formation of 3D supramolecular networks. In 1, hydrogen bonds between the ionic species within the channels direct the alignment of non-directional electrostatic interactions between EMIm+ and Br(-) ions, which is a rare case of a hydrogen-bond-templating effect of ionic liquids in ionothermal synthesis.     

Magnetic and thermal properties of three ionothermally synthesized metal-carboxylate frameworks of [M3(ip)4][EMIm]2 (M = Co, Ni, Mn, H2ip = isophthalic acid, EMIm = 1-ethyl-3-methyl imidazolium)

Three metal-organic frameworks, [M(3)(ip)(4)][EMIm](2) (M = Co 1, Ni 2, Mn 3, H(2)ip = isophthalic acid, EMIm = 1-ethyl-3-methyl imidazolium) were prepared from an ionic liquid medium. All the compounds feature the same (4(24))(6(4)) topology based on linear trinuclear clusters as eight-connected nodes. Compounds 1 and 2 are isostructural, while compound 3 exhibits a different structure due to the slight difference in the arrangement of M(3)(OOCR)(8) SBUs. Magnetic property measurements reveal that all the compounds display anti-ferromagnetic coupling, where compounds 2 and 3 show isotropic exchange interactions of -0.10 cm(-1) for 2 and -1.6 cm(-1) for 3. Investigation of the thermal diffusivity shows that the thermal diffusivity of 1 is higher than that of 3, while that of 3 is higher than that of 2.     

Syntheses, structures and properties of 1-ethyl-3-methylimidazolium salts of fluorocomplex anions

Fluoroacid-base reactions of a room-temperature ionic liquid, 1-ethyl-3-methylimidazolium fluorohydrogenate (EMIm(HF)2.3F, EMIm = 1-ethyl-3-methylimidazolium cation), and Lewis fluoroacids (BF3, PF5, AsF5, NbF5, TaF5 and WF6) give EMIm salts of the corresponding fluorocomplex anions, EMImBF4, EMImPF6, EMImAsF6, EMImNbF6, EMImTaF6 and EMImWF7, respectively. Attempts to prepare EMImVF6 by both the acid-base reaction of EMIm(HF)2.3F with VF5 and the metathesis of EMImCl with KVF6 failed due to the strong oxidizing power of the pentavalent vanadium, whereas EMImSbF6 was successfully prepared only by the metathesis of EMImCl and KSbF6. EMImBF4, EMImSbF6, EMImNbF6, EMImTaF6 and EMImWF7 are liquids at room temperature whereas EMImPF6 and EMImAsF6 melts at around 330 K. Raman spectra of the obtained salts showed the existence of the EMIm cation and corresponding fluorocomplex anions. IR spectroscopy revealed that strong hydrogen bonds are not observed in these salts. EMImAsF6(mp 326 K) and EMImSbF6(mp 283 K) are isostructural with the previously reported EMImPF6. The melting point of the hexafluorocomplex EMIm salt decreases with the increase of the size of the anion (PF6- < AsF6- < SbF6- 相似文献   

Nuclear magnetic resonance studies on the rotational and translational motions of ionic liquids composed of 1-ethyl-3-methylimidazolium cation and bis(trifluoromethanesulfonyl)amide and bis(fluorosulfonyl)amide anions and their binary systems including lithium salts

Room temperature ionic liquids (ILs) are stable liquids composed of anions and cations. 1-ethyl-3-methyl-imidazolium (EMIm, EMI) is a popular and important cation that produces thermally stable ILs with various anions. In this study two amide-type anions, bis(trifluoro-methanesulfonyl)amide [N(SO(2)CF(3))(2), TFSA, TFSI, NTf(2), or Tf(2)N] and bis(fluorosulfonyl)amide [(N(SO(2)F)(2), FSA, or FSI] were investigated by multinuclear NMR spectroscopy. In addition to EMIm-TFSA and EMIm-FSA, lithium-salt-doped binary systems were prepared (EMIm-TFSA-Li and EMIm-FSA-Li). The spin-lattice relaxation times (T(1)) were measured by (1)H, (19)F, and (7)Li NMR spectroscopy and the correlation times of (1)H NMR, τ(c)(EMIm) (8 × 10(-10) to 3 × 10(-11) s) for the librational molecular motion of EMIm and those of (7)Li NMR, τ(c)(Li) (5 × 10(-9) to 2 × 10(-10) s) for a lithium jump were evaluated in the temperature range between 253 and 353 K. We found that the bulk viscosity (η) versus τ(c)(EMIm) and cation diffusion coefficient D(EMIm) versus the rate 1/τ(c)(EMIm) have good relationships. Similarly, linear relations were obtained for the η versus τ(c)(Li) and the lithium diffusion coefficient D(Li) versus the rate 1∕τ(c)(Li). The mean one-jump distances of Li were calculated from τ(c)(Li) and D(Li). The experimental values for the diffusion coefficients, ionic conductivity, viscosity, and density in our previous paper were analyzed by the Stokes-Einstein, Nernst-Einstein, and Stokes-Einstein-Debye equations for the neat and binary ILs to clarify the physicochemical properties and mobility of individual ions. The deviations from the classical equations are discussed.     

Raman and FTIR Spectroscopic Studies of 1‐Ethyl‐3‐methylimidazolium Trifluoromethylsulfonate,its Mixtures with Water and the Solvation of Zinc Ions

In this paper we report on the interactions of the ionic liquid 1‐ethyl‐3‐methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) with water and the solvation of zinc ions in neat [EMIm]TfO and [EMIm]TfO–water mixtures investigated by FTIR and Raman spectroscopy. The structures and physicochemical properties of the [EMIm]TfO–water mixtures are strongly dependent on the interaction between cations, anions, and water. The structure was changed from ionic‐liquid‐like to water‐like solutions upon addition of water. In addition, zinc salts can precipitate in 0.2 M Zn(TfO)₂/[EMIm]TfO upon addition of 10 % (v/v) water, presumably as a result of polarity change of the solution. The average coordination number of TfO^? per zinc ion calculated from Raman spectra is 3.8 in neat [EMIm]TfO, indicating that [Zn(TfO)₄]^2?, and [Zn(TfO)₃]^? complexes are present in the solution. However, in the presence of water, water interacts preferentially with the zinc ions, leading to aqueous zinc species. The solvation of zinc ions in 1‐butyl‐1‐methylpyrrolidinium trifluoromethylsulfonate ([Py_1,4]TfO) was also investigated. In [Py_1,4]TfO, there are, on average, 4.5 TfO^? anions coordinating each zinc ion, corresponding to the weak interaction between [Py_1,4]⁺ cations and TfO^? anions. The species present in [Py_1,4]TfO are likely a mixture of [Zn(TfO)₄]^2? and [Zn(TfO)₅]^3?.     

XIm][FeI(CO)(3)(SnI(3))(2)] (XIm: EMIm, EHIm, PMIm) containing a barbell-shaped FeSn(2)-carbonyl complex

By reacting Fe(CO)(5) and SnI(4) in the ionic liquids [XIm][NTf(2)] (XIm: 1-ethyl-3-methylimidazolium/EMIm, 1-ethyl-imidazolium/EHIm, 1-propyl-3-methylimidazolium/PMIm; NTf(2): bistrifluoridomethansulfonimide), the compounds [XIm][FeI(CO)(3)(SnI(3))(2)] are obtained as transparent, dark red crystals. According to single-crystal structure analysis, the title compounds crystallize monoclinically and contain the anionic carbonyl complex [FeI(CO)(3)(SnI(3))(2)](-) as well as [EMIm](+), [EHIm](+) or [PMIm](+) cations. The anionic carbonyl is composed of a Sn-Fe-Sn barbell-shaped building unit with Fe-Sn distances of 252.0(1) pm. Herein, tin is coordinated distorted tetrahedrally by iodine; iron is coordinated pseudo-octahedrally by three carbonyl ligands, one iodine atom and two tin atoms. Bonding situation and valence state are investigated in detail for [EMIm][FeI(CO)(3)(SnI(3))(2)] based on bond-lengths considerations, infrared spectroscopy, M?ssbauer spectroscopy, density functional theory and DFT-based Mulliken population analysis. Hence, the formal oxidation state of the metal atoms can be concluded to Fe(±0) and Sn(3+).     

Electrodeposition of Al,Zn, and Pt on silver-coated textile fibres from ionic liquids

In the present paper, we report on the electrodeposition of aluminium, zinc and platinum on silver-coated textile fibres from ionic liquids. For electrodeposition of Al, the 60:40 mol% mixture of AlCl₃/1-ethyl-3-methylimidazolium chloride ([EMIm]Cl) and 1.7 M AlCl₃ in 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([Py_1,4]TFSA) were employed. It was observed that microcrystalline aluminium was electrodeposited on the textile fibres in 60:40 mol% AlCl₃/[EMIm]Cl. The deposited Al layers either on single fibres or on textile assemblies are well adherent and uniform. An adherent, homogeneous and nanocrystalline Al layer was obtained on the silver-coated textile samples from 1.7 M AlCl₃/[Py_1,4]TFSA at 75 °C. The obtained Al layers from 60:40 mol% AlCl₃/[EMIm]Cl on the textile fibres exhibit a good corrosion resistance in an aqueous iodide/iodine electrolyte. Furthermore, we obtain Al microtubes from the investigated ionic liquids after dissolving the textile fibres. In addition, zinc electrodeposition was carried out on the textile samples from 60:40 mol% ZnCl₂/[EMIm]Cl at 80 °C. The electrodeposition of platinum on the textiles was done from 50 mM PtCl₂ in 1-butyl-1-methylpyrrolidinium dicyanamide ([Py_1,4]DCA).     

Electrodeposition of nano- and microcrystalline aluminium in three different air and water stable ionic liquids.

The present work shows, for the first time, a comparative experimental study on the electrodeposition of aluminium in three different water and air stable ionic liquids, namely 1-butyl-1-methylpyrrolidinium-bis(trifluoromethylsulfonyl)imide ([BMP]Tf2N), 1-ethyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imide ([EMIm] Tf2N), and trihexyl-tetradecyl-phosphoniumbis(trifluoromethylsulfonyl)imide (P(14,6,6,6) Tf2N). The ionic liquids [BMP]Tf2N and [EMIm]Tf2N show biphasic behaviour in the AlCl3 concentration range from 1.6 to 2.5 mol L(-1) and 2.5 to 5 mol L(-1), respectively. The biphasic mixtures become monophasic at temperatures >/=80 degrees C. It was found that nanocrystalline aluminium can be electrodeposited in the ionic liquid [BMP]Tf2N saturated with AlCl3. The deposits obtained are generally uniform, dense, shining, and adherent with very fine crystallites in the nanometer size regime. However, coarse cubic-shaped aluminium particles in the micrometer range are obtained in the ionic liquid [EMIm]Tf2N. In this liquid the particle size significantly increases as the temperature rises. A very thin, mirrorlike aluminium film containing very fine crystallites of about 20 nm is obtained in the ionic liquid [trihexyl-tetradecyl-phosphonium]Tf(2)N at room temperature. At 150 degrees C, the average grain size is found to be 35 nm.     

Insights into structure–property relationships in ionic liquids using cyclic perfluoroalkylsulfonylimides

Room temperature ionic liquids of cyclic sulfonimide anions ncPFSI (ring size: n = 4–6) with the cations [EMIm]⁺ (1-ethyl-3-methylimidazolium), [BMIm]⁺ (1-butyl-3-methylimidazolium) and [BMPL]⁺ (BMPL = 1-butyl-1-methylpyrrolidinium) have been synthesized. Their solid-state structures have been elucidated by single-crystal X-ray diffraction and their physicochemical properties (thermal behaviour and stability, dynamic viscosity and specific conductivity) have been assessed. In addition, the ion diffusion was studied by pulsed field gradient stimulated echo (PFGSTE) NMR spectroscopy. The decisive influence of the ring size of the cyclic sulfonimide anions on the physicochemical properties of the ILs has been revealed. All ILs show different properties compared to those of the non-cyclic TFSI anion. While these differences are especially distinct for ILs with the very rigid 6cPFSI anion, the 5-membered ring anion 5cPFSI was found to result in ILs with relatively similar properties. The difference between the properties of the TFSI anion and the cyclic sulfonimide anions has been rationalized by the rigidity (conformational lock) of the cyclic sulfonimide anions. The comparison of selected IL properties was augmented by MD simulations. These highlight the importance of π⁺–π⁺ interactions between pairs of [EMIm]⁺ cations in the liquid phase. The π⁺–π⁺ interactions are evident for the solid state from the molecular structures of the [EMIm]⁺-ILs with the three cyclic imide anions determined by single-crystal X-ray diffraction.

Ionic liquids with three cyclic perfluoroalkylsulfonylimide anions that are related to the bis(trifluoromethylsulfonyl)imide anion are described, which show the importance of conformational flexibility on IL properties.     

Sonochemical formation of iron oxide nanoparticles in ionic liquids for magnetic liquid marble

Ionic liquids (ILs)-stabilized iron oxide (Fe(2)O(3)) nanoparticles were synthesized by the ultrasonic decomposition of iron carbonyl precursors in [EMIm][BF(4)] without any stabilizing or capping agents. The Fe(2)O(3) nanoparticles were isolated and characterized by X-ray powder diffraction, transmission electron microscopy and susceptibility measurements. The physicochemical properties of ILs containing magnetic Fe(2)O(3) nanoparticles (denoted as Fe(2)O(3)@[EMIm][BF(4)]), including surface properties, density, viscosity and stability, were investigated in detail and compared with that of [EMIm][BF(4)]. The Fe(2)O(3)@[EMIm][BF(4)] can be directly used as magnetic ionic liquid marble by coating with hydrophobic and unreactive polytetrafluoroethylene (PTFE), for which the effective surface tension was determined by the puddle height method. The resulting magnetic ionic liquid marble can be transported under external magnetic actuation, without detachment of magnetic particles from the marble surface that is usually observed in water marble.     

Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran

A new apparatus for the determination of VLE has been constructed which works for absolute pressure measurements as well as for measuring differential pressures. The first results obtained are (vapor + liquid) equilibria (VLE) of binary mixtures containing acetonitrile or tetrahydrofuran and the ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIm][NTf2] by using the absolute pressures method. VLE measurements were carried out over the whole concentration range at four different temperatures between 293.15 K and 313.15 K. Activity coefficients (γ₁) of the solvents in [EMIm][NTf2] and their osmotic coefficients (ϕ₁) have been determined from the VLE data.     

Structural Investigations and Thermal Behavior of (EMIm)[Cr(C2O4)2]·2H2O [1‐Ethyl‐3‐methylimidazolium Chromium(III) Dioxalate Dihydrate]

The crystal structure of EMIm diaquobis(μ‐oxalato)chromate(III) (1‐ethyl‐3‐methylimidazolium chromium(III) dioxalate dihydrate) was determined from X‐ray single crystal diffraction studies. A pale violet crystal of good optical quality was used for the structure determination at –100(2) and 25(2) °C. The basic crystallographic data for the low temperature structure are as follows: triclinic symmetry, space group P$\bar{1}$ , a = 7.6202(8) Å, b = 9.7668(9) Å, c = 10.7171(11) Å, α = 109.257(9)°, β = 90.494(8)°, γ = 105.685(8)°, V = 720.75(1) Å³. The crystal structure was solved by direct methods and refined (using anisotropic displacement parameters for all non‐hydrogen atoms) to a final residual of R₁ = 0.039 for 2062 independent observed reflections [I > 2σ(I)]. The compound is built up from alternating layers parallel to (010) containing (EMIm)⁺ cations or Cr(C₂O₄)₂(H₂O)₂^– anions, respectively. The two crystallographically independent Cr(C₂O₄)₂(H₂O)₂ octahedra reside on centers of symmetry (Wyckoff sites 1a and 1f). The corners of the octahedra consist of four oxygen atoms from two oxalate groups and two additional water molecules. EMIm⁺ cations provide linkage between different octahedral layers by hydrogen bridging. The water molecules in turn form hydrogen bonds with adjacent octahedra within the same layer. According to DTA/TG experiments the present compound shows several thermal processes in the range between room temperature and 1000 °C. However, pyrolysis is reproducibly yielding pure inorganic composites, qualifying this novel organic‐inorganic hybrid salt also as a stable precursor for nanoscalar ceramic materials. The final product consists of a distinct mixture of Cr₂O₃ and Cr₃C₂ in the molar ratio of 1:1. Concomittant oxide and carbide formation is an unprecedented disintegration pathway of the thermal treatment of oxalatochromates without reducing atmosphere.     

四-对磺酸基-苯基卟啉铁(Ⅲ)的轴向配位快速反应动力学研究

用UnionGikenRA-410温度跃变紫外可见分光光度计研究了二聚的四-对磺酸基-苯基卟啉铁[Fe(Ⅲ)TPPS₄)_D]与咪唑(Im)、2-甲基咪唑(MeIm)、2-乙基-4-甲基咪唑(EMIm)轴向配位快速反应动力学。提出了反应机理,研究了轴向配体和温度对反应的影响,应用Gauss-Newton-Marquardt方法求得基元反应的速率常数及活化参数。     

In situ STM study of zinc electrodeposition on Au(111) from the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethylsulfonate

The electrodeposition of Zn on Au(111) was investigated with cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) in the air and water stable ionic liquid 1-ethyl-3-methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) with a Zn(TfO)₂ concentration of 0.2 M. It has been found that the structure [EMIm]TfO/Au(111) is very complex. Furthermore, the addition of Zn(TfO)₂ changes the interfacial structure significantly. The first STM-probed Zn islands appear at +0.3 V, and their growth leads to the formation of a thin zinc layer. A bulk deposition of Zn is obtained with in situ STM at ?0.1 V. Furthermore, in situ STM reveals that the deposition of Zn is accompanied by the formation of Au-Zn surface alloys.     

Statistic Replacement of Lanthanide Ions in Bis-salicylatoborate Coordination Polymers for the Deliberate Control of the Luminescence Chromaticity

Based on the strand-like coordination polymer (CP) type ¹_∞[Ln(BSB)₃(py)₂], [BSB]⁻=bis-salicylatoborate anion, mixed Eu/Tb-containing compounds of the constitution ¹ _∞ [Eu_xTb_1−x(BSB)₃(py)₂] were synthesised ionothermally for a phase width of (x=0.25–0.75) and characterized regarding structure and optical properties. Previously, known only for other lanthanides, the mixed 1D−Eu/Tb-CPs show excellent options for statistic replacement of the Ln-cations during synthesis yielding solid solutions. The products are highly luminescent, with the chromaticity being a direct function of the amount of the respective Ln-ions. Corresponding to an overall addition of emission intensities, the green Tb³⁺ emission and the red Eu³⁺ emission allow for a chromaticity control that also includes yellow emission. Control of the luminescence colour renders them suitable examples of the versatility of statistic replacement of metal ions in coordination chemistry. In addition, crystallization of [EMIm]₂[YCl₅(py)] illuminates possible other products of the ionothermal reactions of [EMIm][BSB] with LnCl₃ constituted by components not being part of the main CPs.     

离子液体为背景电解质的毛细管电泳-间接紫外检测法同时测定葡萄酒中无机阴离子和阳离子

以离子液体1-乙基-3-甲基咪唑对甲苯磺酸盐([EMIm]TS)为背景电解质,采用双端进样方式,实现了毛细管电泳-间接紫外检测法同时分析测定葡萄酒中无机阳离子(K⁺、Ca²⁺、Na⁺、Mg²⁺和Li⁺)和阴离子(Cl^-、SO■和ClO^-₃)。[EMIm]TS作为电泳缓冲溶液的同时,其阳离子和阴离子分别作为样品中阳离子和阴离子组分的间接紫外检测的背景电解质。在最佳分析条件下,可在6.5 min内完成8种无机离子的同时分离检测,其线性范围为0.005～0.7 g/L,相关系数为0.963～0.995,检出限(S/N=3)为1.2～12.5 mg/L。该方法成功测定了3种不同品牌的市售葡萄酒中8种无机离子。在3个加标水平下,8种无机离子的回收率为90.1%～110.5%,相对标准偏差(RSD)≤4.8%。结果表明,该方法可应用于葡萄酒中无机阴、阳离子的同时分离检测,且方法简单、快速且结果可靠。     

Reversible Carbene Formation in the Ionic Liquid 1‐Ethyl‐3‐Methylimidazolium Acetate by Vaporization and Condensation

The role of N‐heterocyclic carbenes in the chemistry of ionic liquids based on imidazolium salts has long been discussed. Here, we present experimental evidence that 1‐ethyl‐3‐methylimidazolium‐2‐ylidene (EMIm) can coexist with its protonated imidazolium cation (EMImH⁺) at low temperatures. If the vapor of the ionic liquid [EMImH⁺][AcO^?] is trapped in solid argon or nitrogen at 9 K, only acetic acid (AcOH) and the carbene, but no ionic species, are found by IR spectroscopy. This indicates that during the evaporation of [EMImH⁺][AcO^?] proton transfer occurs to form the neutral species. If the vapor of [EMImH⁺][AcO^?] is trapped at 9 K as film in the absence of a host matrix, a solid consisting of EMImH⁺, EMIm, AcO^?, and AcOH is formed. During warming to room temperature the proton transfer in the solid to form back the IL [EMImH⁺][AcO^?] can be monitored by IR spectroscopy. This clearly demonstrates that evaporation and condensation of the IL [EMImH⁺][AcO^?] results in a double proton transfer, and the carbene EMIm is only metastable even at low temperatures.