Cucurbit[6]uril as Ligand for the Complexation of Diamines, Diazacrown Ethers and Cryptands in Aqueous Formic Acid

The complex formation between cucurbit[6]uril and different diamines, diazacrown ethers, and cryptands has been studied in aqueous formic acid solution. The complex stabilities and the thermodynamic values for the complex formation of diamines are reduced if any further donor atom (e.g., sulfur, oxygen, or nitrogen) is present in the molecules. The inclusion of this polar group inside the cavity of cucurbit[6]uril has a negative effect upon the complex formation. Diazacrown ethers and cryptands do not form inclusive complexes. One nitrogen donor atom interacts with the carbonyl groups at one of the portals.     

Cucurbit[6]uril as Ligand for the Complexation of Diamines, Diazacrown Ethers and Cryptands in Aqueous Formic Acid

The complex formation between cucurbit[6]uril and different diamines, diazacrown ethers, and cryptands has been studied in aqueous formic acid solution. The complex stabilities and the thermodynamic values for the complex formation of diamines are reduced if any further donor atom (e.g., sulfur, oxygen, or nitrogen) is present in the molecules. The inclusion of this polar group inside the cavity of cucurbit[6]uril has a negative effect upon the complex formation. Diazacrown ethers and cryptands do not form inclusive complexes. One nitrogen donor atom interacts with the carbonyl groups at one of the portals.     

Complexation of rhodium(II) tetracarboxylates with aliphatic diamines in solution: 1H and 13C NMR and DFT investigations

The complexation of rhodium(II) tetraacetate, tetrakistrifluoroaceate and tetrakisoctanoate with a set of diamines (ethane‐1,diamine, propane‐1,3‐diamine and nonane‐1,9‐diamine) and their N,N′‐dimethyl and N,N,N′,N′‐tetramethyl derivatives in chloroform solution has been investigated by ¹H and ¹³C NMR spectroscopy and density functional theory (DFT) modelling. A combination of two bifunctional reagents, diamines and rhodium(II) tetracarboxylates, yielded insoluble coordination polymers as main products of complexation and various adducts in the solution, being in equilibrium with insoluble material. All diamines initially formed the 2 : 1 (blue), (1 : 1)_n oligomeric (red) and 1 : 2 (red) axial adducts in solution, depending on the reagents' molar ratio. Adducts of primary and secondary diamines decomposed in the presence of ligand excess, the former via unstable equatorial complexes. The complexation of secondary diamines slowed down the inversion at nitrogen atoms in NH(CH₃) functional groups and resulted in the formation of nitrogenous stereogenic centres, detectable by NMR. Axial adducts of tertiary diamines appeared to be relatively stable. The presence of long aliphatic chains in molecules (adducts of nonane‐1,9‐diamines or rhodium(II) tetrakisoctanoate) increased adduct solubility. Hypothetical structures of the equatorial adduct of rhodium(II) tetraacetate with ethane‐1,2‐diamine and their NMR parameters were explored by means of DFT calculations. Copyright © 2013 John Wiley & Sons, Ltd.     

The reaction of diphenyl carbonate with amines and its application to polymer synthesis

Selective formation of biscarbamates from diphenyl carbonate (DPC) and diamines and the preparation of polyurethanes from the carbamates and diols under mild conditions were studied. The reaction of DPC and diamines was significantly affected by catalysts, biscarbamates being exclusively prepared in high yields in the presence of 2-hydroxypyridine. The polycondensation reaction of the biscarbamates with diols was facilitated by catalysts such as metal salts; among the catalysts examined magnesium chloride in pyridine gave the best results. Metal chlorides in pyridine also promoted the reaction of DPC with aromatic amines to give the corresponding ureas, and the direct synthesis of polyureas was achieved by the polycondensation of DPC with diamines in the presence of the chloride.     

Amination of 4,6- and 2,4-dichloropyrimidines with polyamines

Amination of a double excess of 4,6-dichloropyrimidine with various diamines in the presence of cesium carbonate in boiling dioxane quantitatively afforded the corresponding N,N′-bis(6-chloropyrimidin-4-yl) derivatives, while its reactions with tri- and tetraamines gave N,N′,N″-tris- and N,N′,N″,N‴-tetrakis(6-chloropyrimidin-4-yl) derivatives. Equimolar amounts of 2,4-dichloro- or 4,6-dichloropyrimidine and diamines reacted in the presence of Pd(0) complexes to form macrocyclic compounds containing pyrimidine fragments. Catalytic reactions of 4 equiv of diamines with 4,6-dichloropyrimidine can lead to the formation of 4,6-bis-(diamino)pyrimidines. Relations between the yield and the nature of diamine and catalytic system were found.     

Gas chromatographic method for putrescine and cadaverine in shrimp

A gas-liquid chromatographic method developed for the determination of putrescine and cadaverine in fishery products was modified for application to the determination of diamines in shrimp. Addition of potassium chloride and hydrochloric acid to the methanol-water extraction solvent resulted in increased recovery of the diamines and minimized gel formation. The recovery of putrescine increased on average from 64 to 98%, and the recovery of cadaverine increased from 85 to 93%. The chromatographic separation of the derivatized diamines was significantly improved with a change from an OV-225 column (cyanopropyl methyl phenyl methyl silicone) to a more polar HP-Innowax column (crosslinked polyethylene glycol). Background levels of putrescine and cadaverine in known high-quality shrimp ranged from 0 to 0.7 ppm. Shrimp that failed sensory examination generally contained putrescine at levels >4.8 ppm and cadaverine at levels >1.3 ppm.     

Templat-Reaktionen II. Herstellung von tricyclischen und tetracyclischen Metallkomplexen aus aliphatischen Diaminen und Phenylazo-malondialdehyd-Derivaten

Template-Reactions II. Syntheses of tricyclic and tetracyclic metal complexes from aliphatic diamines and phenylazo-malondialdehyde-derivatives A template synthesis of metal complexes with 14- and 16-membered macrocycles 6 resp. 10 has been devised. These compounds are obtained in high yield by the condensation of aliphatic 1,2-or 1,3-diamines with phenylazo-malon-dialdehydes in the presence of divalent metal ions such as Cu(II) and Ni(II). This is the first reported one-step synthesis of tetraaza-annulenes with aliphatic diamines. The formation of the intermediate tricyclic complexes 5 and 9, obtained either by a template or a nontemplate synthesis, is also described. Ring closure with diamines leads again to 6 and 10 or to asymmetric tetraaza-macrocyclic systems such as 7 or 11.     

Small diamines as modifiers for phosphatidylcholine/phosphatidylserine coatings in capillary electrochromatography

Greater stability of liposome coatings and improved resolution of model steroids in capillary electrochromatography (CEC) were sought by adding small diamines (ethylenediamine, diaminopropane, bis-tris-propane, or N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid, HEPES)) to the liposome solution before coating of fused silica capillaries. The phospholipid coatings consisted of 1 mM of 8:2 mol% phosphatidylcholine (PC)/phosphatidylserine (PS) and 5 mM of modifier in buffer solutions (acetate, phosphate, or Tris) at pH 4.0-7.4. The coating was based on a published procedure, and five steroids were used as neutral model analytes in evaluation of the coating. The results showed that under optimal conditions, the small linear diamines increased the packing density of anionic phospholipids, leading to improved separations. In addition, the choice of buffer for the liposome coating and separation appeared to influence the performance of the coatings. While buffers with amino groups take part in the phospholipid bilayer formation, buffers like phosphate may even have negative effect on coating formation. The factors affecting phospholipid coatings with diamines as modifiers are clarified.     

Sulfur-containing polymers. XVIII. Preparation and properties of thiuram polysulfide polymers

Thiuram polysulfide polymers have been prepared from alkali metal bisdithiocarbamates either by oxidation with ammonium persulfate or by polycondensation with sulfur chlorides. In some cases, isothiocyanate formation and/or thiourea formation were noticed. The polymer properties were significantly affected by the diamines used. Polymers derived from p-phenylenediamine decomposed gradually at room temperature with the liberation of elemental sulfur. Polymers based on aliphatic primary diamines were more stable. Piperazine gave the most stable polymer.     

Synthesis and evaluation of polyimides derived from spirobisindane dietheranhydride

Polyimides derived from 5,5′-[(2,2′,3,3′-tetrahydro-3,3,3′,3′-tetramethyl-1,1′-spirobi[1H-indene]-6,6′-diyl)bis(oxy)]bis-1,3-isobenzofurandione (spirobisindane dietheranhydride, SBIDA) and 20 plus aromatic diamines were prepared. The weight percentage of cyclic contaminants in each polyimide, estimated by gel permeation chromatography, ranges from 4 to 25%. The amount of cyclics formed in each polyimide depends on the distance and spatial orientation of the two amino groups on the aromatic diamines as well as the rigidity of the diamines. The formation of SBIDA-containing polyimide was found to be catalyzed by alkali metal ions even when the reaction was conducted in m-cresol. Thermal stability and glass transition temperature of those SBIDA-derived polyimides were examined with thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Two promising compositions were scaled up and their mechanical properties were obtained. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of polyamides of p-phenylenedioxydiacetic acid

Several polyamides of p-phenylenedioxydiacetic acid (PDDA) were synthesized by the low-temperature solution polycondensation techniques. Six different diamines were condensed independently with p-phenylenedioxydiacetyl chloride (PDC) in a mixture of N-methyl pyrolidone (NMP) and hexamethyl phosphoramide (HMPA). The polymers were obtained in 80–95% yield and possessed inherent viscosities in the range 0.32–0.81 dL/g. The polymers were characterized by infrared (IR) and H¹-NMR spectra. The solubility, density, crystallinity, and thermal stability of the polyamides were also determined. A model diamide (MDA-1) was also synthesized from aniline and PDC to confirm the formation of polyamides from diamines.     

Synthesis of polyamides from active 2-benzothiazolyl dithiolesters and diamines under mild conditions

Novel examples were presented of the use in polyamide synthesis of active 2-benzothiazolyl dithiolesters for which aminolysis is assisted by a neighboring group. Solution polycondensation of new dithiolesters, 2,2′-(adipoyldithio)bisbenzothiazole and 2,2′-(isophtahloyldithio)bisbenzothiazole, with both aliphatic and aromatic diamines in polar aprotic solvents (N-methyl-2-pyrrolidone and hexamethylphosphoramide) took place rapidly at room temperature yielding polyamides with high molecular weight. The interfacial polycondensation in a chloroform–water system was also successful for polyamide formation. S,S′-Di-p-nitrophenyl dithioisophthalate reacted much more slowly toward diamines than the 2-benzothiazolyl dithiolesters. Prior to polymer synthesis, the aminolysis of active monothiolesters was carried out as a model compound study.     

Synthesis and Properties of Copolymers Having Polyconjugated Blocks in the Macromolecules. II. The Use of Aromatic N,N′-Bis(nitrosoacetyl)diamines for the Synthesis of Copolymers and Polyazophenylene

Emulsion polymerization of isoprene and styrene with decomposition products of aromatic N,N′-bis(nitrosoacetyl)diamines leads to the formation of copolymers with different contents of polyconjugated blocks in the macromolecules.     

Synthesis of sparteine-like chiral diamines and evaluation in the enantioselective lithiation-substitution of N-(tert-butoxycarbonyl)pyrrolidine

Three chiral diamines were synthesised and evaluated as sparteine surrogates in the lithiation-substitution of N-(tert-butoxycarbonyl)pyrrolidine. The synthesis and attempted resolution of sparteine-like diamines [(1S*,2R*,8R*)-10-methyl-6,10-diazatricyclo[6.3.1.0(2,6)]dodecane and (1S*,2R*,9R*)-11-methyl-7,11-diazatricyclo[7.3.1.0(2,7)]tridecane] (via inclusion complex formation) are reported. Unfortunately, it was only possible to resolve the diazatricyclo[7.3.1.0(2,7)]tridecane compound. An alternative route to (1R,2S,9S)-11-methyl-7,11-diazatricyclo[7.3.1.0(2,7)]tridecane starting from the natural product, (-)-cytisine, is described. This simple three-step route furnished gram-quantities of a (+)-sparteine surrogate. X-Ray crystallography of an intermediate in the route, (1R,5S,12S)-3-methoxycarbonyldecahydro-1,5-methanopyrido[1,2-a][1,5]diazocin-8-one, enabled the stereochemistry of all of the tricyclic diamines described in this paper to be unequivocally established. Two other diamines, starting from (S)-proline and resolved 2-piperidine ethanol, were prepared using standard methods. These diamines lacked the bispidine framework of (-)-sparteine and were found to impart vastly inferior enantioselectivity. It was concluded that, for the asymmetric lithiation substitution of N-Boc pyrrolidine, a rigid bispidine framework and only three of the four rings of (-)-sparteine are needed for high enantioselectivity. Furthermore, it is shown that diamine (1R,2S,9S)-11-methyl-7,11-diazatricyclo[7.3.1.0(2,7)]tridecane is the first successful (+)-sparteine surrogate.     

Chemoenzymatic preparation of optically active trans-cyclohexane-1,2-diamine derivatives: an efficient synthesis of the analgesic U-(-)-50,488

Stereoespecific syntheses of (+/-)-trans-N,N-cyclohexane-1,2-diamines ((+/-)-4 a-g) were carried out from the corresponding (+/-)-trans-N,N-dialkylaminocyclohexanols by successive treatment with mesyl chloride and aqueous ammonia. The stereochemical outcome indicates the formation of a meso-aziridinium ion intermediate. Kinetic resolutions of diamines (+/-)-4 were efficiently accomplished in aminolysis reactions catalyzed by lipase B from Candida antarctica with ethyl acetate as the solvent and acyl donor. Acetamides and the remaining diamines, isolated as the benzyloxycarbonyl derivatives, were obtained with very high ee values (92-99%). One of the carbamates was used as a precursor of the analgesic U-(-)-50,488.     

Synthesis of soluble aromatic polyesteramides by stepwise copolycondensation of bisphenols and aromatic diamines with diphenyl chlorophosphate in pyridine

The reaction promoted by diphenyl chlorophosphate (DPCP) in pyridine was successfully applied to the preparation of soluble aromatic copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, bisphenols, and a wide range of mol % aromatic diamines. Dropwise addition of a mixture of bisphenols and diamines (more favorably of bisphenols and then diamines) to the mixture of dicarboxylic acids activated by DPCP led the reactions homogeneously even with high mol % of diamines to produce copolymers of good solubility. This improved copolymer solubility was roughly estimated by sequence distribution of polyamide and polyester units in the copolymers, which was studied in a model reaction and in the copolycondensations by simultaneous and stepwise addition of bisphenols and diamines.     

Interactions between Protonated Amine, Aza Crown Ether, and Cryptand with Dibenzocrown Ether Studied by a New Spectrophotometric Technique

The stability constants for the complexation of a diprotonated diamine, a diaza crown ether, and a cryptand with dibenzo-18-crown-6 and dibenzo-24-crown-8, have been studied in aqueous solution using a new spectrophotometric technique. Because of the complex formation, the solubility of the dibenzocrown ethers increases. Complex formation is possible between diamines and dibenzocrown ethers with both 1:1 and 2:1 stoichiometry. However, experimental data are insufficient to decide on the actual stoichiometry of the complexes formed. By computing the stability constants and comparing them with the corresponding results for monoamines, it is possible to decide on the actual stoichiometry of the complexes. Under the experimental conditions only 1:1 complexes with diamines are formed.     

Chemical reactions and reactivity of primary,secondary, and tertiary diamines with acid functionalized polymers

Reactive melt processing of different types of diamines with polyethylene containing carboxylic acid groups and polystyrene containing anhydride groups was carried out. The reactivity of primary, secondary, and tertiary diamines with these acid polymers was determined using various techniques. Molecular weight increases due to crosslinking were observed through (1) changes in the torque during the reactive processing, (2) decrease in melt flow indices, and (3) decrease in solubility of the reaction products. The chemical compositions of the reaction products were examined by Fourier transform infrared (FTIR) spectroscopy. Thermal analysis using differential scanning calorimetry (DSC) was carried out to determine the crystallization behavior, glass transition temperatures, and thermal stabilities of the reaction products. Results show that the primary amine is the most reactive towards carboxylic acid or anhydride groups followed by the secondary and then the tertiary amine. Anhydride groups on polymers are of higher activity towards secondary or primary amino groups than carboxylic acid groups in the nucleophilic acyl substitution reactions. Reaction products crosslinked with the primary diamine are less stable than their parent acidic polymers. On the other hand, crosslinking with the secondary or tertiary diamine gives products with higher thermal stability than the parent acidic polymers. The formation of reversible and irreversible crosslinks with different types of diamines is also reported. © 1992 John Wiley & Sons, Inc.     

Divergent 2-Chloroquinazolin-4(3H)-one Rearrangement: Twisted-Cyclic Guanidine Formation or Ring-Fused N-Acylguanidines via a Domino Process

A highly efficient 2-chloroquinazolin-4(3H)-one rearrangement was developed that predictably generates either twisted-cyclic or ring-fused guanidines in a single operation, depending on the presence of a primary versus secondary amine in the accompanying diamine reagent. Exclusive formation of twisted-cyclic guanidines results from pairing 2-chloroquinazolinones with secondary diamines. Use of primary amine-containing diamines permits a domino quinazolinone rearrangement/intramolecular cyclization, gated through (E)-twisted-cyclic guanidines, to afford ring-fused N-acylguanidines. This scalable, structurally tolerant transformation generated 55 guanidines and delivered twisted-cyclic guanidines with robust plasma stability and an abbreviated total synthesis of an antitumor ring-fused guanidine (4 steps, 55 % yield).     

Synthesis and Characterization of Complex Mixtures Consisting of Cyclic and Linear Polyamides from Ethyl Bis-Ketal Galactarates

Bis-ketal-protected diethyl galactarate was condensed with different diamines to prepare sugar-based polyamides. Ketal-protected polyamides, which are soluble in organic solvents, were deprotected with 90% trifluoroacetic acid to yield water insoluble materials. FTIR, NMR, GPC, MALDI-TOF, ESI and TGA techniques were used to characterize the structure and the properties of these biodegradable materials.

D-galactaric acid-based polyamides are complex mixtures of cyclic and linear structures. High molecular weight linear polymer formation was limited by competitive cyclization reactions. The percentage of cyclization was highly dependent on the nature of the diamine used. Polycondensation with linear aliphatic diamines favored the formation of macrocycles, identified by MALDI-TOF and ESI.