Two-photon absorption properties of self-assemblies of butadiyne-linked bis(imidazolylporphyrin)

Supramolecular porphyrin self-assemblies have been prepared from butadiyne-linked bis(imidazolylporphyrin) by complementary coordination of imidazole to zinc, and their two-photon absorption (2PA) and higher-order nonlinear absorption properties were investigated over femtosecond time scales using an open-aperture Z-scan method. The self-assembled porphyrin dimer of the conjugated monozinc bisporphyrin 7D was shown to have a large 2PA cross section (7.6 x 10(3) GM, where 1 GM = 10(-50) cm(4) s molecule(-1) photon(-1)) at 887 nm. By comparison of this result with that for a meso-meso-linked porphyrin array without the butadiyne connection (3.7 x 10(2) GM at 964 nm), it was demonstrated that the predominant factor in this significant enhancement of the cross section was the expansion of porphyrin-porphyrin pi-conjugation. Self-coordination and monozinc metalation were also found to be contributing factors. Furthermore, a novel self-assembled porphyrin polymer 8P consisting of a biszinc complex with a mean molecular weight of M(n) = 1.5 x 10(5) Da was shown to exhibit an extraordinarily large two-photon absorption cross section (4.4 x 10(5) GM at 873 nm). Nanosecond Z-scan experiments for 7D and 8P were also undertaken and resulted in the measurement of large effective 2PA cross sections, including the excited-state absorption (2.1 x 10(5) GM for 7D and 2.2 x 10(7) GM for 8P, respectively). Finally, three-photon absorption was observed by femtosecond Z-scan experiments at 1188 nm (7.1 x 10(-89) m(6) s(2)) and 1282 nm (1.8 x 10(-89) m(6) s(2)), an observation which is the first of its kind in porphyrin chemistry.     

Relationship between two-photon absorption and the pi-conjugation pathway in porphyrin arrays through dihedral angle control

Recently, covalently linked or self-assembled porphyrin array systems have attracted much attention for their enhanced two-photon absorption (TPA) behaviors. In this study, we have investigated the TPA properties of various dihedral angle controlled, directly linked porphyrin dimers and arrays to elucidate the relationship between the pi-conjugation pathway and TPA properties. We have demonstrated a strong correlation between pi-conjugation (aromaticity) and TPA properties in porphyrin assemblies.     

Strong cooperative enhancement of two-photon absorption in double-strand conjugated porphyrin ladder arrays

We present the two-photon absorption (2PA) spectra of a series of conjugated porphyrin oligomers containing N = 2, 4, 8, and ca. 13 monomer units, meso-meso connected with butadiyne linkers. We demonstrate that, in the coplanar double-strand arrays, self-assembled upon addition of 4,4'-bipyridyl, the conjugation length increases dramatically, leading to very strong cooperative enhancement of 2PA. We analyze the scaling of 2PA in both the double-strand and rotationally free single-strand arrays and show how the effective conjugation length in both cases is linked to the observed 2PA properties. By introducing a "conjugation signature" for the 2PA strength, we show that, in double-strand arrangement, the conjugation embraces the whole molecule up to the tetramer level, whereas in single-strand arrangement, it is always less than N, except for N = 2, but keeps increasing until N = 8. Our finding of extremely strong 2PA cross section, sigma2 approximately 105 GM, in double-strand oligomers peaking at 1.3 mum can find use for signal processing in fiber-optic devices.     

Self-assembled monolayers of disulfide Cu porphyrins on Au surfaces: adsorption induced reduction and demetalation

Metalloporphyrin molecules have a wide range of potential applications in diverse technological areas ranging from electronics to optoelectronics, electrochemistry, photophysics, chemical sensors, and catalysis. In particular, self-assembled monolayers of porphyrin molecules have recently attracted considerable interest. In this work we have studied for the first time the self-assembly of a novel Cu deutero porphyrin functionalized with disulfide moieties using electrochemical techniques, UV-vis absorption spectroscopy, polarization modulation infrared reflection absorption spectroscopy, and photoelectron spectroscopies (XPS and UPS). Experimental results indicate that the molecule adsorbs retaining its molecular integrity without forming molecular aggregates via the formation of Au-S covalent bonds. Furthermore, the monolayer consists of a packed array of molecules adsorbed with the plane of the porphyrin molecule at an angle of around 30° with respect to the surface normal. Interestingly, adsorption induces reduction of the Cu center and its consequent removal from the center of the porphyrin ring resulting in porphyrin demetalation. Our results are important in the design of self-assembled monolayers of metallo porphyrins where not only blocking of the metal center by the functional groups that drive the self-assembly should be considered but also possible adsorption induced demetalation with the consequent loss in the properties imparted by the metal center.     

A self-assembled light-harvesting array of seven porphyrins in a wheel and spoke architecture

[reaction: see text]A shape-persistent cyclic array of six zinc porphyrins provides an effective host for a dipyridyl-substituted free base porphyrin, yielding a self-assembled structure for studies of light harvesting. Energy transfer occurs essentially quantitatively from uncoordinated to pyridyl-coordinated zinc porphyrins in the cyclic array. Energy transfer from the coordinated zinc porphyrin to the guest free base porphyrin is less efficient (phitrans approximately 40%) and is attributed to a F?rster through-space process.     

Rational syntheses of cyclic hexameric porphyrin arrays for studies of self-assembling light-harvesting systems.

Two new cyclic hexameric arrays of porphyrins have been prepared in a rational, convergent manner. The porphyrins in each cyclic hexamer are joined by diphenylethyne linkers affording a wheel-like array with a diameter of approximately 35 A. One array is comprised of five zinc (Zn) porphyrins and one free base (Fb) porphyrin (cyclo-Zn(5)FbU) while the other is comprised of an alternating sequence of two Zn porphyrins and one Fb porphyrin (cyclo-Zn(2)FbZn(2)FbU). The prior synthesis employed a one-flask template-directed process and afforded alternating Zn and Fb porphyrins or all Zn porphyrins. More diverse metalation patterns are attractive for manipulating the flow of excited-state energy in the arrays. The rational synthesis of each array employed three Pd-mediated coupling reactions with four tetraarylporphyrin building blocks bearing diethynyl, diiodo, bromo/iodo, or iodo/ethynyl groups. The final ring closure yielding the cyclic hexamer was achieved by reaction of a porphyrin pentamer + porphyrin monomer or the joining of two porphyrin trimers. In the presence of a tripyridyl template, the yields of the 5 + 1 and 3 + 3 reactions ranged from 10 to 13%. The 5 + 1 reaction in the absence of the template proceeded in 3.5% yield, thereby establishing the structure-directed contribution to cyclic hexamer formation. The 3 + 3 route relied on successive ethyne + iodo/bromo coupling reactions. One template-directed route to cyclo-Zn(2)FbZn(2)FbU employed a magnesium porphyrin, affording cyclo-Zn(2)FbZn(2)MgU from which magnesium was selectively removed. The arrays exhibit absorption spectra that are nearly the sum of the spectra of the component parts, indicating weak electronic coupling. Fluorescence spectroscopy showed that the quantum yield of energy transfer in toluene at room temperature from the Zn porphyrins to the Fb porphyrin(s) was 60% in cyclo-Zn(5)FbU and 90% in cyclo-Zn(2)FbZn(2)FbU. Two dipyridyl-substituted porphyrins, a Zn tetraarylporphyrin and a Fb oxaporphyrin, have been synthesized for use as guests in the cyclic hexamers, affording self-assembled arrays for light-harvesting studies.     

Large third-order optical nonlinearity of self-assembled porphyrin oligomers.

Third-order nonlinear optical properties of two series of self-assembled porphyrin wires, one being terminated by zinc porphyrin and the other by free base porphyrin, were measured by femtosecond time-resolved optical Kerr effect. The hyperpolarizability values of the latter series were extremely large ranging from 10-30 to 10-29 esu, 10 times larger than the former. The behavior is accounted for by the contribution of terminal free base porphyrin to enhance the molecular polarization by acceptor nature toward central metalloporphyrin array.     

Two-photon absorption enhancement of polymer-templated porphyrin-based J-aggregates

Supramolecular structures based on organized assemblies of macrocyclic chromophores, particularly porphyrin-based dyes, have attracted widespread interest as components of molecular devices with potential applications in molecular electronics, artificial light harvesting, and pharmacology. We report the formation of J-aggregates of two porphyrin-based dyes, 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TSPP, 4) and an amino tris-sulfonate analogue (5) in water using a functionalized norbornene-based homopolymer, synthesized by ring-opening metathesis polymerization (ROMP). Ionic interactions of the cationic side chains (ammonium groups) of the polymer under acidic conditions with the negatively charged sulfonate groups of the porphyrins facilitated polymer template enhanced J-aggregation of the porphyrin dyes. J-Aggregation behavior was investigated photophysically by UV-vis absorption along with steady-state and time-resolved fluorescence studies. Two-photon absorption (2PA) was enhanced by about an order of magnitude for the J-aggregated TSPP relative to its free base. Significantly, the 2PA cross section of the polymer-templated TSPP J-aggregate was up to three times higher than the J-aggregated TSPP in the absence of the polymer template while the 2PA cross section for polymer-templated J-aggregates of 5 increased substantially, up to ca. 10,000 GM, suggesting a prominent role of polymer-templating to facilitate porphyrin aggregation and greatly enhance nonlinear absorption.     

Strong two-photon absorption in new asymmetrically substituted porphyrins: interference between charge-transfer and intermediate-resonance pathways

We study two-photon absorption (2PA) in two series of new free-base porphyrins with 4-(diphenylamino)stilbene or 4,4'-bis-(diphenylamino)stilbene (BDPAS) attached via pi-conjugating linkers at the porphyrin meso-position. We show that this new substitution modality increases the 2PA cross section in the Soret band region (excitation wavelength 750-900 nm) of the core porphyrin by nearly 2 orders of magnitude, from sigma(2) approximately 10 GM for the meso-phenyl-substituted analogue to sigma(2) approximately 10(3) GM for the ethynyl-linked BDPAS-porphyrin dyad. The 2PA properties are quantitatively described by considering two different and interfering 2PA quantum transition pathways. The first path involves virtual transition via intermediate one-photon resonance. The second path bypasses the intermediate resonance and occurs due to a large permanent dipole moment difference between the ground and the final electronic states. To our best knowledge, this is the first experimental observation of the combined effect of these two pathways on one particular two-photon transition, resulting in quantum-interference-modulated 2PA strength.     

Self-assembly and optical properties of water-soluble porphyrin alternating CdSe nanoparticulate films

A new type of self-assembled film was prepared by alternating deposition of oppositely charged meso-tetra-(4-trimethylaminophenyl) porphyrin nickel iodide (NiTAPPI) and citrate-stabilized CdSe nanoparticles. The stepwise deposition process was monitored by means of UV–vis spectroscopy. The interaction between the porphyrin and CdSe nanoparticles was characterized with UV–vis and fluorescence spectra. The SEM images showed the formation of densely packed two-dimensional array and the conversion of disorder-to-order of CdSe nanoparticles on the quartz substrate modified by PDDA when depositing positively charged NiTAPPI. The self-assembled film placed in ambient air exhibited significant enhancement of fluorescence intensity. The effects of heat treatment and UV-light irradiating on fluorescence properties of the composite films were investigated in details.     

Self-organization of self-assembled tetrameric porphyrin arrays on surfaces

The incorporation of designed self-assembled supramolecular structures into devices requires deposition onto surfaces with retention of both structure and function. This remains a challenge and can present a significant barrier to developing devices using self-organizing materials. To examine the role of peripheral groups in the self-organization of self-assembled multiporphyrinic arrays on surfaces, Pd(II)-linked square and Pt(II)-linked trapezoidal tetrameric porphyrin arrays with peripheral tert-butylphenyl or dodecyloxyphenyl functionalities were investigated using various spectroscopies and atomic force microscopy. The Pd(II) assembled squares disassemble upon deposition on glass surfaces, while the Pt(II) assembled trapezoids are more robust and can be routinely cast on these surfaces. The orientation and length of the peripheral alkyl substituents influence the resultant structures on surfaces. The tert-butylphenyl-substituted porphyrin array forms discrete columnar stacks, which assemble in a vertical direction via pi-stacking interactions among the macrocycles. The tetrameric porphyrin array with dodecyloxyphenyl groups forms a continuous film via van der Waals interactions among the peripheral hydrocarbon chains. The super-molecules with liquid crystal-forming moieties also form three-dimensional crystalline structures at higher deposition concentrations. These observations clearly demonstrate that the number, position, and nature of the peripheral groups and the supramolecular structure and dynamics, as well as the energetics of interactions with the surface, are of key importance to the two-dimensional and three-dimensional self-organization of assemblies such as porphyrin arrays on surfaces.     

系列巯基苯基卟啉自组装膜的光谱和电化学性质

考察了系列巯基苯基卟啉自组装膜的光谱及电化学特征。 结果表明,与溶液中巯基苯基卟啉的光谱相比,自组装膜中卟啉分子的吸收和荧光光谱均发生了明显变化,随着卟啉分子中巯基数目的增加,其荧光峰依次发生红移;不同巯基苯基卟啉自组装膜修饰电极对电解液中电对的电子转移阻碍能力不同,由5,10-二[4-(3-巯基丙氧基)-苯基]-15,20二苯基卟啉形成的卟啉自组装膜的阻碍作用最强,膜表面覆盖度最致密。     

Synthesis of cyclic hexameric porphyrin arrays. Anchors for surface immobilization and columnar self-assembly

To investigate new architectures for the self-assembly of multiporphyrin arrays, a one-flask synthesis of a shape-persistent cyclic hexameric array of porphyrins was exploited to prepare six derivatives bearing diverse pendant groups. The new arrays contain 6-12 carboxylic acid groups, 12 amidino groups, 6 thiol groups, or 6 thiol groups and 6 carboxylic acid groups in protected form (S-acetylthio, TMS-ethyl, TMS-ethoxycarbonyl). The arrays contain alternating Zn and free base (Fb) porphyrins or all Zn porphyrins. The one-flask synthesis entails a template-directed, Pd-mediated coupling of a p/p'-substituted diethynyl Zn porphyrin and a m/m'-substituted diiodo Fb porphyrin. The porphyrin building blocks (trans-A(2)B(2), trans-AB(2)C) contain the protected pendant groups at nonlinking meso positions. A self-assembled monolayer (SAM) of a Zn(3)Fb(3) cyclic hexamer containing one thiol group on each porphyrin was prepared on a gold electrode and the surface-immobilized architecture was examined electrochemically. Together, the work reported herein provides cyclic hexameric porphyrin arrays for studies of self-assembly in solution or on surfaces.     

Synthesis of covalently linked linear porphyrin triad and tetrad containing different porphyrin sub-units

Covalently linked diarylethyne bridged unsymmetrical porphyrin triad containing ZnN₄, N₄, and N₂S₂ porphyrin sub-units and porphyrin tetrad containing ZnN₄, N₄, N₃S, and N₂S₂ porphyrin sub-units were synthesized over sequence of Pd(0) mediated coupling reactions. The triad and tetrad are freely soluble in all common organic solvents and characterized by ES-MS, NMR, absorption, fluorescence, and electrochemical techniques. The ¹H NMR, absorption, and electrochemical studies indicated a weak interaction between the porphyrin sub-units of porphyrin triad and porphyrin tetrad. The steady state and time-resolved fluorescence studies supported an energy transfer from one end of porphyrin array to the other end. This kind of porphyrin arrays containing different porphyrin sub-units will be useful for molecular electronics applications.     

Efficient excitation energy transfer in long meso-meso linked Zn(II) porphyrin arrays bearing a 5,15-bisphenylethynylated Zn(II) porphyrin acceptor

Electronically coupled porphyrin arrays are suitable for artificial light harvesting antenna in light of a large absorption cross-section and fast excitation energy transfer (EET). Along this line, an artificial energy transfer model system has been synthesized, comprising of an energy donating meso-meso linked Zn(II) porphyrin array and an energy accepting 5,15-bisphenylethynylated Zn(II) porphyrin linked via a 1,4-phenylene spacer. This includes an increasing number of porphyrins in the meso-meso linked Zn(II) porphyrin array, 1, 2, 3, 6, 12, and 24 (Z1A, Z2A, Z3A, Z6A, Z12A, and Z24A). The intramolecular singlet-singlet EET processes have been examined by means of the steady-state and time-resolved spectroscopic techniques. The steady-state fluorescence comes only from the acceptor moiety in Z1A-Z12A, indicating nearly the quantitative EET. In Z24A that has a molecular length of ca. 217 A, the fluorescence comes largely from the acceptor moiety but partly from the long donor array, indicating that the intramolecular EET is not quantitative. The transient absorption spectroscopy has provided the EET rates in real time scale: (2.5 ps)(-1) for Z1A, (3.3 ps)(-1) for Z2A, (5.5 ps)(-1) for Z3A, (21 ps)(-1) for Z6A, (63 ps)(-1) for Z12A, and (108 ps)(-1) for Z24A. These results have been well explained by a revised F?rster equation (Sumi formula), which takes into account an exciton extending coherently over several porphyrin pigments in the donor array, whose length is not much shorter than the average donor-acceptor distance. Advantages of such strongly coupled porphyrin arrays in light harvesting and transmission are emphasized in terms of fast EET and a large absorption cross-section for incident light.     

Three-photon absorption in anthracene-porphyrin-anthracene triads: a quantum-chemical study

We have applied correlated quantum-chemical methods to investigate the three-photon absorption (3PA) response of a porphyrin triad derivative, where the central macrocycle is linked in mesopositions to two anthracene units via acetylenic bridges. The 3PA frequency-dependent spectrum of this derivative is dominated by a single resonance feature in the transparent region, associated with charge-transfer states between porphyrin and anthracene. The calculations indicate a two order of magnitude enhancement in the 3PA cross section in the triad molecule with respect to the individual entities, which is attributed to close one-, two-, and three-photon resonances together with strong electronic couplings among the units.     

Synthesis of thiol-derivatized porphyrin dimers and trimers for studies of architectural effects on multibit information storage

We present the rational design and synthesis of multiporphyrin arrays containing thiol-derivatized linkers for the purpose of multibit molecular information storage. Porphyrin dimers and trimers were synthesized by the Pd-mediated coupling of iodo-substituted and ethynyl-substituted porphyrin building blocks in 5-51% yields. Each porphyrin dimer bears one S-acetylthio group. The architecture of the trimers incorporates a trans-substituted porphyrin (central) bearing two S-acetylthio groups and two diphenylethyne-linked porphyrins (wings) in a trans geometry. The central porphyrin and the wing porphyrins bear distinct substituents and central metals, thereby affording different oxidation potentials. The S-acetylthio groups provide a means for attachment of the arrays to an electroactive surface. The dimers are designed for vertical orientation on an electroactive surface while the trimers are designed for horizontal orientation of the central porphyrin. Altogether seven different arrays were synthesized. Each array forms a self-assembled monolayer (SAM) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each array is electrochemically robust and exhibits multiple, reversible oxidation waves. In general, however, the trimeric arrays appear to form more highly ordered monolayers that exhibit sharper, better-defined redox features.     

Influence of carbohydrate biological vectors on the two-photon resonance of porphyrin oligomers

We propose a spectroscopic study of π-conjugated porphyrin dimers and a triphenylamine centered trimer bearing monoethyleneglycol-peracetylated α-mannose targeting moieties, which were synthesized for application to two-photon absorption photodynamic therapy (2PA-PDT). The collected spectroscopic data are explained through comparison with previous results obtained on similar nonvectorized analogues. It appears that the different shifts and variations in linear and nonlinear absorption and emission bands are mainly due to an increased twist between the tetrapyrrolic units. The 2PA properties of the triphenylamine-centered trimer have been studied, and two fluorescence emission bands are observed that seem to originate from two different 2PA excitation pathways. These results have important implication for the design of new vectorized photosensitizers for 2PA-PDT.