碳纳米管负载Pt-Sn-B非晶态催化剂催化氯代硝基苯

 用浸渍-化学还原法制备了碳纳米管负载的Pt-Sn-B非晶态催化剂,并采用透射电子显微镜、X射线衍射、选区电子衍射、X射线能谱等表征手段研究了催化剂在碳纳米管表面的存在状态、组成及其非晶性质. 将此催化剂用于三种氯代硝基苯的液相催化加氢反应,结果表明该催化剂具有较好的加氢性能和较高的抑制脱卤性能. 在不添加脱卤抑制剂的情况下,三种氯代硝基苯的转化率均高于99.8%,脱卤率小于1.9%. 而将通用加氢催化剂用于相同的反应时,产物的脱卤率均高于8%. 碳纳米管的特殊结构与表面金属的非晶性质是影响氯代硝基苯加氢性能的主要因素. 讨论了碳纳米管与表面非晶态金属的作用规律及其与催化加氢性能的关系.     

Ni-Co-B非晶态合金催化剂用于氯代硝基苯液相加氢制氯代苯胺

 用化学还原法制备了 Ni-Co-B 非晶态合金催化剂,并采用透射电子显微镜、扫描电子显微镜、选区电子衍射、X射线衍射、X射线能谱和差热-热重分析等表征手段研究了催化剂的非晶性质和原子组成等. 将此催化剂用于邻氯硝基苯和 3,4-二氯硝基苯的液相催化加氢反应,结果表明,当Co/(Co+Ni)=0.5 (摩尔比)时, Ni-Co-B 催化剂具有较好的加氢性能和较高的抑制脱卤性能. 在不加脱卤抑制剂的情况下,两种氯代硝基苯的转化率均接近100%, 脱卤率分别为1.12%和0.42%, 优于使用 Ni-B 和 Co-B 非晶态合金催化剂时的结果. 还讨论了将Co引入到 Ni-B 非晶态合金催化剂时对其性能的影响.     

Ni-B非晶态合金催化剂用于卤代硝基苯液相加氢制卤代苯胺

 用化学还原法制备了Ni-B非晶态合金催化剂,并将其用于4种卤代硝基苯的液相加氢反应. 采用X射线衍射和透射电子显微镜研究了催化剂的非晶性质. 在373 K下处理2 h后催化剂保持非晶态结构,在773 K下处理2 h后催化剂完全晶化. 讨论了Ni-B非晶态合金催化剂的催化性能与其结构之间的关系,并与其它Ni基催化剂进行了比较. Ni-B非晶态合金催化剂不仅具有较高的催化活性,而且对卤代芳胺的选择性较高,脱卤率小于4%,优于其它Ni基催化剂.     

激光溅射法制备Pt/CNTs催化剂用于邻氯硝基苯的液相加氢反应

采用激光溅射法制备了碳纳米管负载铂(Pt/CNTs)催化剂, 并利用透射电子显微镜(TEM)、X射线能量散射谱(EDS)、X射线衍射(XRD)、X射线光电子能谱(XPS)等表征手段研究了Pt粒子在碳纳米管表面存在的状态、组成、结构等性质. 讨论了Pt/CNTs催化剂的不同制备条件对催化剂结构的影响, 并考察了催化剂对邻氯硝基苯液相加氢合成邻氯苯胺反应的加氢性能. 研究结果表明, 在激光电压为250 V, 绝对压力为300 Pa, 载体温度为25 ℃条件下制备的Pt/CNTs催化剂, 在不加脱卤抑制剂, 反应温度为60 ℃和氢气压力为1.0 MPa的条件下, 邻氯硝基苯转化率可以达到99.7%以上, 邻氯苯胺选择性可达到98.2%以上, 表现出较高的加氢性能和抑制脱卤性能.     

负载型镍基非晶态催化剂催化氯代硝基苯加氢合成氯代苯胺

分别以碳纳米管(CNTs), SiO_2, TiO_2, γ-Al_2O_3, TiO_2-SiO_2和活性炭(AC)为载体(M),以Ni和B为活性组分,采用浸渍-化学还原法制备了一系列负载型Ni-B非晶态合金催化剂(Ni-B/M).采用电感耦合等离子体光谱(ICP), XRD, TEM和DSC研究了Ni-B/CNTs的非晶性质,Ni的担载量及其热稳定性.将Ni-B/M用于催化三种氯代硝基苯液相加氢合成氯代苯胺的反应.结果表明,Ni-B/M在反应中表现出较高的活性和良好的选择性,其中Ni-B/CNTs可使三种氯代硝基苯的转化率均高于99.8%,加氢脱氯率小于3%.讨论了CNTs和Ni-B之间的相互作用对催化剂性能的影响.     

活性炭负载Pt-Fe双金属催化剂催化对氯硝基苯选择性加氢

采用浸渍还原法制备了活性炭负载Pt-Fe双金属催化剂(Pt-Fe/AC),考察了其催化对氯硝基苯加氢性能。 与Pt/AC催化剂比较,该催化剂对催化对氯硝基苯加氢表现出高活性和优异的抑制脱氯性能,在乙醇为溶剂、催化剂Pt_0.003-Fe_0.04/AC(下标为元素在催化剂中的质量分数)用量为0.02 g/g对氯硝基苯、1 MPa H₂和30 ℃条件下反应150 min,对氯硝基苯完全转化为对氯苯胺,而且即使在较高的反应温度和H₂压力下,脱氯反应也得到了完全抑制。 采用X射线衍射(XRD)、透射电子显微镜(TEM)及X射线光电子能谱(XPS)等技术手段对Pt-Fe/AC催化剂进行了表征。 结果表明,Pt、Fe高度分散在活性炭上,Pt与Fe之间的相互作用对纳米Pt粒子的电子结构有一定的调变作用,使纳米Pt处于缺电子态,减弱了Pt与对氯苯胺苯环之间的电子反馈,这可能是Pt-Fe/AC对催化对氯硝基苯加氢表现出高活性和优异的抑制脱氯性能的主要因素。     

稀土在聚合物负载铂催化氢化氯代硝基苯反应中的作用研究

研究了稀土元素对高分子负载Pt催化剂催化氢化氯代硝基苯反应的影响. 结果表明 稀土元素的存在抑制了氯代硝基苯加氢反应活性, 对产物氯代苯胺的选择性有不同程度的提高; 碱NaOH存在时, PVP-Pr-Pt给出了90.8%的邻氯苯胺选择性, 使用PVP-La-Pt时得到97.2%的间氯苯胺选择性, PVP-Ce-Pt催化体系获得了98.2%的对氯苯胺选择性.     

氯代苯胺液相催化加氢合成环己酮

提出了一种催化降解氯代苯胺高选择性合成环己酮的技术.在La修饰Pd/Al2O3催化剂作用下,通过催化加氢的方法实现了由多氯代苯胺(2,4,6-三氯苯胺和2,4,-二氯苯胺)高选择性地合成环己酮(不含环己醇).在优化的反应条件下,2,4,6-三氯苯胺加氢生成环己酮的转化率和选择性分别为100%和98.6%(没有检测到环己醇);2,4,-二氯苯胺加氢生成环己酮的转化率和选择性均为100%.氯代苯胺在Pd/La-Al2O3催化剂表面首先发生加氢脱氯/N-甲基化等反应生成苯胺、N-甲基苯胺和N,N-二甲基苯胺等中间产物,随后这些中间产物发生苯环加氢、氨基水解/醇解等反应得到环己酮;氯代苯胺上Cl元素的存在和体系中水的含量是影响环己酮选择性的重要因素.     

负载型纳米Ni催化剂用于对氯硝基苯选择加氢

以TiO2为载体,N iB为诱导剂,粉末化学镀法制备了负载型纳米N i催化剂.通过TEM、HRTEM、XRD和ICP技术对催化剂物性进行了表征.结果表明,碱性镀液可使载体表面均匀负载微晶结构纳米N i团簇,尺度为35nm左右.该负载型纳米N i在对氯硝基苯选择加氢反应中表现出很高催化加氢活性,并能有效抑制脱氯,达到了工业骨架镍水平.由酸性镀液得到的负载型非晶态纳米N i-P合金具有较弱的催化对氯硝基苯加氢活性.反应温度对反应时间和脱氯率有明显影响.     

以壳聚糖为介质的Ni-B非晶态合金/膨胀石墨的制备及其催化加氢性能

以膨胀石墨担载壳聚糖,采用金属诱导化学镀法制备了负载型Ni-B非晶态合金催化剂.通过X射线衍射、电感耦合等离子体发射光谱、扫描电子显微镜、透射电子显微镜和选区电子衍射等技术研究了壳聚糖对Ni-B催化剂非晶性质、组成、形貌、粒径及分散度的影响.以环丁烯砜加氢制环丁砜和对氯硝基苯加氢制对氯苯胺为探针反应,考察了壳聚糖对负载型Ni-B非晶态合金催化剂催化性质的影响,讨论了壳聚糖用量及水溶性壳聚糖的相对分子质量对催化剂性质的影响.结果表明,壳聚糖介质的引入能够提高活性组分的分散度,减小活性组分的粒径,从而明显提高了催化剂的催化加氢活性.当壳聚糖在载体表面形成单层分散时催化剂活性最高.分子质量相对较低的水溶性壳聚糖有利于生成粒径小、分散性好和催化活性高的Ni-B非晶态合金催化剂.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.