氧化铈负载钌催化剂中钌表面密度对氨合成活性和氢中毒的影响

氨是关系国计民生的大宗化学品,也是氢能源的重要载体.目前,世界合成氨工业每年消耗约2％的世界总能源,并排放超过1％的CO2,节能降耗需求十分迫切,其中的关键在于高性能氨合成催化剂的开发.传统观点认为,B5活性位是钌催化剂上氮解离和氨合成的活性位,当钌粒子尺寸在1.8～2.5 nm时催化剂的B5活性位数量最多,而钌尺寸较小(0.7～0.8 nm)的催化剂几乎没有氨合成活性.本文通过改变钌负载量调变了氧化铈负载钌催化剂的钌表面浓度,证实钌粒子尺寸低于2.0nm时,氧化铈负载钌催化剂也具有较高的氨合成活性.XPS等表征结果证实:钌表面密度低于0.68 Ru nm-2时,钌主要以层状形式存在于氧化铈表面,层状钌与氧化铈紧密接触,电子从氧化铈的缺陷位传递给钌物种,在这种情况下,Ru 3d5/2的结合能有所下降,氮解离能力增强,这有利于提高催化剂的氨合成活性;当钌表面密度约为0.68 Ru nm-2时,钌金属传递电子给氧化铈,此时Ru 3d5/2结合能有所增加;当钌表面密度高于1.4 Ru nm-2后,钌物种优先在层状钌表面聚集成大尺寸钌纳米粒子,此时催化剂中同时存在钌团簇和钌纳米粒子,氧化铈载体对钌粒子电子性质的影响减弱,因此大尺寸钌金属颗粒Ru 3d5/2结合能又有所下降.另一方面,氢分子会在氧化铈表面形成均裂产物(两个OH基团)或异裂产物(Ce-H和OH).同时氢分子还会在0价钌金属表面解离形成氢原子,并进一步溢流到氧化铈表面与氧原子作用形成羟基.钌活性位上的氢物种比氧化铈中的氢更容易脱附,因此氧化铈中钌的存在不仅可以增强其氢吸附量,还降低了氢物种的吸附强度.当钌表面密度低时,氧化铈与钌的相互作用较强,催化剂中的氢物种容易溢流到氧化铈中形成羟基基团,此时催化剂的氢吸附能力增强,氢中毒问题较显著.当钌表面密度较高时,氢原子在大尺寸钌颗粒上移动、反应和脱附,因此催化剂的氢中毒问题也得到显著缓解.总之,对于氧化铈负载钌催化剂,氧化铈与钌金属之间的电子相互作用以及其吸附性质都会影响催化剂的氨合成活性,因此钌表面密度低于0.31 Ru nm-2以及约为2.1 Ru nm-2时,催化剂都展现出了较高的氨合成活性.本文将为设计制备高性能钌基氨合成催化剂提供理论指导.     

CO在担载Ru催化剂上的吸脱附作用及其表面加氢反应

研究了担载于Al_2O_3和ZrO_2上的以Ru_3(CO)_(12)为前体的[Ru]和以RuCl_3为前体的Ru催化剂的TPR特性、CO吸脱附行为及其表面加H_2反应。担载于Al_2O_3上的[Ru]和Ru催化剂上部分物相较担载于ZrO_2上者难于还原。CO在氧化[Ru]催化剂上主要以Ru(CO)yO_2表面络合物形式存在,在还原[Ru]和Ru、以及氧化Ru催化剂上CO以吸附物种形式存在。在Ru离子上的CO比在Ru原子上者难于脱附。以ZrO_2为载体的[Ru]和Ru催化剂上的CO加H_2生成CH_4的性能显著优于以Al_2O_3为载体者,担载[Ru]催化剂上的CO加H_2性能略优于担载Ru催化剂。     

Synthesis, anticancer and antibacterial activity of some novel mononuclear Ru(II) complexes

In search of potential anticancer drug candidates in ruthenium complexes, a series of mononuclear ruthenium complexes of the type [Ru(phen)(2)(nmit)]Cl(2) (Ru1), [Ru(bpy)(2)(nmit)]Cl(2) (Ru2), [Ru(phen)(2)(icpl)]Cl(2) (Ru3), Ru(bpy)(2)(icpl)]Cl(2) (Ru4) (phen=1,10-phenanthroline; bpy=2,2'-bipyridine; nmit=N-methyl-isatin-3-thiosemicarbazone, icpl=isatin-3-(4-Cl-phenyl)thiosemicarbazone) and [Ru(phen)(2)(aze)]Cl(2) (Ru5), [Ru(bpy)(2)(aze)]Cl(2) (Ru6) (aze=acetazolamide) and [Ru(phen)(2)(R-tsc)](ClO(4))(2) (R=methyl (Ru7), ethyl (Ru8), cyclohexyl (Ru9), 4-Cl-phenyl (10), 4-Br-phenyl (Ru11), and 4-EtO-phenyl (Ru12), tsc=thiosemicarbazone) were prepared and characterized by elemental analysis, FTIR, (1)H-NMR and FAB-MS. Effect of these complexes on the growth of a transplantable murine tumor cell line (Ehrlich Ascites Carcinoma) and their antibacterial activity were studied. In cancer study the effect of hematological profile of the tumor hosts have also been studied. In the cancer study, the complexes Ru1-Ru4, Ru10 and Ru11 have remarkably decreased the tumor volume and viable ascitic cell count as indicated by trypan blue dye exclusion test (p<0.05). Treatment with the ruthenium complexes prolonged the lifespan of Ehrlich Ascites Carcinoma (EAC) bearing mice. Tumor inhibition by the ruthenium chelates was followed by improvements in hemoglobin, RBC and WBC values. All the complexes showed antibacterial activity, except Ru5 and Ru6. Thus, the results suggest that these ruthenium complexes have significant antitumor property and antibacterial activity. The results also reflect that the drug does not adversely affect the hematological profiles as compared to that of cisplatin on the host.     

Oxidation behavior of Ru/TiO2 and metallic Ru fine particles on heating in air

Thermogravimetry (TG) and differential thermal analysis (DTA) were used to investigate the oxidation behavior of Ru/TiO2 and metallic Ru fine particles during heating in air in the range 20-1000 degrees C. Temperature ranges of the oxidation for two samples of Ru/TiO2 with the compositions (92 wt% Ru, 8 wt% TiO2) and (75 wt% Ru, 25 wt% TiO2) and for pure metallic Ru fine particle agglomerates were determined. It was assumed that after the partial oxidation of Ru in the sample containing 75 wt% Ru and 25 wt% TiO2 and in the pure metallic Ru a diffusion barrier was formed, preventing further oxidation of Ru in Ru/RuO2 and Ru/RuO2/TiO2 matrices. XRD and TEM were used for the sample characterization.     

Solid-state Ru-99 NMR spectroscopy: a useful tool for characterizing prototypal diamagnetic ruthenium compounds

The feasibility of (99)Ru NMR spectroscopy as a tool to characterize solid compounds is demonstrated. Results of the first solid-state (99)Ru NMR investigation of diamagnetic compounds are presented for Ru(NH(3))(6)Cl(2), K(4)Ru(CN)(6). xH(2)O (x = 0, 3), LaKRu(CN)(6), and Ru(3)(CO)(12). The sensitivity of the ruthenium magnetic shielding tensor to subtle changes in the local structure about the ruthenium nucleus is highlighted by comparing the (99)Ru isotropic chemical shift of Ru(NH(3))(6)Cl(2) in aqueous solutions and in the solid state. The narrow isotropic (99)Ru NMR peak observed for solid Ru(NH(3))(6)Cl(2) indicates that this compound is an ideal secondary reference sample for solid-state (99)Ru NMR studies. The isotropic (99)Ru chemical shift, (99)Ru nuclear quadrupolar coupling constant, C(Q), and quadrupolar asymmetry parameter of K(4)Ru(CN)(6). xH(2)O (x = 0, 3) are shown to be sensitive to x. For Ru(3)(CO)(12), the magnetic shielding tensors of each of the three nonequivalent Ru nuclei have spans of 1300-1400 ppm, and the (99)Ru C(Q) values are also similar, 1.36-1.85 MHz, and are surprisingly small given that (99)Ru has a moderate nuclear quadrupole moment. Information about the relative orientation of the Ru magnetic shielding and electric field gradient tensors has been determined for Ru(3)(CO)(12) from experimental (99)Ru NMR spectra as well as quantum chemical calculations.     

Synthesis and structural characterization of Se-modified carbon-supported Ru nanoparticles for the oxygen reduction reaction

This work is part of a continued research aimed at the understanding of the promoting role of Se in the enhancement of the electrocatalytic activity of Ru in the oxygen reduction reaction. The objective of this paper is to systematically investigate the transformation of Ru nanoparticles upon their modification with the increasing amounts of Se. The Se-modified Ru/C samples with Se:Ru ratio from 0 to 1 were prepared by reacting carbon-supported Ru nanoparticles with SeO2 followed by reductive annealing and characterized using high-resolution transmission electron microscopy, energy-dispersive X-ray, X-ray diffraction analysis, X-ray photoelectron spectroscopy, and extended X-ray absorption fine structure. The results suggest that Se strongly interacts with Ru, resulting in the chemical bond between Ru and Se and formation of Ru selenide clusters whose core at low Se content can be described as Ru2Se2O0.5. At Se:Ru = 1, high-resolution electron microscopy shows evidence of formation of core-shell particles, comprising a hexagonally packed Ru core and a Ru selenide shell with lamellar morphology. Modification of Ru nanoparticles with Se enhances their electrocatalytic activity in the oxygen reduction reaction, which is explained by the role of Se in inhibiting surface oxidation.     

A new structural motif for photoinitiated electron collection: Ru,Rh bimetallics providing insight into H2 production via photocatalysis of water reduction by Ru,Rh,Ru supramolecules

Ru,Rh,Ru complexes are photocatalysts for the reduction of H(2)O to H(2)via a Rh(I) intermediate. The herein reported Ru,Rh bimetallics undergo PEC but do not catalyze the reduction of H(2)O, establishing intact supramolecules are photoactive in the Ru,Rh,Ru systems. The Ru,Rh(I) photoproduct dimerizes via Rh-Rh bond formation, deactivating the Rh(I) center sterically prohibited in the Ru,Rh,Ru trimetallic systems.     

Ruthenium(III) and ruthenium(III)-aminopolycarboxylic acid chelate-catalyzed oxidation of ascorbic acid by molecular oxygen

The kinetics of Ru(III) ion, Ru(III)-EDTA (1:1) and Ru(III)-IMDA (1:1) catalyzed oxidation of ascorbic acid by molecular oxygen are investigated at 25°C, μ = 0.1 M KNO₃, in the pH range 1.50 to 2.75. First-order kinetics were observed with respect to the concentrations of Ru(III) ion, Ru(III)-EDTA, Ru(III)-IMDA and ascorbic acid. The rate of oxidation was found to be inversely proportional to the hydrogen ion concentration. One-half-order and zero-order dependences with respect to the concentration of molecular oxygen were found in the cases of Ru(III) ion and Ru(III)-amino-polycarboxylic acid chelate-catalyzed oxidations, respectively. An inverse relationship was found between the stability and catalytic activity of the Ru(III) chelates of aminopolycarboxylic acids. The catalytic activities of Ru(III) ion and its chelates increase in the order Ru(III)-EDTA < Ru(III)-IMDA < Ru(III). The mechanistic implications of the oxidations catalyzed by Ru(III) ion and its chelates are discussed.     

Synthesis and reactivity of {Ru(p-cymene)}2+ derivatives of [Nb6O19]8-: a rational approach towards fluxional organometallic derivatives of polyoxometalates

Three {Ru(p-cym)}(2+) (p-cym = p-cymene) derivatives of [Nb(6)O(19)](8-)-[Nb(6)O(19){Ru(p-cym)}](6-) (Nb(6)Ru(1)), trans-[Nb(6)O(19){Ru(p-cym)}(2)](4-) (t-Nb6Ru2), and [Nb(6)O(19){Ru(p-cym)}(4)] (Nb(6)Ru(4))--have been synthesized in water by reaction between [Ru(p-cym)Cl(2)](2) and the hexaniobate. In the solid state, Nb(6)Ru(1) and Nb(6)Ru(4) have been characterized by IR and EDX spectroscopies, whereas t-Nb(6)Ru(2) has been characterized by IR spectroscopy and single-crystal X-ray diffraction (crystal data for K(4)-trans-[Nb(6)O(19){Ru(p-cym)}(2)].14H(2)O (K(4)-t-Nb(6)Ru(2).14H(2)O). In solution, all compounds were characterized by (1)H NMR and ESI mass spectrometry analyses, and Nb(6)Ru(1) was also analyzed by (17)O NMR. These studies allowed a comparison of the differences in behaviour of the three complexes in water: Nb(6)Ru(1) is particularly stable, Nb(6)Ru(4) decomposes by loss of {Ru(p-cym)}(2+) fragments, and trans-[Nb(6)O(19){Ru(p-cym)}(2)](4-) isomerizes into cis-[Nb(6)O(19){Ru(p-cym)}(2)](4-). A rational mechanism for the isomerisation of t-Nb(6)Ru(2) is proposed on the basis of a kinetic study.     

Coordination and Redox Chemistry of Substituted-Polypyridyl Complexes of Ruthenium

The complexes [Ru(tpy)(acac)(Cl)], [Ru(tpy)(acac)(H(2)O)](PF(6)) (tpy = 2,2',2"-terpyridine, acacH = 2,4 pentanedione) [Ru(tpy)(C(2)O(4))(H(2)O)] (C(2)O(4)(2)(-) = oxalato dianion), [Ru(tpy)(dppene)(Cl)](PF(6)) (dppene = cis-1,2-bis(diphenylphosphino)ethylene), [Ru(tpy)(dppene)(H(2)O)](PF(6))(2), [Ru(tpy)(C(2)O(4))(py)], [Ru(tpy)(acac)(py)](ClO(4)), [Ru(tpy)(acac)(NO(2))], [Ru(tpy)(acac)(NO)](PF(6))(2), and [Ru(tpy)(PSCS)Cl] (PSCS = 1-pyrrolidinedithiocarbamate anion) have been prepared and characterized by cyclic voltammetry and UV-visible and FTIR spectroscopy. [Ru(tpy)(acac)(NO(2))](+) is stable with respect to oxidation of coordinated NO(2)(-) on the cyclic voltammetric time scale. The nitrosyl [Ru(tpy)(acac)(NO)](2+) falls on an earlier correlation between nu(NO) (1914 cm(-)(1) in KBr) and E(1/2) for the first nitrosyl-based reduction 0.02 V vs SSCE. Oxalate ligand is lost from [Ru(II)(tpy)(C(2)O(4))(H(2)O)] to give [Ru(tpy)(H(2)O)(3)](2+). The Ru(III/II) and Ru(IV/III) couples of the aqua complexes are pH dependent. At pH 7.0, E(1/2) values are 0.43 V vs NHE for [Ru(III)(tpy)(acac)(OH)](+)/[Ru(II)(tpy)(acac)(H(2)O)](+), 0.80 V for [Ru(IV)(tpy)(acac)(O)](+)/[Ru(III)(tpy)(acac)(OH)](+), 0.16 V for [Ru(III)(tpy)(C(2)O(4))(OH)]/[Ru(II)(tpy)(C(2)O(4))(H(2)O)], and 0.45 V for [Ru(IV)(tpy)(C(2)O(4))(O)]/[Ru(III)(tpy)(C(2)O(4))(OH)]. Plots of E(1/2) vs pH define regions of stability for the various oxidation states and the pK(a) values of aqua and hydroxo forms. These measurements reveal that C(2)O(4)(2)(-) and acac(-) are electron donating to Ru(III) relative to bpy. Comparisons with redox potentials for 21 related polypyridyl couples reveal the influence of ligand changes on the potentials of the Ru(IV/III) and Ru(III/II) couples and the difference between them, DeltaE(1/2). The majority of the effect appears in the Ru(III/II) couple. ()A linear correlation exists between DeltaE(1/2) and the sum of a set of ligand parameters defined by Lever et al., SigmaE(i)(L(i)), for the series of complexes, but there is a dramatic change in slope at DeltaE(1/2) approximately -0.11 V and SigmaE(i)(L(i)) = 1.06 V. Extrapolation of the plot of DeltaE(1/2) vs SigmaE(i)(L(i)) suggests that there may be ligand environments in which Ru(III) is unstable with respect to disproportionation into Ru(IV) and Ru(II). This would make the two-electron Ru(IV)O/Ru(II)OH(2) couple more strongly oxidizing than the one-electron Ru(IV)O/Ru(III)OH couple.     

First example of mu(3)-sulfido bridged mixed-valent triruthenium complex triangle Ru(III)(2)Ru(II)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-S) (1) incorporating simultaneous O,O- and gamma-C-bonded bridging acetylacetonate units. Synthesis,crystal structure,and spectral and redox properties

The reaction of mononuclear ruthenium precursor [Ru(II)(acac)(2)(CH(3)CN)(2)] (acac = acetylacetonate) with the thiouracil ligand (2-thiouracil, H(2)L(1) or 6-methyl -2-thiouracil, H(2)L(2)) in the presence of NEt(3) as base in ethanol solvent afforded a trinuclear triangular complex Ru(3)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-sulfido) (1). In 1, each ruthenium center is linked to one usual O,O-bonded terminal acetylacetonate molecule whereas the other three acetylacetonate units act as bridging functions: each bridges two adjacent ruthenium ions through the terminal O,O-donor centers at one end and via the gamma-carbon center at the other end. Moreover, there is a mu(3)-sulfido bridging in the center of the complex unit, which essentially resulted via the selective cleavage of the carbon-sulfur bond of the thiouracil ligand. In diamagnetic complex 1, the ruthenium ions are in mixed valent Ru(III)Ru(III)Ru(II) state, where the paramagnetic ruthenium(III) ions are antiferromagnetically coupled. The single crystal X-ray structure of 1 showed two crystallographically independent C(3)-symmetric molecules, Ru(3)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-S) (1), in the asymmetric unit. Bond distances of both crystallographically independent molecules are almost identical, but there are some significant differences in bond angles (up to 6 degrees ) and interplanar angles (up to 8 degrees ). Each ruthenium atom exhibits a distorted octahedral environment formed by four oxygen atoms, two from each of the terminal and bridging acetylacetonate units, one gamma-carbon of an adjacent acetylacetonate ligand, and the sulfur atom in the center of the complex. In agreement with the expected 3-fold symmetry of the complex molecule, the (1)H and (13)C NMR spectra of 1 in CDCl(3) displayed signals corresponding to two types of ligand units. In dichloromethane solvent, 1 exhibited three metal center based successive quasireversible redox processes, Ru(III)Ru(III)Ru(III)-Ru(III)Ru(III)Ru(II) (couple I, 0.43 V vs SCE); Ru(III)Ru(III)Ru(IV)-Ru(III)Ru(III)Ru(III) (couple II, 1.12 V); and Ru(III)Ru(III)Ru(II)-Ru(III)Ru(II)Ru(II) (couple III, -1.21 V). However, in acetonitrile solvent, in addition to the three described couples [(couple I), 0.34 V; (couple II), 1.0 V; (couple III), -1.0], one irreversible oxidative response (Ru(III)Ru(III)Ru(IV) --> Ru(III)Ru(IV)Ru(IV) or oxidation of the coordinated sulfide center) appeared at E(pa), 1.50 V. The large differences in potentials between the successive couples are indicative of strong coupling between the ruthenium ions in the mixed-valent states. Compound 1 exhibited a moderately strong charge-transfer (CT) transition at 654 nm and multiple ligand based intense transitions in the UV region. In the Ru(III)Ru(III)Ru(III) (1(+)) state, the CT band was slightly blue shifted to 644 nm; however, the CT band was further blue shifted to 520 nm on two-electron oxidation to the Ru(III)Ru(III)Ru(IV) (1(2+)) state with a reduction in intensity.     

单、双核钌羰基化合物Ru（CO）n（n=5，4，3）和Ru2（CO）n（n=9，8）的理论研究

采用两种密度泛函方法对中性单核Ru（CO）n（n=5,4,3）和双核Ru2（CO）n（n=9,8）化合物进行理论计算,优化出16个稳定异构体．研究发现,和Os（CO）5类似,Ru（CO）5存在两个能量接近的最低异构体．Ru（CO）4的能量最低异构体为C2v对称性的单态构型．Ru（CO）3能量最低异构体为G对称性的单态构型．Ru2（c0）。的两个能量接近的最低异构体分别含有单个桥羰基和3个桥羰基．双核不饱和Ru2（CO）8的能量最低异构体为含有两个桥羰基的单态Q构型．通过比较M2（CO）n（M=Fe,Ru,Os;n=9,8）的能量最低构型,发现Fe和Ru倾向于形成含有多个桥配位羰基的构型,而Os则更倾向于形成不含桥配位羰基的构型．对离解能的研究表明,和失去一个羰基生成Ru2（CO）8相比,Ru2（CO）9更容易离解为Ru（CO）5和Ru（CO）4．     

Synthesis of ruthenium particles by photoreduction in polymer solutions

Colloidal dispersions of poly(N-vinyl-2-pyrrolidone)-protected ruthenium (Ru) particles have been synthesized by the photoreduction of Ru(III) ionic solutions in the presence of photo-activator such as benzophenone and benzoin. The size and the structure of the synthesized particles have been extensively investigated by UV-vis, transmission electron micrograph (TEM) and extended X-ray absorption fine structure (EXAFS). Metallic Ru particles with an average diameter of 1.3 nm were successfully synthesized in the presence of benzophenone, although mixtures of partly oxidized Ru particles and metallic Ru particles were synthesized in the presence of benzoin. Photoreduction of Ru(III) ionic precursors to Ru atoms was promoted by ketyl radicals, which is more efficiently generated by the photoirradiation of benzophenone than by that of benzoin. The photoirradiation of benzophenone in the Ru(III) ionic solutions is an efficient and convenient method to produce metallic Ru particles in polymer solutions rather than the refluxing and the hydrothermal method of ionic solutions of Ru.     

丙酸水相加氢反应中Ru负载量对C-C键断裂的影响

考察了（1.0、4.0、6.0 wt.%）Ru/ZrO2催化剂的丙酸水相加氢性能。采用N2物理吸附、CO脉冲化学吸附、H2程序升温还原（H2-TPR）、CO和丙酸吸附傅里叶变换红外光谱（FTIR）研究了Ru/ZrO2催化剂的物理化学性质。CO-FTIR表明,Ru负载量增加,催化剂表面Ru粒子的富电子程度增加,更接近金属Ru的本征特性。丙酸FTIR表明,丙酸分子在Ru/ZrO2催化剂表面经解离吸附主要形成丙酰基和丙酸盐物种。随Ru含量增加,丙酰基更容易发生脱羰反应,导致C-C键断裂。     

Ru/CNFs 催化剂催化氨分解制氢

 研究了鱼骨式碳纤维 (CNFs) 和管式碳纤维 (CNTs) 负载 Ru 催化剂的氨分解反应活性. 结果表明, Ru/CNFs 催化剂上氨分解活性高于 Ru/CNTs 催化剂. 通过改变 Ru 负载量或载体表面的含氧基团来调节 Ru 的粒径. Ru 的活性位随着 Ru 颗粒尺寸的增大而增加. CNFs 上的含氧基团对 Ru 颗粒的氨分解活性影响很大. 在相同粒径的 Ru 颗粒上, CNFs 表面的含氧基团增加了 Ru 的活性.     

Photoinduced energy transfer coupled to charge separation in a Ru(II)-Ru(II)-acceptor triad

The bichromophoric system Ru-Ru(C)-PI ([(bpy)3Ru-Ph-Ru(dpb)(Metpy-PI)][PF6]3, where bpy is 2,2'-bipyridine, Hdpb is 1,3-di(2-pyridyl)-benzene, Metpy is 4'-methyl-2,2':6',2' '-terpyridine and PI is pyromellitimide) containing two Ru(II) polypyridyl chromophores with a N6 and a N5C ligand set, respectively, was synthesized and characterized. Its photophysical properties were investigated and compared to those of the monochromophoric cyclometalated complexes Ru(C)-PI ([Ru(dpb)(Metpy-PI)][PF6]), Ru(C)-phi-PI ([Ru(dpb)(ttpy-PI)][PF6], ttpy is 4'-p-tolyl-2,2':6',2' '-terpyridine), Ru(C)-phi ([Ru(dpb)(ttpy)][PF6]), and Ru(C) ([Ru(dpb)(Metpy)][PF6]). Excitation of the Ru(C) unit in the dyads leads to oxidative quenching, forming the Ru(C)(III)-phi-PI*- and Ru(C)(III)-Pl.- charge-separated (CS) states with k(f)(ET) = 7.7 x 10(7) s(-1) (CH3CN, 298 K) in the tolyl-linked Ru(C)-phi-PI and k(f)(ET) = 4.4 x 10(9) s(-1) (CH2Cl2, 298 K) in the methylene-linked Ru(C)-PI. In the Ru-Ru(C)-PI triad, excitation of the Ru(C) chromophore leads to dynamics similar to those in the Ru(C)-PI dyad, generating the Ru(II)-Ru(C)(III)-PI*- CS state, whereas excitation of the Ru unit results in an initial energy transfer (k(EnT) = 4.7 x 10(11) s(-1)) to the cyclometalated Ru(C) unit. Subsequent electron transfer to the PI acceptor results in the formation of the same Ru(II)-Ru(C)(III)-PI*- CS state with k(f)(ET) = 5.6 x 10(9) s(-1) that undergoes rapid recombination with k(b)(ET) = 1 x 10(10) s(-1) (CH2Cl2, 298 K). The fate of the Ru(II)-Ru(C)(III)-PI*- CS state upon a second photoexcitation was studied by pump-pump-probe experiments in an attempt to detect the fully charge-separated Ru(III)-Ru(C)(II)-PI*- state.     

Electronic coupling between two cyclometalated ruthenium centers bridged by 1,3,6,8-tetrakis(1-butyl-1H-1,2,3-triazol-4-yl)pyrene

A new bridging ligand 1,3,6,8-tetrakis(1-butyl-1H-1,2,3-triazol-4-yl)pyrene (ttapyr) was designed and synthesized by "click" chemistry. This ligand was used to construct a linear dimetallic biscyclometalated Ru(II) complex [(tpy)Ru(ttapyr)Ru(tpy)](2+) and a monometallic complex [(tpy)Ru(ttapyr)](+), where tpy is 2,2':6',2″-terpyridine. The electronic properties of these complexes were studied and compared by electrochemical and spectroscopic methods with the aid of DFT calculations. One-electron oxidation of [(tpy)Ru(ttapyr)Ru(tpy)](2+) with cerium ammonium nitrate produced a mixed-valent complex [(tpy)Ru(ttapyr)Ru(tpy)](3+). The intramolecular electronic coupling between individual metal centers was quantified by the intervalence charge transfer transition analysis. Mixed-valent complex [(tpy)Ru(ttapyr)Ru(tpy)](3+) exhibits a metal-centered rhombic EPR signal at 77 K with an average g factor of 2.203.     

Sensitization and stabilization of TiO(2) photoanodes with electropolymerized overlayer films of ruthenium and zinc polypyridyl complexes: a stable aqueous photoelectrochemical cell

Overlayer thin films of vinylbipyridine (vbpy)-containing Ru and Zn complexes have been formed on top of ruthenium dye complexes adsorbed to TiO(2) by reductive electropolymerization. The goal was to create an efficient, water-stable photoelectrode or electrodes. An adsorbed-[Ru(vbpy)(2)(dcb)](PF(6))(2)/poly-[Ru(vbpy)(3)](PF(6))(2) surface composite displays excellent stability toward dissolution in water, but the added overlayer film greatly decreases incident photon-to-current conversion efficiencies (IPCE) in propylene carbonate with I(3)(-)/I(-) as the carrier couple. An ads-[Ru(vbpy)(2)(dcb)](PF(6))(2)/poly-[Zn(vbpy)(3)](PF(6))(2) composite displays no loss in IPCE compared to ads-[Ru(vbpy)(2)(dcb)](PF(6))(2) but is susceptible to film breakdown in the presence of water by solvolysis and loss of the cross-linking Zn(2+) ions. Success was attained with an ads-[Ru(vbpy)(2)(dcb)](PF(6))(2)/poly-[Ru(vbpy)(2)(dppe)](PF(6))(2) composite. In this case the electropolymerized layer is transparent in the visible. The composite electrode is stable in water, the IPCE in propylene carbonate with I(3)(-)/I(-) is comparable to the adsorbed complex, and a significant IPCE is observed in water with the quinone/hydroquinone carrier couple. The assembly [(bpy)(2)(CN)Ru(CN)Ru(vbpy)(2)(NC)Ru(CN)(bpy)(2)](PF(6))(2) ([Ru(CN)Ru(NC)Ru](PF(6))(2)) adsorbs spontaneously on TiO(2), and electropolymerization of thin layers of the assembly to give ads-[Ru(CN)Ru(NC)Ru](PF(6))(2)/poly-[Ru(CN)Ru(NC)Ru](PF(6))(2) enhances IPCE and has no deleterious effect on the IPCE/Ru.     

Can a meso-type dinuclear complex be chiral?: dinuclear β-diketonato Ru(III) complexes

Dinuclear Ru(III) complexes, [Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)] (acacH = acetylacetone; dabeH(2) = 1, 2-diacetyl-1,2-dibenzoylethane) and [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)] (tbetH(2) = 1,1,2,2-tetrabenzoylethane) were synthesized by reacting [Ru(acac)(2)(CH(3)CN)(2)]PF(6) with dabeH(2) and tbetH(2) respectively, in toluene. The X-ray structural analysis of a meso-type dinuclear Ru(III) complex, ΔΛ-[Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)], showed that the bridging part became chiral due to the orthogonal twisting of two non-symmetrical β-diketonato moieties. To confirm this conclusion, the complex was resolved chromatographically to provide a pair of optical antipodes. Such chirality in the bridging part was not generated for [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)], because the β-diketonato moieties in tbet(2-) are symmetrical.